IOS 6 force device orientation to landscape - iphone

I gave an app with say 10 view controllers. I use navigation controller to load/unload them.
All but one are in portrait mode. Suppose the 7th VC is in landscape. I need it to be presented in landscape when it gets loaded.
Please suggest a way to force the orientation go from portrait to landscape in IOS 6 (and it will be good to work in IOS 5 as well).
Here is how I was doing it BEFORE IOS 6:
- (void)viewWillAppear:(BOOL)animated {
[super viewWillAppear:animated];
UIViewController *c = [[[UIViewController alloc]init] autorelease];
[self presentModalViewController:c animated:NO];
[self dismissModalViewControllerAnimated:NO];
}
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation{
return (interfaceOrientation == UIInterfaceOrientationPortrait);
}
Presenting and dismissing a modal VC was forcing the app to review its orientation, so shouldAutorotateToInterfaceOrientation was getting called.
What I have have tried in IOS 6:
- (BOOL)shouldAutorotate{
return YES;
}
-(NSUInteger)supportedInterfaceOrientations{
return UIInterfaceOrientationMaskLandscape;
}
- (UIInterfaceOrientation)preferredInterfaceOrientationForPresentation{
return UIInterfaceOrientationLandscapeLeft;
}
On load, the controller keeps staying in portrait. After rotating the device, the orientation changes just ok. But I need to make the controller to rotate automatically to landscape on load, thus the user will have to rotate the device to see the data correctly.
Another problem: after rotating the device back to portrait, the orientation goes to portrait, although I have specified in supportedInterfaceOrientations only UIInterfaceOrientationMaskLandscape. Why it happens?
Also, NONE of above 3 methods are getting called.
Some (useful) data:
In my plist file I have specified 3 orientations - all but upside down.
The project was started in Xcode 4.3 IOS 5. All classes including xibs were created before Xcode 4.5 IOS 6, now I use the last version.
In plist file the status bar is set to visible.
In xib file (the one I want to be in landscape) the status bar is "None", the orientation is set to landscape.
Any help is appreciated. Thanks.

Ok, folks, I will post my solution.
What I have:
A view based application, with several view controllers. (It was navigation based, but I had to make it view based, due to orientation issues).
All view controllers are portrait, except one - landscapeLeft.
Tasks:
One of my view controllers must automatically rotate to landscape, no matter how the user holds the device. All other controllers must be portrait, and after leaving the landscape controller, the app must force rotate to portrait, no matter, again, how the user holds the device.
This must work as on IOS 6.x as on IOS 5.x
Go!
(Update Removed the macros suggested by #Ivan Vučica)
In all your PORTRAIT view controllers override autorotation methods like this:
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)toInterfaceOrientation{
return (toInterfaceOrientation == UIInterfaceOrientationPortrait);
}
-(BOOL)shouldAutorotate {
return YES;
}
- (NSUInteger)supportedInterfaceOrientations {
return UIInterfaceOrientationMaskPortrait;
}
You can see the 2 approaches: one for IOS 5 and another For IOS 6.
The same for your LANDSCAPE view controller, with some additions and changes:
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)toInterfaceOrientation{
[image_signature setImage:[self resizeImage:image_signature.image]];
return (toInterfaceOrientation == UIInterfaceOrientationLandscapeLeft);
}
-(BOOL)shouldAutorotate {
return YES;
}
- (NSUInteger)supportedInterfaceOrientations {
[image_signature setImage:[self resizeImage:image_signature.image]];
return UIInterfaceOrientationMaskLandscapeLeft;
}
ATTENTION: to force autorotation in IOS 5 you should add this:
- (void)viewDidLoad{
[super viewDidLoad];
if ([[[UIDevice currentDevice] systemVersion] floatValue] < 6.0)
[[UIApplication sharedApplication] setStatusBarOrientation:UIDeviceOrientationLandscapeLeft animated:NO];
}
Analogically, after you leave the LANDSCAPE controller, whatever controller you load, you should force again autorotation for IOS 5, but now you will use UIDeviceOrientationPortrait, as you go to a PORTRAIT controller:
- (void)viewDidLoad{
[super viewDidLoad];
if ([[[UIDevice currentDevice] systemVersion] floatValue] < 6.0)
[[UIApplication sharedApplication] setStatusBarOrientation:UIDeviceOrientationPortrait animated:NO];
}
Now the last thing (and it's a bit weird) - you have to change the way you switch from a controller to another, depending on the IOS:
Make an NSObject class "Schalter" ("Switch" from German).
In Schalter.h say:
#import <Foundation/Foundation.h>
#interface Schalter : NSObject
+ (void)loadController:(UIViewController*)VControllerToLoad andRelease:(UIViewController*)VControllerToRelease;
#end
In Schalter.m say:
#import "Schalter.h"
#import "AppDelegate.h"
#implementation Schalter
+ (void)loadController:(UIViewController*)VControllerToLoad andRelease:(UIViewController*)VControllerToRelease{
//adjust the frame of the new controller
CGRect statusBarFrame = [[UIApplication sharedApplication] statusBarFrame];
CGRect windowFrame = [[UIScreen mainScreen] bounds];
CGRect firstViewFrame = CGRectMake(statusBarFrame.origin.x, statusBarFrame.size.height, windowFrame.size.width, windowFrame.size.height - statusBarFrame.size.height);
VControllerToLoad.view.frame = firstViewFrame;
//check version and go
if (IOS_OLDER_THAN_6)
[((AppDelegate*)[UIApplication sharedApplication].delegate).window addSubview:VControllerToLoad.view];
else
[((AppDelegate*)[UIApplication sharedApplication].delegate).window setRootViewController:VControllerToLoad];
//kill the previous view controller
[VControllerToRelease.view removeFromSuperview];
}
#end
NOW, this is the way you use Schalter ( suppose you go from Warehouse controller to Products controller ) :
#import "Warehouse.h"
#import "Products.h"
#implementation Warehouse
Products *instance_to_products;
- (void)goToProducts{
instance_to_products = [[Products alloc] init];
[Schalter loadController:instance_to_products andRelease:self];
}
bla-bla-bla your methods
#end
Of course you must release instance_to_products object:
- (void)dealloc{
[instance_to_products release];
[super dealloc];
}
Well, this is it. Don't hesitate to downvote, I don't care. This is for the ones who are looking for solutions, not for reputation.
Cheers!
Sava Mazare.

This should work, it's similar to the pre-iOS 6 version, but with a UINavigationController:
UIViewController *portraitViewController = [[UIViewController alloc] init];
UINavigationController* nc = [[UINavigationController alloc] initWithRootViewController:portraitViewController];
[self.navigationController presentModalViewController:nc animated:NO];
[self.navigationController dismissModalViewControllerAnimated:NO];
I'm calling this before I'm pushing the next UIViewController. It will force the next pushed UIViewController to be displayed in Portrait mode even if the current UIViewController is in Landscape (should work for Portrait to Landscape too). Works on iOS 4+5+6 for me.

I think that best solution is to stick to official apple documentation. So according to that I use following methods and everything is working very well on iOS 5 and 6.
In my VC I override following methods:
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation
{
// Return YES for supported orientations
return UIInterfaceOrientationIsPortrait(interfaceOrientation);
}
Methods for iOS 6, first method returns supported orientation mask (as their name indicate)
-(NSUInteger)supportedInterfaceOrientations{
return UIInterfaceOrientationMaskPortrait;
}
second one thats tells your VC which is preferred interface orientation when VC is going to be displayed.
- (UIInterfaceOrientation)preferredInterfaceOrientationForPresentation
{
return UIInterfaceOrientationPortrait;
}
Just change Portrait for orientation that you want ;)
This solution is working smooth, I don't like the idea of creating macros and other stuff, that goes around this simple solution.
Hope this help...

I had the same problem, 27 views in my application from which 26 in portrait and only one in all orientations ( an image viewer :) ).
Adding the macro on every class and replace the navigation wasn't a solution I was comfortable with...
So, i wanted to keep the UINavigationController mechanics in my app and not replace this with other code.
What to do:
#1 In the application delegate in method didFinishLaunchingWithOptions
if ([[UIDevice currentDevice].systemVersion floatValue] < 6.0)
{
// how the view was configured before IOS6
[self.window addSubview: navigationController.view];
[self.window makeKeyAndVisible];
}
else
{
// this is the code that will start the interface to rotate once again
[self.window setRootViewController: self.navigationController];
}
#2
Because the navigationController will just responde with YES for autorotation we need to add some limitations:
Extend the UINavicationController -> YourNavigationController and link it in the Interface Builder.
#3 Override the "anoying new methods" from navigation controller.
Since this class is custom only for this application it can take responsibility
for it's controllers and respond in their place.
-(BOOL)shouldAutorotate {
if ([self.viewControllers firstObject] == YourObject)
{
return YES;
}
return NO;
}
- (NSUInteger)supportedInterfaceOrientations {
if ([self.viewControllers firstObject] == YourObject)
{
return UIINterfaceOrientationMaskLandscape;
}
return UIInterfaceOrientationMaskPortrait;
}
I hope this will help you,

From the iOS 6 Release Notes:
Now, iOS containers (such as UINavigationController) do not consult their children to determine whether they should autorotate.
Does your rootViewController pass the shouldAutoRotate message down the ViewController hierarchy to your VC?

I used the same method as OP pre-ios6 (present and dismiss a modal VC) to show a single view controller in landscape mode (all others in portrait). It broke in ios6 with the landscape VC showing in portrait.
To fix it, I just added the preferredInterfaceOrientationForPresentation method in the landscape VC. Seems to work fine for os 5 and os 6 now.
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation
{
return (interfaceOrientation == UIInterfaceOrientationLandscapeLeft);
}
- (BOOL)shouldAutorotate
{
return NO;
}
- (UIInterfaceOrientation)preferredInterfaceOrientationForPresentation
{
return UIInterfaceOrientationLandscapeLeft;
}

Hey guys after tryng a lot of different possible solutions with no success i came out with the following solution hope it helps!.
I prepared a recipe :).
Problem:
you need change orientation of viewcontrollers using navigationcontroller in ios 6.
Solution:
step 1. one initial UIviewcontroler to trigger modal segues to landscape and
portrait UInavigationControllers as picture shows....
more deeply in UIViewController1 we need 2 segues actions according to global variable at Appdelegate....
-(void)viewDidAppear:(BOOL)animated{
if([globalDelegate changeOrientation]==0){
[self performSegueWithIdentifier:#"p" sender:self];
}
else{
[self performSegueWithIdentifier:#"l" sender:self];
}
}
also we need a way back to portrait &| landscape....
- (IBAction)dimis:(id)sender {
[globalDelegate setChangeOrientation:0];
[self dismissViewControllerAnimated:NO completion:nil];
}
step 2. the first Pushed UiViewControllers at each NavigationController goes
with...
-(NSUInteger)supportedInterfaceOrientations{
return [self.navigationController supportedInterfaceOrientations];
}
-(BOOL)shouldAutorotate{
return YES;
}
step 3. We overwrite supportedInterfaceOrientations method at subclass of UInavigationController....
in your customNavigationController we have .....
-(NSUInteger)supportedInterfaceOrientations{
if([self.visibleViewController isKindOfClass:[ViewController2 class]]){
return UIInterfaceOrientationMaskPortrait;
}
else{
return UIInterfaceOrientationMaskLandscape;
}
}
step 4. At storyboard or by code, set wantsFullScreenLayout flag to yes, to both portrait and landscape uinavigationcontrollers.

Try segueing to a UINavigationController which uses a category or is subclassed to specify the desired orientation, then segue to the desired VC. Read more here.

As an alternative you can do the same using blocks:
UIViewController *viewController = [[UIViewController alloc] init];
viewController.modalTransitionStyle = UIModalTransitionStyleCoverVertical;
[self presentViewController:viewController animated:NO completion:^{
[self dismissViewControllerAnimated:NO completion:nil];
}];
Also, call it before pushing the new view.

Go to you Info.plist file and make the change

I had the same problem. If you want to force a particular view controller to appear in landscape, do it right before you push it into the navigation stack.
UIInterfaceOrientation currentOrientation = [[UIApplication sharedApplication] statusBarOrientation];
if (currentOrientation == UIInterfaceOrientationPortrait ||
currentOrientation == UIInterfaceOrientationPortraitUpsideDown)
[[UIDevice currentDevice] setOrientation:UIInterfaceOrientationLandscapeLeft];
UIViewController *vc = [[UIViewController alloc] init];
[self.navigationController pushViewController:vc animated:YES];
[vc release];

I solved it by subclassing UINavigationController and overriding the supportedInterfaceOrientations of the navigation Controller as follow:
- (NSUInteger)supportedInterfaceOrientations
{
return [[self topViewController] supportedInterfaceOrientations];
}
All the controllers implemented supportedInterfaceOrientations with their desired orientations.

I have used the following solution. In the one view controller that has a different orientation than all the others, I added an orientation check in the prepareForSegue method. If the destination view controller needs a different interface orientation than the current one displayed, then a message is sent that forces the interface to rotate during the seque.
#import <objc/message.h>
...
- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender
{
if(UIDeviceOrientationIsLandscape(self.interfaceOrientation))
{
UIInterfaceOrientation destinationOrientation;
if ([[segue destinationViewController] isKindOfClass:[UINavigationController class]])
{
UINavigationController *navController = (UINavigationController *)[segue destinationViewController];
destinationOrientation = [navController.topViewController preferredInterfaceOrientationForPresentation];
} else
{
destinationOrientation = [[segue destinationViewController] preferredInterfaceOrientationForPresentation];
}
if ( destinationOrientation == UIInterfaceOrientationPortrait )
{
if ([[UIDevice currentDevice] respondsToSelector:#selector(setOrientation:)])
{
objc_msgSend([UIDevice currentDevice], #selector(setOrientation:), UIInterfaceOrientationPortrait );
}
}
}
}

Related

Force landscape for one view controller ios

I've looked at several answers to questions similar but none of the answer worked. I have an app where I need everything portait except for one photo viewer I have. In the supported orientations section of the targets menu I only have portrait. How do I force my one view to be landscape. It is being pushed onto the stack from a nav controller but I'm using storyboards to control all that.
Since the answer seems to be hidden in the comments of the question and since ArunMak's answer is quite confusing, I'll just offer what I found out:
All I had to do was to add this function to my custom UIViewController subclass for the view:
- (NSUInteger)supportedInterfaceOrientations {
if ([[UIDevice currentDevice] userInterfaceIdiom] == UIUserInterfaceIdiomPad) {
// iPad: Allow all orientations
return UIInterfaceOrientationMaskAll;
} else {
// iPhone: Allow only landscape
return UIInterfaceOrientationMaskLandscape;
}
}
Note that the project needs to allow all orientations (that is: Portrait, Landscape Left, Landscape Right - but NEVER Upside Down on an iPhone!).
If you want to limit some or most views to Portrait, you need to implement the above method in every of those view controllers (or use a common super class for it and subclass all others from it) — if you limit the Device Orientation in the Info.plist to just Portrait, the app will never even think of going into landscape.
Yes this is possible, you can use this code:
-(NSUInteger)application:(UIApplication *)application supportedInterfaceOrientationsForWindow:(UIWindow *)window {
return UIInterfaceOrientationMaskLandscape;
}
-(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)orientation {
return orientation==UIInterfaceOrientationMaskLandscape;
}
OR
Try this method in your app delegate
- (NSUInteger)application:(UIApplication *)application supportedInterfaceOrientationsForWindow:(UIWindow *)window {
if (sglobalorientation isEqualToString:#"AllOrientation"]) {
return UIInterfaceOrientationMaskLandscape;
} else {
return UIInterfaceOrientationMaskAll;
}
}
you need to change the variable value sglobalorientation to that string value AllOrientation before you move to that Landscape view controller
and in your Landscape view controller, use this code in your view will appear
[[UIApplication sharedApplication] setStatusBarOrientation:UIInterfaceOrientationLandscapeLeft];
DigitalSignatureViewController *digisign = [[DigitalSignatureViewController alloc]init];
[self presentModalViewController:digisign animated:NO];
[self dismissModalViewControllerAnimated:NO];
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation
{
return NO;
}
and again when you move to next view controller change the sglobalorientation string value and follow the same step in your next view controller.
Lets try this code:
[UIApplication sharedApplication].statusBarOrientation = UIInterfaceOrientationLandscapeRight;
self.navigationController.view.center = CGPointMake(([UIScreen mainScreen].bounds.size.width/2), [UIScreen mainScreen].bounds.size.height/2);
CGFloat angle = 90 * M_PI / 180;
self.navigationController.view.transform = CGAffineTransformMakeRotation(angle);
self.navigationController.view.bounds = CGRectMake(0, 0,[UIScreen mainScreen].bounds.size.height , [UIScreen mainScreen].bounds.size.width);

Force portrait in one view controller makes other to be in portrait initially

The root view controller of navigation controller supports only portrait orientation and other controllers supports all orientation.Now if i am on the root view controller and the DEVICES is in landscape and if i push next view controller that opens in portrait that should open in landscape as it supports all orientation.
Please help me with this.
Using iPhone 4s iOS6.1.3
you can check Device orientation in your first screen after login viewcontroller using bellow code:-
-(void)viewWillAppear:(BOOL)animated
{
[self willRotateToOrientation:[[UIDevice currentDevice] orientation]];
[super viewWillAppear:YES];
}
- (void)willRotateToOrientation:(UIInterfaceOrientation)newOrientation {
if (UIDeviceOrientationIsLandscape([UIDevice currentDevice].orientation))
{
if (newOrientation == UIInterfaceOrientationLandscapeLeft || newOrientation == UIInterfaceOrientationLandscapeRight) {
//set your landscap View Frame
[self supportedInterfaceOrientations];
}
}
else if (UIDeviceOrientationIsPortrait([UIDevice currentDevice].orientation))
{
if(newOrientation == UIInterfaceOrientationPortrait || newOrientation == UIInterfaceOrientationPortraitUpsideDown){
//set your Potrait View Frame
[self supportedInterfaceOrientations];
}
}
// Handle rotation
}
sor when you load this viewcontroller it check first device oriantation and then load it's related frame
I think this is the issue related to the orientation changes in iOS6. You need to subclass the UINavigationController
Check this
1 . You have to create sub class of UINavigationController. add Following method.. Take one boolean variable to check whether it support for all orientation or not and change its value.
#implementation NavigationControllerViewController
- (BOOL)shouldAutorotate
{
return YES;
}
- (NSUInteger)supportedInterfaceOrientations
{
AppDelegate *appdelgate=[[UIApplication sharedApplication]delegate];
if (appdelgate.issuppoertAll) {
// for iPhone, you could also return UIInterfaceOrientationMaskAllButUpsideDown
return UIInterfaceOrientationMaskAll;
}
return UIInterfaceOrientationMaskPortrait;
}
#end
2 when you navigate form root view controller to other view controller
use this code , when you want to forcefully change its orientation.i.e lanscape to portrait
obj_viewcontroller = [[SecondViewController alloc] initWithNibName:#"SecondViewController" bundle:nil];
[self presentModalViewController:obj_viewcontroller animated:NO];
[self dismissModalViewControllerAnimated:NO];
[self.navigationController pushViewController:obj_viewcontroller animated:NO];
3 In second view controller you have to change boolean variable value
-(void)viewWillAppear:(BOOL)animated
{
appdelgate.issuppoertAll=YES;
}
4 Add this method into all view controller and set orientation as per your need.
- (NSInteger)supportedInterfaceOrientations
{
return UIInterfaceOrientationMaskPortrait;
}

I want to restrict some of the view controller to landscape in ios6

I'm trying to restrict one view controller which on top of UINavigationController. To do that i've created a UINavigationController subclass and implemented 2 methods
- (BOOL)shouldAutorotate {
return [[self.viewControllers lastObject] shouldAutorotate];}
- (NSUInteger)supportedInterfaceOrientations {
return [[self.viewControllers lastObject] supportedInterfaceOrientations];}
I want the first viewcontroller on top of UINavigationController(which is Root View Controller) should be in portrait mode and the next view controller which i'm pushing from the root view controller should be Landscape mode(ONLY).
So i'm overriding those two methods in both view controllers.
In the root view controller
- (BOOL)shouldAutorotate {
return NO;}
- (NSUInteger)supportedInterfaceOrientations {
return UIInterfaceOrientationMaskPortrait;}
In the next view controller
- (BOOL)shouldAutorotate {
return YES;}
- (NSUInteger)supportedInterfaceOrientations {
return UIInterfaceOrientationMaskLandscape;}
Its working fine but not completely. For the first time when I push the view controller its showing in portrait mode(Not restricting to landscape as I expected) and once I rotate the device/simulator and its working fine and restricting to landscape only.
Can anyone help in this?
Try this out.
Call this one in the viewWillAppear will explicitly tell the device to jump to the portrait orientation.
[[UIDevice currentDevice] performSelector:NSSelectorFromString(#"setOrientation:") withObject:(id)UIInterfaceOrientationPortrait];
I don't think this is the right solution. But if you got no other options, you can use this.
Happy Coding :)
U present new controller :
SecondViewController *objSecondViewController = [[SecondViewController alloc]initWithNibName:#"SecondViewController" bundle:nil];
[self.navigationController presentViewController:objSecondViewController animated:NO completion:^{}];
In new controller :
- (BOOL)shouldAutorotate {
return YES;
}
- (NSUInteger)supportedInterfaceOrientations {
return UIInterfaceOrientationMaskLandscape;
}
- (UIInterfaceOrientation)preferredInterfaceOrientationForPresentation
{
return UIInterfaceOrientationLandscapeLeft;
}
This worked for me. Just try using this :
1) YourApp-Info.plist
Add one more array for Supported interface orientations
Add your required orientation to this dictionary
Refer below screenshot :
2) Project Target
Select the required orientation from Supported Interface Orientations
Refer below screenshot :
UIViewController have the following function. You can implement this in your view controller where you want to restict portrait orientation.
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation {
// Return YES for supported orientations
if(interfaceOrientation == UIInterfaceOrientationPortrait)
return YES;
else
return NO;
}

IOS6 rotation issue

I know you have to use the new rotation methods for IOS6, but it seems the method I've written doesn't work.
I setted my plist file to allow all rotation but not portraitUpsideDown
I then had the following in my appDelegate:
self.navController = [[UINavigationController alloc] initWithRootViewController:self.viewController];
[self.window setRootViewController:navController]; //add nav controller to be the root view
Then in my rootView, to push to another controller, I have:
WebViewViewController *webController = [[JBWebViewViewController alloc] init];
webController.urlString = urlName;
[self.navigationController pushViewController:webController animated:YES];
And In the web controller I have:
#pragma mark - System Rotation Methods
//for any version before 6.0
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation
{
//only allow landscape
return (interfaceOrientation == UIInterfaceOrientationPortrait);
}
/for 6.0+
- (BOOL)shouldAutorotate{
return NO;
}
- (NSUInteger)supportedInterfaceOrientations{
return UIInterfaceOrientationMaskPortrait;
}
What I want do, is to allow 3 rotations in the root view, but when switch to the web view(note I do push navigation, not add subview), I only want to allow portrait view.
Someone help me please
-------UPDATE----------
I've created my own navController subclass of UINavigationController, I have an BOOL landscapeModeOn that I can setup to tell auto rotation specs
#pragma mark - System Rotation Methods
//for any version before 6.0
- (BOOL)shouldAutorotateToInterfaceOrientation (UIInterfaceOrientation)interfaceOrientation
{
if (landscapeModeOn) {
return interfaceOrientation != UIInterfaceOrientationPortraitUpsideDown;
} else {
return interfaceOrientation == UIInterfaceOrientationPortrait;
}
}
//for 6.0+
- (NSUInteger)supportedInterfaceOrientations{
if (landscapeModeOn) {
return UIInterfaceOrientationMaskAllButUpsideDown;
} else {
return UIInterfaceOrientationMaskPortrait;
}
}
- (BOOL)shouldAutorotate{
UIInterfaceOrientation ori = [UIDevice currentDevice].orientation;
if (landscapeModeOn) {
return ori != UIInterfaceOrientationPortraitUpsideDown;
} else {
return ori == UIInterfaceOrientationPortrait;
}
}
IN the subviews loading, I do:
- (void)viewWillAppear:(BOOL)animated{
//get nav controller and turn off landscape mode
JBNavController *navController = (JBNavController*)self.navigationController;
[navController setLandscapeModeOn:NO];
[navController shouldAutorotate];
}
--------------------Refer to best answer's quote
For IOS6, apple is now focusing on using the Storyboard's AutoLayout together with the new rotation definitions, it is difficult to fix some tiny bugs for IOS6 based on the ios 4.3 and ios 5 coding structure
From applefreak, his suggestion hinted on:
A main challenge in your case is not handling the orientations. Actually it's locking the different view controllers to particular orientation
Although manual rotate view seems really hard to do without any bugs, but it seems the only solution I am now trying, will post more once solved
For your situation you will have to subclass your NavigationController and add the shouldAutorotate and supportedInterfaceOrientations methods to it. iOS6 now asks your navigation stack in the reverse order to iOS5 so it will ask your NavigationController first and if that returns YES it won't even consult with it's child view controllers. To fix that you have to add the logic yourself to do this
So in your subclassed navigation controller you manually ask your current viewcontroller it's autorotation abilities:
- (BOOL)shouldAutorotate
{
return self.topViewController.shouldAutorotate;
}
- (NSUInteger)supportedInterfaceOrientations
{
return self.topViewController.supportedInterfaceOrientations;
}
and in your individual viewcontrollers you can now implement those functions and have them return the values you want which you have defined in your question.
I hope this makes sense.
Following code is wrong!
- (BOOL)shouldAutorotate{
return NO;
}
- (NSUInteger)supportedInterfaceOrientations{
return UIInterfaceOrientationMaskPortrait;
}
Remember that supportedInterfaceOrientations gets called only if shouldAutoRotate returns YES. Now root view controllers decides whether it's children rotates or not.
In your case I would suggest to have a base class controller to your self.viewController and set self.viewController to root view controller not navigationController otherwise rotation methods won't be invoked! I ran into this same issue. You should have a HAS-A relationship with base view controller and it's children. Return Yes/No from ShouldAutoRotate based on active children and same for supported orientation. If you follow this architecture then it would be consistent for complex App.
For example in your case BaseviewController should return YES from shouldAutoRotate and returns UIInterfaceOrientationPortrait from supported orientation delegate when webviewController is active. I hope this makes sense.
It common code for iOS5 and iOS6
- (void)willAnimateRotationToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation duration:(NSTimeInterval)duration
{
if (UIInterfaceOrientationIsLandscape(interfaceOrientation))
{
// here to implement landscope code
}
else
{
// here to implement setframePortrait
}
}

Storyboards orientation support for xCode 4.2?

I upgraded to xCode 4.2 and it's new Storyboards feature. However, could not find a way to support both portrait and landscape.
Of course, I did it programmatically, with 2 views, one for portrait and one for landscape, like in old days, and:
if (interfaceOrientation == UIInterfaceOrientationLandscapeLeft || interfaceOrientation == UIInterfaceOrientationLandscapeRight)
{
self.view = self.landscapeView;
}
else
{
self.view = self.portraitView;
}
But I was looking for a way to do this automatically somehow. I mean, it's xCode 4.2 now, I expected more from it. Thanks all.
==================================
TEMPORARY SOLUTION:
I will present here a temporary solution. I say it's temporary, because I am still waiting for Apple guys to do something really intelligent about this.
I created another .storyboard file, called "MainStoryboard_iPhone_Landscape", and implemented the landscape view controllers there. Actually, it's exactly like normal(portrait) .storyboard, but all screens are in landscape mode.
So I will extract the ViewController from landscape storyboard, and when rotation occurs, just change self.view with the new viewController's view.
1.Generate Notifications when orientation changes:
[[UIDevice currentDevice] beginGeneratingDeviceOrientationNotifications];
2.Look for notifications:
[[NSNotificationCenter defaultCenter] addObserverForName:UIDeviceOrientationDidChangeNotification object:nil queue:nil usingBlock:^(NSNotification *note) {
// We must add a delay here, otherwise we'll swap in the new view
// too quickly and we'll get an animation glitch
[self performSelector:#selector(updateLandscapeView) withObject:nil afterDelay:0];
}];
3.Implement updateLandscapeView
- (void)updateLandscapeView {
//> isShowingLandscapeView is declared in AppDelegate, so you won't need to declare it in each ViewController
UIDeviceOrientation deviceOrientation = [UIDevice currentDevice].orientation;
if (UIDeviceOrientationIsLandscape(deviceOrientation) && !appDelegate().isShowingLandscapeView)
{
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"MainStoryboard_iPhone_Landscape" bundle:[NSBundle mainBundle]];
MDBLogin *loginVC_landscape = [storyboard instantiateViewControllerWithIdentifier:#"MDBLogin"];
appDelegate().isShowingLandscapeView = YES;
[UIView transitionWithView:loginVC_landscape.view duration:0 options:UIViewAnimationOptionTransitionCrossDissolve|UIViewAnimationCurveEaseIn animations:^{
//> Setup self.view to be the landscape view
self.view = loginVC_landscape.view;
} completion:NULL];
}
else if (UIDeviceOrientationIsPortrait(deviceOrientation) && appDelegate().isShowingLandscapeView)
{
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"MainStoryboard_iPhone" bundle:[NSBundle mainBundle]];
MDBLogin *loginVC = [storyboard instantiateViewControllerWithIdentifier:#"MDBLogin"];
appDelegate().isShowingLandscapeView = NO;
[UIView transitionWithView:loginVC.view duration:0 options:UIViewAnimationOptionTransitionCrossDissolve|UIViewAnimationCurveEaseIn animations:^{
//> Setup self.view to be now the previous portrait view
self.view = loginVC.view;
} completion:NULL];
}}
Good luck to everybody.
P.S: I will accept Ad Taylor's answer, because, after much time waiting and searching for a solution, I finished up implementing something inspired from his answer. Thanks Taylor.
This is an old question but I read this earlier in the day and then had to spend a fair amount of time work out a better solution. I came up with this solution from hacking up the Apple Alternate View example. Basically it is serving up a modal view for the landscape view.
#pragma mark Rotation view control
- (void)orientationChanged:(NSNotification *)notification
{
// We must add a delay here, otherwise we'll swap in the new view
// too quickly and we'll get an animation glitch
[self performSelector:#selector(updateLandscapeView) withObject:nil afterDelay:0];
}
- (void)updateLandscapeView
{
UIDeviceOrientation deviceOrientation = [UIDevice currentDevice].orientation;
if (UIDeviceOrientationIsLandscape(deviceOrientation) && !self.isShowingLandscapeView)
{
[self performSegueWithIdentifier: #"toLandscape" sender: self];
self.isShowingLandscapeView = YES;
}
else if (deviceOrientation == UIDeviceOrientationPortrait && self.isShowingLandscapeView)
{
[self dismissModalViewControllerAnimated:YES];
self.isShowingLandscapeView = NO;
}
}
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation
{
// Return YES for supported orientations
return (interfaceOrientation == UIInterfaceOrientationPortrait);
}
You shouldn't generally be thinking of separate views for different orientations unless they are widely different (which, arguably, they shouldn't be). Instead, you should rely on autoresizing masks to lay out as much of your view's content based on basic restraints when the superview's frame changes. This will allow subviews to respond appropriately to a change in their superview's frame, often as a result of an interface orientation change.
To answer your question more directly, no, there is no way for Xcode to assume or be told which views you want to use for a particular interface orientation as this was never the intent of UIKit's view architecture.
Here is more information about autoresizing masks: Handling Layout Changes Automatically Using Autoresizing Rules.
In XCode v4.2.1 when using StoryBoards you can only change the orientation of the View Controller, and not the View itself, so if you have inserted another view there you wouldn't be able to change it's orientation, even if you could see the View properly.
So the previous way of having two Views would not appear to work when using StoryBoards (when using NIB's where the View Orientation is changeable for separate Views).