My knowledge of Perl is nil but I was trying to install Bugzilla and everything seem to be going along find until I went to load Bugzilla and I got this error followed by the html of the page trying to be loaded.
dmake could not be found on the PATH. Please invoke it using the full pathname:
C:\Perl64\site\bin\dmake.exe
or put the Perl\site\bin directory on the PATH with:
path C:\Perl64\site\bin;%PATH%
I tried running the command and also added the pathname manually into the Path Environment Varaible but I'm still receiving the error. It could be something as simple as I'm not putting the pathname correctly into Path.
Any help would be much appreciated.
Embarrassingly for me, restarting the computer did the trick. I suspect the Path Environment Variables hadn't taken effect so a restart was required to fix this.
Related
I've scoured other forums that talk about this problem and have tried all of the recommendations I've found, but I cannot seem to get VSCode to recognize my Julia.exe path and execute commands in a .jl file. Every time I run even a simple .jl file, I get /bin/sh: julia: command not found (pictured below).
I have ensured that the executable path is set properly in the .json file, and have tried moving the executable to other locations (using an M1 Mac), but it seems it still cannot find/recognize the Julia.exe:
I have even tried just pointing to the binary folder /bin, and /bin/julia.exe (with the extension), and though VSCode does not generate the error when it cannot confirm the .exe path, the actual code still generates the error above.
I'm at my wits end here. I'm sure it's a simple answer that someone could spot in a second, or know the troubleshooting for, but I've never had this issue to this degree before with installing other languages like Kotlin. Any help is greatly appreciated.
Problem was fixed by the MacOS recommendation found here:
julialang.org/downloads/platform/#optional_add_julia_to_path
Copying the binary .exe elsewhere (outside of /Applications) and changing the executable path in VSCode fixed the issue.
I'm new to cmder so excuse me if it's a basic question.
So when I open cmder, I keep getting these PATHS as "were unexpected at this time"
An image for the paths that load on startup:
I tried to extract cmder to another folder, delete them from user/system variables and add them according to cmder-github-wiki but I kept getting the same bug/error/hint or whatever it is.
I don't know if it affect my workflow or not but I hate seeing errors before I begin anything! xD
1:
Try the following:
Check your PATH variable for syntax errors, especially near any occurance of Python related things.
Check something like an "autostart.bat" that CMDer runs at every start. The culprit may be located there, near any occurance of PATH or invoking files or directories which do not exist anymore.
Please clarify: What exactly are you invoking and in which directory, to start CMDer / to get this output? Which files did you edit and what are the contents of those files?
As last resort try uninstalling and reinstalling CMDer. The execution is probably broken since the move to another directory you described and the problem might be hard to track.
I want to intstall the ext "my_redirects". On my local machine it does what it should. But now, on the live site, i got this error:
1: PHP Warning: file_get_contents(/kunden/homepages/28/d574274134/htdocs/update7/typo3/sysext/core/Resources/Private/Sql/Cache/Backend/Typo3DatabaseBackendCache.sql): failed to open stream: No such file or directory in /homepages/28/d574274134/htdocs/update7/typo3_src-7.6.14/typo3/sysext/core/Classes/Cache/Backend/Typo3DatabaseBackend.php line 441
I got a hint to delete the typo3temp/autoload/ files. Then the installation works, but if i after that go into the install tool, i get this error again. Can someone give a hint?
This file is part of the core and must exist. Look into the src-tar/zip file. Maybe the file wasn't transferred to the server.
I don't think it's an autoload issue, because the .sql file is missing, not the PHP class.
Please verify that the sql file does exist. If it's missing, check the hash of your downloaded TYPO3 core. Make sure you compare the correct path on the server.
But I guess you got an access restriction. Maybe bad ownhership of that .sql file? Perhaps you ran into some security problems with file_get_contents() and at least sql files? So please also check your security settings.
I am new for centos installation. I downloaded a minimul version of centos 6.5, around 339.7mb of size. I am trying to install this with GUI interface but I got an error after selecting the drive option, which comes after selecting the country.
This is complete message,
Unable to read package metadata. This may be due to missing repodata directory. Please ensure that your install tree has been correctly generated.
Failare:
repodata/743fec56b2af0ce8d6ec82c47a4efafc2a4d18cddfa9683f29611cb18d1a33de-primary.sqlite.bz2 from anaconda-CentOS-201311271240.i386: [Ermo 256] No more mirrors to try.
Sorry but I am new here, so I can't put the exact image here.
I believe that i had this same issue and was able to solve it.
The files under the /repodata folder are missing their file extensions and are not matching their full names in the "TRANS.TBL" file, under this same dir.
Rename all the files to match what is in the "TRANS.TBL" file, then try the install over again.
Please let everyone know if this works for you.
In the past i would just put a URL in that pointed to the correct files on a server, i feel that most people take this workaround and that's why it's not as hot of an item as it should be. I hope this gets fixed in the .ISO.
Thank you,
YourFriend
It worked for me.
I renamed all 8 files.
i.e. 0e371b19e547b9d7a7e8acc4b8c0c7c074509d33653cfaef9e8f4fd1d62d95de
0e371b19e547b9d7a7e8acc4b8c0c7c074509d33653cfaef9e8f4fd1d62d95de-primary.sqlite.bz2
The correct file name is given in file "repomd" under folder repodata
example - location href="repodata/b124f0ec5323cfee56b420906a3103f0daef656dde3f7ac8220120aa7504e57a-primary.xml.gz"
I had exactly the same issue ;
under "repodata" directory opened "repmod" xml file
Searched file name within repmond xml file
Found matching strings
Renamed 8 files as specified in .xml file
and it worked like a charm
Thanks to "Your Friend"
I had the same problem. Even if you manage to get past this step, you will encounter at a later point other errors related to filenames.
The root cause was using Unetbootin to create the bootable media. I switched to Rufus and everything works fine now.
Something has gone wrong with my java set-up on my computer, obviously, but I can't figure out what it is until I get some more info.
When I try to run Eclipse, it give me an error:
Failed to load the JNI shared library "C:\Eclipse\1234\tools\jdk1.5.0_14\bin\..\jre\bin\client\jvm.dll"
I want to know how to find out what the rest of that filepath is. "\bin..\jre\" doesn't help me much. I suspect that it's 2 paths concatenated, but I'm not sure.
I've tried running Eclipse from the command line, but the error shows up only in the popup window.
Also, where does the JNI path get set, anyway?
I've looked at my JAVA_HOME environment variable, but it only contains "C:\Program Files\Java\jre7\bin".
This JNI-path-corruption... thing happened after I ran an installer -- nope, no uninstaller :(
C:\Eclipse\1234\tools\jdk1.5.0_14\bin\..\jre\bin\client\jvm.dll
I want to know how to find out what the rest of that filepath is. "\bin..\jre\" doesn't help me much. I suspect that it's 2 paths concatenated, but I'm not sure.
That is the full path. On all file systems that I've used ".." indicates the parent directory (i.e. up one directory). So the path refers to:
C:\Eclipse\1234\tools\jdk1.5.0_14\jre\bin\client\jvm.dll
As for how eclipse has decided on trying to use this path, I'm not sure.
your JAVA_HOME settings are wrong , as JAVA_HOME should point to the directory just above bin , and in the bin directory java executable files e.g. java.exe , javac.exe , appletviewer.exe must exist.
For example, if on my computer java.exe is in D:\JAVA7\bin directory my JAVA_HOME will be D:\JAVA7