I have an app with one main TabBarController containing two tabs that control two different views, A & B. View A is a scrollView and View B is a TableView. When i initially load the app, the scrollview in view A is empty.
In order to add pages to my scrollView, I have set it up as follows: I go to view B and perform one modal segue to a view embedded with a navigationBar. The navigationBar only has one button, 'Cancel', which I use to dismiss the view. Otherwise, the user must click on an image an perform another modal segue to a different view. This view has no navigation bar, and has one button 'DONE', which I use to perform a modal segue back to the initial tabBarController.
Here's the problem: the page is added to the scrollView with no errors after I press 'DONE'. However, I believe I now have two instances of the same tabBarController floating around in memory. When I attempt to grab the views contained in the scrollView with a different button, it tells me that it is now empty (even though it was full during viewDidLoad and viewDidAppear).
How can I remove the initial tabBarController view or otherwise how can I segue back to the tabBarController that I have already allocated? Any help would be extremely appreciated! Thanks!
You shouldn't do a segue back to the original view controller. Rather, you should dismiss the current view controllers animated, and show your original tabBarController.
Inside the view you were segueing back from, add:
tabBarController *tabs = (tabBarController*)[[self presentingViewController]presentingViewController];
tabs.selectedViewController = [tabz.viewControllers objectAtIndex:0];
[[[self presentingViewController] presentingViewController] dismissViewControllerAnimated:YES completion:nil];
Then you will have the view A appear and still use the same allocation.
Related
I've got a storyboard with view A that is inside a navigation controller. I dynamically add subView B to view A. Subview B has a table view, and the table view cell has a seque (push) to a detail view. When I click on the cell, the prepareForSegue method is called, but the detail view is never displayed. If I switch the seque to a modal, then the detail view gets displayed inside view A, where subView B was.
What I want to happen is the detail view gets pushed onto the navigation controller and when the user hits back on the detail view it goes back to view A, with the subview B embedded.
Below is the code I use for adding the subview:
if(!self.homeViewController){
self.homeViewController = [self.storyboardinstantiateViewControllerWithIdentifier:#"HomeView"];
}
if(self.currentViewController != self.homeViewController)
{
[self.view insertSubview:self.homeViewController.view belowSubview:self.tabBar];
[self.currentViewController removeFromParentViewController];
}
self.currentViewController = self.homeViewController;
Without seeing your code (and storyboard) this may be hard to diagnose. I have found, however, that sometimes it's a chore to get segues to work properly with dynamically loaded content. In some cases I have found that using the pushViewController:animated: and popViewController:animated methods of the UINavigationController can be a better approach. You should be able to access the UINavigationController by through UIViewcontroller.navigationController.
Im writing an application which the main view controller is a UIViewController. It has some icons in a grid and I want to dismiss (sliding down) this grid when one of the icons is clicked. This I've done already. The problem is: when the grid is dismisseed I want another View to come from the top of the screen. This view is in this same root view controller. But I want to display the content of other view controllers in this view. For example: I want this view to show a UINavigationController with a UITableView inside it, so the user can navigate through TableViews.
I'm doing this:
HorariosViewController *horarios = [[HorariosViewController alloc] init];
[vuashView addSubview:horarios.view];
HorariosViewController is a UINavigationViewController. It shows me only a blue NavigationBar and changes like self.navigationItem.title = #"Title" won't work.
Thanks!
You can show another view controller's views as subviews but their outlets and actions remain linked to their original view controller unless you write code to make new connections, so self.whatever shouldn't be expected to affect the other view controller's properties.
(Also, if HorariosViewController is a UINavigationController, it shouldn't be created as a UIViewController.)
One approach is to have the navigation controller already there, with the icon grid presented modally on top of it. (you can set the view up this way without animations, so the user doesn't see the navigation controller underneath).
Then, when it's time for the grid to go away, it can call dismissModalViewController on itself with animation.
I have a simple uiviewcontroller with 4 buttons. Every buttonclick event loads a different image on the view. However for the 4th button i want to launch a navigation controller based uiview with a uitableview. The table view can then have 3 levels which define the settings for the application.
On selecting a row in the uitableview on the 3rd level i need to return to my main view with the selected row index.
How can i add a navigation based view which will be launched on a button press event and the first view of the uinavigationcontroller should compose of a back button which will close this navigation view and return to main view.
TIA,
Praveen S
Edit:
My first(home) view does not need a navigation bar. The view launched from the home view should however consist of a navigation bar with back button.
if(nxtv12==nil){
nxtv12=[[v12 alloc] initWithNibName:#"v12" bundle:nil];
}
[self.navigationController pushViewController: nxtv12 animated:YES];
and for coming back to home.
[self.navigationController popToRootViewControllerAnimated:YES];
Create a UINavigationViewController object in the current UIViewController (or use self.navigationcontroller) and push the new UIView into the navigation controller. To come back to the same view, use popToRootViewControllerAnimated in the new UIView class.
I've been reading the Head First iPhone Development book and I understand how to get to a new view from a table but how exactly would I be able to get to a new view or view controller, by just simply pressing a button? Is that even possible?
I mean there are some apps where you click a button, not a table cell and it loads a new view. How exactly is that done? If someone could help out a newbie it would be greatly appreciated!
I think what you're looking for is a modal vew controller. THis presents a modal view like you described on top of everything else. If rootViewController is the view controller that is displaying your current view, and myNewViewController the view controller you want to display modally:
[rootViewController presentModalViewController:myNewViewController animated:YES];
There's plenty of examples of this kind of thing on the net, just search for presentModalViewController
Like bpapa said in the comments, it's hard to be specific without code. However, generally what you want to do is:
Build a navigation controller that contains one original view.
Create a button in your original view using the Interface Builder.
Build a callback method (usually defined with IBAction) that is run when the button is pushed.
In that callback method, create a new view and push it onto the navigation controller the same way you would using a table view cell.
Alternately, if you only want one level of hierarchy, you could use a modal view controller; instead of pushing onto the navigation controller in the last step, just present the modal view controller.
The general answer is that you have an object that manages which view controller loads when.
The most commonly used is the UINavigationController. It is a UIViewController that instead of controlling views, controls other view controllers. It works like a simple stack. You push views you want to display onto the nav's controller stack and when you want them to disappear you pop them off.
A common (though sloppy) way of using a nav is to make it a property of your app delegate. Then anywhere in your app you can references it by:
UINavigationController *nav=[[[UIApplication sharedApplication] delegate] navigationController];
The view controller for the first the user sees is held in the nav's topViewController property. If you want to load a view based on a user action in the topViewController.view, you would have something like this:
- (IBAction) loadNextView:(id) sender{ // Action called by a a UI event such as a button press.
UINavigationController *nav=[[[UIApplication sharedApplication] delegate] navigationController];
UIViewController *nextViewController=...// load from nib, connect with IBOutlet, create programmatically
[nav pushViewController:nextView animated:YES];
}
The first view disappears to be replaced by the next one. To return to the first view, you have a method in the next view controller like so:
- (IBAction) unloadSelf:(id) sender{ // Action called by a a UI event such as a button press.
UINavigationController *nav=[[[UIApplication sharedApplication] delegate] navigationController];
[nav popViewControllerAnimated:YES];
}
... and the nav returns you automatically to the previous view regardless of what that view was.
When you first start out, especially if you use Interface Builder, the structure of the app is largely hidden. Behind the scenes all view controllers and their views exist in a hierarchy of some kind that leads back up to the app delegate. You should train yourself to think in hierarchal terms even if it is not immediately obvious how that hierarchy is constructed.
I have created an UITabView application. Each view selected from the bar is a seperate controller with own nib file. I switch between them succesfully.
In the first view I have two buttons (check out the screenshot). When clicking them I want to switch to another views which are the parts of the current view controller. I use:
[self presentModalViewController:anotherViewController animated:NO];
That switches the view, but hides the UITabBar. How to keep the bar on the screen after the switch?
P.S. Sorry for the blurred image. I am not allowed to share to much info.
Well I think you are misusing the modal view controller. For a problem like this I'll say you should put them in a view controller stack using UINavigationController. Instead of making each tab a UIViewController make it a UINavigationController, then you can push and pop view controllers on it, which still show the tab bar.
See http://developer.apple.com/iphone/library/documentation/UIKit/Reference/UINavigationController_Class/Reference/Reference.html
use: tabBarController.selectedViewController = newViewController
edit: UINavigationController is not needed here.