I use Unity3D and I have a player with a rigidbody. I add force tto the body for moving the player. My player walks over a terrain but is able to walk up mountains that are to steep to climb. I want to limit the player so it cannot walk up a slope that is to steep.
I know there is a CharacterController component that has this functionality, but I have to use the rigidbody, so I want the same but on my rigidbody.
I can get the normal of the triangle I am standing on, and calculate its angle, but I cannot seem to make the player stop moving up the slope. Only make the player stop moving (which makes the player unmovable once it hits a angled slope)
Any ideas how to solve this problem?
It's difficult to answer without more details on how you're using the physics engine. How/Are you using friction? What angle are you applying the force? Is it always horizontal or at the angle of the floor? Does the player have a mass?
Anyway I can think of a few ways to solve this
Go the pure physics route. Using player mass, friction, force angle, gravity, etc. Get the physics to handle these situation for you. This may take a fair amount of time and programming.
Keep the rigid body but fake the forces. Scale the force you are applying to the body of the player with the angle of the triangle the player is on. You can either use trigonometry to work out what you should apply or your own mapping. By your own mapping I mean set an angle where 0 force is applied (say 45 degree) and do a linear(or non linear) scale on the force applied so on flat ground force is 1 and at 45 force is 0.
Don't use rigid bodies. There is a reason most games don't use rigid bodies to control characters. It's hard and complicated and most of the time not worth the time it would take. Of course I don't know the details of your project so if this isn't an option, fine.
Hope that gives you some things to think about.
Related
I have a simple game done using unreal engine 4,
The turret of the tank should turn toward the player pawn.
I made the blueprints code to build that, but the turret rotates quickly and incorrectly.
Video about problem
I tried to solve the problem many times without any results !!
Hope to help me.
There are probably a few ways you can do this, but you can simplify this quite a bit. I also suspect you can do all of it in the animation blueprint.
Simplify the first part (XDoMa.jpg) using the Find Look At Rotation node.
Break the output of this and create another rotator with the yaw from that node and the pitch and roll from the turret's world rotation (you're currently setting pitch and roll to zero in cDJ08.jpg, which you don't want to do in case the tank is on a slope).
To rotate the turret to point at the target, use the RInterp To node and connect its output rotator to a Set World Rotation node. The nice thing about the 'RInterp To' node is that you can set the speed. For a bit more realism you could use some simple maths to accelerate and decelerate the turret's rotation.
Another thing you'll want is a bool variable in the tank actor BP. Then you can use a branch in the animation BP to trigger the stuff above when you set the bool to true.
The key parts to this are the Find Look At Rotation and RInterp To nodes, and to do all of it in the animation BP.
I have a cube with Rigidbody attached to it would slide slightly whenever I pressed the play button. If I leave it for awhile, it would slide to other side of the screen.
Anyone know how to solve this problem without using the "freeze position"? I don't know what I messed up in my project...
This is what the object looks like:
Note: I need to use the gravity.
Thank you!
Heh! The solution here is:
You had a rigidbody on the floor :)
You don't do that :) Never.
If the "floor" surface is flat, then,
it will not slide.
You've got something strange going on, such as
"floor" is NOT flat
a feature like "Wind" turned on
perhaps other objects invisible in the scene you have forgotten about are nudging it
PhysX does not have a "mind of it's own". There is some simple reason it is moving.
Let's say the "floor" is indeed on an angle, so it SHOULD move, but you WANT it to NOT move.
What you obviously do:
Just as in the real world, put something there to stop it moving.
A small invisible wall will do the trick. That's PhysX!
Usually rigidbody sliding happens when a lower rigidbody has lower mass than a higher rigidbody (forcing down the lower rigidbody). Typical problem with player having say mass 80 jumping on a cube with mass 1. In this case the collision is so violent that the cube will probably fly out (not only slide).
The situation is very similar to the real world. Try to stay on a box of milk if you have 120 kg (ok, ok, 80 :) ).
When you try to eliminate this behavior, you need either increase the mass of the lower object or decrease the mass of the higher one or set the lower rigidbody to kinematic.
The solutions above is not proper way of solving the problem. Unity has more features of physics than mass. If you get sliding on movement or because of other objects you should add proper drag value on your rigidbody. For example , lets say you have blocks spawning over top of other blocks and this creates horizontal sliding. In my case I add drag of 1 to the objects which has mass of ~ 1 kg. It depends on the scene and you should try different values on your case. Do not use bigger values and angular drag if it is not important.
I am making a simulation of some fish in a lake.
I am using rigid body as otherwise they move through the sides. But when they hit into the sides they rotate and then the script I have to set their rotation to 0,0,0 when they leave fails.
Your problem may be occurred by the fact that you are using unity's physics to move the fish but trying to set rotation directly. In this case movement and rotation of the fish are driven by Physics and forces, applied to the object. But you still can affect rotation and position if you reset all forces. Try looking here to learn how to remove forces.
Also when dealing with Physics in Unity, don't mess Update() and FixedUpdate() methods, because it may lead to an incorrect result.
When you say "hit into the sides" do you mean the sides of the simulated lake?
If so, one option might be to set the objects that denote the sides as "kinematic." Then you can detect when a GameObject (such as a fish) collides with it but it won't cause any physics reaction.
(ref: RigidBody)
My main character moves by touching and holding him and then moving your finger left or right to move the character. To do this I just simply update the node's x position (walks left and right on a flat surface) in touchesMoved() with the x position of the touch location, and apply an animation depending on the direction he's moving.
I want to kind of take this to the next level and accomplish the same effect, but using physics, so that when I'm done moving him and release my finger, he may slide a little bit in the direction he was moving given the speed I was moving him at, if that makes sense. Does anyone know how I can accomplish this effect?
Would I have to do as I'm currently doing and update the position as it moves, but also apply a force/impulse at the same time? Kind of confused on how to approach this
Moving the physics body via force, impulse, or velocity will automatically update the player position.
So you will have to play around with the correct way to accomplish your goal. But based on this, what I would suggest is replace your .position code with .physicsBody!.velocity code in your touchesMoved. Then, on your touchesEnded, you can apply a bit of an impulse to give the player that little bit of an "on ice" effect to keep them going a tad.
You will need to experiment with how much velocity you want to get the character to move at the correct speed, and then you will need to play with the impulse figures as well to get it just right.
This could get a bit tricky though, in touchesMoved... because at some point you will want to reset the velocity to 0 (so they stop moving when your finger stops).
To do that, you will need to to use the .previousLocation from your touch object, and compare the distance of X moved. if the distance X moved is >0 (or some deadzone threshold) then apply the velocity; if the deltaX is 0, then set the velocity to 0.
This may actually be more complicated than just using .position to move the character, then having the character slide a bit with physics on touchesEnded.
You will have to play with it to get it right.
I have been working on a Unity ping pong game using the Leap Motion. I use rigidbody.MovePosition() to move the paddle. However, when I hit the ball (which uses gravity), the paddle launches it too far. Even when I change the masses of both, it doesn't do anything.
What variable should I change to reduce this energy going into the ball?
From the following link.
"MovePosition will put your object at the target location, no matter what. It may push aside other objects in a realistic way, or may blast them out of the way, or may just pass right through them. But it will gladly move you through a solid wall or a mountain.
If you're using MovePosition on a rigidbody to add from where you currently are, it looks like AddForce. With AddForce, the physics step does all the work: applies your velocity, sees the collision and handles the bounce. With MovePosition, the physics step sees you're mysteriously overlapping a solid object. If it isn't too much, it will bounce you apart."
You won't need to use MovePosition. Instead, you can figure out the direction of the shot (based on the position of the ball relative to the paddle). Then you can add an impulse force in that direction to the ball.
Pseudo-code (from the following link):
Vector3 shootDir = ballPosition - paddlePosition; // Calculate direction of the shot
shootDir.Normalize(); // Normalize the shot vector
ball.AddForce(shootDir * speed, ForceMode.Impulse); //Add impulse force in correct direction.
Credit due to Owen Reynolds and Tim Michels.