I want to figure out how can I put a file in the root folder of the project and use it in run time, there it will be accessible.
The problem that I have by doing that (placing the file in the root folder)-is that by default it means:
It is not in the classpath of the project.
It is not copied to the bin (output) folder.
I can’t see how my modifications of the file will affect the run process.
As I know there is a similar mechanism in eclipse that does the same:
The Plugin development project has a file-"plugin.xml" in the root folder of the project.
When you make a change in the file without building the project or copying it to the bin folder the changes take place when you run it.
example:
add an extension point in ”plugin.xml” and hit “RUN”, it will take place immediately.
Does anybody have an idea how this mechanism works in eclipse?
Edit - for clarification :
I am interested in how the launcher of eclipse Plugin development project loads\handles the "plugin.xml" file.
I assume when you say you want to put a file in a "root folder of the project" you are refering to a plugin that you are developing and then in runtime you want to get access to that file. Please don't vote me down if I did not understand that question correctly but based on my understanding here are some steps to follow:
Open your MANIFEST.MF file /MANIFEST.MF, this will oepn a multipage editor.
Click on the build tab (third from right).
This is where you specify what resources in your plugin you want the builder to include in the plugin at runtime. You will notice that plugin.xml is already checked which is why extensions get updated each time.
Check the resource on this editor page for the resource you want to be able to load and access at runtime. Behind the scenes this is updating your build.xml which the internal builder uses to figure out what sources to build/add when building/exporting the plugin.
One you have done that this is how you can get access to that file, you get the Bundle for your plugin and call the getEntryMethod with the path to your file and then open in inputstream from there you can load it as a File or whatever you want. Code example below: Hope this helps - Duncan
Bundle myBundle = Platform.getBundle("com.mycompany.myplugin.id")
InputStream in = myBundle.getEntry("/myfile.txt").openStream();
Related
As previous Eclipse user switched to IntelliJ I would like to be able to access folder external to my project from inside the IDE, while developing.
In Eclipse I was using the feature Creating linked resources.
I wonder if there is any feature in IntelliJ that helps me to access external files and folder in a similar way (for instance, if I want to edit the configuration of my application server which is located outside my project).
Yes you can do it by adding an new content root in your module.
You do that from
Project Structure (alt+ctrl+shift+s) - Modules - "My-Module" - + Add Content root
Now you have the contents of the added folder available in your project.
I was searching for a way to get the asset folder link working in IntelliJ as it was working in Eclipse and I found following link in the wikis of libgdx itself.
Linking the asset directories
It describes basically three approaches:
Just copy the asset folder into the desktop folder. (BAD)
Use the asset folder in the android project as working directory for the desktop project through 'Run-Configurations'. (GOOD)
Create a symbolic-link (GOOD)
I tested the 2nd option and it's working fine for me.
I hope it's OK to ask this here. Netbeans forums isn't responding. If not, I'll delete this or ask for it to be deleted. I'm desperate so I'll face the wrath, if any.
I moved my Netbeans projects folder from one directory node to another to make backing up all my stuff easier. BAD MOVE.
Now when I open a project using Files | Open project (ctrl-shift-O) NO source files appear because there is no "+Source Packages" node to expand.
It looks like this for all projects, e.g. one named GBL:
Projects
-GBL
+Libraries
It doesn't look like this anymore:
Projects
-GBL
+Source Packages (How do I get this back?)
+Libraries
The Netbeans Properties for each project shows me the path it's using. Windows 7 Explorer shows me that the src, build, and nbproject folders contain files and ALL the source files are in the src folder for that path.
What have I done and more importantly what should I do to get back to being able to open a project normally?
(I've tried recreating the original Netbeans folder and using Windows Explorer to copy an entire project folder into it but: same result--all I see is the Libraries node under the project's name node.)
I just tried to Clean (and also Build) to see what would happen. Error:
ant -f C:\\Users\\Dov\\Documents\\NetBeansProjects\\BasicShirt -Dnb.internal.action.name=build jar
C:\Users\Dov\Documents\NetBeansProjects\BasicShirt\nbproject\build-impl.xml:[u]231[/u]:
Must set src.dir
I just Set Configuration by right-clicking the project's name and provided a path to the src folder.
NOW I SEE MY SOURCE FILES BUT NOW THIS line in the .xml file is flagged with similar message:
<fail unless="[u][b]test[/b][/u].src.dir">Must set test.src.dir</fail>
NOW what do I do? (Netbeans 7.4.)
If I could get rid of the 7.4 automatic creation of +Test Packages, I might be OK.
If you can help, I'd be very happy.
(I'm considering re-installing 7.3 if available or removing and reinstalling 7.4 and try to avoid the "testing" requirement, but there goes all my many tweaks of 7.4.)
Well, after considerable frustration with the problem, I solved it, essentially.
It's here, in total. My synopsis plus how it helped me follows. In short, I had to set up a new java project based on existing sources using the New Project Wiz and simply direct Netbeans to the sources.
File > New Project
Choose Java Project with Existing Sources.
Type a (new) project name and ...
... make the Project Folder contains the path to where you want the new project to be stored. (For me, this is the folder where Netbeans has been able to find my sources.)
Click Next for the Existing Sources page of the wizard and ...
5a. ... in the Source Packages Folder pane, click Add Folder and ...
5b. ... navigate to your sources and select the source root folder.
Clicking Next goes to the Includes/Excludes pane, which I didn't need to use.
What is the straight-forward way of importing one of the GWT samples in eclipse Helios + GWT 2.1.1. It seems like the content of the zip file doesn't contain any project files for eclipse.
I tried the following:
create a GWT project 'bla'
Delete the src ad war folder and
replace it with the src and war
folder from the sample
refresh the project in eclipse
hit 'run'
[ERROR] Unable to find
'bla/bla.gwt.xml' on
your classpath; could be a typo, or
maybe you forgot to include a
classpath entry for source?
So I go to the run configuration and remove the path for the example projects from the arguments list. I also changed the name of hosted html page to the one in the sample. Hit 'run' and:
[ERROR] Invalid version number "2.0"
passed to external.gwtOnLoad(),
expected "2.1"; your hosted mode
bootstrap file may be out of date;
Now I need an out of date version of GWT to run these samples? What is going on, I just want to look at a sample to learn a new concept.
Reading the readme.txt in the GWT samples directory I came across a solution that works on Eclipse 3.7. Assuming you have ant installed on your machine, execute the following from the sample's directory:
ant eclipse.generate
This will generate both the .classpath and .project files needed to import the sample into Eclipse and run it.
Here the relevant excerpt from README.txt:
-- Option A: Import your project into Eclipse (recommended) --
If you use Eclipse, you can simply import the generated project into
Eclipse. We've tested against Eclipse 3.4 and 3.5. Later versions
will likely also work, earlier versions may not.
If the directory containing this file does not have a .classpath or
.project file, generate them by running 'ant eclipse.generate'
In Eclipse, go to the File menu and choose:
File -> Import... -> Existing Projects into Workspace
Browse to the directory containing this file, select "Mail".
Be sure to uncheck "Copy projects into workspace" if it is checked.
Click Finish. You can now browse the project in Eclipse.
To launch your web app in GWT development mode, go to the Run menu and
choose:
Run -> Open Debug Dialog...
Under Java Application, you should find a launch configuration
named "Mail". Select and click "Debug".
You can now use the built-in debugger to debug your web app in
development mode.
In eclipse 3.7, instead of Run -> Open Debug Dialog..., its Run -> Debug Configurations. I got both the showcase and mail samples running following those commands. Should work for all of the other samples as well.
The examples that come with GWT SDK were built in different ways. Some are Maven builds, others use Ant. Eclipse can handle these common builds directly, but you have to choose the right option.
So, if you want to open the Expenses project in eclipse, you would look in the projects root directory (i.e. ../gwt2.4/samples/Expenses) where you'll find a file called pom.xml. That is a Maven build file. To import it into your Work space select:
File->Import...
Open Maven->Existing Maven Projects, and click on Next > button
Browse your file system til you reach the Expenses folder. Click on it and Select OK.
At this point it will show you the Projects in that directory in the Projects: area of the window...only one in this case: /pom.xml com.google.gwt.sample.expenses:...etc.
click on the checkbox for that project, Next>
Finally, it ask you to map plugins. You'll need to select in the drop down menu under Actions the required plugins (such as m2e).
In other project folders you may find a build.xml file instead. That's an Ant build file. To import that you do something similar, but different (of course!):
File->New->Project...
Open the Java folder and select "Java Project from Existing Ant Buildfile", Next >
Click the Browse button, dig through your directory to the project folder and select the build.xml file, and Open it.
Project name should fill in automatically, just select the declaration to use in the middle window and click Finish.
Since those tutorial only include the src and war directory, the idea remains to:
create a new project following this tutorial
remove any created class part of the example files which are automatically added (see Issue 1547)
Unfortunately the Google Plugin does not allow to created a new Web Application Project without creating template files. The template files are nice for the first try but annoying if you want to start from scratch with a new GWT application.
copy the src and war directory in place within the now empty project
Following your ticket 5847 (No easy and straight-forward way to make examples work in eclipse),
as xo4yhamope comments, you need the right GWT option.
and did you consider the Issue 5038 about the error message:
Unable to find 'xxxx.gwt.xml' on your classpath;
could be a typo, or maybe you forgot to include a classpath entry for source?
This message usually means you attempted to refresh the browser before dev mode has had a chance to finish loading the module.
The uppercase/lowercase confusion happens because the module has been renamed to 'stockwatcher', but dev mode cannot map 'stockwatcher' to "StockWatcher' until it has finished loading the entire module.
So, it's just a matter of waiting a few seconds longer after the Development Mode pane says I should go to http://127.0.0.1:8888/StockWatcher.html?gwt.codesvr=127.0.0.1:9997 ?
That seems a little messed up. It should wait until it's actually ready before telling me it's ok, because users (like me) are going to go there as soon as the UI says it's ready.
The other confusing part is that the server begins serving the host page as soon as that message in the UI comes up. Because this was happening, I assumed that the server was completely up, even though (as it turns out) it wasn't.
Anyway, waiting a few more seconds seems to resolve the "Unable to find 'stockwatcher.gwt.xml' on your classpath" problem. Thanks!
I'm beginning to suspect this is a bug in the samples. I am adding this answer so it can be marked as an answer when I get confirmation about that.
I was trying out some other samples and came across this page. At the top is a little explanation for how to download and import the sample.
Before you begin
The StockWatcher project
This tutorial builds on the GWT
concepts and the StockWatcher
application created in the Build a
Sample GWT Application tutorial.
If you have not completed the Build a
Sample GWT Application tutorial and
are familiar with basic GWT concepts,
you can import the StockWatcher
project as coded to this point.
Download the StockWatcher project.
Unzip the file.
Import the project into Eclipse
From the File menu, select the Import... menu option.
Select the import source General > Existing Projects into
Workspace. Click the Next button.
For the root directory, browse to and select the StockWatcher
directory (from the unzipped file).
Click the Finish button.
If you are using ant, edit the
gwt.sdk property in
StockWatcher/build.xml to point to
where you unzipped GWT.
Now this is what I call straight-forward and easy.
At that point I had already built the StockWatcher in a previous tutorial but I got intrigued by the fact that it was explained exactly as I tried it the first time. So I downloaded the project and it had the correct eclipse project structure. I tried to import it 'et voila' I have the project in eclipse. I runs out of the box (with warnings). That is how expected the samples to be.
This experience leads me into thinking that the sample projects are malformed (as eclipse projects) and need to be updated. Let's hope my issue report leads to results.
-- Option A: Import your project into Eclipse (recommended) --
If you use Eclipse, you can simply import the generated project into Eclipse.
We've tested against Eclipse 3.4 and 3.5. Later versions will likely also
work, earlier versions may not.
If the directory containing this file does not have a .classpath or .project
file, generate them by running 'ant eclipse.generate'
In Eclipse, go to the File menu and choose:
File -> Import... -> Existing Projects into Workspace
Browse to the directory containing this file,
select "Mail".
Be sure to uncheck "Copy projects into workspace" if it is checked.
Click Finish.
You can now browse the project in Eclipse.
Copy from readme.txt supplied by samples. I tried this method, it's OK.
To import GWT showcase(2.5.1) I did following steps:
Create a new Google Web Application Project
New –> Other –> Google –> Web Application Project
Provide the project name “Showcase” and the Package name is com.google.gwt.sample.showcase
Click Finish
Go to eclipse plugin folder and traverse to the gwt
Under that folder go to gwt-2.3.\samples\Showcase
Copy (Ctrl C) all the contents. The contents are
a. src
b. test
c. war
d. build.xml
e. README.txt
In the eclipse, right click on the Showcase project and paste. Overwrite all the files
The files should start copying without any problem
Right click on the Showcase and Run As “Web Application”
You should have your Showcase working like Gem!
For me it worked like a charm ;)
Ref : http://simplestepswebdev.wordpress.com/2011/05/16/import-gwt-samples-into-eclipse/
I have a workspace with a dynamic web project in it. When I try to copy and paste the project into the same workspace, eclipse asks for the name of the new project, then it copies the files.
The problem I have is that when I deploy this project to the server it gets deployed with the original name and not the new name.
It looks like eclipse is not updating all the old name references when it makes the copy.
How do I make a good clean copy of an existing project?
After some more searching I found this in the eclipse bug site.
Steps To Reproduce:
create a Dynamic Web Project and call it "Project1"
copy and paste this project, in order to create another one which is a clone
of the first; in the "Paste" dialog, specifiy "Project2" as the name of the
target project (instead of "Copy of Project1")
OBSERVED BEHAVIOUR:
The context root of the target project is the same as the source project. This
could be a problem, but it can be easily updated in the project settings and/or
in the server editor (module tab).
However, even the module name is the same, while it's usually equal to the
project name. So, in Project2/.settings/org.eclipse.wst.common.component I find
the following:
This causes problems when deploying modules to the server. Moreover, the module
name can't be easily changed through the GUI from anywhere.
EXPECTED BEHAVIOUR:
The copy&paste operation should update the web module name to "Project2", just
like it happens when you rename a project.
WORKAROUND:
Make sure the module corresponding to the target project has not been added to
the server. Then, manually edit
Project2/.settings/org.eclipse.wst.common.component and change the deploy-name
attribute value of the wb-module element. Close and restart Eclipse (!!!) and
the new name will be taken. If you don't restart Eclipse, even if you edit
org.eclipse.wst.common.component from within Eclipse, WTP does not take the
change (it seems it's caching it somewhere in memory...).
I'd like to manually create the folders/files on the file system that create a new project in a workspace in eclipse, and show up in the Project Explorer when eclipse is started and the workspace is selected.
What files would need to be created to do this and where would they need to be?
Please understand that I do not want to open eclipse and make a new project using eclipse. I want to make a new project without using eclipse.
I think you will need to do the following
create a .project file and whatever other files needed by your specific type of project (for example java projects need .classpath) in the project folder, you can find out what you need by looking at those files for another project.
In your workspace .metadata folder, this is where eclipse keeps information about the current workspace, I think the plugin responsible for project definition is .metadata/.plugins/org.eclipse.core.resources , you will need to create those files yourself, some of them are binary, so you will need to open up the source of that plugin to see exactly how it writes them. Depending on your project, you will need to write more .metadata plugin information (for maven for example).
There is no easy way of doing this. Each new project modifies many scattered files throughout the eclipse structure (if you want a list, make a new project and find files created/modified most recently, and/or search for the project name.)
Short of writing the files by hand, there's not much you can do. I found these links in my reseach, but they're both pretty old and seem to be dead ends:
http://www.eclipsezone.com/eclipse/forums/t107019.html
http://dev.eclipse.org/newslists/news.eclipse.tools/msg36546.html
Based on the answers of #shipmaster I think this will work.
Go the workspace and create a new folder as your new required project name.
Copy the contents like .project, .classpath, .includepath etc from any existing project and modify the same like project name, source folder, build folder etc in .project. Do the similar changes in .classpath etc as per the new project requirements.
Unfortunately this is not enough to create a project by just doing eclipse restart so we need to do an import project and point it to this folder and we are ready to use the same now and we see the new project created in eclipse!
try archiving the file .. right click on project ---> export --->archive file(in General section) ..after you archive it as a zip you can import it after.
IF you want to manually copy a pre-existing project to a new workspace,
I have a solution for you:
Copy the project folder.
Paste it into the new work space.
File > Import > General > Existing Project Into Workspace
Eclipse will now see the project you cut+pasted manually.
Why I am doing this:
I am doing this so I can build upon my scrum stories while keeping documentation via working files that each successive step was built upon.
E.g. Story #2 is built upon story#1 code. But I don't want to version them because I want to be able to open them up one after another to do a presentation on my work flow.