I have a web application running on Wildfly 26 that uses SSE broadcasting and works correctly with http. However, when I switch to using an https endpoint, I get Wildfly log entries of:
WARN [org.jboss.resteasy.resteasy_jaxrs.i18n] (default task-1)
RESTEASY002186: Failed to set servlet request into asynchronous mode,
server sent events may not work
This happens with each registration attempt of the https endpoint but I never see this when registering with the http endpoint.
Testing with curl against the http endpoint results in curl waiting for events to show up (and keeps printing them out as it receives them) until I quit. Using curl to test the https endpoint, I will see the same headers I got from the http endpoint, namely:
HTTP/1.1 200 OK
Connection: keep-alive
Transfer-Encoding: chunked
Content-Type: text/event-stream
But after printing out my registration successful event, curl seems to believe the stream is closed and exits -- giving me my command prompt back.
My #GET MediaType.SERVER_SENT_EVENTS registration endpoint will create an OutboundSseEvent and send it to the SseEventSink to acknowledge successful registration to my SseBroadcaster instance (this is the event curl sees and prints before exiting). I then log a registration successful message before exiting the method. All of this appears to work correctly for both http and https but the stream doesn't stay open once the request endpoint completes because of the failure to run asynchronously as outlined above.
I have not found information on the causes and/or workaround solutions for my RESTEASY002186 problem. I posted a question on this issue last week using the Wildfly Google Group (https://groups.google.com/g/wildfly/c/SO2eHdvMEko) but thought I would try a wider audience since this doesn't seem to be a commonly experienced condition. I don't see any indications during initialization that WildFly will be unable to use asynchronous mode, it just complains when it tries and fails... Any help would be greatly appreciated!
Edit 6/6/2022
The code is running on an isolated network so I can't just cut/paste the code here, but I gutted the resources file to a bare minimum -- just leaving enough for the client to be able to register. The problem remains unchanged. The code is now essentially:
#Path("sse")
public class SseResources {
#GET
#Produces(MediaType.SERVER_SENT_EVENTS)
public void listen(#Context Sse sse, #Context SseEventSink sseEventSink) {
SseRegComplete regComplete = new SseRegComplete("sse-server");
OutboundSseEvent event = sse.newEventBuilder().
name(regComplete.getType().toString()).
id(regComplete.getEventId()).
mediaType(MediaType.APPLICATION_JSON_TYPE).
data(SseRegComplete.class, regComplete).
comment("Event Stream Registration Completed Successfully").
build();
sseEventSink.send(event);
}
}
Before the above simplified code, I had declared the resource as #ApplicationScoped, had Sse injected into it, and kept a reference to the SseBroadcaster so I could use it whenever an event would come in. I was catching the events to broadcast by using an #Observes method (which I also got rid of). I was calling register(sseEventSink) on the SseBroadcaster in the listen method so I could later call broadcast(outboundEvent) whenever I had updates to publish. I got rid of all that just to see if I could get the stream to stay open but to no avail. I still get the RESTEASY002186 message and curl still exits after printing out the regComplete event sent to it in the code above.
Edit 6/7/2022
Yesterday I was able to get my code working in a new vanilla Wildfly 26 install using an https endpoint URL by following these configuration instructions. Something I hadn't mentioned in the original post is that I am trying to add SSE functionality to an already existing app. It is several years old and we actually moved to Wildfly 26 about 6 months ago because of the log4j vulnerability in the earlier version of Wildfly we were using. I suspect that the problem is related to either our Wildfly configuration (perhaps because old settings were brought over that shouldn't have been) or some 3rd party dependency that is preventing Wildfly from using asynchronous mode.
We are using Shiro for authentication and authorization against an LDAP server -- perhaps Shiro has some hooks into the Wildfly runtime that are causing issues? After initial login, we use a session cookie in all subsequent calls. That is a difference from my test server but I don't think it is relevant because the call definitely passed authentication before executing the registration code. The only other thing that comes to mind right now is our web app ships with LogBack and tells Wildfly not to use the default logging framework.
I plan to start today by comparing the two standalone.xml files to see if anything jumps out at me as being fundamentally different. Is there anything else I should be checking for differences (I think there is a domain.xml file somewhere...)?
Edit 6/14/2022
This definitely has something to do with Shiro being in the loop. When I edit the web.xml file to have Shiro's filter-mapping url-pattern to not include the SSE endpoint, everything works as expected.
I just started using Postman. I had this error "Error: socket hang up" when I was executing a collection runner. I've read a few post regarding socket hang up and it mention about sending a request and there's no response from the server side and probably timeout. How do I extend the length of time of the request in Postman Collection Runner?
For me it was because my application was switched to https and my postman requests still had http in them. Changing postman to https fixed it.
Socket hang up, error is port related error. I am sharing my experience. When you use same port for connecting database, which port is already in use for other service, then "Socket Hang up" error comes out.
eg:- port 6455 is dedicated port for some other service or connection. You cannot use same port (6455) for making a database connection on same server.
Sometimes, this error rises when a client waits for a response for a very long time. This can be resolved using the 202 (Accepted) Http code. This basically means that you will tell the server to start the job you want it to do, and then, every some-time-period check if it has finished the job.
If you are the one who wrote the server, this is relatively easy to implement. If not, check the documentation of the server you're using.
Postman was giving "Could not get response" "Error: socket hang up".
I solved this problem by adding the Content-Length http header to my request
Are you using nodemon, or some other file-watcher? In my case, I was generating some local files, uploading them, then sending the URL back to my user. Unfortunately nodemon would see the "changes" to the project, and trigger a restart before a response was sent. I ignored the build directories from my file-watcher and solved this issue.
Here is the Nodemon readme on ignoring files: https://github.com/remy/nodemon#ignoring-files
I have just faced the same problem and I fixed it by close my VPN. So I guess that's a network agent problem. You can check if you have some network proxy is on.
this happaned when client wait for response for long time
try to sync your API requests from postman
then make login post and your are done
I defined Authenticate method to generate a token and mentioned its return type as nullable string as:
public string? Authenticate(string username, string password)
{
if(!users.Any(u => u.Key==username && u.Value == password))
{
return null;
}
var tokenHandler = new JwtSecurityTokenHandler();
var tokenKey = Encoding.ASCII.GetBytes(key);
var tokenDescriptor = new SecurityTokenDescriptor()
{
Subject = new ClaimsIdentity(new Claim[]
{
new Claim(ClaimTypes.Name, username)
}),
Expires = DateTime.UtcNow.AddHours(1),
SigningCredentials = new SigningCredentials(new
SymmetricSecurityKey(tokenKey),
SecurityAlgorithms.HmacSha256Signature)
};
var token = tokenHandler.CreateToken(tokenDescriptor);
return tokenHandler.WriteToken(token);
}
Changing nullable string to simply string fixed "Socket Hang Up" issue for me!
If Postman doesn't get response within a specified time it will throw the error "socket hang up".
I was doing something like below to achieve 60 minutes of delay between each scenario in a collection:
get https://postman-echo.com/delay/10
pre request script :-
setTimeout(function(){}, [50000]);
I reduced time duration to 30 seconds:
setTimeout(function(){}, [20000]);
After that I stopped getting this error.
I solved this problem with disconnection my vpn. you should check if there is vpn connected.
What helped for me was replacing 'localhost' in the url to http://127.0.0.1 or whatever other address your local machine has assigned localhost to.
Socket hang up error could be due to the wrong URL of the API you are trying to access in the postman. please check the URL once carefully.
It's possible there are 2 things, happening at the same time.
The url contains a port which is not commonly used AND
you are using a VPN or proxy that does not support that port.
I had this problem. My server port was 45860 and I was using pSiphon anti-filter VPN. In that condition my Postman reported "connection hang-up" only when server's reply was an error with status codes bigger than 0. (It was fine when some text was returning from server with no error code.)
When I changed my web service port to 8080 on my server, WOW, it worked! even though pSiphon VPN was connected.
Following on Abhay's answer: double check the scheme. A server that is secured may disconnect if you call an https endpoint with http.
This happened to me while debugging an ASP.NET Core API running on localhost using the local cert. Took me a while to figure out since it was inside a Postman environment and also it was a Monday.
In my case, adding in the header the "Content-length" parameter did the job.
My environment is
Mac:
[Terminal command: sw_vers]
ProductName: macOS
ProductVersion: 12.0.1. (Monterey)
BuildVersion: 21A559
mysql:
[Terminal command: mysql --version]
Ver 8.0.27 for macos11.6 on x86_64 (Homebrew)
Apache:
[Terminal command: httpd -v]
Server version: Apache/2.4.48 (Unix)
Server built: Oct 1 2021 20:08:18.
*Laravel
[Terminal command: php artisan --version]
Laravel Framework 8.76.2
Postman
Version 9.1.5 (9.1.5)
socket hang up error can also occur due to backend API handling logic.
For example - I was trying to create an Nginx config file and restart the service by using the incoming API request body. This resulted in temporary disconnection of the Nginx service while handling the API request and resulted in socket hang up.
If you have tried all the steps mentioned in other comments, and still face the issue. I suggest you check the API handler code thoroughly.
I handled the above-mentioned example by calling the Nginx reset method with delay and a separate API to check the status of the prev reset request.
For me it was giving Socket Hung Up error only while running Collection Runner not with single request.
Adding a small delay (100-300ms) in the collection Runner solved issue for me.
In my case, I had to provide --ssl-client-key and --ssl-client-cert files to overcome these errors.
Great error, it is so general that for everyone something different helps.
In my case I was not able to fix it and what is really funny is fact that I am expecting to get multipart file on one endpoint. When I prepare request in postman I get "Error: socket hang up". If I change for other endpoint(even not existing) is exactly that same error. But when I call any endpoint without body that request works and after that all subsequent attempts works perfectly.
In my case this is purely postman issue. Any request using curl is never giving that error.
For me the issue was related to the mismatch of the http versions on the client and server.
Client was assuming http v2 while server (spring boot/ tomcat) in the case was http v1
When on the server I configured server to v2, the issue got resolved in a go.
In spring boot you can configure the http v2 as below:-
server.http2.enabled=true
Note - Also the scenario was related to using client auth mechanism (i.e. MTLS)
Without client auth/ MTLS it worked without issues but for client auth the version setting in spring boot was the important rescue point
"socket hang up" is proxy related issue. when we run same collection with the help of newman on jenkins then all test are passed.
change the proxy setting
https://docs.cloudfoundry.org/cf-cli/http-proxy.html
I had the same issue: "Error: socket hang up" when sending a request to store a file and backend logs mentioned a timeout as you described. In my case I was using mongoDB and the real problem was my collection’s array capacity was full. When I cleared the documents in that collection the error was dismissed. Hope this will help someone who faces a similar scenario.
"Socket Hung Up" can be on-premise issue some time's, because, of bottle neck in %temp% folder, try to free up the "temp" folder and give a try
I fixed this issue by disabling Postman token header. Screenshot:
I face the same issue in when calling a SOAP API with POSTMAN
by adding the following data in the header my issue was fixed
Key:Content-Length
Value:<calculated when request is sent>
In my case, I was incorrectly using a port reserved for https version of my api.
For example, I was supposed to use https://localhost:6211, but I was using http://localhost:6211.
It is port related error. I was trying to hit the API with an invalid port.
if it helps to anybody... In my case, i just forgot to use json parser (const jsonParser = express.json();) to have access to json type of objects sending to the server from the client. Be careful, don't waste your time =)
This happened to me while I was learning ASP.NET Web API.
In my case it was because the SSL certificate verification.
I was using VS Code so I oversee about SSL certificate verification and it came with https protocol.
I solved this with testing my endpoints with http protocol.
Another approach can be just disabling the SSL certificate Verification on Postman Settings.
This error was coming for me since the request url is not correct --> here you can see my url does not contains : after http
The url I was using was : http//locahost:9090/someApi
Solution
adding a colon new url is http://localhost:9090/someApi
the socket error was not coming
This is just my case may be your case is totally different as mentioned in the other answers :)
This error is driving me nuts...
Situation:
I am trying to create a REST api and use a api-gateway proxy to access it. Proxy URL is HTTPS.
The deployment goes through fine. No errors reported in the logs. Worker assigned.
However when I try to access through browser get the "Uh-oh spaghettios! There's nothing here.".
Have tried all the usual things like making the https port dynamic using ${https.port} and using 0.0.0.0 instead of localhost in the http-listener config. But that does not help. Has this something to got to do with the proxy version ?
Any help or pointers will be great!
Make sure you follow Steps 2 from below link
Getting Started with Connectors
All,
Got the resolution. The problem was with the certificate chain. The keystore did not contain intermediate certificates. When added to the keystore the connectivity worked fine.
Only if Mulesoft provided correct errors or detailed logging, I would have saved lot of time over this.
Thanks for your inputs.
This problem seems to exist on a specific server. All other servers are working ok.
Background: The website is basically Forms Auth but there's an asmx that manually requires Basic Auth.
I have two C# client.
When invoking using SOAP (asmx client proxy) with basic auth credentials - all is well.
When invoking using WebClient or WebRequest with the same basic auth credentials, I get 401.5.
The folders have "Everyone" set to them.
When setting up iis trace, I see a very weird behavior. The request arrives with the correct Basic auth header. But further down the trace I see the following:
GENERAL_REQUEST_HEADERS
Headers="Connection: Keep-Alive
Content-Length: 68
Content-Type: application/json
Authorization: Kerberos
Expect: 100-continue
Host: 1.2.3.4
The Kerberos seems very weird. It is as if the request headers changed throughout the process, and perhaps that explains the 401.5.
Again, I would like to stress out that on other servers there's no problem with both clients. The only difference I can think of is that the problematic server is a DC. But if that is a problem then why is the SOAP client working well?
Any ideas?
Progress!
After some debugging I noticed that Application_AuthenticateRequest was fired twice for every request. The first time with Basic auth as I expected and the second time with the Kerberos!
After googling I found this:
http://forums.asp.net/t/1868629.aspx?HttpModule+triggered+two+times+for+request+to+URL+without+default+document
Seems like for extensionless urls those events might fire multiple times, depending on the configured Extensionless urls.
Going back to the trace I noticed that in the non-working server the trace shows usage of ExtensionlessUrl-ISAPI-4.0_64bit, and in the working servers no such entry existed. After comparing the two IIS I noticed that the non-working IIS had ExtensionlessUrl-ISAPI-4.0_64bit configured whereas in the working IIS there was ExtensionlessUrl**Handler**-ISAPI-4.0_64bit (note the "handler"). I compared the dlls involved and the working server had a newer aspnet_isapi.dll. I assume that this is an updated extensionless url handler. I suppose an upgrade to IIS or .NET might install a later version, but for now I tried to remove the ExtensionlessUrl-ISAPI-4.0_xxbit like so:
<remove name="ExtensionlessUrl-ISAPI-4.0_32bit" />
<remove name="ExtensionlessUrl-ISAPI-4.0_64bit" />
And it worked! Now there is only a single Application_AuthenticateRequest.
The non-working version that had this in the trace:
OldHandlerName="", NewHandlerName="ExtensionlessUrl-ISAPI-4.0_64bit", NewHandlerModules="IsapiModule", NewHandlerScriptProcessor="C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll", NewHandlerType=""
Now changed to:
OldHandlerName="", NewHandlerName="WebServiceHandlerFactory-ISAPI-4.0_64bit", NewHandlerModules="IsapiModule", NewHandlerScriptProcessor="C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll", NewHandlerType=""
Hopefully that's the end of it. Additional testing still required.
I would appreciate if someone can write how to upgrade IIS dlls to a later version. Is this an upgrade to .NET or is there a specific KB update that is downloaded with Windows Update?
I have been going through the google tutorial ( which I find very good ) at
https://developers.google.com/web-toolkit/doc/latest/tutorial/RPC
I have the service up and running on my local server and my JavaScript client can call it fine. OK so far. Now, what I want to do is deploy the service on a remote server JoeSoapHost:8080
How do I now tell my client where to send it's requests? I can't see any server/url being created in my RPC call. It just works by magic but now I want to get under the bonnet and start breaking it.
[Edit}
This is the Interface my client uses to know what service on the Server is to be called. I know that my Web.xml web descriptor must have a url that matches this. It has this because my server is invoked ok. Problem is, if I now decide to deploy my server elsewhere how do I tell my client what server/domain name to use?
#RemoteServiceRelativePath("stockPrices")
public interface StockPriceService extends RemoteService
{
StockPrice[] getPrices(String[] symbols);
}
What I want to achieve first is have a simple GWT client calling into an RPC service. I have this working but only when the server is localhost.
Next step, I deploy my app to the Google App Engine. What must I change now because my RPC service in my JavaScript is not being called when I deploy my app to
http://stockwatcherjf.appspot.com/StockWatcher.html
1) Brian Slesinsky excellent document on RPC - https://docs.google.com/document/d/1eG0YocsYYbNAtivkLtcaiEE5IOF5u4LUol8-LL0TIKU/edit#heading=h.amx1ddpv5q4m
2) #RemoteServiceRelativePath("stockPrices") allows GWT code to determine relative to your host/server/domain i.e http//mydomain.com/gwtapp/stockPrices
3) You can search GOOGle IO Sessions from 2009 - 2012 for some more in depth stuff on GWT RPC usage.
#RemoteServiceRelativePath gives the path of the servlet relative to the GWT.getModuleBaseURL() (which is more or less the URL of the *.nocache.js script); it doesn't "just work by magic".
If you deploy your services on a different server than the one serving your client code, then you'll likely hit the Same Origin Policy. CORS can help here, but you'll lose compatibility with IE (up to IE9 included). You'd better stick serving everything from the same origin.