I have a document containing many percent, plus, and pipe signs. I want to replace them with a code, for use in TeX.
% becomes \textpercent.
+ becomes \textplus.
| becomes \textbar.
This is the code I am using, but it does not work:
sed -i "s/\%/\\\textpercent /g" ./file.txt
sed -i "s/|/\\\textbar /g" ./file.txt
sed -i "s/\+/\\\textplus /g" ./file.txt
How can I replace these symbols with this code?
Test script:
#!/bin/bash
cat << 'EOF' > testfile.txt
1+2+3=6
12 is 50% of 24
The pipe character '|' looks like a vertical line.
EOF
sed -i -r 's/%/\\textpercent /g;s/[+]/\\textplus /g;s/[|]/\\textbar /g' testfile.txt
cat testfile.txt
Output:
1\textplus 2\textplus 3=6
12 is 50\textpercent of 24
The pipe character '\textbar ' looks like a vertical line.
This was already suggested in a similar way by #tripleee, and I see no reason why it should not work. As you can see, my platform uses the very same version of GNU sed as yours. The only difference to #tripleee's version is that I use the extended regex mode, so I have to either escape the pipe and the plus or put it into a character class with [].
nawk '{sub(/%/,"\\textpercent");sub(/\+/,"\\textplus");sub(/\|/,"\\textpipe"); print}' file
Tested below:
> echo "% + |" | nawk '{sub(/%/,"\\textpercent");sub(/\+/,"\\textplus");sub(/\|/,"\\textpipe"); print}'
\textpercent \textplus \textpipe
Use single quotes:
$ cat in.txt
foo % bar
foo + bar
foo | bar
$ sed -e 's/%/\\textpercent /g' -e 's/\+/\\textplus /g' -e 's/|/\\textbar /g' < in.txt
foo \textpercent bar
foo \textplus bar
foo \textbar bar
Related
This is mostly by curiosity, I am trying to have the same behavior as:
echo -e "test1:test2:test3"| sed 's/:/\n/g' | grep 1
in a single sed command.
I already tried
echo -e "test1:test2:test3"| sed -e "s/:/\n/g" -n "/1/p"
But I get the following error:
sed: can't read /1/p: No such file or directory
Any idea on how to fix this and combine different types of commands into a single sed call?
Of course this is overly simplified compared to the real usecase, and I know I can get around by using multiple calls, again this is just out of curiosity.
EDIT: I am mostly interested in the sed tool, I already know how to do it using other tools, or even combinations of those.
EDIT2: Here is a more realistic script, closer to what I am trying to achieve:
arch=linux64
base=https://chromedriver.storage.googleapis.com
split="<Contents>"
curl $base \
| sed -e 's/<Contents>/<Contents>\n/g' \
| grep $arch \
| sed -e 's/^<Key>\(.*\)\/chromedriver.*/\1/' \
| sort -V > out
What I would like to simplify is the curl line, turning it into something like:
curl $base \
| sed 's/<Contents>/<Contents>\n/g' -n '/1/p' -e 's/^<Key>\(.*\)\/chromedriver.*/\1/' \
| sort -V > out
Here are some alternatives, awk and sed based:
sed -E "s/(.*:)?([^:]*1[^:]*).*/\2/" <<< "test1:test2:test3"
awk -v RS=":" '/1/' <<< "test1:test2:test3"
# or also
awk 'BEGIN{RS=":"} /1/' <<< "test1:test2:test3"
Or, using your logic, you would need to pipe a second sed command:
sed "s/:/\n/g" <<< "test1:test2:test3" | sed -n "/1/p"
See this online demo. The awk solution looks cleanest.
Details
In sed solution, (.*:)?([^:]*1[^:]*).* pattern matches an optional sequence of any 0+ chars and a :, then captures into Group 2 any 0 or more chars other than :, 1, again 0 or more chars other than :, and then just matches the rest of the line. The replacement just keeps Group 2 contents.
In awk solution, the record separator is set to : and then /1/ regex is used to only return the record having 1 in it.
This might work for you (GNU sed):
sed 's/:/\n/;/^[^\n]*1/P;D' file
Replace each : and if the first line in the pattern space contains 1 print it.
Repeat.
An alternative:
sed -Ez 's/:/\n/g;s/^[^1]*$//mg;s/\n+/\n/;s/^\n//' file
This slurps the whole file into memory and replaces all colons by newlines. All lines that do not contain 1 are removed and surplus newlines deleted.
An alternative to the really ugly sed is: grep -o '\w*2\w*'
$ printf "test1:test2:test3\nbob3:bob2:fred2\n" | grep -o '\w*2\w*'
test2
bob2
fred2
grep -o: only matching
Or: grep -o '[^:]*2[^:]*'
echo -e "test1:test2:test3" | sed -En 's/:/\n/g;/^[^\n]*2[^\n]*(\n|$)/P;//!D'
sed -n doesn't print unless told to
sed -E allows using parens to match (\n|$) which is newline or the end of the pattern space
P prints the pattern buffer up to the first newline.
D trims the pattern buffer up to the first newline
[^\n] is a character class that matches anything except a newline
// is sed shorthand for repeating a match
//! is then matching everything that didn't match previously
So, after you split into newlines, you want to make sure the 2 character is between the start of the pattern buffer ^ and the first newline.
And, if there is not the character you are looking for, you want to D delete up to the first newline.
At that point, it works for one line of input, with one string containing the character you're looking for.
To expand to several matches within a line, you have to ta, conditionally branch back to label :a:
$ printf "test1:test2:test3\nbob3:bob2:fred2\n" | \
sed -En ':a s/:/\n/g;/^[^\n]*2[^\n]*(\n|$)/P;D;ta'
test2
bob2
fred2
This is simply NOT a job for sed. With GNU awk for multi-char RS:
$ echo "test1:test2:test3:test4:test5:test6"| awk -v RS='[:\n]' '/1/'
test1
$ echo "test1:test2:test3:test4:test5:test6"| awk -v RS='[:\n]' 'NR%2'
test1
test3
test5
$ echo "test1:test2:test3:test4:test5:test6"| awk -v RS='[:\n]' '!(NR%2)'
test2
test4
test6
$ echo "foo1:bar1:foo2:bar2:foo3:bar3" | awk -v RS='[:\n]' '/foo/ || /2/'
foo1
foo2
bar2
foo3
With any awk you'd just have to strip the \n from the final record before operating on it:
$ echo "test1:test2:test3:test4:test5:test6"| awk -v RS=':' '{sub(/\n$/,"")} /1/'
test1
With sed, I can replace the first match in a line using
sed 's/pattern/replacement/'
And all matches using
sed 's/pattern/replacement/g'
How do I replace only the last match, regardless of how many matches there are before it?
Copy pasting from something I've posted elsewhere:
$ # replacing last occurrence
$ # can also use sed -E 's/:([^:]*)$/-\1/'
$ echo 'foo:123:bar:baz' | sed -E 's/(.*):/\1-/'
foo:123:bar-baz
$ echo '456:foo:123:bar:789:baz' | sed -E 's/(.*):/\1-/'
456:foo:123:bar:789-baz
$ echo 'foo and bar and baz land good' | sed -E 's/(.*)and/\1XYZ/'
foo and bar and baz lXYZ good
$ # use word boundaries as necessary - GNU sed
$ echo 'foo and bar and baz land good' | sed -E 's/(.*)\band\b/\1XYZ/'
foo and bar XYZ baz land good
$ # replacing last but one
$ echo 'foo:123:bar:baz' | sed -E 's/(.*):(.*:)/\1-\2/'
foo:123-bar:baz
$ echo '456:foo:123:bar:789:baz' | sed -E 's/(.*):(.*:)/\1-\2/'
456:foo:123:bar-789:baz
$ # replacing last but two
$ echo '456:foo:123:bar:789:baz' | sed -E 's/(.*):((.*:){2})/\1-\2/'
456:foo:123-bar:789:baz
$ # replacing last but three
$ echo '456:foo:123:bar:789:baz' | sed -E 's/(.*):((.*:){3})/\1-\2/'
456:foo-123:bar:789:baz
Further Reading:
Buggy behavior if word boundaries is used inside a group with quanitifiers - for example: echo 'it line with it here sit too' | sed -E 's/with(.*\bit\b){2}/XYZ/' fails
Greedy vs. Reluctant vs. Possessive Quantifiers
Reference - What does this regex mean?
sed manual: Back-references and Subexpressions
This might work for you (GNU sed):
sed 's/\(.*\)pattern/\1replacement/' file
Use greed to swallow up the pattern space and then regexp engine will step back through the line and find the first match i.e. the last match.
A fun way to do this, is to use rev to reverse the characters of each line and write your sed replacement backwards.
rev input_file | sed 's/nrettap/tnemecalper/' | rev
thanks in advance for the help.
I have the following line that does work on linux.
myfile (extract)
active_instance_count=
aq_tm_processes=1
archive_lag_target=0
audit_file_dest=?/rdbms/audit
audit_sys_operations=FALSE
audit_trail=NONE
background_core_dump=partial
background_dump_dest=/home1/oracle/app/oracle/admin/iopecom/bdump
...
cat myfile |sed -r 's/ {1,}//g'|sed -r 's/\t*//g' |grep -v "^#"|sed -s "/^$/d" |sed =|sed 'N;s/\n/\t/'|sed -r "s/#.*//g" | sed "s/\t/;/g"|sed "s/\t/;/g"|sed -e "s,',\o042,g"
The result will be:
1;O7_DICTIONARY_ACCESSIBILITY=TRUE
2;active_instance_count=
3;aq_tm_processes=1
4;archive_lag_target=0
5;audit_file_dest=?/rdbms/audit
6;audit_sys_operations=FALSE
7;audit_trail=NONE
8;background_core_dump=partial
9;background_dump_dest=/home1/oracle/app/oracle/admin/iopecom/bdump
But, I can't figure out, how to perform the same command on AIX server.
Help is very welcome.
Regards.
Antonio.
Unless you have a compelling reason to use sed, you could use alternate tools:
awk -v OFS=';' '{print NR,$0}' filename
would produce the desired output.
You could also use perl:
perl -ne 'print "$.;$_"' filename
It appears that your sed expression would skip lines beginning with a #. As such, you could say:
perl -ne '$,=";"; !/^#/ && print ++$i,$_' filename
or something like:
grep -v '^#' filename | awk ...
reformatting your pipeline:
cat myfile |
sed -r 's/ {1,}//g' | # strip all spaces (1)
sed -r 's/\t*//g' | # strip all tabs (2)
grep -v "^#" | # delete all lines beginning `#` (3)
sed -s "/^$/d" | # delete all empty lines (4)
sed = | # interleave with line numbers (5)
sed 'N;s/\n/\t/' | # join line number and line with `\t` (6)
sed -r "s/#.*//g" | # strip all `#` comments (7)
sed "s/\t/;/g" | # replace all tabs with `;` (8)
sed "s/\t/;/g" | # do it again (9)
sed -e "s,',\o042,g" # replace all ' with " (10)
Boiling that down and using cat -n to provide the line numbers up front gets:
cat -n myfile |
sed "$(print 's/\t/;/')
$(print 's/[ \t]*//g')
s/#.*//g
/^$/d
s/'/\"/g"
which behaves identically unless I'm misreading the aix docs. The $(...) construction is command substitution, it runs that command and substitutes its output. print would be printf on linux.
I wanted to add a new line between </a> and <a><a>
</a><a><a>
</a>
<a><a>
I did this
sed 's#</a><a><a>#</a>\n<a><a>#g' filename but it didn't work.
Powered by mac in two Interpretation:
echo foo | sed 's/f/f\'$'\n/'
echo foo | gsed 's/f/f\n/g'
Some seds, notably Mac / BSD, don't interpret \n as a newline, you need to use an actual newline, preceded by a backslash:
$ echo foo | sed 's/f/f\n/'
fnoo
$ echo foo | sed 's/f/f\
> /'
f
oo
$
Or you can use:
echo foo | sed $'s/f/f\\\n/'
...or you just pound on it! worked for me on insert on mac / osx:
sed "2 i \\\n${TEXT}\n\n" -i ${FILE_PATH_NAME}
sed "2 i \\\nSomeText\n\n" -i textfile.txt
So let's see how can we do this: trim the text width within a certain value, say, 10.
For lines longer than 10, break it into multiple lines.
Example:
A text file:
01234567
01234567890123456789abcd
0123
should be changed to:
01234567
0123456789
0123456789
abcd
0123
So how can we do it using sed or awk as short as possible?
Use the proper tool for the job...
fold -w 10
Or, marginally shorter (than Jonathan Dursi's answer):
sed -e 's/.\{10\}/&\
/g' text.file
sed -e 's/.\{10,10\}/&\
/g' text.file
Tested on MacOS X 10.6.4, which does not use GNU sed.
$ sed -e 's/\(..........\)/\1\\n/g' foo.txt
or, if that doesn't work (eg, don't have a sufficiently new gnu sed), just insert a newline and make sure it's quoted:
$ sed -e 's/\(..........\)/\1\\
/g' foo.txt
You can pretty much transliterate that into awk, too:
$ awk '{ gsub(/........../, "&\n" ) ; print}' foo.txt
In awk with a variable width:
awk -v WIDTH=5 '{ gsub(".{"WIDTH"}", "&\n"); printf $0 }; !/\n$/ { print "" }'
The final statement prevents the printing of extra newlines when the line is an exact multiple of the maximum line width.