I'm trying to enable auto-complete-mode whenever a .go file is loaded through go-mode. It works if I invoke auto-complete-mode manually for Go source files, but when I tried adding it to .emacs as below, it doesn't work:
(add-hook 'go-mode-hook auto-complete-mode)
I've tried a few variations around it but none seem to work. Following is what the Go-Mode snippet currently looks like in my .emacs:
;; Load Go Mode
(require 'go-mode-load)
(add-hook 'go-mode-hook 'auto-complete-mode)
I tried creating my own hook function like this:
;; Load Go Mode
(require 'go-mode-load)
(defun auto-complete-for-go ()
(auto-complete-mode 1))
(add-hook 'go-mode-hook 'auto-complete-for-go)
I also tried including the hook in go-mode-load.el and go-mode.el, as well as calling auto-complete-mode like this:
(auto-complete-mode t)
(provide 'go-mode)
Doesn't work either way. I also added the go-mode-hook to auto-complete-default function like so:
(defun ac-config-default ()
(setq-default ac-sources '(ac-source-abbrev ac-source-dictionary ac-source-words-in-same-mode-buffers))
(add-hook 'go-mode-hook 'ac-common-setup)
;; Other hooks
(global-auto-complete-mode t))
That doesn't work either. What's the best way to trigger a command just after a major mode is enabled for a buffer?
Here is workaround for now:
(add-to-list 'ac-modes 'go-mode)
I fixed the problem in v1.4 branch with the following commits.
Add go-mode to ac-modes
Add go-mode dictionary
Which variations have you tried? It should work if you add a single-quote in front of auto-complete-mode:
(add-hook 'go-mode-hook 'auto-complete-mode)
Without this quote, auto-complete-mode is interpreted as a variable and the value of that variable is added to go-mode-hook. For this to make sense, such a variable should contain a function reference as its value. Most likely though there will be no variable named auto-complete-mode and Emacs will complain.
By adding a quote, you tell Emacs that this is not a variable, but the actual function you want the hook to call. See also here and here.
Related
I'm trying to configure Emacs to not activate Auto-Fill when editing an XML document.
In my .emacs file, I add a hook so that text mode will have Auto-Fill on by default:
(add-hook 'text-mode-hook 'turn-on-auto-fill)
I have added a directory to my load path:
(add-to-list 'load-path "~/.emacs.d/lisp/")
Inside that directory, I have written a file xml.el for this workstation, and I have tried each of the following in it, to no avail:
(add-hook 'xml-mode-hook 'turn-off-auto-fill)
(add-hook 'xml-mode-hook 'auto-fill-mode)
(remove-hook 'xml-mode-hook 'turn-on-auto-fill)
(remove-hook 'xml-mode-hook 'auto-fill-mode)
How can I disable Auto-Fill in XML mode?
EDIT: It appears this is caused by my text-mode-hook mentioned above. How can I override this hook in nxml-mode?
Ah, nxml-mode derives from text-mode. That's slightly surprising to me (although on closer inspection, it does appear to be standard for markup language modes in Emacs).
In that case you can either disable it again in nxml-mode-hook (as text-mode-hook has already run by that point):
(add-hook 'nxml-mode-hook 'turn-off-auto-fill)
(n.b. you said in the comments that this didn't work for you, but it certainly works for me).
or else just change your text-mode-hook code to something like the following, in order to catch this case before auto-fill is enabled:
(defun my-text-mode-hook ()
"Custom behaviours for `text-mode'."
;; Enable `auto-fill-mode', except in `nxml-mode' (which is derived
;; from `text-mode').
(unless (eq major-mode 'nxml-mode)
(turn-on-auto-fill)))
(add-hook 'text-mode-hook 'my-text-mode-hook)
following line removes all training white space while saving.
(add-hook 'write-file-hooks 'delete-trailing-whitespace)
but I want to hook this feature only when i'm in programming mode, so i did
(defun nuke_traling ()
(add-hook 'write-file-hooks 'delete-trailing-whitespace)
)
(add-hook 'prog-mode-hook 'nuke_traling)
which doesn't is not stopping which are not in programming mode.
Making the hook variable buffer-local has been mentioned. Don't do that. Or rather, don't do it using make-local-variable.
The normal hook mechanisms have buffer-local support built in -- that's the purpose of the LOCAL argument to add-hook. When the hook is run, it runs both the global and the buffer-local values.
So taking the example code in the question, you could change it to use:
(add-hook 'write-file-hooks 'delete-trailing-whitespace nil t)
And then delete-trailing-whitespace would be called whenever write-file-hooks was run, but only in the buffers in which prog-mode-hook had run.
However there are better ways to achieve this.
I agree with Drew that you are better to test whether your mode is derived from prog-mode, and with juanleon that before-save-hook is a better hook to use. So you might do something like:
(add-hook 'before-save-hook 'my-prog-nuke-trailing-whitespace)
(defun my-prog-nuke-trailing-whitespace ()
(when (derived-mode-p 'prog-mode)
(delete-trailing-whitespace)))
But what I actually recommend is using either ws-trim or ws-butler to take care of this in a smarter way.
Blindly removing all trailing whitespace from a file is a great way to wind up committing loads of unrelated lines to a version-control repository. Both of the libraries mentioned will ensure that your own commits are free of trailing whitespace, without also introducing unwanted modifications elsewhere in the file.
write-file-hooks is obsolete since Emacs-22, replaced by write-file-functions. But this hook is a bit delicate to use (because it can also be used to perform the write), so I recommend you use before-save-hook instead. And to make it apply only to the current buffer, just pass a non-nil value for the local argument of add-hook, as in:
(defun nuke_traling ()
(add-hook 'before-save-hook #'delete-trailing-whitespace nil t))
(add-hook 'prog-mode-hook #'nuke_traling)
Yes, because as soon as you enter a prog-mode mode, you add the function to write-file-hooks, where it remains. And that hook applies to writing any file, regardless of the mode of its buffer.
Instead of putting that simple function on the hook, you can add a function that tests the mode and only does the whitespace deletion when it is a mode where you want to do that.
Or else you would need to make write-file-hooks buffer-local (which I doubt you would want want to do --- the hook is used more generally).
Bad way:
(add-to-list 'write-file-functions 'delete-trailing-whitespace)
Better way is using ws-butler:
(straight-use-package 'ws-butler)
(add-hook 'prog-mode-hook #'ws-butler-mode)
ws-butler-mode remove spaces only on changed lines.
You would need to make the variable buffer local:
(defun nuke_traling ()
(make-variable-buffer-local 'write-file-hooks)
(add-hook 'write-file-hooks 'delete-trailing-whitespace))
But I would recommend using before-save-hook instead:
(defun nuke_traling ()
(add-to-list 'before-save-hook 'delete-trailing-whitespace))
write-file-hooks may be risky if used as a file-local variable, and documentation recomends using before-save-hook instead for thing like you want to do.
In emacs 21 or later you can add this hook to a perticular mode like this:
(add-hook 'prog-mode-hook
(lambda () (add-to-list 'write-file-functions 'delete-trailing-whitespace)))
I load auto-complete mode like this:
(let ((ac-path "path/to/auto-complete"))
(add-to-list 'load-path ac-path)
(require 'auto-complete-config)
(add-to-list 'ac-dictionary-directories (concat ac-path "ac-dict"))
(ac-config-default))
It works fine with C major mode, but doesn't turn on automatically when I open ObjC files. I can still turn it on manually and it will work fine along with the ObjC major mode.
Here's a snippet from the docs regarding ObjC major mode:
The hook `c-mode-common-hook' is run with no args
at mode initialization, then `objc-mode-hook'.
If I understand correctly, auto-complete adds a hook to the c-mode-common-hook, but objc-mode-hook somehow overrides it. Is there a way to fix this?
Thanks.
While looking through the source code of auto-complete.el, I've stumbled upon this definition
(defcustom ac-modes
'(emacs-lisp-mode
lisp-interaction-mode
c-mode cc-mode c++-mode
java-mode clojure-mode scala-mode
scheme-mode
ocaml-mode tuareg-mode
perl-mode cperl-mode python-mode ruby-mode
ecmascript-mode javascript-mode js-mode js2-mode php-mode css-mode
makefile-mode sh-mode fortran-mode f90-mode ada-mode
xml-mode sgml-mode)
"Major modes `auto-complete-mode' can run on."
:type '(repeat symbol)
:group 'auto-complete)
It turns out that auto-complete doesn't have a true global mode. It is enabled only with those major modes that are included in the ac-modes variable.
So, adding the following line to the .emacs file has solved the issue for me.
; add this line after the auto-complete mode has been loaded
(add-to-list 'ac-modes 'objc-mode)
Use the following:
(defun my-objc-mode-hook ()
(auto-complete-mode 1))
(add-hook 'objc-mode-hook 'my-objc-mode-hook)
Note 1: The function auto-complete-mode is a toggle function, when called with no arguments.
Note 2: It's possible to add an anonymous function using lambda, but this have several drawbacks. The most important ones are: modifying the function and reevaluating the expression will add the modified function in addition to the earlier version and C-h v xxx will print the full unformatted lambda function, which typically is hopeless to read and understand.
(add-hook 'objc-mode-hook 'auto-complete-mode)
That should do it if you're using auto-complete-mode. You can add more complex things to mode hooks by doing:
(add-hook 'objc-mode-hook '(lambda ()
(something-with arguments)))
Note that both arguments to add-hook are quoted, this is necessary and if you add unquoted functions they will probably not work.
I'm trying to use smart-operator.el in emacs. I've put the following into my init.el file:
(add-to-list 'load-path "~/.emacs.d/dotemacs_git/smart-operator/")
(require 'smart-operator)
(smart-operator-mode 1)
That doesn't seem to turn on smart-operator-mode automatically ... I still have to do
M-x smart-operator-mode
to get it working. What am I doing wrong? This setup here uses smart-operator-mode within a python-mode-hook; I don't see why making the function call conditional on python-mode would matter, though...
Thanks,
Mike
The link you provide shows folks using
(smart-operator-mode-on)
Also, they're adding that call in a hook, like so:
(add-hook 'python-mode-hook
(lambda ()
(smart-operator-mode-on)))
Which will turn it on for all buffers using python-mode. You'll need that since it appears that smart-operator-mode is not a global minor mode.
I'd like to disable line highlighting in term-mode. I tried this:
(add-hook 'term-mode-hook '(lambda () (global-hl-mode 0)))
but it complains about the symbol being void.
I have this further in my .emacs:
(global-hl-line-mode 1)
I agree with Ashutosh that that may be the source of your symbol error, but I'm not sure that that's the right approach anyways. I'm pretty sure that will disable highlighting everywhere, not just in terminal windows, when you load a terminal window.
I think the right thing is this:
(add-hook 'term-mode-hook '(lambda() (set (make-local-variable 'global-hl-line-mode) nil)))
...I'm going off hl-line.el where it says this:
;; You could make variable `global-hl-line-mode' buffer-local and set
;; it to nil to avoid highlighting specific buffers, when the global
;; mode is used.