I just started using the included Development Kit that came with the CRM SDK. I created a simple plugin using the Development Kit and now I cannot find a way to debug the plugin. Before i started to use the Development Kit i was able to debug the plugins i created.
I attached the debugger to the w3wp.exe process but the debugger doesnt break on the breakpoint at all.
Moreover my assembly is registered on Database and with Isolation set to None
Any help would be greatly appreciated. Thank you
There is another way to debug (instructions toward the end), by copying the PDB to the CRM /bin and attaching to the asynchronous (or sandbox) worker process. I'm not sure which way is easier...I will have to try Piyush's way sometime, but I do not use the RegistrationTool anymore thanks to the toolkit:
Debugging works well once you follow the setup instructions, though
copying the PDB file remains a manual step. Also note, the sandbox
process (Microsoft.Crm.Sandbox.WorkerProcess) is not started until
after a plug-in is run, so you will have to invoke it (or another one)
at least once before you will be able to debug.
Some time back I wrote an Article to debug plugins in CRM 2011, this might help you out.
Debug Plugins - CRM Parking Lot
I found out what the problem was. Turns out you have to re-deploy the plugin after setting the Assembly with Isolation set to None. Then like Chris Snyder said you still have to copy the PDB file from the debug folder to the bin/assembly folder on the CRM server. Seems like that step is still manual. Will see if I can either find a way to do it automatically or just create a simble batch file to do it.
Thank you all for your help.
Related
I am totally new to K2 and its very basic. I have installed the Incident Management accelerator. I am struggling hard to locate the workflow called “Incident Resolution” under the rules "when create button is clicked". I would like to modify this workflow to fit my purpose. Can anybody help to locate the workflow in K2 Studio? Any help on this is greatly appreciated.
Regards
George
First let me tell that it is not obvious, so new or not to K2, your question is legit :) It is very easy to do... once you know :)
If you already installed the accelerator, I suppose you already unzipped the package and used the K2 Package and Deploy to install it on your server.
Your first stop will be the K2 Workspace. For this, you must use Internet Explorer. The URL will usually be http://yourserver:81/Workspace
On your system, the port may differ dependending on your installation.
In the workspace, go to Management/Management console.
Expand your server then go to Workflow Server/Processes/Operations/Incident Resolution/Versions
By default, you should see a single version. Notice the download link next to the version. It allows you to download the process.
Download the process and save it somewhere. You will get a self-exctratible zip (.exe). Run that .exe and choose where the process should be extracted. It can be anywhere.
Browse to this location on your file system.
Double click the .k2proj project file. This will open the project containing the process using K2 Studio.
From here, you can now modify the process and deploy a new version on the server.
Please note, that at any time, if your new process ends up being 'not that good', you can go back to the versions screen in order to set another version of the process as the default one (the one that will be opened by the SmartForms). That gives you them time to fix your process and deploy a new version of the process that works better.
Let me know how it goes.
I'm trying out MassTransit. I wrote a small console application as showed in documentation (http://docs.masstransit-project.com/en/latest/configuration/quickstart.html).
What I first ran the app, it opened another console windows, and did something that looked like an installation proccess, or some kind of file copy. I remember seeing something done in the windows directory, but it was too fast to read and understand what exactly it did.
I couldn't find any information about it. I tried starting a new .NET project and running the same code - it did not repeat.
Does MassTransit install something on the system at first run? does someone knows what exactly happens on first tun?
Thanks
I've written a post explaining how to get a quick hello world Mass Transit application up and running.
It uses RabbitMQ, but the same principles apply to MSMQ.
http://nodogmablog.bryanhogan.net/2015/04/mass-transit-with-rabbitmq-hello-world/
If you included the call to the method VerifyMsmqConfiguration() as in the quick start, then MassTransit initates any required MSMQ component installation.
The required MSMQ components are Core, LocalStorage, and Multicast.
We use Eclipse (Indigo, with STS). Certain of our projects take inordinately long to build. Often the progress indicator sticks on, say, 87%, for 30 seconds.
I'm trying to find out what Eclipse is spending it's time on during the build cycle. I hope to be able to optimize the build or disable components that are causing it to be so slow. I'd like to see a log file saying ("compiling java code", "processing resources", etc).
I've poked around the log files in the .metadata directory. I've looked on the Eclipse site for tips. I've tried using "-debug" when starting Eclipse. I still can't find the information I'm looking for.
Is there any way to get Eclipse to spit out a log of what activities it is spending its time on when it builds a project?
What kind of projects are these? Java? Dynamic Web? Two things to look at for hints about what's going on are in the project Properties dialog; look at the Builders section and the Validation section. Try disabling the validations to see if that makes a difference in your build times.
To get some insight into what's happening at the times when the build seems to hang, try setting the -debug and -consoleLog options, as described here.
Disable your virus scanner software for your workspace and project directories. I increased the speed of my build in that way.
You can go to edit Windows->preference->general->workspace->build order to edit the default that exist according to your project need.
And check the maximum number of iteration when building with cycle.
I hope it works.
Since eclipse is a Java application, the usual debugging tools are at your disposal. In particular, you might try connecting to eclipse with JConsole and inspect the thread dump taken when the build "hangs", or run eclipse within a profiler.
You might find out things like a validator trying to download an xml schema, and waiting for the timeout since eclipse is not configured to use the corpoate proxy server - something which is very hard to find out by other means ;-)
Look into Apache Ant build scripts. Eclipse has support to auto generate them as a starting point instead of coding the whole thing by hand. The shop I worked in used tuned ANT scripts to optimize and control build order. We then piped output to log files using shell scripts.
You can try and replace with this aapt . My build for a particular project went from 3 minutes to 41 seconds....
This is an old post but thought of sharing my solution. I was using eclipse Luna and I noted that when you keep on working on a GIT branch without checking into git over the time the build becomes very slow. In my case I just deleted the folder .git and the file .gitignore and the build was very fast. Please note that this will disconnect eclipse from git, therefore use this aproach only if you know how to connect back to git branch using git commands.
I've got a Android AppEngine Connected Project I'm trying to build using GWT2.4 RequestFactory and Objectify on my Eclipse IDE.
Apparently I need to run the RequestFactory Validation Tool because I'm using ServiceName and ProxyForName annotations (these are required especially when working on the Android client side). My problem is the Eclipse can't validate it and the solution provided at http://code.google.com/p/google-web-toolkit/wiki/RequestFactoryInterfaceValidation#IDE_configuration is enough to make me rip my eyes out.
Since I'm working on a Windows machine, the shell script provided is not very useful. Trying to run Validation Tool from a cmd propt returns the error message:"This tool must be run with a JDK, not a JRE"
Can someone explain how this Tool is supposed to be run? Is there a way to use it as an External Tool in eclipse?
Normally if you follow carefully the instructions in the link you show, and run the GWT Development Mode from Eclipse, the Validation should be done automatically at the time you access the development URL with your browser.
For the record, I've actually had some problems with it, but launching the application several times maked it work.
Well, I ran into the same problem as well. When I tried annotation processing (under Java Compiler-> Annotation processing )was being disabled. So RequestFactoryDeobfuscatorBuilder was not being generated. Try enabling that and rebuilding your project.
I've just recovered from two days of hunting this bug down in a project that used to run validation properly but stopped.
In my case I had a new-ish generic BaseRequestContext and a specific sub-interface that extended it. My parent interface declared a method that didn't match the Locator's exactly (e.g. getThing(T) vs get(T)) and this wasn't reported as an error but did stop the validation tool from completing.
Apt is also removed in Java 8 : http://openjdk.java.net/jeps/117 . So beware.
Switching back to Java 7 will fix the issue if you are using Java 8.
I understood why the error happens sometimes in a project: the compiler was complaining it cannot find the directory .apt . But when I tried to create it manually it was not possible (under windows). I think the validation tool mutes the exception of not being able to create the directory: try renaming .apt in your validation tool calls (do a text search in your project)
I've got a nant build script (.86 beta) and it is telling me this:
BUILD FAILED
Failed to initialize the 'Microsoft
.Net Framework 2.0' target
framework.
The process cannot access the file
'C:\Users\cconway\AppData\Local\Temp\tmp25E3.tmp'
because it is being used by another
process.
This file does not even exist on my machine. Does anyone know the cause of this? Rebooting seems to allow me to run the script once successfully, but every time after that I get this message (though the name of the tmp file changes per reboot).
Thanks!
Are there any third-party tasks which might leave temp files open or keep running in the background, thus leaving file locked?
Maybe try sysinternals process monitor which will allow you to see the process which has the handle on this file.
Also, make sure that you have all the right versions of .Net installed and they are the correct ones (SDK vs Runtime). If you open the config file for nant you can see where it expects the .net version to be go check to make sure it's there and that you can see hte compiler methods (csc, vbc, etc). So it could have something that is trying to find it but it's not there or the pathing is off.
It is beta so there could even be a typo in the config file.
The answer is my anti-virus. I should have tried disabling that first! Once I disabled it, everything worked like a charm.
Hope this helps someone.