I want to achieve a configuration in which there are 3 primary mongodbs on 3 different servers and 1 mongodb running in the cloud. All the 3 primaries will have different collection names in which they write their data. What I want to achieve is that all the 3 primaries should sync their data to the one present in the cloud to their own collections. Is this possible? If yes, then can you point me to any resource for it? If no, then I think, I will have to have a seperate secondary in the cloud for each primary, right?
I did quite extensive searches and went through mongodb docs but couldn't find anything relevant.
One mongodb process can't belong to more than one replica set, so you'll have to have three processes for the secondaries, be it on the same cloud server or several.
How can I write data to multi mongodb instances and keep data synchronous among these instances? Just like in mariaDB.
Currently we use the replica-set in mongodb, but this seems can only support writing data to one node, and this may cause pressure issue if writing requests going up.
Sharded Cluster is not appropriate for me.
Thanks.
Please read the docs (Replication in MongoDB)
Of the data bearing nodes, one and only one member is deemed the primary node, while the other nodes are deemed secondary nodes
I'm new to Mongo, have been using Cassandra for a while. I didn't find any clear answers from Mongo's docs. My questions below are all closely related.
1) How to specify the replication factors in Mongo?
In C* you can define replication factors (how many replicas) for the entire database and/or for each table. Mongo's newer replica set concept is similar to C*'s idea. But, I don't see how I can define the replication factors for each table/collection in Mongo. Where to define that in Mongo?
2) Replica sets and replication factors?
It seems you can define multiple replica sets in a Mongo cluster for your databases. A replica set can have up to 7 voting members. Does a 5-member replica set means the data is replicated 5 times? Or replica sets are only for voting the primary?
3) Replica sets for what collections?
The replica set configuration doc didn't mention anything about databases or collections. Is there a way to specify what collections a replica set is intended for?
4) Replica sets definition?
If I wanted to create a 15-node Mongo cluster and keeping 3 copies of each record, how to partition the nodes into multiple replica sets?
Thanks.
Mongo replication works by replicating the entire instance. It is not done at the individual database or collection level. All replicas contain a copy of the data except for arbiters. Arbiters do not hold any data and only participate in elections of a new primary. They are usually deployed to create enough of a majority that if an instance goes down a new instance can be elected as the primary.
Its pretty well explained here https://docs.mongodb.com/manual/replication/
Replication is referred to the process of ensuring that the same data is available on more than one Mongo DB Server. This is sometimes required for the purpose of increasing data availability.
Because if your main MongoDB Server goes down for any reason, there will be no access to the data. But if you had the data replicated to another server at regular intervals, you will be able to access the data from another server even if the primary server fails.
Another purpose of replication is the possibility of load balancing. If there are many users connecting to the system, instead of having everyone connect to one system, users can be connected to multiple servers so that there is an equal distribution of the load.
In MongoDB, multiple MongDB Servers are grouped in sets called Replica sets. The Replica set will have a primary server which will accept all the write operation from clients. All other instances added to the set after this will be called the secondary instances which can be used primarily for all read operations.
When I put shard and Replica Set together, I am confused.
Why does the reference say that the shards are replica sets?
Do replica sets contains shards?
Can someone give me a conceptual explanation?
Replica Set is a cluster of MongoDB servers which implements Master - slave implementation. So, basically same data is shared between multiple replica i.e Master and Slave(s). Master is also termed as primary node and Slave(s) is/are considered as Secondary nodes.
It replicates your data on multiple mongo instances to solve/avoid fail overs. MongoDB also perform election of Primary node between secondary nodes automatically whenever Primary node goes down.
Sharding is used to store large data set between multiple machines. So basically, if you simply wants to compare Sharded nodes doesnt/may not contain same data where as Relicated nodes contains same data.
Sharding has different purpose,large data set is spread accross multiple machines.
Now, this large data set's subset can also be replicated to multiple nodes as primary and secondary to overcome failovers. So basically a shard can have multiple replica-set. These replica set of a shard contains subset of data for a large data set.
So, multiple shards can complete the whole large data set which are separated in the form of chunks. These chunks can be replicated within a Shard using Replica set.
You can also get more details related to this in MongoDB manual.
Sharding happens one level above replication.
When you use both sharding and replication, your cluster consists of many replica-sets and one replica-set consists of many mongod instances.
However, it is also possible to create a cluster of stand-alone mongod instances which are not replicated or have only some shards implemented as replica-sets and some shards implemented as stand-alone mongod instances.
Each shard is a replica set, not the shards are replica sets.
This is a language barrier, in English to say such a thing really means the same as "each shard is a replica set" in this context.
So to explain, say you have a collection of names a-z. Shard 1 holds a-b. This shard is also a replica set which means it has automated failover and replication of that range as well. So sharding in this sense is a top level term that comes above replica sets.
Shards are used to break a collection and store parts of it in different places. It is not necessary that a shard be a replica set, it can be a single server, but to achieve reliability and avoid loss of data, a replica set can be used as a shard instead of a single server. So, if one of the servers in the replica set goes down, the others will still hold the data.
Replication seems to be a lot simpler than sharding, unless I am missing the benefits of what sharding is actually trying to achieve. Don't they both provide horizontal scaling?
In the context of scaling MongoDB:
replication creates additional copies of the data and allows for automatic failover to another node. Replication may help with horizontal scaling of reads if you are OK to read data that potentially isn't the latest.
sharding allows for horizontal scaling of data writes by partitioning data across multiple servers using a shard key. It's important to choose a good shard key. For example, a poor choice of shard key could lead to "hot spots" of data only being written on a single shard.
A sharded environment does add more complexity because MongoDB now has to manage distributing data and requests between shards -- additional configuration and routing processes are added to manage those aspects.
Replication and sharding are typically combined to created a sharded cluster where each shard is supported by a replica set.
From a client application point of view you also have some control in relation to the replication/sharding interaction, in particular:
Read preferences
Write concerns
Consider you have a great music collection on your hard disk, you store the music in logical order based on year of release in different folders.
You are concerned that your collection will be lost if drive fails.
So you get a new disk and occasionally copy the entire collection keeping the same folder structure.
Sharding >> Keeping your music files in different folders
Replication >> Syncing your collection to other drives
Replication is a mostly traditional master/slave setup, data is synced to backup members and if the primary fails one of them can take its place. It is a reasonably simple tool. It's primarily meant for redundancy, although you can scale reads by adding replica set members. That's a little complicated, but works very well for some apps.
Sharding sits on top of replication, usually. "Shards" in MongoDB are just replica sets with something called a "router" in front of them. Your application will connect to the router, issue queries, and it will decide which replica set (shard) to forward things on to. It's significantly more complex than a single replica set because you have the router and config servers to deal with (these keep track of what data is stored where).
If you want to scale Mongo horizontally, you'd shard. 10gen likes to call the router/config server setup auto-sharding. It's possible to do a more ghetto form of sharding where you have the app decide which DB to write to as well.
Sharding
Sharding is a technique of splitting up a large collection amongst multiple servers. When we shard, we deploy multiple mongod servers. And in the front, mongos which is a router. The application talks to this router. This router then talks to various servers, the mongods. The application and the mongos are usually co-located on the same server. We can have multiple mongos services running on the same machine. It's also recommended to keep set of multiple mongods (together called replica set), instead of one single mongod on each server. A replica set keeps the data in sync across several different instances so that if one of them goes down, we won't lose any data. Logically, each replica set can be seen as a shard. It's transparent to the application, the way MongoDB chooses to shard is we choose a shard key.
Assume, for student collection we have stdt_id as the shard key or it could be a compound key. And the mongos server, it's a range based system. So based on the stdt_id that we send as the shard key, it'll send the request to the right mongod instance.
So, what do we need to really know as a developer?
insert must include a shard key, so if it's a multi-parted shard key, we must include the entire shard key
we've to understand what the shard key is on collection itself
for an update, remove, find - if mongos is not given a shard key - then it's going to have to broadcast the request to all the different shards that cover the collection.
for an update - if we don't specify the entire shard key, we have to make it a multi update so that it knows that it needs to broadcast it
Whenever you're thinking about sharding or replication, you need to think in the context of writers/update operations. If you don't need to scale writes then replications, as it fairly simpler, is a good choice for you.
On the other hand, if you workload mostly updates/writes then at some point you'll hit a write bottleneck. If write request comes Mongo blocks other writes request. Those write request blocks until the first request will be done. If you want to scale this writes and want parallelize it then you need to implement sharding.
Just to put this somewhere...
The most basic way to run mongo is as standalone server.
You write a config (file or cli options)
initiate the server using mongod
For this picture, I didn't include the "client". Check the next one.
A replica set is a set of servers initialized exactly as above with a different config file.
To link them, we connect to one of them, and initialize the replica set mode.
They will mirror each other (in the most common configuration). This system guarantees high availability of data.
The initialization of the replica set is represented in the red border box.
Sharding is not about replicating data, but about fragmenting data.
Each fragment of data is called chunk and goes to a different shard. shard = each replica set.
"main" server, running mongos instead of mongod. This is a router for queries from the client.
Obvious: The trade-off is a more complex architecture.
Novelty: configuration server (again, a different config file).
There is much more to add, but apart from the words the pictures hold much the same.
Even mongoDB recommends to study your case carefully before going sharding. Vertical scaling (vs) is probably a good idea at least once before horizontal scaling (hs).
vs is done upgrading hardware (cpu, ram, etc). hs is needs more computers (but could be cheap computers).
Both replication and sharding can be used (individually or together) for horizontal scaling of a MongoDB installation.
Sharding is MongoDB's solution for meeting the demands of data growth. Sharding stores data records across multiple servers to provide faster throughput on read and write queries, particularly for very large data sets.
Any of the servers in the sharded cluster can respond to a read or write operation, which greatly speeds up query responses.
Replication is MongoDB's solution for providing stability, backup, and disaster recovery to a MongoDB installation. This process copies and synchronizes the replica data set across multiple servers. This prevents downtime if one server goes offline.
Any of the secondary servers can respond to read queries, but only the primary server will perform write operations. The results of the write operation will then be propagated out to the secondary servers.
Scenario 1: Fault-Tolerance
In this scenario, the user is storing billing data in a MongoDB installation. This data is mission-critical to the user's business, and needs to be available 24/7, even if a server crashes or is taken offline.
MongoDB replication is the best solution for this user. With replication, the entire data set is mirrored on multiple servers. If a server fails or is taken offline, the other servers in the cluster take over.
Scenario 2: High Performance
In this scenario, the user is running a social networking site which is run from a MongoDB database. As the social network grows, the MongoDB data set has grown along with it. The user is seeing query times and page loads increase beyond an acceptable point. It is critical that the user's MongoDB installation receives a major performance boost.
Setting up a sharded MongoDB cluster is the best solution for this user. The sharded cluster will break up the user's data set and store parts of it on separate secondary servers. Each secondary server can respond to read or write queries on its portion of the data, which greatly increases the installation's response time
MongoDB Atlas is a Database as a service in could. It support three major cloud providers such as Azure , AWS and GCP. In cloud environment , we usually talk about high availability and scalability. In Atlas “clusters”, can be either a replica set or a sharded cluster.
These two address high availability and scalability features of our cloud environment.
In general Cluster is a group of servers used to achieve a specific task. So sharded clusters are used to store data in across multiple machines to meet the demand of data growth. As the size of the data increases, a single machine may not be sufficient to store the data nor provide an acceptable read and write throughput. Sharded clusters supports the horizontal scalability of the underling cloud environment.
A replica set in MongoDB is a group of mongod processes that maintain the same data set. Replica sets provide redundancy and high availability, and are the basis for all production deployments.In a replica, one node is a primary node that receives all write operations. All other instances, such as secondaries, apply operations from the primary so that they have the same data set. Replica set mainly focus on the availability of data.
Please check the documentation
Thank You.