I want to increase the font size of the text if it's in the middle of the screen while scrolling in a table view.
You can use the scrollViewDidScroll delegate method and then change the text size if the contentOffset.y of the tableView is equal or greater than half of your screen height.
I have a screen with UINavigationController and UITabBar.
The UINavigationController screen is a UIView (in figure below, in red), that haves an image in the top and a UIScrollView (in figure below, in green). The UIScrollView have two UILabel ("Some text") and a UITableView that DO NOT ENABLE SCROLLING.
Every time the list become bigger, i need to enlarge the tableview height, dynamically. At the same time, I think I need to enlarge the UIScrollView. See the image below:
How can I define the dynamical height to UITableView and UIScrollView?
My goal is: Every time the list become bigger, the UIScrollView become bigger too.
My environment:
My UITableView DO NOT ENABLE SCROLLING
I am using XCode 4.6 and the view is a FreeForm
My view is using AutoLayout
I tried to do this setting just the UItableview height, without success.
How can I do this?
You can calculate the height of table view bin the method
heightForCellAtIndexPath:
in this method you pass the height of each row in this you can calculate height by creating a globale variable and in this variable add the row height each time.
or you can find it by having no of rows * height of a row in height of a row is constant.
may this will help you.
I have a UITableView within a UIScrollView. It took me quite a lot of work to make it work.
The tableView is 640x350, I use the scroll view to scroll from one end of the cell to the next.
The scroll view is 320x350.
The scroll view's content size is 640x350
I'm running into this problem:
if I set scrollView's minimum zoom scale to 0.5, the tableview's width now fills the screen, but it's height is only half the screen. I would like the tableview to show more rows when I zoom out to 0.5.
First of all I would like to understand if this is the correct behavior, or the result of my tableView's content size and frame manipulations. The tableview has all springs and struts set in interface builder and should fill the frame available. This is my first attempt at zooming in months, and I don't remember how it works with zooming.
Can someone help me understand where and what do I need to adjust?
As far as I understand, I need to put the code into scrollViewDidZoom: that will manipulate the tableView's frame and content size.
PS. I"m returning the tableview from the viewForZooming: method of UIScrollView
What you are trying to achieve is pretty hard.
Solution 1 This solution uses the exact setup you have (UITableView inside UIScrollView).
You say that when you set the zoomScale to 0.5, you want your table view to fill the scrollView vertically. At 0.5, your table view must be 640x700 in order to fill the UIScrollView as you wish. For this to happen, on scrollViewDidZoom: you must resize the frame of the table view to 640x700
- (void)scrollViewDidZoom:(UIScrollView *)scrollView
{
// No matter what the zoomScale is, the tableView will be zoomed accordingly
// Only zoom the height of the table
tableView.frame = CGRectMake(0, 0, 640, 350 / zoomScale);
// Also, update the contentSize
scrollView.contentSize = CGSizeMake(640, 350 / zoomScale);
}
If you run the code above for zoomScale = 0.5 you will get a frame size of 640x700.
This only changes the frame of the table and doesn't change the heights of the cells. This means that as you zoom out, you will also see more cells in the tableview.
Solution 2 Use only UITableView
UITableView is a subclass of UIScrollView. This means it has the ability to zoom and scroll around.
Start with a UITableView with the size that you want on the screen. Then, after the content is loaded modify the contentSize and make it wider than your frame width. This should enable horizontal scrolling.
However, UITableViewCells have their frame set automatically to the width of the tableview frame. You can bypass this by using a custom UITableViewCell, with clipsToBounds=false. Inside it you will insert a UIView with the frame set to the width&height you desire and with no autoresizingMask. When the tableview will resize UITableViewCell frame, this will not affect your inner UIView.
In IB I have my UIView. Then I have a sub-UIView with a UIScrollView as a sub view. Then the UIScrollView has a sub-UIImageView. The UIScrollView and UIImageView are the same size. They're much bigger than the UIView of which they are subviews. I assumed this would make scrolling work. It doesn't. Is some sort of code required for scroll views to work?
You need to set UIScrollView.contentSize to match the total scrollable size, which is your subview frame size in this case.
As mentioned in the accepted answer, you must set the UIScrollView's contentSize property.
This can be done in Interface Builder.
Select the scroll view
Select the 'identity inspect' in Utilities pane on the right
Under 'User Defined Runtime Attributes' click the '+' button
Set the 'Key Path' value to 'contentSize'
Set the 'Type' value to 'Size'
Set the 'Value' value to '{width, height}' (eg: '{320, 600}')
Build and run and your scroll view will scroll.
The content inset does not affect scrolling. See What's the UIScrollView contentInset property for?
To scroll, you have to make the scrollview's frame smaller than its content, the contained image or view.
This might be obvious to most, but I spent ages wondering why my UIScrollView wouldn't scroll so I'm posting what was stopping me in case it helps anyone else:
The UIScrollView has to be of the dimensions of the visible area in which you wish it to be presented and not the size of it's contents.
Ridiculous on my behalf I know, but just in case it helps someone.
I placed all the content of my scrollview in IB. (buttons, labels, text fields, etc). The full size is 500 tall.
I then resized it to 436 tall in IB.
Then in code, I put this is viewDidLoad:
optionsScrollView.contentSize = CGSizeMake(320,500);
So that leaves 64 pixels that I can scroll. It works perfectly.
I also placed "UIScrollViewDelegate" in the <> braces of #interface for my .h file and tied the delegate outlet of the scrollview to File's owner in IB.
I could solve the scrolling problem with the following answer:
https://stackoverflow.com/a/39945124/5056173
By me the trick was:
You now need to set the height of the content UIView. You can then either specify the height of the content view (blech) or use the
height of the controls contained within by making sure the bottom
control is constrained to the bottom of the content view.
I have set the height and width of the view inside the scrollView with center vertical and horizontal alignment and that was the reason, why it did not work!
After deleting this constraints, I need to add equal width (scrollView and the view inside the scrollView) AND I set the height of the view inside the scrollView directly with the content. Which means: The last element in the view must have a bottom constraint to the view!!
The other important thing that I don't see mentioned here is that UIScrollView does not play nicely with AutoLayout. If it seems like you've done everything correctly, check if your ViewController has autolayout turned on and, if so, turn it off.
(Every time you scroll, the views are re-laid-out. Gak!)
So:
Make sure scrollview's contentSize is bigger than its frame.size
Make sure AutoLayout for the ViewController is turned off.
more, did you enable scrolling?
look at the property
#property(nonatomic, getter=isScrollEnabled) BOOL scrollEnabled
Make sure 3 things,
checking scrollView frame & contentView frame, u may find the answer
scrollView.isScrollEnabled = true
contentView of scrollView height didn't constraint with scroll view height
UIScrollView won't scroll!
reason: contentSize is same as (sub) view
should: contentSize is large than (sub) view
-> UIScrollView can scroll
how set UIScrollView contentSize?
two method:
in code
- (void)viewDidLoad {
[super viewDidLoad];
。。。
//[(UIScrollView *)self.view setContentSize:CGSizeMake(375, 1000)];
CGSize curScreenSize = UIScreen.mainScreen.bounds.size;
CGFloat scrollWidth = curScreenSize.width;
CGFloat scrollHeight = curScreenSize.height * 2;
[(UIScrollView *)self.view setContentSize:CGSizeMake(scrollWidth, scrollHeight)];
in UI (Storyboard)
Storyboard-》Identity Inspector-》User Defined Runtime Attributes-》 add new attribute:
contentSize
Type：Size
Value：{375, 1000}
Scroll view works with this:
Frame
then
contentSize
views or objects etc...
If your frame is set to your content size then it won't scroll.
So set your frame ( in IB right panel -> second last tab 'Size Inspector") to the length of your app ( in my case it is 367 as i have a navbar and a tab bar) then programatically set the contentSize to - yup you guessed it ... more than your frame so it can scroll.
Happy days!!
Is it possible to do vertical scrolling without horizontal scrolling in UIScrollView? How can I do this?
The property pageEnabled should set to TRUE, for paging scroll.
The contentSize's width is as the same as view's width, and the height of contentSize set the value you desired. Then, it will do vertical scrolling, but no horizontal scrolling in UIScrollView.
You can read this sample coes, ScrollViewSuite. Maybe there are something you need in the sample codes.