I am trying to differentiate two populations. Each population is an NxM matrix in which N is fixed between the two and M is variable in length (N=column specific attributes of each run, M=run number). I have looked at PCA and K-means for differentiating the two, but I was curious of the best practice.
To my knowledge, in K-means, there is no initial 'calibration' in which the clusters are chosen such that known bimodal populations can be differentiated. It simply minimizes the distance and assigns the data to an arbitrary number of populations. I would like to tell the clustering algorithm that I want the best fit in which the two populations are separated. I can then use the fit I get from the initial clustering on future datasets. Any help, example code, or reading material would be appreciated.
-R
K-means and PCA are typically used in unsupervised learning problems, i.e. problems where you have a single batch of data and want to find some easier way to describe it. In principle, you could run K-means (with K=2) on your data, and then evaluate the degree to which your two classes of data match up with the data clusters found by this algorithm (note: you may want multiple starts).
It sounds to like you have a supervised learning problem: you have a training data set which has already been partitioned into two classes. In this case k-nearest neighbors (as mentioned by #amas) is probably the approach most like k-means; however Support Vector Machines can also be an attractive approach.
I frequently refer to The Elements of Statistical Learning: Data Mining, Inference, and Prediction, Second Edition (Springer Series in Statistics) by Trevor Hastie (Author), Robert Tibshirani (Author), Jerome Friedman (Author).
It really depends on the data. But just to let you know K-means does get stuck at local minima so if you wanna use it try running it from different random starting points. PCA's might also be useful how ever like any other spectral clustering method you have much less control over the clustering procedure. I recommend that you cluster the data using k-means with multiple random starting points and c how it works then you can predict and learn for each the new samples with K-NN (I don't know if it is useful for your case).
Check Lazy learners and K-NN for prediction.
Related
I've been learning about neural networks and most recently been trying out different clustering methods. But unlike KNN, GMM, or DBSCAN, there isn't a feature (in Matlab that I'm aware of) that identifies clusters for you. So I've been reading articles of how to interpret these plots, but I'm still confused. For my example, in the weight positions plot, I see one cluster. For the neighbor weight differences, I see one, maybe two clusters (yellow/bright - similar, red/dark - dissimilar). That seems to be confirmed when looking at the densities in the hits plot. There might be more, but I honestly I can't tell (I'm new at this) because of the gradient instead of a solid boundary between clusters. How many clusters do you see, and what's your logic? Thank you]1[]2[]3
selforgmap([5 5]
[net,tr] = train(net,x)
figure, plotsomnd(net)
figure, plotsomhits(net,x)
figure, plotsompos(net,x)
You may construct a new paradigm in relation with what the SOM nodes represent, i.e. they produce a new dataset. The new dataset is independent from the original dateset. Nevertheles, it is arranged somehow so that the underlying structure imitates that of the original dataset. Therefore, it is often found that people perform SOM with clustering algorithms such as K-means, Hierarchical Clustering, etc subsequently. This can be regarded as: instead of clustering directly from a huge amount of the original data, the clustering procedure is performed on a new version of the original dataset which is smaller but still inherits the topology of the original dataset. AFAIK, SOM is different from KNN in the sense that SOM is unsupervised whereas KNN is supervised.
I have used the ELKI implementation of DBSCAN to identify fire hot spot clusters from a fire data set and the results look quite good. The data set is spatial and the clusters are based on latitude, longitude. Basically, the DBSCAN parameters identify hot spot regions where there is a high concentration of fire points (defined by density). These are the fire hot spot regions.
My question is, after experimenting with several different parameters and finding a pair that gives a reasonable clustering result, how does one validate the clusters?
Is there a suitable formal validation method for my use case? Or is this subjective depending on the application domain?
ELKI contains a number of evaluation functions for clusterings.
Use the -evaluator parameter to enable them, from the evaluation.clustering.internal package.
Some of them will not automatically run because they have quadratic runtime cost - probably more than your clustering algorithm.
I do not trust these measures. They are designed for particular clustering algorithms; and are mostly useful for deciding the k parameter of k-means; not much more than that. If you blindly go by these measures, you end up with useless results most of the time. Also, these measures do not work with noise, with either of the strategies we tried.
The cheapest are the label-based evaluators. These will automatically run, but apparently your data does not have labels (or they are numeric, in which case you need to set the -parser.labelindex parameter accordingly). Personally, I prefer the Adjusted Rand Index to compare the similarity of two clusterings. All of these indexes are sensitive to noise so they don't work too well with DBSCAN, unless your reference has the same concept of noise as DBSCAN.
If you can afford it, a "subjective" evaluation is always best.
You want to solve a problem, not a number. That is the whole point of "data science", being problem oriented and solving the problem, not obsessed with minimizing some random quality number. If the results don't work in reality, you failed.
There are different methods to validate a DBSCAN clustering output. Generally we can distinguish between internal and external indices, depending if you have labeled data available or not. For DBSCAN there is a great internal validation indice called DBCV.
External Indices:
If you have some labeled data, external indices are great and can demonstrate how well the cluster did vs. the labeled data. One example indice is the RAND indice.https://en.wikipedia.org/wiki/Rand_index
Internal Indices:
If you don't have labeled data, then internal indices can be used to give the clustering result a score. In general the indices calculate the distance of points within the cluster and to other clusters and try to give you a score based on the compactness (how close are the points to each other in a cluster?) and
separability (how much distance is between the clusters?).
For DBSCAN, there is one great internal validation indice called DBCV by Moulavi et al. Paper is available here: https://epubs.siam.org/doi/pdf/10.1137/1.9781611973440.96
Python package: https://github.com/christopherjenness/DBCV
I have a data set which consists of data points having attributes like:
average daily consumption of energy
average daily generation of energy
type of energy source
average daily energy fed in to grid
daily energy tariff
I am new to clustering techniques.
So my question is which clustering algorithm will be best for such kind of data to form clusters ?
I think hierarchical clustering is a good choice. Have a look here Clustering Algorithms
The more simple way to do clustering is by kmeans algorithm. If all of your attributes are numerical, then this is the easiest way of doing the clustering. Even if they are not, you would have to find a distance measure for caterogical or nominal attributes, but still kmeans is a good choice. Kmeans is a partitional clustering algorithm... i wouldn't use hierarchical clustering for this case. But that also depends on what you want to do. you need to evaluate if you want to find clusters within clusters or they all have to be totally apart from each other and not included on each other.
Take care.
1) First, try with k-means. If that fulfills your demand that's it. Play with different number of clusters (controlled by parameter k). There are a number of implementations of k-means and you can implement your own version if you have good programming skills.
K-means generally works well if data looks like a circular/spherical shape. This means that there is some Gaussianity in the data (data comes from a Gaussian distribution).
2) if k-means doesn't fulfill your expectations, it is time to read and think more. Then I suggest reading a good survey paper. the most common techniques are implemented in several programming languages and data mining frameworks, many of them are free to download and use.
3) if applying state-of-the-art clustering techniques is not enough, it is time to design a new technique. Then you can think by yourself or associate with a machine learning expert.
Since most of your data is continuous, and it reasonable to assume that energy consumption and generation are normally distributed, I would use statistical methods for clustering.
Such as:
Gaussian Mixture Models
Bayesian Hierarchical Clustering
The advantage of these methods over metric-based clustering algorithms (e.g. k-means) is that we can take advantage of the fact that we are dealing with averages, and we can make assumptions on the distributions from which those average were calculated.
I have a dataset of n data, where each data is represented by a set of extracted features. Generally, the clustering algorithms need that all input data have the same dimensions (the same number of features), that is, the input data X is a n*d matrix of n data points each of which has d features.
In my case, I've previously extracted some features from my data but the number of extracted features for each data is most likely to be different (I mean, I have a dataset X where data points have not the same number of features).
Is there any way to adapt them, in order to cluster them using some common clustering algorithms requiring data to be of the same dimensions.
Thanks
Sounds like the problem you have is that it's a 'sparse' data set. There are generally two options.
Reduce the dimensionality of the input data set using multi-dimensional scaling techniques. For example Sparse SVD (e.g. Lanczos algorithm) or sparse PCA. Then apply traditional clustering on the dense lower dimensional outputs.
Directly apply a sparse clustering algorithm, such as sparse k-mean. Note you can probably find a PDF of this paper if you look hard enough online (try scholar.google.com).
[Updated after problem clarification]
In the problem, a handwritten word is analyzed visually for connected components (lines). For each component, a fixed number of multi-dimensional features is extracted. We need to cluster the words, each of which may have one or more connected components.
Suggested solution:
Classify the connected components first, into 1000(*) unique component classifications. Then classify the words against the classified components they contain (a sparse problem described above).
*Note, the exact number of component classifications you choose doesn't really matter as long as it's high enough as the MDS analysis will reduce them to the essential 'orthogonal' classifications.
There are also clustering algorithms such as DBSCAN that in fact do not care about your data. All this algorithm needs is a distance function. So if you can specify a distance function for your features, then you can use DBSCAN (or OPTICS, which is an extension of DBSCAN, that doesn't need the epsilon parameter).
So the key question here is how you want to compare your features. This doesn't have much to do with clustering, and is highly domain dependant. If your features are e.g. word occurrences, Cosine distance is a good choice (using 0s for non-present features). But if you e.g. have a set of SIFT keypoints extracted from a picture, there is no obvious way to relate the different features with each other efficiently, as there is no order to the features (so one could compare the first keypoint with the first keypoint etc.) A possible approach here is to derive another - uniform - set of features. Typically, bag of words features are used for such a situation. For images, this is also known as visual words. Essentially, you first cluster the sub-features to obtain a limited vocabulary. Then you can assign each of the original objects a "text" composed of these "words" and use a distance function such as cosine distance on them.
I see two options here:
Restrict yourself to those features for which all your data-points have a value.
See if you can generate sensible default values for missing features.
However, if possible, you should probably resample all your data-points, so that they all have values for all features.
What is the most popular text clustering algorithm which deals with large dimensions and huge dataset and is fast?
I am getting confused after reading so many papers and so many approaches..now just want to know which one is used most, to have a good starting point for writing a clustering application for documents.
To deal with the curse of dimensionality you can try to determine the blind sources (ie topics) that generated your dataset. You could use Principal Component Analysis or Factor Analysis to reduce the dimensionality of your feature set and to compute useful indexes.
PCA is what is used in Latent Semantic Indexing, since SVD can be demonstrated to be PCA : )
Remember that you can lose interpretation when you obtain the principal components of your dataset or its factors, so you maybe wanna go the Non-Negative Matrix Factorization route. (And here is the punch! K-Means is a particular NNMF!) In NNMF the dataset can be explained just by its additive, non-negative components.
There is no one size fits all approach. Hierarchical clustering is an option always. If you want to have distinct groups formed out of the data, you can go with K-means clustering (it is also supposedly computationally less intensive).
The two most popular document clustering approaches, are hierarchical clustering and k-means. k-means is faster as it is linear in the number of documents, as opposed to hierarchical, which is quadratic, but is generally believed to give better results. Each document in the dataset is usually represented as an n-dimensional vector (n is the number of words), with the magnitude of the dimension corresponding to each word equal to its term frequency-inverse document frequency score. The tf-idf score reduces the importance of high-frequency words in similarity calculation. The cosine similarity is often used as a similarity measure.
A paper comparing experimental results between hierarchical and bisecting k-means, a cousin algorithm to k-means, can be found here.
The simplest approaches to dimensionality reduction in document clustering are: a) throw out all rare and highly frequent words (say occuring in less than 1% and more than 60% of documents: this is somewhat arbitrary, you need to try different ranges for each dataset to see impact on results), b) stopping: throw out all words in a stop list of common english words: lists can be found online, and c) stemming, or removing suffixes to leave only word roots. The most common stemmer is a stemmer designed by Martin Porter. Implementations in many languages can be found here. Usually, this will reduce the number of unique words in a dataset to a few hundred or low thousands, and further dimensionality reduction may not be required. Otherwise, techniques like PCA could be used.
I will stick with kmedoids, since you can compute the distance from any point to anypoint at the beggining of the algorithm, You only need to do this one time, and it saves you time, specially if there are many dimensions. This algorithm works by choosing as a center of a cluster the point that is nearer to it, not a centroid calculated in base of the averages of the points belonging to that cluster. Therefore you have all possible distance calculations already done for you in this algorithm.
In the case where you aren't looking for semantic text clustering (I can't tell if this is a requirement or not from your original question), try using Levenshtein distance and building a similarity matrix with it. From this, you can use k-medoids to cluster and subsequently validate your clustering through use of silhouette coefficients. Unfortunately, Levensthein can be quite slow, but there are ways to speed it up through uses of thresholds and other methods.
Another way to deal with the curse of dimensionality would be to find 'contrasting sets,', conjunctions of attribute-value pairs that are more prominent in one group than in the rest. You can then use those contrasting sets as dimensions either in lieu of the original attributes or with a restricted number of attributes.