The title says it all. I have files that I want to nest during the installation of a NuGet package but can't use PowerShell scripts since they won't be run any longer (see here).
Are there any other ways to achieve this goal?
UPDATE: By nested I mean like *.resx and *.Designer.cs or *.xaml and code-behind files *.xaml.cs. I know I can achieve that by adding a <DependentUpon> element in the *.csproj file but I don't know how I can add that element without using PowerShell.
UPDATE2: init.ps1 runs the first time a package is installed in a solution. That won't cut it though. I would need the script to run when the package is installed into a project just like install.ps1 was run up to NuGet3.
UPDATE3: What I want to do is to add 3 files into the Properties folder of the target projects (Resources.resx, Resources.tt and Resources.Designer.cs). They are a replacement for the usual resources implementation. These files are installed by the nuget package when it is added to the project.
This is the part of the *.nuspec file that adds them to the Content folder of the package. As only one of them is actually content (the others being an Embedded Resource and Compile respectively) it would be nice to be able to set their build actions accordingly but one step at a time.
<files>
<file src="Properties\Resources.resx" target="content\Properties\Resources.resx" />
<file src="Properties\Resources.tt.pp" target="content\Properties\Resources.tt.pp" />
<file src="Properties\Resources.Designer.cs" target="content\Properties\Resources.Designer.cs" />
</files>
As these files are added to the projects I want the nesting inside the *.csproj file and not happen via a separate *.props file if that is somehow possible.
Packages can add MSBuild items like this to a project by using a .props file in the package. It would contain the same content that you would put into the .csproj file.
The down side of this is that the content cannot be modified by the user. If you need to modify the user's actual project file and copy content to the project folder you would have to include a .targets file in your package and set BeforeTargets="Build" on your target. This would give you a chance to run before build and make changes as needed.
The build folder works for both packages.config and PackageReference (NETCore SDK) projects. You can find more out about it here: https://learn.microsoft.com/en-us/nuget/create-packages/creating-a-package#including-msbuild-props-and-targets-in-a-package
We would like to use Octopus Deploy for our Deployments. I am trying to package our assemblies using Nuget for the same. We maintain lots of solutions (contains lots of independent projects) and We have our custom windows host which doesn't have any direct reference to the application assemblies. Currently We Zip all the files and extract them to install the windows services. I am exploring a way to package all the content in zip file to NuGet Package. is that possible. What is the best and easiest way to package considering our current implementation. I tried creating .NuSpec file and NuPkg manually using package explorer. But it's not visible and only visible in package explorer.
you can bundle all artifacts by defining metadata inside a nuspec files , nuget package created using that nuspec file will contain all artifacts defined in nuspec file, you can do the whole process from your command line as well , when creation of package is done from command line you can see your package in the same path where nuspec file resides and most important thing nuget package is also a type of zip file , so you can simply rename your example.nupkg to example.zip and verify the bundled contents.
I am using automatic package restore in NuGet v2.8.50506.491 with Visual Studio 2013.
I have added a build folder to my package with a {package ID}.props file. However, the file is apparently not being injected into the vcxproj at restore time. The package and all its content are being restored correctly but none of the definitions are visible in vcxproj properties. This may be expected if property injection occurs in memory, but the build fails due to paths that are clearly defined in the props not having been inherited.
If I add an explicit reference to the props file in my local packages repository, the project builds successfully, therefore there is no issue with the paths in props file.
I have also tried adding the props within a "native" subfolder under build, also to no avail.
An extract from the nuspec:
<file src="build\MyPackage.targets" target="build\MyPackage.targets" />
I have also tried a targets file instead of/as well as a props file, but this does not work either.
I should add that I have defined Nuget.config in the sln folder, with an absolute path to my packages repository:
<config>
<add key="repositoryPath" value="C:\Packages" />
</config>
I was having this problem today, and eventually I realized that the names of my .nuspec and .targets files were different than the id of my package, which is apparently a problem. Renaming the .nuspec and .targets files to match the package id made NuGet start injecting into the vcxproj correctly. I'm not sure which of the two files was the problem, or if it was both, but it's working correctly now that all three names match.
Injection of .targets and .props file references happens only at the time when you install the NuGet package. This is the same as with .NET projects where assembly references are created only at package install time.
Later when you build the project the package restore mechanism merely downloads and extracts the NuGet package so that the previously "dangling" .target / .props / assembly references become valid references.
I have created a T4 template that I want to reuse in several projects using NuGet. This template is based on a custom class so I need to distribute a DLL with the template. The DLL is used by the template during generation, but is not used by the project itself so I do NOT want it added to the target project as a reference.
My .nuspec file includes my DLL and places it in the root of the package which will prevent it from creating a reference and everything works fine if I build my package by hand. Unfortunately, I want to use the "nuget pack" command to automatically pick up the version number. When I run this command and reference the project file, it includes my DLL twice, once in the root (as I specified in my nuspec file) and an additional time in the lib folder (along with everything in the bin folder).
How can I automatically build my NuGet package without including any references. It seems there are several solutions, but I can't figure any of them out:
Let nuget include my DLL in the lib folder, but prevent it from creating the reference. I know I can use the <references> section to reference some DLLs and not others, but in this case I don't want it to reference any. If I leave the <references> section blank it is either ignored or I get an error depending on what level I leave blank.
Prevent nuget from including any DLLs automatically and only include the files in the <files> section of the nuspec file. Unfortunately, I can't figure out how to build the package from the project file without it including my DLL automatically.
Any thoughts?
If you right-click the DLL, you'll probably see that its "build action" is set to "content". Try setting it to "none".
Let's say I have a project with this structure:
MyLibrary\
MyLibrary.sln
MyLibrary.Core\
MyLibrary.Core.csproj
MyLibrary.Extensions\
MyLibrary.Extensions.csproj
MyLibrary.Tests\
MyLibrary.Tests.csproj
I want to create a single NuGet package which packages MyLibrary.Core.dll and MyLibrary.Extensions.dll. I can't seem to figure out how to get NuGet to do this. I've tried building a spec file manually and I've tried building one using "nuget spec MyLibrary.Core.csproj". I've tried adding all of the DLLs to a lib/ folder which I understand to be the convention-based mechanism for adding DLLs to the package. In every case I can get the MyLibary.Core.dll to get into the package but the MyLibrary.Extensions.dll does not end up packaged along with it.
TLDR: What is the best practice for creating a NuGet package with multiple projects / assemblies? Is there a tutorial out there that focuses on this? The tutorials I've found all focus on simple single-project demos.
You'll run NuGet on a single project (or nuspec file), but it supports pointers to other projects via the file element. This element uses the names of your project's References, so you avoid having to a) find the location of other project files, and b) copy files to a particular place as a post-build step.
Supposing you have a nuspec file for MyLibrary.Core.csproj, and it references MyLibrary.Extensions and MyLibrary.Tests such that they end up in the bin directory after a build:
<package xmlns="http://schemas.microsoft.com/packaging/2010/07/nuspec.xsd">
<metadata>
...
</metadata>
<files>
<file src="bin\Release\MyLibrary.Extensions.dll" target="lib\net40" />
<file src="bin\Release\MyLibrary.Tests.dll" target="lib\net40" />
</files>
</package>
With this setup, all of your references should end up in the appropriate place in the NuGet package. You still have the hard-coded 'Release' in there, but I'd wager most probably don't distribute NuGet packages of their debug builds anyway.
Did you generate a blank nuspec file with:
nuget spec
If you use that file and then put your dlls in a folder under it named lib, it will package them up.
I had a little trouble with trying to generate a nuspec file from a project or dll. Also, if you manually reference any files in the nuspec file, the conventions are not used. This is probably the problem with nuspecs generated from dlls or projects.
Also, if you are trying to run this from a build script that executes in a different folder, you can tell nuget the location of your .\lib folder via the -BasePath command line:
build\nuget.exe pack nuget\Company.Project.nuspec -BasePath nuget\
Have you tried NuGet Package Explorer? Might be the easiest way:
http://nuget.codeplex.com/releases/view/59864
It seems your problem is the same as this question: Why doesn't nuget include the referenced project when packing?. If so, you can use the -includereferencedprojects option (See http://docs.nuget.org/docs/reference/command-line-reference#Pack_Command).
I recently published a solution for this...
My solution enables automatic creation of NuGet packages when you build the solution where each package can contain multiple assemblies, references to both external NuGets and NuGets created during the same build and even include the source code for debugging.
In your case, all you will need to do is add a new class library project to your solution, reference the projects you want to package, then add a post build event.
You can find an article with a walk-through guide here
and the source code here.
i have some tutorial how i did it with windows and visual studio:
create local folder and call it packages like: c:/packages//lib - important to create another folder in folder call it lib and past there dll.
open nuget package explorer - https://npe.codeplex.com/downloads/get/clickOnce/NuGetPackageExplorer.application
the ui very intuitive just add dll and export it to /lib (for tutorial https://blog.zwezdin.com/2014/building-nuget-packages-with-gui-tool/ it in russian but see on pictures the flow it's about 3 clicks)
it will create nuspec file
open GIT BASH - https://git-for-windows.github.io/ and navigate to: cd c: => cd packages (the path of )
*maybe on windows you will need provide developer options for windows's linux stuff (https://www.howtogeek.com/249966/how-to-install-and-use-the-linux-bash-shell-on-windows-10/)
in GIT BASH enter command: nuget add -source [options]
where: : the full name of nuspec (include .nuspec)
and: the path of folder lib in folder (c:/packages//lib)
after the action ended successfully
in GIT BASH enter another command:
nuget pack .nuspec
not in this folder you have .nupkg file.
How to install a Nuget Package .nupkg file locally? - tutorial how to add it to visual studio.
I had the same problem and I decided to create Nuget which will allow to create other nugets from chosen project.
Package is deployed on the Nuget.org site. After referencing it in the project You need to add nuspeck file to the projects which should generate the projects.
Project with the required nuspeck file
Last thing which should be done by you is invoke command Create-Nuspec in Package Manager. Than the powershell module will take all libraries which are result of the build it will add also the required dependencies and create the nuget in the output directory.
Description about this package is placed here.
I had an issue when adding extra dlls references to a Nuget packages, and testing the package on a sample project, the extra dlls was not being added apparently, no matter the way that I create the Nuget Package.
Then I released that when you uninstall and install again a local Nuget Package with the same version number the changes no take effect, the extra dlls are not added.
So each time you uninstall the package, close visual studio and clear the Nuget Cache,
How to clear NuGet package cache using command line?
Then open again Visual Studio and reinstall the local package to make the change takes effect.
Or make the package version to increase each time to be for Visual Studio to recognize your changes.
For example:
Package-1.0.0
Package-1.0.1
Package-1.0.2
.....
To create a Nuget package from a sample project there are some ways, for example:
Right click to your Visual Studio project and choose the "Pack" option
Then install the nuget package explorer:
https://www.microsoft.com/es-ec/p/nuget-package-explorer/9wzdncrdmdm3?activetab=pivot:overviewtab
And add manually your extra references (dlls files) to your specific targets.
Create a nuget package using a .nuspec file how specified in the documentation:
https://learn.microsoft.com/en-us/nuget/guides/create-packages-for-xamarin
<files>
<file src="Plugin.LoggingLibrary\bin\Release\Plugin.LoggingLibrary.dll" target="lib\netstandard1.4\Plugin.LoggingLibrary.dll" />
<file src="Plugin.LoggingLibrary\bin\Release\Plugin.LoggingLibrary.xml" target="lib\netstandard1.4\Plugin.LoggingLibrary.xml" />
<file src="Plugin.LoggingLibrary.iOS\bin\Release\iOsDependence.dll" target="lib\Xamarin.iOS10\iOsDependence.dll" />
<file src="Plugin.LoggingLibrary.Android\bin\Release\AndroidDependence.dll" target="lib\MonoAndroid10\AndroidDependence.dll" />
</files>
In your files part add your .dll files.
And dont forget, each time you uninstall and install again the nuget package from your local source.
Or you increase the version of the package each time:
Or close Visual Studio, clean the nuget cache and Rebuild your project.
In order to take effect the changes.