In AppFabric we see some suspended workflows. When we try manually to resume them we get error:
There was no endpoint listening at net.pipe://[server]/[webSite]/[folder]/[workflowFile].xamlx/System.ServiceModel.Activities_IWorkflowInstanceManagement that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
What could be the reason for this error? Where should be this endpoint defined?
This could be the result of net.pipe not being enabled on the site or application (bindings). If you enable full WCF diagnostic tracing you will see what the underlying problem is.
It can also be the result of a messed up config file. I once had to explicitly add the workflow control endpoint to the config myself.
Related
We are trying to reach to an API hosted in our company network using rest connector in ADF (SHIR is used). Linked service connection is successful but dataset is unable to read the data and copy activity is as well failing with below error. Please suggest your thoughts in resolving the same.
Failure happened on 'Source' side. ErrorCode=UserErrorFailToReadFromRestResource,'Type=Microsoft.DataTransfer.Common.Shared.HybridDeliveryException,Message=An error occurred while sending the request.,Source=Microsoft.DataTransfer.ClientLibrary,''Type=System.Net.Http.HttpRequestException,Message=An error occurred while sending the request.,Source=mscorlib,''Type=System.Net.WebException,Message=Unable to connect to the remote server,Source=System,''Type=System.Net.Sockets.SocketException,Message=A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond ,Source=System,'
This error is mostly seen due to firewall issues. You might want to verify your network firewall setting to allow the API request to be read.
Also, verify if your API call is working as expected using other API testing tools. If the issue persists you can raise a support ticket for engineers to investigate more on the issue.
If you are able to preview data in your source , then check your sink connection as this issue can occur when the Sink in the copy activity is behind a firewall, I was getting the same issue and I tried copying to a container without a firewall and it worked. Its weird that the error is related to Source and the issue is with Sink.
I'm trying to deploy an application via web deploy to a windows 2012 r2 server.
First tried installing iis, web deploy using the msi. After getting an unreachable error I saw somewhere that I needed wmsvc to be installed and installed it via powershell command Install-WindowsFeature Web-Mgmt-Service.
I stopped getting the unreachable error and started getting this error ->
Error: Could not complete the request to remote agent URL 'http://xx.x.xx.xx:8172/MSDEPLOYAGENTSERVICE'.
Error: The operation has timed out
On the server's event viewer under system I get the following error ->
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
Any idea of what could be going on? Did I miss something on the installation?
After this I also tried installing everything but without iis and I get the same error.
So, this is really not a PoSH issue.
Maybe you should consider movin gthis question to another forum.
Anyway, you have either real server config issues (this can sometimes mean wipe and rebuild - very ugly option - but if it's a virtual machine and you have a snapshot, just roll back), or an app causing this.
Typically for Schannel type of error, it has to do with application or service in machine not able to complete any SSL connection sort of connection.
The error state parameter of 1203 means client error connecting to server, ie invalid ClientHello from the client
See if you can collect more data by...
https://support.microsoft.com/en-us/help/260729/how-to-enable-schannel-event-logging-in-iis
I realized this is an old question, but in case somebody ran into the same issue, here are my solution.
I had to follow this guidelines : https://learn.microsoft.com/en-us/aspnet/web-forms/overview/deployment/configuring-server-environments-for-web-deployment/configuring-a-web-server-for-web-deploy-publishing-web-deploy-handler
Copy the resulting publishsetting file. In the Publish/Profile page import it.
In the Publish/Connection page, change the server to the server address with the 8172 port. Add the password. Change the Destination URL to the site to go to after the publish is completed.
Then after Validate connection was completed, go ahead and publish it!
I am using Web IDE and want to see the log by clicking on the arrow.I can only see an empty "Untitled" page. The Node.js app is running normally. Live edit is switch off.
After some minutes:
Gateway Timeout
The proxy server did not receive a timely response from the upstream server.
Reference #1.45bf1402.1511018717.3dddb8b
I'm not for sure what Web IDE you are referring to. The only one I'm aware of is the DevOps (which works for me below):
It seems to me like this error that you posted would indicate a temporary outage. Is it still an issue?
In any case, I would advise opening a support ticket if you encounter this issue again (more details about your account would help). I think the Bluemix proxy will time out requests if they take too long.
I have an agent and a server in different domains. The server acts as an MSMQ server and the agent acts as an MSMQ client. I am using the mqsender utility, which is part of the MSMQ tools.
My problem is that a message is not delivered when using the HTTP:// format string (the MSMQ is installed with HTTP support). Using the OS: format string works fine.
When using HTTP the messages are immediately moved to the Dead Letter queue and the Class is set to Unknown, so I do not know the reasons for this behaviour.
So, this works:
mqsender.exe /c:10 /j:dead /f:Direct=OS:il-mark-w2k3\private$\test
And this does not:
mqsender.exe /c:10 /j:dead /f:Direct=http://il-mark-w2k3/msmq/private$/test
I checked that MSMQ virtual directory exists. How can I trace the MSMQ operation to try and understand what is going on?
Thanks.
EDIT
All the commands work as expected when ran locally on the server.
Navigating to http://il-mark-w2k3/msmq/private$/test in the browser on the agent (and the server) results in 501 - Header values specify a method that is not implemented. The same error is received when navigating to http://il-mark-w2k3/msmq. I suppose that is OK, after all it is not 404 - Not Found, right?
EDIT2
I have succeeded to resolve the issue. IIS lacked Anonymous Authentication, it became obvious from observing its log - 401.2 HTTP error was there. All worked well after it was enabled. The mistery remains why did MSMQ display Class Unknown on the dead messages? On other machine the same setup produces Error : 401, which makes much more sense.
The logging for MSMQ is internal so you won't easily be able to see exactly why the message didn't get delivered without raising a support case with Microsoft.
I have a few blog posts on solving various MSMQ/HTTP issues.
The 17 entitled "MSMQ messages using HTTP just won't get delivered" may help.
Also make sure you check the IIS logs for information.
Cheers
John Breakwell
I have deployed a REST service on an external server (IIS7). When I start the service from VS on the Dev server it works fine. But on the server i get:
Request Error, The server encountered an error processing the request. Please see the service help page for constructing valid requests to the service.
How do I get more details on this error? I have looked in the log files directory that is configured under Logging feature for this web site in IIS Manager, but there are no files at all for this site it seems.
You should look in the Windows Event Log using the Event Viewer application (eventvwr.exe). Output to the IIS log files may be buffered so their contents may be updated after a restart, or when IIS is set to do it. Restarting IIS is a surefire way to force this.
Here is a blog post on how to do this.
I'm aware of 3 ways to get nicer errors:
Set UseVerboseErrors in InitializeService method. However, this won't give you anything if your error occurs before InitializeService is called (which happens).
Set IncludeExceptionDetailInFaults to true using an attribute before your service class.
Set IncludeExceptionDetailInFaults to true using web.config.