I'm using Vim on a Mac for front-end development and was recently hired at the company that uses Team Foundation Server as their version control system.
I would hate to have to switch to using Visual Studio on Windows because I'm so used to Vim and the Mac.
I found this and was hoping that would be a possible solution. I would still like to avoid editing code in Eclipse. However I wouldn't mind opening Eclipse to do version control stuff.
I'm very unfamiliar with Eclipse and Team Foundation Server (not VCS in general) and I need some advice on how to actually use it.
I'm able to connect to the server and find the project I have to work on, but from here I'm lost. This is the window I'm stuck at.
Anyone who are in a similar situation and could offer some help?
You've done the hard bit I think, firstly you should be able to safely ignore the Work Item and Build "folders" unless someone explicity tells you to use work items, at which point they can show you what you need to know as it works exactly the same as in Visual Studio.
If you double click on the Source Control folder it will open a new window which will show you the source "tree". To be able to Get, Checkout and add source files to the tree you'll need to set up a workspace. Once you've done this then you can get the code and check out.
With Team Explorer Everywhere You also have the option of using the tf command line in the Mac terminal. This would eliminate the need for eclipse. (I'm assuming that as a Vim user you're not afraid to use the terminal)
Another option might be svnBridge however I think you need the server version if you're using a Mac, and this requires a site to be installed in the TFS application server which might not be an option.
Finally TFS now offers support for integration with GIT.
I have tried a lot but not been able to understand the steps involved in debugging a PHP website residing on a remote server with eclipse Indigo PDT and Xdebug. Following is my configuration.
Remote:
LAMP, Xdebug(fully setup)
Local:
LAMP, Eclipse PDT with RSE,
My main problem is about the setup that I need to do locally with eclipse to be able to debug the remote website.
Specifically:
Do I need to create a new eclipse project locally? If yes, where should I load the source files from and how? Do I need an exact copy of the source files as on the server?
Do I need to have all the files locally before I can start debugging? I copied only index.php to a local project and started debugging. I received the remote connection when I started debugging the website and could step through index.php, but not after that. If I don't need to have all the source files locally beforehand, how can I set a break point in a file that is reached after 20 function calls?
What other settings need to be setup to link the local and remote projects. Do I need to add a new PHP server? What should be the settings of the debug configuration?
I know about sshfs and tried to set it up using this link:
http://www.docplanet.org/php/how-to-debug-php/
but eclipse took forever to build project files on the server and hung.
I have looked all over. A good link to go with the answers will be appreciated.
Thank you.
I posted the question on eclipse forums too and got an answer:
http://www.eclipse.org/forums/index.php/mv/msg/365474/890896/#msg_890896
So here are the answers:
Yes, you need source files and an eclipse project locally. No debugger delivers source files. I read on SO that for PHP we only need the lines that are being debugged to be same, while for C# the whole project has to be a copy.
Yes, you need the files locally and set your break point in them.
One thing I found is that you don't need to start the debugger like we do with normal projects. Eclipse starts accepting the debugging connection the moment you setup the debugger.
So you just need to open the webpage with debugging enabled and eclipse will catch the connection and let you know.
I am getting the above error when launching a python file that worked in the past. I think I know how this happened but not sure how to fix it. I have 2 computers dual booting different os and use dropbox to stay synced between them all. In the past I synced my eclipse workspace with my mac and windows computers this way and everything worked fine(except I would have to change the location of the python interpreter depending on what system I was using).
I started getting the above message after I added a linux(fedora) to share dropbox files. But my problem is now when I try to update my python interpreter(in windows) it doesn't save my setting. I can hit autoconfig and it'll find the python path and all the files and I hit apply/okay, but when I go back its all blank. I'm pretty sure the linux machine messaged my settings up, but I need to develop on all 3 boxes so I need them to be kind of synced.
Wondering how to fix this and if there's another way to do this so I don't have this problem in the future?
update: this def. has something to do with my workspace. When I change the default workspace to a new folder and set the python interpreter it works. Still not sure how to permanently fix this(don't want to have to copy code back and forth to new workspaces.
I think an answer of how to share workspace among other enviroments is still very helpful but if anyone is having a simlair problem and just needs to fix it to work quickly here's the solution:
go to File, switch workspaces and figure out where your workspace is located
Go to that folder and rename the .metadata folder and relaunch eclipse
In eclipse everything will be missing, so go to file-->import and import the folder with all your projects(do the root folder of all the projects so you don't have to import each one individually).
setup any customizations you had before
This is not the best solution but it works. Hopefully someone else has a way of preventing this problem from happening in multiple environments.
It seems the preferred way is through F9: http://pydev.org/manual_adv_launch.html
eclipse run as same as what it run last time.
then first time run in this way.
in package explorer (left).
doubleclick res then menu.
then rightclick main menu (name.xml).
frmo menu select run then run as application.
and you can run as default in next time(from menu or shortcut).
This problem can often be solved by exiting out of eclipse and restarting (if that happens to be convenient for you). Changing workspaces midstream can often confuse Eclipse even if PyDev is correctly configured.
I was trying to add the PDT,
Indigo - http://download.eclipse.org/releases/indigo
Unable to read repository at http://download.eclipse.org/releases/indigo.
Unable to read repository at http://download.eclipse.org/releases/indigo.
http://download.eclipse.org/releases/indigo is not a valid repository location.
So what's the correct url ? I went and looked lots of places. Can someone point me to the exact link ?
Edit :
Problem once you go to http://download.eclipse.org/releases/indigo , you will see the below error. So I guess its moved somewhere.
This software repository URL, http://download.eclipse.org/releases/indigo/ , provides access to the software repository for the Eclipse indigo release. Until its released in June 2011, it will contain milestone builds.
The repository site URL is typically pre-populated in the list of software repositories when you install the Eclipse Platform or SDK.
For more information about installing or updating software, see the Eclipse Platform Help.
There is also a collection of handy, downloadable all-in-one zip files available for many interests and platforms. Many people find these all-in-one packages the easiest way to get started.
Can you connect to internet at all through Eclipse?
Open the internal webbrowser. In Eclipse: Window -> show view -> Other -> General: Internal web browser.
Look up any normal adress, is it working?
Can you connect to another update site? Try for example Eclipse Emma:
http://update.eclemma.org/
Do you see anything there?
What are your proxy preferences? Go to Window -> preferences -> General: Network connections.
The active provider:
Specifies the settings profile to be used when opening connections. Choosing the Direct provider causes all the connections to be opened without the use of a proxy server. Selecting Manual causes settings defined in Eclipse to be used. On some platforms there is also a Native provider available, selecting this one causes settings that were discovered in the OS to be used.
If internet is working fine outside of Eclipse, try changing to Native. After that, try Direct.
I have encountered problems where an update site would not load, then I had to remove it and add it again. This forces Eclipse to reread the contents of the site even if it has a cached copy. So, if you still get no connection to the indigo update site, but everything else is working, try that. Go to Window -> Preferences -> Install/update: Available Software sites. Then remove and add the indigo site. Just remember to copy the adress so you can add it again.
As suggested in a comment below by #lostiniceland, this is a simpler way to achieve the above:
Goto Window -> Preferences -> Install Update -> Available Software Sites => select the entry and click the "Reload" button to the right. This is sometimes also helpful when you have a local updatesite for testing custom plugins
I had the same problem and resolved it by
Deleting the cache directory \eclipse\p2\org.eclipse.equinox.p2.repository\cache
Refreshing the repositories.
Preferences -> Install Update -> Available Software Sites => select the entry
Click the "Reload"
Check if you are able to connect to eclipse market place url (http://marketplace.eclipse.org/) from browser. If its working then the issue is because of proxy server using in your network.
We have to update eclipse with proxy server details used in our network.
Go to :- Windows-> Preference -> General -> Network Connections.
And edit HTTP ,with proxy details.
Click OK
Done.
I was having this problem and it turned out to be our firewall. It has some very general functions for blocking ActiveX, Java, etc., and the Java functionality was blocking the jar downloads as Eclipse attempted them.
The firewall was returning an html page explaining that the content was blocked, which of course went unseen. Thank goodness for Wireshark :)
Another way to solve this kind of error is to start eclipse with this argument
-vmargs -Djava.net.preferIPv4Stack=true
Working fine with Eclipse (x64) 4.3.1
Had this problem in Linux, and I found that the user doesn't have permission to update the eclipse directory
change the owner of eclipse folder recursively, or run eclipse with user who has write permission to the folder
In Windows 7 32-bit version, I started the eclipse with as an administrator. This worked for me.
I had the same problem. Try to deactivate your Firewall (I had avast!), which worked for me.
(Sorry for my English I'm French :D)
Please make sure you are using correct url. If You are using url - http://download.eclipse.org/releases/indigo on your eclipse luna(v4.4) then it might be not working in this case you should use - http://download.eclipse.org/releases/luna
I have tried this and its working.
What worked for me:
Since yesterday, I have been trying to install the Eclipse plugin - "Remote System Explorer" from the Eclipse marketplace on a freshly downloaded Eclipse 4.8 as shown below,
and everytime I was getting this error:
Unable to read repository at http://download.eclipse.org/releases/kepler/.
Unable to read repository at http://download.eclipse.org/releases/kepler/201306260900/content.jar.
download.eclipse.org:80 failed to respond
which brought me to this SO post.
I tried a few solutions mentioned here in the different answers like this one and this one and this one, but none of them worked. I just gave up almost, thinking that either the corporate network here is somehow blocking the specific download requests or the 4.8 version of Eclipse is buggy.
Discovery:
I could not reload all the paths under 'Window' -> 'Preferences' -> 'Install/Update' -> 'Available Software Sites'.
Preconditions:
What did work for me from the beginning was:
I could open google.com from the internal web browser of eclipse and,
some of the update paths, I could reload even. (As was mentioned as a possible solution or test, in some of the answers here, like this one.)
Finally, this answer put me on the right track - for my specific case, at least. Just my step was to do the exact opposite of what that answer was doing.
Solution:
I had to change all the http:\\ paths to https:\\ and suddenly it started to work. I don't know who - either IE/Edge on Windows 10 or the Windows 10 firewall or the company firewall is blocking HTTP communications. But with HTTPS, I can finally install plugins from the Marketplace.
HTTPS reload works
I must say, what is strange is that not all the paths required https. Except a few, the rest seemed to have had no problem working with HTTP. But I anyways changed all to HTTPS, just for good measure.
Then reload all the repositories one by one. Press "Apply and close".
Then check for updates. Eclipse will update itself successfully now.
Restart after update.
Finally you can install whichever Plugin you would like to from the Eclipse Marketplace.
Note: In case during the update, this same error pops up again, then see in the repositories that any new paths added by eclipse during the update, are also HTTPS and not HTTP.
Kudos to #Fredrik above. His answer didn't work for me, but lead me to the resolution of my issue:
In 'Window'|'Preferences'|'Install/Update'|'Available Software Sites'. The location that I was attempting to install from the 'Marketplace' was getting inserted with an https:// URL. Editing this to http:// allowed me to then use 'Help'|Install New Software ...' to select the repository from the drop down 'Work with:' combobox instead of having the https:// one automatically inserted and used.
For eclipse, there are normally different options available:
If you want to use the PHP development environment (only), you should go with the corresponding distro of eclipse. There is a distro for PHP provided by Zend.
You may add PDT to an indigo release by doing the following steps:
Check if an update site for PDT is included in your eclipse installation:
Open the Help > Install New Software dialog.
Click there on the link Available Software Sites.
In the list, the URL http://download.eclipse.org/releases/indigo should be marked.
Close the dialog.
Select from the Work with list the site with the right URL.
Enter in the filter box PDT and search in the list for the PDT tooling you want to install.
Install the PDT tooling.
If that does not work, you may download a complete update site from the PDT project site.
Visit the site (URL above).
Click on downloads.
Search there for the string "all in one update site".
Download the zip file.
Install it in your Indigo installation. Help > Install New Software > Add... > Enter name and select from button Archive the zip file
I hope some of the installation instructions will work for you.
This is the correct URL. Chances are Eclipse cannot read it properly because of the Internet connexion.
Are you using a proxy to get Internet access? If this is the case you need to notify Eclipse via the "Preferences/General/Network Connections" menu.
That URL works fine. The message you report is normal when you look at it in a browser. My copy of Eclipse has no problems talking to it. If yours does, I suspect a proxy configuration error in your copy of eclipse.
Also try it by turning off the firewall, and similar services. It worked for me!
If you can't access https://dl-ssl.google.com/android/eclipse/ simply
try to use http://
instead of https://
I spent whole my day figuring out this and found the following. And it works great now.
This is basically an issue with your gateway or proxy, If you are under proxy network, Please go to the network settings and set the proxy server settings(server, port , user name and password). If you are under direct gateway network, your firewall may be blocking the http get request from your eclipse.
I was also unable to read the repository. Even after the disabling most of the entries under Available Software Sites things were still not working.
I had no proxy to worry about and even disabling the firewall (which I do not recommended) as a last resort did not help.
Viewing the error log, from the dialog box which Eclipse displayed, there was mention of a cache directory under .eclipse in my home directory. I deleted the two cache directories I found and Eclipse was working again.
For my setup the two directories I deleted were:
.eclipse/org.eclipse.platform_4.4.2_119745494_macosx_cocoa_x86_64/p2/org.eclipse.equinox.p2.core/cache
.eclipse/org.eclipse.platform_4.4.2_119745494_macosx_cocoa_x86_64/p2/org.eclipse.equinox.p2.repository/cache
NB: My setup is Eclipse Luna 4.4.2 running on Mac OS X Yosemite 10.10.3
In my case, I discovered that the major issue why my eclipse won't connect to internet is my Internet Service Provider. I was only able to browse some websites but unable to browse other website. Fixing the issue with the ISP worked.
My issue was the Eclipse Marketplace client needed updating.
After trying Fredriks solution of
Go to Window -> Preferences -> Install/update: Available Software sites. Then remove and add the indigo site. Just remember to copy the adress so you can add it again.
The Marketplace client wouldn't load. But I could access it via a browser.
So, I went to the Help -> Eclipse Marketplace
it loaded fine
Clicked on Installed and found the Eclipse Marketplace Client and it had so i clicked it it updated and then when I did the standard update everything worked.
Sometimes, there will be firewalls and restrictions in the network preventing the plugin to get downloaded. We can try some other network. This actually resolved my issue.
I was facing the issue while adding team explorer plugin to eclipse from https://marketplace.eclipse.org/content/team-explorer-everywhere.
Used team explorer plugin for ecplise for internal use of xamarin for mac.
Error:
unable to read repository at http://marketplace.eclipse.org/content/team-explorer-everywhere
org.eclipse.equinox.p2.core.provisionexception unable to read repository
Unknown host exception
Goto https://github.com/microsoft/team-explorer-everywhere/releases
Download: TFSEclipsePlugin-UpdateSiteArchive-14.135.0.zip
From Eclipse->Help->Install new software.
From Add Repository window select Archive select the downloaded zip file.
Continue installation.
Also try if in the eclipse paths there is some duplicated
Luna - http://download.eclipse.org/releases/luna
Luna - http://download.eclipse.org/releases/luna/1234567...
Try both of them, one may work.
In my case, with 2 eclispes installed, in one of them the path
Luna - http://download.eclipse.org/releases/luna
works, in the other one, i must select:
Luna - http://download.eclipse.org/releases/luna/123456...
In both the internal browser can access to internet. Both are Luna (but one is RCM, the other one i don't remember).
No meu caso era o anti-vírus que estava bloqueando a conexão do eclipse, desativei o anti-víruse tudo funcionou o//.
Translation:
In my case it was the anti-virus that was blocking the connection from eclipse. I disabled the anti-virus and everything worked.
Is it possible to activate full autocompletion without having the file added to a project?
Maybe with a plugin or any another modification?
I installed the plugin "remote file systems" for netbeans 6.9.1 (php)
(http://www.stoehrer.net/downloads/remotefs/nb-remotefs-0.1.3.zip) to access my linux server over ssh on my windows machine.
Autocompletion doesn't work with it - the files have to be in a netbeans project :(
I also tried the mounting tool "dokan" but sometimes it destroys a file when I save.
Other mounting tools work less well or just show my home folder.
Sorry for my english and thx for your answer.
coudnt solve the problem that way
so i used samba and add the files to a netbeans project
wasnt easy because for some reason
i have to use the ip path ("\\192.168.xx.xxx" and type my smbuser and the password)
to map the drive in windows
on my other pc i didnt need that. dont know why
bye guys
There is an open bug, or as they have called it, the umbrella issue #135222, to aggregate requests and ideas regarding how to
Improve support for editing files that do not belong to a project.
I have just added the suggestion of somehow allowing to define a classpath for files that don't belong to any project. I hope I can soon update this answer with a "there is a better way..." ;-)