I want to draw a route between two places. I have the GPS value of those places. I can get the GPS route values between those places from the google api http://maps.google.com/maps?output=dragdir&saddr=&daddr=.
I want to know that will google reject my app. Because I found that "the Directions API may only be used in conjunction with displaying results on a Google map; using Directions data without displaying a map for which directions data was requested is prohibited. Additionally, calculation of directions generates copyrights and warnings which must be displayed to the user in some fashion. For complete details on allowed usage, consult the Maps API Terms of Service License Restrictions"
Ple give me clarification on this.
You may not use the Google Maps API unless you use it with a Google Map. To use the direction data you would have to use a UIWebView with a javascript based Google Map.
Related
Bing is comprehensive and it isn't Google. Also I was given to understand that Bing maps integrates OpenStreetMaps data. An answer for OpenStreetMaps would also be acceptable; it's the capability that matters: construct a URL that causes a browser to show a path on a map.
I don't want to embed Bing maps as a control in a web application. I want to construct an HTTP request (GET or POST) to launch Bing maps in its own right in another tab or browser supplying a small series of points (probably GPX format) to be shown as a route on the map.
It's the structure of the URL (and payload if applicable) that interest me. If you want to put code in an answer Javascript, Typescript or server side C# are all no problem.
When I research this I find loads of info on using an API to request a route between two points. This would be fabulous if I were trying to create yet another nav app but the requirement here is simply show this series of points as a path on a map.
I can do it for a single point (sample lifted from another question's answer) https://www.bing.com/maps/?v=2&cp=53.0210235~-1.48398532&lvl=16&dir=0&sty=c&sp=point.53.0210235_-1.48398532_My%20Phone
The Microsoft APIs documented here all require a registration and key because they're intended for Enterprise applications that support embedded maps in branded apps with the enterprise paying for use.
My application is FOSS and is intended for a private individual to plonk half a dozen points on a map in the course of trying to figure out where a phone was lost without consenting to being tracked by Google or a phone manufacturer.
The example above launches Bing maps and passes a point. Is there some kind of URL based way to get Bing maps to launch in its own right - not hosted in another app - and show a series of points for display as a path? If so, what search terms should be used when looking for details? The answer from which I lifted the sample has a link but it no longer produces the docs.
If you want to just open the bing maps website with some information drawn on the map, the documentation for that is here: https://learn.microsoft.com/en-us/bingmaps/articles/create-a-custom-map-url
To draw a polyline on the map, take a look at the section titled "collections" which describes how to add points, lines, or polygons to the map. As a quick example, this URL will create a simply polyline: https://bing.com/maps/default.aspx?sp=Polyline.47.68_-122.12_48.68_-123.12_49.68_-122.12_LINE_some%20notes_http://bing.com__%2300ff00__4px_Single_Solid
I am working on an iPhone map application and wanted to know whether it was possible to request any labels visible on Google Maps given a longitude/latitude and radius?
For example if I gave the following location to this Google Maps API, I would get back McCullough Hall, Moore Hall, etc. The list would be any place labels visible on the map (doesn't have to be just restaurants, businesses).
If this is possible can you direct me to where I can learn more about this. If this isn't possible, can you direct me towards another API where it is possible?
Look into Googles reverse geocoding, I think that's what you're looking for.
The short answer, you cannot!.
The only way is to search for places by name and get a reference key to query the place details including lat/lng. Not the other way around.
IMHO, this is mainly a policy of Google instead of being technical limitation.
Is it possible to display nearby businesses in mapkit? If not, how else can that be done?
Is there a way to display by category - restaurant, retail, museums?
Also, I don't think displaying traffic flow is available. Can anyone confirm?
The current version of MapKit does not support such features.
It's main capabilities currently are:
a scrollable/zoomable map
reverse geocoding (get the address for some given lat/long coordinates)
add annotations (pins) at a given lat/long
show phone's current location
show Standard, Satellite, or Hybrid view
To display nearby businesses, you would have to:
query a third-party for that information which would ideally return lat/long coordinates
add annotations to the map using the returned coordinates
This is an interesting and emerging business idea!
I live in Nordic region and there is an open Mashups especially for sweden.
By open i mean, any one can request and get access to the content to find nearby Cafe / WiFi / Sushi restaurants etc..
BEGIN PLUG WARNING
Check my iphone application which fetches content from the mashups and display using MapKit!
END PLUG WARNING
And there is a commercial content provider called Info24 for nordic countries at the moment.
Like DyingCactus said, it's not currently possible without using your own calls to one of the mapping service providers. There are options available, though.
One of them is CloudMade. They have a good iPhone library and support almost all of your requirements.
Check out the API at Cloudmade.com
I know this thread is kind of old, but i figured out a free alternative to do what you are looking for, more or less. You just nee to tap into a maps.google.com service and get a kml or JSON output. I used KML (XML) becuase i found the filesize to be consistently smaller. I wrote a 3 part series on my blog about how to do this for anyone that is interested.
http://www.zen-sign.com/finding-business-listings-and-displaying-with-mapkit-part-1/
http://www.zen-sign.com/finding-business-listings-and-displaying-with-mapkit-part-2/
http://www.zen-sign.com/finding-business-listings-and-displaying-with-mapkit-part-3/
I've looked at Google's map API, which is all javascript and terribly slow on the iPhone. I then tried using the link option available at maps.google.com. That is fast but I can't see having much control over it. It also displays a little search box at the top of the map. Google's API says you must use maps in a website, which the iPhone isn't. I'm not sure about licensing for maps.google.com.
Urbanspoon's scope option does everything I want with maps in regards to displaying nearby businesses based on your location. Given the limited set of tools available for Google maps without mapkit, I don't know how they are doing it. It looks as though they have somehow integrated with mapkit. Clicking an annotation shows the callout and another click pushes a new view with details from that pin. Any ideas how this can be done?
-- EDIT --
Just to be clear, mapkit doesn't display surrounding businesses. That's the crux of the problem and I'm not sure how Urbanspoon got past it.
You can also use the Google AJAX Search API: http://code.google.com/apis/ajaxsearch/
It's a Javascript library, but for Flash, and other Non-Javascript environments, the API exposes a raw RESTful interface that returns JSON encoded results.
And within this API, what you want is the 'Local Search' if you are looking for nearby businesses based on the location.
Urbanspoon probably gets the data for the locations of nearby businesses via some other method than the MapKit API.
Then its likely that they use the MapKit API to display custom MapKit Annotations at those locations.
If you are looking for a business data provider you could look into yelp's API.
I am writing an app that will use Reverse Geocoding to translate the user's current location into something like a Street Address or City. It seems the only way to get this kind of information is via MapKit (specifically the Placemark class).
Can I use this without having to display a map to the user?
The reason I am asking this is because in the Google HTTP Reverse Geocoding documentation it states:
Note: the geocoding service may only be used in conjunction with displaying results on a Google map; geocoding results without displaying them on a map is prohibited. For complete details on allowed usage, consult the Maps API Terms of Service License Restrictions.
I'm wondering if this holds true for the MapKit API as well or if Google and Apple worked something out.
I answer my own question way too much around here -
10.12 use or display the Content without a corresponding Google map, unless you are explicitly permitted to do so in the Maps API Documentation, the Street View API Documentation, or through written permission from Google (for example, you must not use geocodes obtained through the Service except in conjunction with a Google map, but the Street View API Documentation explicitly permits you to display Street View imagery without a corresponding Google map); or
via Google Maps iPhone TOS
The Map Kit framework provides an embeddable map interface for your application. Use it to display map or satellite imagery from the windows and views of your custom applications. You can also use the framework to annotate your maps with points of interest and other custom information.
What was stated above about using Googles HTTP API for reverse geocoding would be a better way to display the information you are looking for and using a text box to read the information.