Related
I'm sure this has been asked countless times, and I've seen similar questions though the answer still eludes me.
I have an application with multiple view controllers and as a good view controller does its own task. However I find myself stuck in that I can't switch from one view controller to another. I've seen many people say "use a navigation controller" but this isn't what I want to use due to the unwanted view elements that are part and parcel to view controller.
I've done the following and have had limited success. The view controller is switched but the view does not load and I get an empty view instead:
- (IBAction)showLogin:(id)sender
{
PPLoginViewController *login = [[PPLoginViewController alloc] initWithNibName:#"PPLoginViewController" bundle:nil];
PPAppDelegate *appDelegate = [UIApplication sharedApplication].delegate;
appDelegate.window.rootViewController = login;
[self.view insertSubview:login.view atIndex:0];
}
Using UINavigationController as a rootViewController is a good tone of creating iOS application.
As i understand unwanted view elements is a navigationBar? You can just hide it manually, setting:
[self.navigationController setNavigationBarHidden:YES];
And about your case, if you want to change you current viewController(targeting iOS 6), you can just present new one:
[self presentViewController:login animated:YES completion:nil];
or add child (Here is nice example to add and remove a child):
[self addChildViewController:login];
Why to set UINavigationController as a root?
1) First of all it makes your application visible viewcontrollers to be well structured. (Especially it is needed on iPhone). You can always get the stack and pop (or move) to any viewController you want.
2) Why I make always make navigation as a root one, because it makes the application more supportable, so to it will cost not so many code changes to add some features to the app.
If you create one (root) viewcontroller with a lot of children, or which presents other viewcontrolls, it will make your code really difficult to support, and make something like gode-object.
Listen to George, UINavigationController is the way to go. Your reasons for not wanting to use it are not valid.
However, the reason your code doesn't work might have to do with the unnecessary line after setting the rootViewController to the login vc.
Per Apple's documentation, setting rootViewController automatically sets the window's view to the view controller's view.
I will like my application that always starts as the first time I open it. I have several view controllers and when I exit my application and I open it again I see the view controller where I left of. Maybe I have to call the method applicationWillTerminate method.
I use this code to open a new view:
UIViewController *control = [[SomeViewController alloc] initWithNibName:#"SomeViewController"
bundle:nil];
UINavigationController *navControl = [[UINavigationController alloc]
initWithRootViewController:control];
[self presentModalViewController:navControl animated:NO];
[navControl setNavigationBarHidden:YES];
[control release];
[navControl release];
this code works great when linking it to buttons. But when I place that code in the applicationDidBecomeActive method it does not work.
The easiest way is to set UIApplicationExitsOnSuspend in Info.plist.
That really isn't the expected behaviour, though. Users expect to see the app "where they left off", especially if they've only briefly left the app (e.g. because they got a phone call).
Your code snippet adds a view controller, but is unlikely to work since your app delegate is not a UIViewController. It also doesn't do anything about removing the old view controllers.
EDIT: If all you need to do is display a splash screen (or something), then it's something like this:
In -applicationDidEnterBackground:, add a "splash screen" view (not a view controller) to self.window. (iOS takes a "screenshot" after you return from -applicationDidEnterBackground: and uses this in the app-switch animation; you want this to be what the user sees when switching back to your app)
In -applicationWillEnterForeground:, do whatever animations you want and eventually remove the view from the window (call -removeFromSuperview).
EDIT 2: The same will work in -applicationWillResignActive:/-applicationWillBecomeActive:, except this happens on a sleep/wake event, which might not be what you want...
I'd avoid using view controllers for this, because trying to shoehorn a view controller in the view controller hierarchy is likely to be problematic (for example, you have to figure out which VC to present it from, and you have to do the "right thing" if the user backgrounds your app while the VC is on screen, and...)
The reason it doesn't work in applicationDidBecomeActive is that method is only sent to the Application delegate, which doesn't know about presentModalViewController.
I suggest instead that in your appDelegate, implement applicationWillEnterForeground:, which should restore the state to a newly launched application (equivalent to what the state is at the end of application:didFinishLaunchingWithOptions: ).
OR...(edits)
If you just want a certain viewController to run (which is still loaded, right?)...For example, if you have a tab controller and just want to go to the root of the first view controller, put the following code into applicationWillEnterForeground:
UITabBarController * myTabBar = self.tabBarController;
myTabBar.selectedIndex = 0;
[[myTabBar.viewControllers objectAtIndex:0] popToRootViewControllerAnimated:NO];
Temporary solution:
I made my application crash on applicationWillResignActive method and it works. My application needs to run an animation when I launch it. But this works because next time the application runs it starts like the first time I opened it.
I keep getting the following errors:
2011-04-02 14:55:23.350 AppName[42430:207] nested push animation can result in corrupted navigation bar
2011-04-02 14:55:23.352 AppName[42430:207] nested push animation can result in corrupted navigation bar
2011-04-02 14:55:23.729 AppName[42430:207] Finishing up a navigation transition in an unexpected state. Navigation Bar subview tree might get corrupted.
2011-04-02 14:55:23.729 AppName[42430:207] Finishing up a navigation transition in an unexpected state. Navigation Bar subview tree might get corrupted.
Here is what I am doing. From a view controller, I call the following when a certain button is pushed:
EventsViewController *viewController = [[EventsViewController alloc] init];
UINavigationController *navController = [[UINavigationController alloc] initWithRootViewController:viewController];
navController.navigationBar.tintColor = [UIColor blackColor];
[self presentModalViewController:navController animated:YES];
[viewController release];
[navController release];
Then, if a certain button is pushed in EventsController, I call:
SingleEventViewController *viewController = [[SingleEventViewController alloc] initWithEvent:[currentEvents objectAtIndex:indexPath.row]];
[self.navigationController pushViewController:viewController animated:YES];
[viewController release];
Then, if a certain button is pushed in SingleEventViewController, I call:
EventMapView* viewController = [[EventMapView alloc] initWithCoordinates];
[[self navigationController] pushViewController:viewController animated:YES];
[viewController release];
So yea, it's obvious that there's nested push animations, but isn't this the right way to go about it? I checked out Apple's DrillDownSave code and this appears to be how they're doing it. Does it matter that I use init methods instead of viewDidLoad methods?
Calling pushViewController before viewDidAppear is unsafe.
ACCIDENTLY TRIGGERING THE SAME SEGUE TWICE
Once in code, and once from interface builder, but both at the same time...
I was getting the same error as the rest of you. Only my problem was I was accidentally firing the same segue, twice. Once from interface builder, and once from within my code.
I have a UITableView. When a cell is selected, a segue in interface builder fires. Heres my problem, I had the segue set up to be directly fired off clicking the CELL ITSELf, inside interface builder, then in my code, I had under didSelectRowAtIndexPath, code that would fire that same segue... like so...
[self performSegueWithIdentifier:#"MySegue" sender:tableView];
That means when didSelectRowAtIndexPath gets called because a row was selected, it fires the segue with the above line of code. Then interface builder, also triggers the segue, because its connected directly to the cell object in interface builder. To stop interface builder from directly firing the segue. You have to connect the segue from the top of the view controller, not nested down inside coming off of the cell itself.
So if you are having this problem for the same reason as me, that is, you are calling the same segue twice, you can fix this by unlinking the connection from the CELL DIRECTLY, to your segue, and having the segue connection originate at the top of the table hierarchy in IB, rather than nested inside the cell. Connect the segue from you View Controller itself, to the segue. If you have done this correct, when you select the segue, it should highlight the ENTIRE view it is coming from, not just the cell.
Now Apples documentation states thus under the performSegueWithIdentifier:sender: reference:
Apps normally do not need to trigger segues directly. Instead, you configure an object in Interface Builder associated with the view controller, such as a control embedded in its view hierarchy, to trigger the segue. However, you can call this method to trigger a segue programmatically, perhaps in response to some action that cannot be specified in the storyboard resource file. For example, you might call it from a custom action handler used to process shake or accelerometer events.
In my case, I have a search button for my UITableView, and whether the segue is called when the search results table is present, or the normal table view is present, had to be determined. So I needed to trigger the segue directly.
So remove the embedded control from interface builder, and just stick it on the view controller itself, then trigger the segue in your code!
Now, no more double segues! And no more errors.
I had the same problem / error message as you did just now, was looking for a solution and ended up at this thread, however, for me I found that the solution is actually having only one animated:YES when doing a nested push (I put animated:YES only for the final push), hope this helps
cheers.
I've figured it out. Apparently if you call -pushViewController from outside of the -didSelectRowAtIndexPath method of a UITableViewDelegate, it doesn't work. Moving the call into that function worked. Weird.
I happened upon this same problem that resulted from a button in a nib being connected to two different actions. It tried loading both view controllers, thereby corrupting the stack.
What do you mean when you say you use init methods instead of viewDidLoad methods?
If you're pushing a new view controller before the old push has bad a chance to be actioned, you will get this sort of error. So putting certain code into init and doing things prematurely could certainly get you the error being reported.
At the point where init is being run on a view controller, the view hasn't been loaded yet!
Um I had this issue, and Im new to the whole iOS dev scene. But after looking at my connections inspector (with file's owner) in the interface builder i saw that as I had copied a button it had the previous buttons method assigned to it as well as the new method I had created. I guess that was where the nested aspect of my problem came from, as it was executing 2 different methods both of which pushed a view onto the Nav Controller. I know this has already been answered but I figured I would put this up just in case anyone else had a silly mistake like mine.
This has already been answered, but I thought this might help others as I got the same error but without using table views. I finally figured out the problem.
I had an existing button whose IBAction invoked a pushViewController. I had created a new button by copying the existing button. The new button also had an action that invoked pushViewController. When the new button was tapped (touch up inside) and the view controller was pushed, I got this error. I deleted the new button, created it from scratch, bound it to the existing outlets and actions, and the error went away.
Ran into the same problem. In my case I was missing a break in the switch statement so two segues were fired at the same time. Easy fix for me.
My problem had to do with the keyboard being active.
This was caused for me by pushing a ViewController from a textField's delegate method:
-(void)textFieldDidBeginEditing:(UITextField *)textField{
FilterLocationViewController *destViewController = (FilterLocationViewController *)[self.storyboard instantiateViewControllerWithIdentifier:#"FilterLocationViewController"];
[self.navigationController pushViewController:destViewController animated:YES];
}
By changing the code to this:
-(void)textFieldDidBeginEditing:(UITextField *)textField{
[_textFieldLocation resignFirstResponder]; //adding this line
FilterLocationViewController *destViewController = (FilterLocationViewController *)[self.storyboard instantiateViewControllerWithIdentifier:#"FilterLocationViewController"];
[self.navigationController pushViewController:destViewController animated:YES];
}
(adding the line [textField resignFirstResponder];) the problem went away.
Basically the lesson is that you shouldn't modify the navigationController stack if the keyboard is out.
Recently, I've faced the same problem. The reason was: -I was trying to pop view controller twice by mistake. you can check this crash by setting breakpoints on push and pop View controllers
1) Perhaps you could try passing the necessary variables as properties before pushing the UIViewController rather than using the init methods with parameters. Most likely you will need these parameters beyond your init method anyway.
Also, in your initWithCoordinates: method you are missing the parameters. Possibly your custom init methods are a part of the problem.
2) Just because you mentioned viewDidLoad -- this method is for initialization after a view has loaded . If you create the UIViewController in code, as it seems you do, you should use loadView to set up your subviews.
This was happening for me because of my UIControlEvents
[button addTarget:self action:#selector(callSecondView) forControlEvents:UIControlEventAllTouchEvents];
I had to change the UIControlEventAllTouchEvents to UIControlEventTouchUpInside or however you want your button to work if you had the issue because of a UIButton call.
My Solution was
[self performSelector:#selector(moveTo) withObject:nil
afterDelay:0.5];
Don't know about other's. I think most of the People using StoryBoard is facing such Problem. I am using XIB.
In my case The Problem Was, when I was moving to another view using push,
I was also using
[self.navigationController popViewControllerAnimated:YES];
in the ViewWillDisappear of the current View at the same time. Just remove it and it works fine.
I was using POP, because of the requirement and the Flow.
The Hierarchy was 1 -> 2 ->3
I was on view 2 and wanted to move to view 3. In that case I encountered this error.
In my case I was both setting the push segue from the storyboard and programatically. Hopefully that'll help anyone
I had this error message too, and the navigation bar and navigation controller transitions were weird. My setup was a bunch of Navigation Controllers embedded in a Tab bar Controller. The problem was that I didn't call super.viewDidLoad() in my Tab bar Controller implementation of viewDidLoad.
Calling super is something the docs clearly point out that you should do when overriding viewDidLoad, and I learned this the hard way.
Maybe this can help someone else too!
I know that this was answered, but it could help others.
I had the same problem, but it was caused because I was using a bad event for an info button.
I was using "UIControlEventAllTouchEvents" and this generated two push of the same view into the navigation controller. The correct event was "UIControlEventTouchUpInside". I'm new to iOS.
This resolves the problem:
https://github.com/nexuspod/SafeTransition
If you push (or pop) a view controller with animation(animated:YES) it doesn't complete right away, and bad things happen if you do another push or pop before the animation completes.
To reproduce this bug, try pushing or popping two view controllers at the same time. Example:
- (void)viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
UIViewController *vc = [[UIViewController alloc] init];
[self.navigationController pushViewController:vc animated:YES];
}
You will receive this error:
2014-07-03 11:54:25.051 Demo[2840:60b] nested push animation can
result in corrupted navigation bar 2014-07-03 11:54:25.406
Demo[2840:60b] Finishing up a navigation transition in an unexpected
state. Navigation Bar subview tree might get corrupted.
Just add the code files into your project and makes your navigation controller as a subclass of APBaseNavigationController, and you'll be good to do.
Just to complete the list, here is another reason which can cause "nested push animation can result in corrupted navigation bar":
I did setup several NavigationController within a TabBarController and set
the selectedIndex within the storyboard Identifiy Properties. After moving active Tab to Code error disappeared.
I load view controllers all the time in the following format:
-(void)loadSelectUser {
MyViewController *nextController = [[MyViewController alloc] initWithStyle:UITableViewStyleGrouped];
MyAppDelegate *delegate = [[UIApplication sharedApplication] delegate];
[delegate.navigationController pushViewController:nextController animated:YES];
[nextController release];
}
And I've never had an issue with that. But right now I'm dealing with the issue that the next view doesn't load completely. The navigation bar shows up and the viewDidLoad and the numberOfSectionsInTableView methods are both called. That is it. The table doesn't show up, it still shows the previous view.
I imagine this means there is a memory leak or something not connected properly. Is this the right path to be looking? If so, what is your best suggestion for debugging this issue. My code has no error messages so I'm not sure where to start. I load the view properly in a different controller, but for some reason it doesn't do it after this particular view*.
*This view happens to do a lot data manipulation with downloading objects, saving them and such. But again, it looks like it is all working properly. What would mess up the navigation controller loading the next view completely?
Oh, and just to mess things up more, some times, it works properly. But I run it one more time and it doesn't do it again.
Update: TechZen comment about the proper way to push a new view controller seemed to help a little. There is a higher rate of it working, unless I am pushing a tableviewcontroller. Depending on the action my view will push a UITableViewController or a UIViewController with a nib file. The second usually (not always) works.
Also, in a different view I am adding a modal view. But when I try to dismiss it using [self dismissModalViewControllerAnimated:YES]; it doesn't always work. Again it's hit or miss on it. Anyone have an idea of what would be causing the transition of windows to be finicky?
Calling the app delegate to get the navigation controller is unnecessary and risky. Any view controller on a navigation controller stack has a populated navigationController property so you can just use self.navigationController.
It's risky to call the app delegate's navigation controller because you have no guarantee that you will get the same navigation controller as the one that currently holds the view controller calling the push. You could in theory end up with two overlapping and conflict navigation controllers.
Switch the code to self.navigationController and see if that fixes the problem.
I've read numerous posts about people having problems with viewWillAppear when you do not create your view hierarchy just right. My problem is I can't figure out what that means.
If I create a RootViewController and call addSubView on that controller, I would expect the added view(s) to be wired up for viewWillAppear events.
Does anyone have an example of a complex programmatic view hierarchy that successfully receives viewWillAppear events at every level?
Apple's Docs state:
Warning: If the view belonging to a view controller is added to a view hierarchy directly, the view controller will not receive this message. If you insert or add a view to the view hierarchy, and it has a view controller, you should send the associated view controller this message directly. Failing to send the view controller this message will prevent any associated animation from being displayed.
The problem is that they don't describe how to do this. What does "directly" mean? How do you "indirectly" add a view?
I am fairly new to Cocoa and iPhone so it would be nice if there were useful examples from Apple besides the basic Hello World crap.
If you use a navigation controller and set its delegate, then the view{Will,Did}{Appear,Disappear} methods are not invoked.
You need to use the navigation controller delegate methods instead:
navigationController:willShowViewController:animated:
navigationController:didShowViewController:animated:
I've run into this same problem. Just send a viewWillAppear message to your view controller before you add it as a subview. (There is one BOOL parameter which tells the view controller if it's being animated to appear or not.)
[myViewController viewWillAppear:NO];
Look at RootViewController.m in the Metronome example.
(I actually found Apple's example projects great. There's a LOT more than HelloWorld ;)
I finally found a solution for this THAT WORKS!
UINavigationControllerDelegate
I think the gist of it is to set your nav control's delegate to the viewcontroller it is in, and implement UINavigationControllerDelegate and it's two methods. Brilliant! I'm so excited i finally found a solution!
Thanks iOS 13.
ViewWillDisappear, ViewDidDisappear, ViewWillAppear and
ViewDidAppear won't get called on a presenting view controller on
iOS 13 which uses a new modal presentation that doesn't cover the
whole screen.
Credits are going to Arek Holko. He really saved my day.
I just had the same issue. In my application I have 2 navigation controllers and pushing the same view controller in each of them worked in one case and not in the other. I mean that when pushing the exact same view controller in the first UINavigationController, viewWillAppear was called but not when pushed in the second navigation controller.
Then I came across this post UINavigationController should call viewWillAppear/viewWillDisappear methods
And realized that my second navigation controller did redefine viewWillAppear. Screening the code showed that I was not calling
[super viewWillAppear:animated];
I added it and it worked !
The documentation says:
If you override this method, you must call super at some point in your implementation.
I've been using a navigation controller. When I want to either descend to another level of data or show my custom view I use the following:
[self.navigationController pushViewController:<view> animated:<BOOL>];
When I do this, I do get the viewWillAppear function to fire. I suppose this qualifies as "indirect" because I'm not calling the actual addSubView method myself. I don't know if this is 100% applicable to your application since I can't tell if you're using a navigation controller, but maybe it will provide a clue.
Firstly, the tab bar should be at the root level, ie, added to the window, as stated in the Apple documentation. This is key for correct behavior.
Secondly, you can use UITabBarDelegate / UINavigationBarDelegate to forward the notifications on manually, but I found that to get the whole hierarchy of view calls to work correctly, all I had to do was manually call
[tabBarController viewWillAppear:NO];
[tabBarController viewDidAppear:NO];
and
[navBarController viewWillAppear:NO];
[navBarController viewDidAppear:NO];
.. just ONCE before setting up the view controllers on the respective controller (right after allocation). From then on, it correctly called these methods on its child view controllers.
My hierarchy is like this:
window
UITabBarController (subclass of)
UIViewController (subclass of) // <-- manually calls [navController viewWill/DidAppear
UINavigationController (subclass of)
UIViewController (subclass of) // <-- still receives viewWill/Did..etc all the way down from a tab switch at the top of the chain without needing to use ANY delegate methods
Just calling the mentioned methods on the tab/nav controller the first time ensured that ALL the events were forwarded correctly. It stopped me needing to call them manually from the UINavigationBarDelegate / UITabBarControllerDelegate methods.
Sidenote:
Curiously, when it didn't work, the private method
- (void)transitionFromViewController:(UIViewController*)aFromViewController toViewController:(UIViewController*)aToViewController
.. which you can see from the callstack on a working implementation, usually calls the viewWill/Did.. methods but didn't until I performed the above (even though it was called).
I think it is VERY important that the UITabBarController is at window level though and the documents seem to back this up.
Hope that was clear(ish), happy to answer further questions.
As no answer is accepted and people (like I did) land here I give my variation. Though I am not sure that was the original problem. When the navigation controller is added as a subview to a another view you must call the viewWillAppear/Dissappear etc. methods yourself like this:
- (void) viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
[subNavCntlr viewWillAppear:animated];
}
- (void) viewWillDisappear:(BOOL)animated
{
[super viewWillDisappear:animated];
[subNavCntlr viewWillDisappear:animated];
}
Just to make the example complete. This code appears in my ViewController where I created and added the the navigation controller into a view that I placed on the view.
- (void)viewDidLoad {
// This is the root View Controller
rootTable *rootTableController = [[rootTable alloc]
initWithStyle:UITableViewStyleGrouped];
subNavCntlr = [[UINavigationController alloc]
initWithRootViewController:rootTableController];
[rootTableController release];
subNavCntlr.view.frame = subNavContainer.bounds;
[subNavContainer addSubview:subNavCntlr.view];
[super viewDidLoad];
}
the .h looks like this
#interface navTestViewController : UIViewController <UINavigationControllerDelegate> {
IBOutlet UIView *subNavContainer;
UINavigationController *subNavCntlr;
}
#end
In the nib file I have the view and below this view I have a label a image and the container (another view) where i put the controller in. Here is how it looks. I had to scramble some things as this was work for a client.
Views are added "directly" by calling [view addSubview:subview].
Views are added "indirectly" by methods such as tab bars or nav bars that swap subviews.
Any time you call [view addSubview:subviewController.view], you should then call [subviewController viewWillAppear:NO] (or YES as your case may be).
I had this problem when I implemented my own custom root-view management system for a subscreen in a game. Manually adding the call to viewWillAppear cured my problem.
Correct way to do this is using UIViewController containment api.
- (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view.
UIViewController *viewController = ...;
[self addChildViewController:viewController];
[self.view addSubview:viewController.view];
[viewController didMoveToParentViewController:self];
}
I use this code for push and pop view controllers:
push:
[self.navigationController pushViewController:detaiViewController animated:YES];
[detailNewsViewController viewWillAppear:YES];
pop:
[[self.navigationController popViewControllerAnimated:YES] viewWillAppear:YES];
.. and it works fine for me.
A very common mistake is as follows.
You have one view, UIView* a, and another one, UIView* b.
You add b to a as a subview.
If you try to call viewWillAppear in b, it will never be fired, because it is a subview of a
iOS 13 bit my app in the butt here. If you've noticed behavior change as of iOS 13 just set the following before you push it:
yourVC.modalPresentationStyle = UIModalPresentationFullScreen;
You may also need to set it in your .storyboard in the Attributes inspector (set Presentation to Full Screen).
This will make your app behave as it did in prior versions of iOS.
I'm not 100% sure on this, but I think that adding a view to the view hierarchy directly means calling -addSubview: on the view controller's view (e.g., [viewController.view addSubview:anotherViewController.view]) instead of pushing a new view controller onto the navigation controller's stack.
I think that adding a subview doesn't necessarily mean that the view will appear, so there is not an automatic call to the class's method that it will
I think what they mean "directly" is by hooking things up just the same way as the xcode "Navigation Application" template does, which sets the UINavigationController as the sole subview of the application's UIWindow.
Using that template is the only way I've been able to get the Will/Did/Appear/Disappear methods called on the object ViewControllers upon push/pops of those controllers in the UINavigationController. None of the other solutions in the answers here worked for me, including implementing them in the RootController and passing them through to the (child) NavigationController. Those functions (will/did/appear/disappear) were only called in my RootController upon showing/hiding the top-level VCs, my "login" and navigationVCs, not the sub-VCs in the navigation controller, so I had no opportunity to "pass them through" to the Nav VC.
I ended up using the UINavigationController's delegate functionality to look for the particular transitions that required follow-up functionality in my app, and that works, but it requires a bit more work in order to get both the disappear and appear functionality "simulated".
Also it's a matter of principle to get it to work after banging my head against this problem for hours today. Any working code snippets using a custom RootController and a child navigation VC would be much appreciated.
In case this helps anyone. I had a similar problem where my ViewWillAppear is not firing on a UITableViewController. After a lot of playing around, I realized that the problem was that the UINavigationController that is controlling my UITableView is not on the root view. Once I fix that, it is now working like a champ.
I just had this problem myself and it took me 3 full hours (2 of which googling) to fix it.
What turned out to help was to simply delete the app from the device/simulator, clean and then run again.
Hope that helps
[self.navigationController setDelegate:self];
Set the delegate to the root view controller.
In my case problem was with custom transition animation.
When set modalPresentationStyle = .custom viewWillAppear not called
in custom transition animation class need call methods:
beginAppearanceTransition and endAppearanceTransition
For Swift. First create the protocol to call what you wanted to call in viewWillAppear
protocol MyViewWillAppearProtocol{func myViewWillAppear()}
Second, create the class
class ForceUpdateOnViewAppear: NSObject, UINavigationControllerDelegate {
func navigationController(_ navigationController: UINavigationController, willShow viewController: UIViewController, animated: Bool){
if let updatedCntllr: MyViewWillAppearProtocol = viewController as? MyViewWillAppearProtocol{
updatedCntllr.myViewWillAppear()
}
}
}
Third, make the instance of ForceUpdateOnViewAppear to be the member of the appropriate class that have the access to the Navigation Controller and exists as long as Navigation controller exists. It may be for example the root view controller of the navigation controller or the class that creates or present it. Then assign the instance of ForceUpdateOnViewAppear to the Navigation Controller delegate property as early as possible.
In my case that was just a weird bug on the ios 12.1 emulator. Disappeared after launching on real device.
I have created a class that solves this problem.
Just set it as a delegate of your navigation controller, and implement simple one or two methods in your view controller - that will get called when the view is about to be shown or has been shown via NavigationController
Here's the GIST showing the code
ViewWillAppear is an override method of UIViewController class so adding a subView will not call viewWillAppear, but when you present, push , pop, show , setFront Or popToRootViewController from a viewController then viewWillAppear for presented viewController will get called.
My issue was that viewWillAppear was not called when unwinding from a segue. The answer was to put a call to viewWillAppear(true) in the unwind segue in the View Controller that you segueing back to
#IBAction func unwind(for unwindSegue: UIStoryboardSegue, ViewController subsequentVC: Any) {
viewWillAppear(true)
}
I'm not sure this is the same problem that I solved.
In some occasions, method doesn't executed with normal way such as "[self methodOne]".
Try
- (void)viewWillAppear:(BOOL)animated
{
[self performSelector:#selector(methodOne)
withObject:nil afterDelay:0];
}
You should only have 1 UIViewController active at any time. Any subviews you want to manipulate should be exactly that - subVIEWS - i.e. UIView.
I use a simlple technique for managing my view hierarchy and have yet to run into a problem since I started doing things this way. There are 2 key points:
a single UIViewController should be used to manage "a screen's worth"
of your app
use UINavigationController for changing views
What do I mean by "a screen's worth"? It's a bit vague on purpose, but generally it's a feature or section of your app. If you've got a few screens with the same background image but different overlays/popups etc., that should be 1 view controller and several child views. You should never find yourself working with 2 view controllers. Note you can still instantiate a UIView in one view controller and add it as a subview of another view controller if you want certain areas of the screen to be shown in multiple view controllers.
As for UINavigationController - this is your best friend! Turn off the navigation bar and specify NO for animated, and you have an excellent way of switching screens on demand. You can push and pop view controllers if they're in a hierarchy, or you can prepare an array of view controllers (including an array containing a single VC) and set it to be the view stack using setViewControllers. This gives you total freedom to change VC's, while gaining all the advantages of working within Apple's expected model and getting all events etc. fired properly.
Here's what I do every time when I start an app:
start from a window-based app
add a UINavigationController as the window's rootViewController
add whatever I want my first UIViewController to be as the rootViewController of the nav
controller
(note starting from window-based is just a personal preference - I like to construct things myself so I know exactly how they are built. It should work fine with view-based template)
All events fire correctly and basically life is good. You can then spend all your time writing the important bits of your app and not messing about trying to manually hack view hierarchies into shape.