After downloading and installing Cordova/PhoneGap, I created a new xCode project.
After trying to follow the get started guide I cam to find that I have no 'www' folder to copy into xCode!
Am I going wrong somewhere?
(source: jonweb.co.uk)
(source: jonweb.co.uk)
You need to run the app once, the www folder will be created in your directory. You then just need to drag it into XCode to tell your project about it
did you start with 'Cordova-based Application'?
Related
I want to use google map to existing(not a new one) iPhone project.Now i am using Google map ios sdk and i successfully added google map framework to my project.But i got error like this
ld: framework not found GoogleMaps
clang: error: linker command failed with exit code 1 (use -v to see invocation)
How to solve this issue.I am using xcode4.5 and google map iOS sdk version is 1.5. When i am creating new project with google map iOS sdk then no error getting for me.Error only for existing iOS Project.Please help me.
I solved my issue
You need to do this
Click on your project (targets)
Click on Build Settings
Under Framework search paths (set your framework path)
Following information for getting framework search paths
Right click on your framework folder (for ex: GoogleMaps.framework)
select Get info
copy the path from General->where and paste this path in your framework search path (path should contain in single line)
Good luck
I encountered a scenario in which I had to import a project that was using Google Maps and noticed the same problem - module: "Google Maps" not found.
To solve this problem it was necessary to delete Podfile.lock and Podfile folder and re-install the pods again. Good luck !
You can also :
- remove GoogleMaps from Podfile
- pod install
- add GoogleMaps to your Podfile again
- pod install
This solution works for me, you can also check the search paths a well.
Clean your project. The shortcut is command + shift + k. This will clear information that xcode has stored that might imply that the sdk isn't included.
Also press the project icon at the top of the hierarchy of files, press the target that is your project, press build phases, open link with binary libraries, and make sure that the google maps sdk is in there. If it is not, press + and add it in.
Follow the steps :
Download GoogleMaps-iOS-1.1.0.zip from their site
Unzip the file. You now have a GoogleMaps-iOS-1.1.0 folder
In that folder you have a GoogleMaps.framework folder.
Copy or move the GoogleMaps.framework folder to inside your project folder (in Finder).
Drag the GoogleMaps.framework folder onto your Frameworks group in Xcode.
In the options sheet, uncheck "Copy items into destination group's folder". Make sure your target is checked in "Add to targets". Click OK.
(Note that you can also do this the other way, by not copying it into your project folder and checking "Copy items into destination group's folder". Xcode will copy the folder itself.)
Import using #import "GoogleMaps/GoogleMaps.h". The angle bracket usually work too, but in this case it should use quotes.
From : <GoogleMaps/GoogleMaps.h> file not found Google Maps SDK for iOS
my problem was fixed by adding in:
build settings
Framework Search Paths
clickable and add the following lines:
"${PODS_ROOT}/GoogleMaps/Base/Frameworks"
"${PODS_ROOT}/GoogleMaps/Maps/Frameworks"
If you use Pods
Left menu > Pods > Pods > choose Framework > right menu > copy path from "ios/....."
My: ios/Pods/GoogleMaps/Maps/Frameworks/GoogleMaps.framework
Then Project > Build Setting > Framework Search Path > Click on
$(PROJECT_DIR)/ios/Pods/GoogleMaps/Maps/Frameworks/GoogleMapsCore.framework
Sometimes it happens when you are migrating the code from one system to another so your Framework search paths look empty at this moment, so one simple solution I try is to reinstall the podfile and it works for me.
I've been struggling with this issue for hours; I'm using CocoaPods, Swift and Xcode 6.1.1. I followed all the steps for including GoogleMaps in my project carefully, tried many different things like removing symbolic links in the downloaded package or manually linking the binaries in build phases or trying #include "GoogleMaps.h", #include "GoogleMaps/GoogleMaps.h" and "#include <GoogleMaps/GoogleMaps.h> in my bridge file, none of that worked... Finally used CocoaPods instead of including the framework myself and it worked! Hope it helps someone out there:
In the Podfile:
pod 'Google-Maps-iOS-SDK', '~> 1.9.2'
And in your Bridge file:
#import "GoogleMaps.h"
Delete derived data and delete Podfile.lock file and then run pod install.
Maybe it'll be useful for anybody, next steps helped me:
1. Delete "Headers" and "GoogleMaps" folders manually (from the Finder).
2. Run 'pod install'
3. Re-build the project in Xcode.
In my case, I forgot that I need to open the workspace file with pods, not the project.
I have gone through this document :Getting Started with the Facebook SDK for iOS v3.1
I have successfully configured my Xcode project by following it.
But I want to do it without adding the Facebook.framework.
As previously we used to only add the "src" folder which we used to clone from :Facebook SDK for iOS - Github. Why can't I just copy the "src" folder and configure my project.
I want to play around with FBFriendPickerViewController.m (dot m) file. Which I am not able to view if I follow the standard tutorial. But is available in the "src" folder.
Please how can I do that ? And it also seems that FbGraph.h file doesn't exist.
Please help.
If you want to play with the source, go to:
https://github.com/facebook/facebook-ios-sdk/
After getting the code, run this script to build the framework locally:
<Install Location>/scripts/build_framework.sh
This will drop the framework in the folder:
<Install Location>/build
Follow the same instructions in the Getting Started to include the Facebook SDK, however, you will get the framework from your local build folder.
Note: You'll likely have to modify the build search path in Xcode if you're swapping out, say one of the sample projects (that was looking for the Framework in a particular place).
Since moving to XCode4, I have been getting errors like:
/VERSION: No such file or directory
cp: /javascripts/phonegap..js: No such file or directory
cp: /javascripts/phonegap..min.js: No such file or directory
error: /VERSION: No such file or directory
for projects that were working under XCode3.
Open XCodes Preferences, and navigate to Source Trees. If there is no PhoneGapLib entry there, try adding a new setting with the following values:
Setting Name: PHONEGAPLIB
Display Name: Phone Gap Lib
Path: /Users//Documents/PhoneGapLib
Note that the path should be to the location of your PhoneGapLib folder, and that it may not be in your documents folder, depending on how you installed PhoneGap.
I just learned about a great web service recently made available by Nitobi (makes of PG), which will automatically generate the necessary PhoneGap files you need for use in Xcode 4.
Just enter your project name, hit a button and they'll generate a zip file for you to download. This lets you set up a new project without messing with the command line.
You could set up a new project, then migrate your older project files over.
Did you search Google for this error?
I'm a bit of a noob with PhoneGap and Xcode still, but I know there have been recent issues with PG and Xcode 4. Perhaps you're experiencing the same issues as the commenters to this post: PhoneGap + XCode4 (and more specifically, here).
Today I started xcode and opened my project and the code is different, it have lost its colors, for each variable, nsstring ect..
when i build my project into my iphone, i dont get the GUI im making.. no matter what changes im making in xcode, im getting the GUI as when i builded it here in the morning..
What chould have happend and what can i do?
Thanks.
Delete your build folder and retry.
If you don't know where to find your Build folder got to:
/Users/%USERNAME%/Library/Developer/Xcode/DerivedData/%projectname*/
That is the default folder for XCode 4 to place the projects buildfolders in.
Edit***
Sorry, forgot one folder.
i have a weird problem .. maybe the solution is simple but i'm just a newbie in iPhone app development
the problem is:
i have created xcode iphone project , tested is and it was running well.
copied the project folder to my desktop . opened the project from the new location . tried to run the app, the simulator opens and the application crashes!!
any solution ? is there anything i need to clean in the project
files ?
Maybe you're using absolute paths in your code ?
Maybe something with additional resources you added before.
Try to look first for those kind of things.
In xcode, Go through every file in your project that resides within your project folder, right click on them in the hierarchy tree to the left, select get info, go to the general tab and change the Path Type to "Relative to Project"
What sort of project did you create?
I created a simple View-based application in my Documents folder. I built and ran it in the simulator successfully. I then quit Xcode, dragged the project folder to the desktop. I reopened the project and ran it successfully in the simulator again.
Did you make any changes at all to the project? I can't repeat what you've experienced. Is there anything different between what we did?
How about creating your project on the desktop in the first place? Does that work?
Are you running as an administrator account? Sometimes there are problems with Xcode if you run in an account where the user isn't a member of the Dev group.