I'm using EJB 3.0 with JBoss AS 7.1.1 Final. I am getting this error when I try to connect my client to the server:
Aug 15, 2012 12:05:00 PM org.jboss.ejb.client.EJBClient <clinit>
INFO: JBoss EJB Client version 1.0.5.Final
Exception in thread "main" java.lang.IllegalStateException: No EJB receiver available for handling
[appName:GrahamsProjServer,modulename:GrahamsProjServer,distinctname:] combination for invocation context org.jboss.ejb.client.EJBClientInvoc
ationContext#6a340101
at org.jboss.ejb.client.EJBClientContext.requireEJBReceiver(EJBClientContext.java:584)
at org.jboss.ejb.client.ReceiverInterceptor.handleInvocation(ReceiverInterceptor.java:119)
at org.jboss.ejb.client.EJBClientInvocationContext.sendRequest(EJBClientInvocationContext.java:181)
at org.jboss.ejb.client.EJBInvocationHandler.doInvoke(EJBInvocationHandler.java:136)
at org.jboss.ejb.client.EJBInvocationHandler.doInvoke(EJBInvocationHandler.java:121)
at org.jboss.ejb.client.EJBInvocationHandler.invoke(EJBInvocationHandler.java:104)
at $Proxy0.test(Unknown Source)
at grahamsprojclient.main.Start.testItAll(Unknown Source)
at grahamsprojclient.main.Start.main(Unknown Source)
Here is my standalone.xml: http://pastebin.com/BuvQ6f2H
Here is my jboss-ejb-client.properties: http://pastebin.com/mKpqZuZJ
Here is the code for my client: http://pastebin.com/wcVBZvKn
My classpath does contain jboss-ejb-client.properties. I made sure by looking in the manifest.
When I start up the client, with the server already running, the server prints this every time:
12:05:00,330 INFO [org.jboss.as.naming] (Remoting "h890bp1" task-3) JBAS011806: Channel end notification received, closing channel Channel ID 2ea5a90b (inbound) of Remoting connection 11d4c3d5 to /127.0.0.1:51992
I have been working on this problem for several days and haven't found a solution. Any help would be greatly appreciated. If you need any other information from me than what I posted don't hesitate to ask and I'll post it immediately.
I found the solution! All I needed was to add this line to my client code: jndiProperties.put("jboss.naming.client.ejb.context", true);
I found it in a comment posted to this question: https://community.jboss.org/message/747360?_sscc=t
Related
Hello I am facing this exception when trying to lookup the jndi name in order to do a junit test in my JavaEE project using Wildfly9 server:
javax.naming.NameNotFoundException: phenomenon-ejb/ClientSessionBean!utilities.CllientSessionBeanRemote -- service jboss.naming.context.java.jboss.exported.phenomenon-ejb."ClientSessionBean!utilities.CllientSessionBeanRemote"
at org.jboss.as.naming.ServiceBasedNamingStore.lookup(ServiceBasedNamingStore.java:106)
at org.jboss.as.naming.NamingContext.lookup(NamingContext.java:207)
at org.jboss.as.naming.NamingContext.lookup(NamingContext.java:184)
at org.jboss.naming.remote.protocol.v1.Protocol$1.handleServerMessage(Protocol.java:127)
at org.jboss.naming.remote.protocol.v1.RemoteNamingServerV1$MessageReciever$1.run(RemoteNamingServerV1.java:73)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
This is the junit code I wrote:
public class JunitTester {
#org.junit.Test
public void Test() throws NamingException {
Context ctx = new InitialContext();
CllientSessionBeanRemote gest = (CllientSessionBeanRemote) ctx.lookup("/phenomenon-ejb/ClientSessionBean!"+ CllientSessionBeanRemote.class.getCanonicalName());
System.out.println(gest.Verify_No_Existence("Multiskan"));
}
}
Here is my jndi.properties file:
java.naming.factory.url.pkgs=org.jboss.ejb.client.naming
java.naming.factory.initial=org.jboss.naming.remote.client.InitialContextFactory
java.naming.provider.url=http-remoting://localhost:8080
jboss.naming.client.ejb.context=true
jboss.naming.client.connect.options.org.xnio.Options.SASL_POLICY_NOPLAINTEXT=false
And this is the output showed in the console when I deploy the application:
java:global/phenomenon-ear/phenomenon-ejb/ClientSessionBean!utilities.ClientSessionBean
java:app/phenomenon-ejb/ClientSessionBean!utilities.ClientSessionBean
java:module/ClientSessionBean!utilities.ClientSessionBean
java:global/phenomenon-ear/phenomenon-ejb/ClientSessionBean!utilities.CllientSessionBeanRemote
java:app/phenomenon-ejb/ClientSessionBean!utilities.CllientSessionBeanRemote
java:module/ClientSessionBean!utilities.CllientSessionBeanRemote
java:global/phenomenon-ear/phenomenon-ejb/ClientSessionBean!utilities.CllientSessionBeanLoacal
java:app/phenomenon-ejb/ClientSessionBean!utilities.CllientSessionBeanLoacal
java:module/ClientSessionBean!utilities.CllientSessionBeanLoacal
By the way the handshake is currectly done and my only problem is how to know the jndiname or why is the server not recognizing the one I wrote:
INFO: JBoss Remoting version 4.0.5.Beta1
juil. 22, 2020 2:08:34 PM org.jboss.ejb.client.remoting.VersionReceiver handleMessage
INFO: EJBCLIENT000017: Received server version 2 and marshalling strategies [river]
juil. 22, 2020 2:08:34 PM org.jboss.ejb.client.remoting.RemotingConnectionEJBReceiver associate
INFO: EJBCLIENT000013: Successful version handshake completed for receiver context EJBReceiverContext{clientContext=org.jboss.ejb.client.EJBClientContext#757942a1, receiver=Remoting connection EJB receiver [connection=Remoting connection <260479b4>,channel=jboss.ejb,nodename=desktop-k8fvkco]} on channel Channel ID a12ae3eb (outbound) of Remoting connection 651ca769 to localhost/127.0.0.1:8080
any advice could help, thanks.
The Wildfly Naming subsystem bind entries into the following global JNDI namespaces:
java:global
java:jboss
java:
However:
Only entries within the java:jboss/exported context are accessible
over remote JNDI.
Make sure your business objects are "properly exposed" with the #Remote annotation.
Check: Naming Subsystem ConfiguraAtion
I am trying to deploy a JSF portlet into a Liferay portal 6.2 running on top of a JBoss EAP 6.4, with OpenJDK 8. The portlet is deployed as a WAR file, but invokes some methods of an EJB through a remote interface. The EJB is deployed as an EAR file directly on JBoss.
On my developing machine it is working fine. But in a test machine it is not. There are exactly the same WAR and EAR files, the standalone.xml setup is almost the same for both machines, and also the JBoss modules are the same.
The stacktrace printed in the log is the following:
JBWEB000236: Servlet.service() for servlet Adminis Servlet threw exception: javax.portlet.faces.BridgeException: javax.faces.FacesException
at com.liferay.faces.bridge.BridgePhaseRenderImpl.execute(BridgePhaseRenderImpl.java:91) [liferay-faces-bridge-impl-3.2.4-ga5.jar:3.2.4-ga5 (Ephesus / Feb 15, 2014 AD)]
at com.liferay.faces.bridge.BridgeImpl.doFacesRequest(BridgeImpl.java:112) [liferay-faces-bridge-impl-3.2.4-ga5.jar:3.2.4-ga5 (Ephesus / Feb 15, 2014 AD)]
...
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_121]
Caused by: javax.faces.FacesException
at com.sun.faces.context.ExceptionHandlerImpl.handle(ExceptionHandlerImpl.java:139) [jsf-impl-2.1.28.redhat-8.jar:2.1.28.redhat-8]
at org.icefaces.impl.application.ExtendedExceptionHandler.handle(ExtendedExceptionHandler.java:113) [icefaces-3.3.0.jar:]
... 194 more
Caused by: java.util.NoSuchElementException
at java.util.HashMap$HashIterator.nextNode(HashMap.java:1439) [rt.jar:1.8.0_121]
at java.util.HashMap$KeyIterator.next(HashMap.java:1461) [rt.jar:1.8.0_121]
at org.jboss.ejb.client.EJBClientContext.getEJBReceiver(EJBClientContext.java:725) [jboss-ejb-client-1.0.30.Final-redhat-1.jar:1.0.30.Final-redhat-1]
at org.jboss.ejb.client.EJBInvocationHandler.invoke(EJBInvocationHandler.java:146) [jboss-ejb-client-1.0.30.Final-redhat-1.jar:1.0.30.Final-redhat-1]
...
at com.sun.proxy.$Proxy459.obtenerUsuarioPorCodigo(Unknown Source)
at com.sofis.adminis.delegates.PermisosDelegate.obtenerUsuarioPorCodigo(PermisosDelegate.java:450) [adminis-delegate-1.0.jar:]
at com.sofis.security.web.UsuariosSessionBeanWeb.autenticar(UsuariosSessionBeanWeb.java:1927) [classes:]
at com.sofis.security.web.listeners.SofisAutologinLiferayPhaseListener.afterPhase(SofisAutologinLiferayPhaseListener.java:54) [classes:]
at com.sun.faces.lifecycle.Phase.handleAfterPhase(Phase.java:189) [jsf-impl-2.1.28.redhat-8.jar:2.1.28.redhat-8]
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:107) [jsf-impl-2.1.28.redhat-8.jar:2.1.28.redhat-8]
... 198 more
I rised the log level to "org.jboss.ejb.client" and now I see two interesting messages just before the stactrace:
22:13:16,684 DEBUG [org.jboss.ejb.client.EJBClientContext] (ajp-/0.0.0.0:8009-5) org.jboss.as.ejb3.remote.LocalEJBReceiverPreferringDeploymentNodeSelector#4bc9113e deployment node selector selected node for appname=SS-ADMINIS-ear-1.0,modulename=SS-ADMINIS-MAVEN-EJB-1.0,distinctname=
22:13:16,687 DEBUG [org.jboss.ejb.client.EJBClientContext] (ajp-/0.0.0.0:8009-5) Selected node doesn't belong to eligible receivers. Continuing with a random eligible receiver
Note that there is no node name in both messages (two blanks before "node").
In my developing machine, where it works, the first message does include a node name, and the second message does not appear:
18:56:37,902 DEBUG [org.jboss.ejb.client.EJBClientContext] (http-/0.0.0.0:8080-2) org.jboss.as.ejb3.remote.LocalEJBReceiverPreferringDeploymentNodeSelector#6db73304 deployment node selector selected spio node for appname=SS-ADMINIS-ear-1.0,modulename=SS-ADMINIS-MAVEN-EJB-1.0,distinctname=
The only diference is that in my machine I am going directly with the browser to the server ([Browser] -- HTTP --> [JBoss]) while in the testing machine I go through a load balancer ([Browser] -- HTTP --> [Apache] -- AJP --> [JBoss]). That is reflected in the messages (ajp-/0.0.0.0 vs http-/0.0.0.0).
The exception is thrown when I try to invoke a method from the EJB through the remote interface. The reference to the local stub is gotten by means of a lookup, and the result is not null. There are no errors at deploy and the lookup does not throw an error neither.
What can be happening or what am I missing?
A friend of mine found the solution.
Something a did't say is that the testing machine was in fact a docker container. And it seems that there is a bug in JBoss with docker making the former to not read the hostname to pick a node name, so de node name when it starts is empty. So the message above a empty name node being selected is shown, and then the error.
The workaround is to specify a node name with the -Djboss.node.name parameter to JBoss. I put that setting in the standalone.conf, restarted the JBoss and it worked fine. Now, the first message shows the name I specified, and the second message does not appear, nor the exception.
Dears,
I'm trying to call ejb3 in jboss 5.0.1 from Wildfly 10 or EAP 7.
My code:
final Properties env = new Properties();
env.put(Context.INITIAL_CONTEXT_FACTORY, "org.jboss.naming.remote.client.InitialContextFactory");
env.put("java.naming.factory.url.pkgs", "org.jboss.ejb.client.naming");
env.put(Context.PROVIDER_URL, "remoting://localhost:1099");
env.put("org.jboss.ejb.client.scoped.context", "true");
InitialContext initialContext = new InitialContext(env);
TestBeanRemote remote = (TestBeanRemote) initialContext.lookup(
"ejb:TestEar/TestBean/TestBean!com.test.TestBeanRemote");
but it says:
Exception in thread "main" java.lang.IllegalStateException: EJBCLIENT000025: No EJB receiver available for handling [appName:BilllingFacadeCallbackEAR, moduleName:BilllingFacadeCallback, distinctName:] combination for invocation context org.jboss.ejb.client.EJBClientInvocationContext#3b088d51
at org.jboss.ejb.client.EJBClientContext.requireEJBReceiver(EJBClientContext.java:798)
at org.jboss.ejb.client.ReceiverInterceptor.handleInvocation(ReceiverInterceptor.java:128)
at org.jboss.ejb.client.EJBClientInvocationContext.sendRequest(EJBClientInvocationContext.java:186)
at org.jboss.ejb.client.EJBInvocationHandler.sendRequestWithPossibleRetries(EJBInvocationHandler.java:255)
at org.jboss.ejb.client.EJBInvocationHandler.doInvoke(EJBInvocationHandler.java:200)
at org.jboss.ejb.client.EJBInvocationHandler.doInvoke(EJBInvocationHandler.java:183)
at org.jboss.ejb.client.EJBInvocationHandler.invoke(EJBInvocationHandler.java:146)
at com.sun.proxy.$Proxy2.getActions(Unknown Source)
at TestStandalone.main(TestStandalone.java:28)
Is there any solution to call legacy jboss without old jars?
There is a legacy subsystem for this but I don't know its current status.
https://github.com/jboss-set/jboss-as-legacy
The CORBA standard defines an "across the wire" standard for making remote method calls called IIOP or "Internet Inter-ORB Protocol".
You need to set up to use CORBA IIOP in order to make platform independent remote EJB calls.
Therefore, you need to:
configure JBoss 5 so that it can handle incoming IIOP calls;
configure WildFly 10/EAP 7 to make outgoing EJB invocations using IIOP.
There is some information on this in the WildFly 10 EJB3 Reference Guide although I'm not sure how up to date that is.
The issue is normally caused by a transaction reaching it's timeout value.
So it may be that the application logic is correctly handling the scenario in this case and is not attempting to retry activity
It can have several issues :
connection: Connection broken
security : user/pass invalid
EJB missing: connected, but ejb is not there
SSL
Ports
IP Address
JBoss maintains a persistent connection to the other server, so when the client sees this message it means there is no connection to a server that has the ejb you are trying to call, so a message will be logged when the connection fails to the other server.
Caused by: java.lang.IllegalStateException: EJBCLIENT000025: No EJB receiver available for handling
Can you clarify the below:
1# is your EJBs deployed on jboss 5.0.1?
2# You are invoking the EJBS from Wildfly 10 or EAP 7, means your client is deployed in Wildfly 10 or EAP 7?
Circumstances: performed a by-the-book developer install using wls1212_dev.zip and wls1212_dev_supplemental.zip. Followed the README.txt and the README_SUPP.txt strictly. Created a sample domain by hand, no issues seen. Executed the run_samples.sh configuration script, no issues seen.
When starting the medrec domain (Avitek sample app) using startWebLogic.sh, the medrec database is not found (specific error below). The Avitek app comes up and display-only pages are navigable, but database touches all fail. The WLS console in the medrec domain works fine. The JDBC data source "MedRecGlobalDataSourceXA" exists in the domain and the fields look ... well, reasonable, to my untrained eye.
For now I am taking the error message at face value and assuming database creation failed within the setup script (run_samples.sh) But I examined all the logs in wlserver/samples after executing the run_samples.sh script, and there was nothing that seemed relevant.
Platform: VirtualBox VM with CentOS 6.5 and JDK1.7.0_45
Other notes: I am aware of the security fix in 1.7.0_51 and higher JDKs that breaks existing Derby database applications. I purposely chose to avoid this issue by installing the 0_45 JDK until I resolve this "database not found" issue.
Grateful for any help.
Error:
<May 25, 2014 8:40:46 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY.>
<May 25, 2014 8:40:46 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<May 25, 2014 8:40:47 AM PDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application "MedRecGlobalDataSourceXA" due to error weblogic.application.ModuleException: org.apache.derby.client.am.DisconnectException: The connection was refused because the database medrec was not found.
weblogic.application.ModuleException: org.apache.derby.client.am.DisconnectException: The connection was refused because the database medrec was not found.
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:172)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:167)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
Truncated. see log file for complete stacktrace
Caused By: org.apache.derby.client.am.DisconnectException: The connection was refused because the database medrec was not found.
at org.apache.derby.client.net.NetConnectionReply.parseRDBNFNRM(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.parseAccessRdbError(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.parseACCRDBreply(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.readAccessDatabase(Unknown Source)
at org.apache.derby.client.net.NetConnection.readSecurityCheckAndAccessRdb(Unknown Source)
Truncated. see log file for complete stacktrace
In linux unset variable LANG before starting Derby database server.
i'm trying to run my java EE web application on Glassfish v3.x on Netbeans 7 but it wont work, and gives me the following error: Glassfish 3.x start failed.
i don't know what's the problem glassfish used to work fine before but then suddenly stoped working i unistalled netbeans and glassfish n install it again, but still the same problem.
here is the glassfish log:
Launching GlassFish on Felix platform
INFO: Registered org.glassfish.ha.store.adapter.cache.ShoalBackingStoreProxy for persistence-type = replicated in BackingStoreFactoryRegistry
INFO: Grizzly Framework 1.9.31 started in: 585ms - bound to [0.0.0.0:3700]
INFO: Grizzly Framework 1.9.31 started in: 580ms - bound to [0.0.0.0:8181]
INFO: Grizzly Framework 1.9.31 started in: 738ms - bound to [0.0.0.0:8080]
INFO: Grizzly Framework 1.9.31 started in: 584ms - bound to [0.0.0.0:7676]
INFO: Grizzly Framework 1.9.31 started in: 539ms - bound to [0.0.0.0:4848]
GRAVE: Exception while visiting com/ibm/icu/impl/data/LocaleElements_zh__PINYIN.class of size 84805
java.lang.ArrayIndexOutOfBoundsException: 48188
at org.objectweb.asm.ClassReader.readClass(Unknown Source)
at org.objectweb.asm.ClassReader.accept(Unknown Source)
at org.objectweb.asm.ClassReader.accept(Unknown Source)
at org.glassfish.hk2.classmodel.reflect.Parser$5.on(Parser.java:362)
at com.sun.enterprise.v3.server.ReadableArchiveScannerAdapter.handleEntry(ReadableArchiveScannerAdapter.java:171)
at com.sun.enterprise.v3.server.ReadableArchiveScannerAdapter.onSelectedEntries(ReadableArchiveScannerAdapter.java:133)
at org.glassfish.hk2.classmodel.reflect.Parser.doJob(Parser.java:346)
at org.glassfish.hk2.classmodel.reflect.Parser.access$300(Parser.java:70)
at org.glassfish.hk2.classmodel.reflect.Parser$3.call(Parser.java:305)
at org.glassfish.hk2.classmodel.reflect.Parser$3.call(Parser.java:294)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
INFO: SEC1002: Security Manager is OFF.
INFO: SEC1010: Entering Security Startup Service
INFO: SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.
INFO: SEC1115: Realm [admin-realm] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created.
INFO: SEC1115: Realm [file] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created.
INFO: SEC1115: Realm [certificate] of classtype [com.sun.enterprise.security.auth.realm.certificate.CertificateRealm] successfully created.
INFO: SEC1011: Security Service(s) Started Successfully
INFO: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080]
INFO: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181]
INFO: WEB0169: Created HTTP listener [admin-listener] on host/port [0.0.0.0:4848]
INFO: WEB0171: Created virtual server [server]
INFO: WEB0171: Created virtual server [__asadmin]
INFO: WEB0172: Virtual server [server] loaded default web module []
INFO: Initialisation de Mojarra 2.1.0 (FCS 2.1.0-b11) pour le contexte '/mavenproject1'
INFO: Monitoring jndi:/server/mavenproject1/WEB-INF/faces-config.xml for modifications
INFO: PWC1412: WebModule[null] ServletContext.log():Initializing Spring root WebApplicationContext
Best Regards.
I know this was asked months ago but this question being one of the few sources i found in Google when encountering this problem, I think it'd good to share what bit i learnt:
I had the same exact problem and tried both things stated above. Still, my XML files didn't seem to be corrupted. In the end I found that the root of the problem was on the icu4j library which was, dont know why, among the dependencies in my project. Once I removed it, I was free of that error at last!
Should also be noted that Netbeans 7.0.1 (The IDE I'm using) also "uses" this library. I moved this library out of its original location just in case. NB continues to run without any problems so far.
Hope it helps someone else too!
I fixed mine in this way. It seemed that my XML file for the domain was corrupt ( I have no idea how) but what i did is as follows:
Remove your current server from the server node( right click and remove), then make a new server, except when it says to pick a domain, type in your own domain name (EX. myDomain) and then set up the server.
Wait for a few seconds, and bam, new XML file, not corrupt, and you should be able to run your server perfectly fine!
That's strange... How it does say "startup failed" if it loaded your app? Take a look at the last three lines of the log!
I had some problems like this, but all I needed is to right-click on the GF server node on "Services" tab and "refresh" it. Usually NB consider a slow GF startup as "failed".
Another answer which is possible now if using Java 8, but not at the time the OP asked, is that the server code contains lambdas. If you do have lambdas in your code, try to replace them with anonymous inner classes and your class(es) that were affected should now be good to go.