I'm trying figure how to decode a syslog priority code in powershell. I know the priority code is a combination of the facilty and severity of the message, and that the facility is mutiplied by 8 before being added to the severity code, but I'm not sure how to code this in Powershell.
So the priority of 37/8 = 4.625, which gives you a 4=Facility
and the priority of 37-(4*8)=5, which gives you a 5=Severity
The 4 Facility is a security/authorization message
The 5 Severity is a Notice: normal
All of this is outlined in the RFC 3164 (http://www.ietf.org/rfc/rfc3164.txt), but I'm not sure how I can do this decoding in Powershell code
try this (no bitwise):
function get-syslog {
param($pri)
[int]$facility = [Math]::truncate([decimal]($pri/8))
$severity = $pri - ($facility *8 )
"Facility is $facility - Severity is $severity"
}
use:
get-syslog -pri 23
Facility is 2 - Severity is 7
Related
I am trying to process a flag from the MECM command Get-CMTaskSequenceDeployment called 'AdvertFlags'.
The information from Microsoft in relation to this value is HERE
The value returned is designated as : Data type: UInt32
In the table of flags, the one I need to check is listed as :
Hexadecimal (Bit)
Description
0x00000020 (5)
IMMEDIATE. Announce the advertisement to the user immediately.
As part of my Powershell script I am trying to ascertain if this flag is set.
I can see by converting it to Binary that a particular bit gets set.
When the settings is enabled:
DRIVE:\> [convert]::ToString((Get-CMTaskSequenceDeployment -AdvertisementID ABC20723).AdvertFlags, 2)
100110010000000000100000
When the setting is disabled:
DRIVE:\> [convert]::ToString((Get-CMTaskSequenceDeployment -AdvertisementID ABC20723).AdvertFlags, 2)
100110010000000000000000
The 6th bit is changed. Great! So far though, I've been unable to find a way to check if this bit is set. I suspected something in the bitwise operators (-band -bor etc) would help me here but I've been unable to get it to work.
Any bitwise operation I try returns an error:
"System.UInt64". Error: "Value was either too large or too small for a UInt64."
I mean, I can compare the string literally, but other options may be changed at any point.
Any help greatly appreciated.
EDIT: Just as an example of the error I am seeing, I can see that the bit that is set is '32' and from my limited understanding I should be able to:
PS:\> '100110010000000000100000' -band '32'
Cannot convert value "100110010000000000100000" to type "System.UInt64". Error: "Value was either too large or too small for a UInt64."
At line:1 char:1
+ '100110010000000000100000' -band '32'
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvalidCastIConvertible
But I just always return an error
To test bit6 in
$AdvertFlags = (Get-CMTaskSequenceDeployment -AdvertisementID ABC20723).AdvertFlags
Should simply be:
if ($AdvertFlags -band 32) { 'bit6 is set' } else { 'bit6 is not set' }
I do not have access to a deployment environment with Get-CMTaskSequenceDeployment cmdlet, nevertheless to confirm what I am stating:
$AdvertFlags = [Convert]::ToUInt32("100110010000000000100000", 2)
$AdvertFlags
10027040
if ($AdvertFlags -band 32) { 'bit6 is set' } else { 'bit6 is not set' }
bit6 is set
$AdvertFlags = [Convert]::ToUInt32("100110010000000000000000", 2)
$AdvertFlags
10027008
if ($AdvertFlags -band 32) { 'bit6 is set' } else { 'bit6 is not set' }
bit6 is not set
Your self-answer using [bigint]'100110010000000000100000' -band "32" to test for bit6 is merely a coincident that it returns the expected value:
10027035..10027045 |ForEach-Object {
$Binary = [convert]::ToString($_, 2)
[pscustomobject]#{
Binary = $Binary
bAnd = $_ -bAnd 32
Bigint = [bigint]$Binary -band "32"
}
}
Yields:
Binary bAnd Bigint
------ ---- ------
100110010000000000011011 0 0
100110010000000000011100 0 0
100110010000000000011101 0 0
100110010000000000011110 0 32 # ← incorrect
100110010000000000011111 0 32 # ← incorrect
100110010000000000100000 32 32
100110010000000000100001 32 32
100110010000000000100010 32 32
100110010000000000100011 32 32
100110010000000000100100 32 0 # ← incorrect
100110010000000000100101 32 0 # ← incorrect
enumerations as flags
But PowerShell has an even nicer way to test them by name:
[Flags()] enum AdvertFlags {
IMMEDIATE = 0x00000020 # Announce the advertisement to the user immediately.
ONSYSTEMSTARTUP = 0x00000100 # Announce the advertisement to the user on system startup.
ONUSERLOGON = 0x00000200 # Announce the advertisement to the user on logon.
ONUSERLOGOFF = 0x00000400 # Announce the advertisement to the user on logoff.
OPTIONALPREDOWNLOAD = 0x00001000 # If the selected architecture and language matches that of the client, the package content will be downloaded in advance
WINDOWS_CE = 0x00008000 # The advertisement is for a device client.
ENABLE_PEER_CACHING = 0x00010000 # This information applies to System Center 2012 Configuration Manager SP1 or later, and System Center 2012 R2 Configuration Manager or later.
DONOT_FALLBACK = 0x00020000 # Do not fall back to unprotected distribution points.
ENABLE_TS_FROM_CD_AND_PXE = 0x00040000 # The task sequence is available to removable media and the pre-boot execution environment (PXE) service point.
APTSINTRANETONLY = 0x00080000 #
OVERRIDE_SERVICE_WINDOWS = 0x00100000 # Override maintenance windows in announcing the advertisement to the user.
REBOOT_OUTSIDE_OF_SERVICE_WINDOWS = 0x00200000 # Reboot outside of maintenance windows.
WAKE_ON_LAN_ENABLED = 0x00400000 # Announce the advertisement to the user with Wake On LAN enabled.
SHOW_PROGRESS = 0x00800000 # Announce the advertisement to the user showing task sequence progress.
NO_DISPLAY = 0x02000000 # The user should not run programs independently of the assignment.
ONSLOWNET = 0x04000000 # Assignments are mandatory over a slow network connection.
TARGETTOWINPE = 0x10000000 # Target this deployment to WinPE only.
HIDDENINWINPE = 0x20000000 # Target this deployment to WinPE only but hide in WinPE. It can only be used by TS variable SMSTSPreferredAdvertID.
}
# $AdvertFlags = [AdvertFlags](Get-CMTaskSequenceDeployment -AdvertisementID ABC20723).AdvertFlags
$AdvertFlags = [AdvertFlags][Convert]::ToUInt32("100110010000000000100000", 2)
# or: $AdvertFlags = [AdvertFlags]('IMMEDIATE', 'ENABLE_PEER_CACHING', 'APTSINTRANETONLY', 'OVERRIDE_SERVICE_WINDOWS', 'SHOW_PROGRESS')
$AdvertFlags
IMMEDIATE, ENABLE_PEER_CACHING, APTSINTRANETONLY, OVERRIDE_SERVICE_WINDOWS, SHOW_PROGRESS
$AdvertFlags -bAnd [AdvertFlags]'IMMEDIATE'
IMMEDIATE
EDIT: My answer here is incorrect as noted above. Leaving here for prosperity!
As always I BELEIVE I found the answer minutes after posting (After spending a couple hours on this!).
By adjusting the type to [bigint] the comparison was able to complete and return the expected answer:
DRIVE:\> [bigint]'100110010000000000100000' -band "32"
32
So a simple:
If (([bigint]'100110010000000000100000' -band "32") -gt 0){$true}else{$false}
True
and:
If (([bigint]'100110010000000000000000' -band "32") -gt 0){$true}else{$false}
False
Solves my issue. Feel free to give any extra advice if this is not the ideal way to proceed.
I though PS would be smarted when auto defining types etc. This is targeting PS5 on Server 2012 R2 though.
I am trying to compile this piece of CL code using Rational Series but keep getting error.
This is my CL code:
PGM
DCLF FILE(LAB4DF)
SNDRCVF RCDFMT(RECORD1) /* send, recieve file */
DOWHILE (&IN03 = '0')
SELECT
WHEN (&USERINPUT = '1' *OR &USERINPUT = '01') CALLSUBR OPTION1
OTHERWISE DO
*IN03 = '1'
ENDDO
ENDSELECT
ENDDO
SUBR OPTION1
DSPLIBL
ENDSUBR
ENDPGM
And this is my DSPF code
A R RECORD1
A 1 38'LAB 4'
A 3 3'Please select one of the following-
A options:'
A 6 11'3. Maximum Invalid Signon Attempt-
A s allowed'
A 8 11'5. Run Instructor''s Insurance Pr-
A ogram'
A 5 11'2. Signed on User''s Message Queu-
A e'
A 1 3'Yathavan Parameshwaran'
A 7 11'4. Initial number of active jobs -
A for storage allocation'
A 4 11'1. Previous sign on by signed on -
A user'
A 14 11'F3 = Exit'
A 14 31'F21 = Command Line'
A 2 70TIME
A 1 72DATE
A 9 11'Option: '
A USERINPUT 2 B 9 19
A 91 DSPATR(RI)
A 92 DSPATR(PC)
A MSGTXT1 70 O 11 11
A MSGTXT2 70 O 12 11
Is there a problem with my CL code or DSPF code?
You forgot to say what error you were getting. It's always important to put all the information about error messages into your questions.
There are two errors.
&IN03 is not defined
Your assignment to *IN03 should be to &IN03, but that's not how you do an assignment in CLP
If you want to be able to press F3, you have to code something like CA03(03) in the "Functions" for the record format.
To assign a variable in CL, code
CHGVAR name value
Looking at the documentation here, I suspect you need to add RCDFMT to your DCLF spec like so:
DCLF FILE(LAB4DF) RCDFMT(RECORD1)
SNDRCVF RCDFMT(RECORD1) /* send, recieve file */
If you really do only have 1 record format in your display file, then you can also omit the RCDFMT from both commands like so:
DCLF FILE(LAB4DF)
SNDRCVF /* send, recieve file */
I am using Xtext 2.9 formatter and I am trying to format hiddenRegion which contains comment. Here is part of my document region i am trying to format:
Columns: 1:offset 2:length 3:kind 4: text 5:grammarElement
Kind: H=IHiddenRegion S=ISemanticRegion B/E=IEObjectRegion
35 0 H
35 15 S ""xxx::a::b"" Refblock:namespace=Namespace
50 0 H
50 1 S "}" Refblock:RCBRACKET
E Refblock PackageHead:Block=Refblock path:PackageHead/Block=Package'xxx_constants'/head=Model/packages[0]
51 0 H
51 1 S ":" PackageHead:COLON
E PackageHead Package:head=PackageHead path:Package'xxx_constants'/head=Model/packages[0]
52 >>>H "\n " Whitespace:TerminalRule'WS'
"# asd" Comment:TerminalRule'SL_COMMENT'
15 "\n " Whitespace:TerminalRule'WS'<<<
B Error'ASSD' Package:expressions+=Expression path:Package'xxx_constants'/expressions[0]=Model/packages[0]
67 5 S "error" Error:'error'
72 1 H " " Whitespace:TerminalRule'WS'
and corresponding part of the grammar
Model:
{Model}
(packages+=Package)*;
Expression:
Error | Warning | Enum | Text;
Package:
{Package}
'package' name=Name head=PackageHead
(BEGIN
(imports+=Import)*
(expressions+=Expression)*
END)?;
Error:
{Error}
('error') name=ENAME parameter=Parameter COLON
(BEGIN
(expressions+=Estatement)+
END)?;
PackageHead:
Block=Refblock COLON;
Problem is that when i try prepend some characters before error keyword
for example
error.regionFor.keyword('error').prepend[setSpace("\n ")]
This indentation is prepended before the comment and not behind it. This results into improper formatting in case of single line comment before the 'error' keyword.
To provide more clarity, here is example code from my grammar and description of desired behavior:
package xxx_constants {namespace="xxx::a::b"}:
# asd
error ASSD {0}:
Hello {0,world}
This is expected result: (one space to the left)
package xxx_constants {namespace="xxx::a::b"}:
# asd
error ASSD {0}:
Hello {0,world}
and this is the actual result with prepend method
package xxx_constants {namespace="xxx::a::b"}:
# asd
error ASSD {0}:
Hello {0,world}
As the document structure says, the HiddenRegion is in this case is the statement:
# asd
error
How can i prepend my characters directly before the keyword 'error' and not before the comment? Thanks.
I assume you're creating an indentation-sensitive language, because you're explicitly calling BEGIN and END.
For indentation-sensitive language my answer is: You'll want to overwrite
org.eclipse.xtext.formatting2.internal.HiddenRegionReplacer.applyHiddenRegionFormatting(List<ITextReplacer>)
The methods append[] and prepend[] you're using are agnostic to comments and at a later time applyHiddenRegionFormatting() is called to decide how that formatting is weaved between comments.
To make Xtext use your own subclass of HiddenRegionReplacer, overwrite
org.eclipse.xtext.formatting2.AbstractFormatter2.createHiddenRegionReplacer(IHiddenRegion, IHiddenRegionFormatting)
For languages that do not do whitespace-sensitive lexing/parsing (that's the default) the answer is to not call setSpace() to create indentation or line-wraps.
Instead, do
pkg.interior[indent]
pkg.regionFor.keyword(":").append[newLine]
pkg.append[newLine]
I've been struggling with this for a couple of days, and none of the solutions I've found work the way I'd like (I can be completely wrong, I've not used SNMP for a very long time, though).
This is existing code in my company, a perl application that connects to net-snmp agentx using POE::Component::NetSNMP::Agent. MIB defined for this application is defined, with base oid finished in .154. The MIB file defines 3 tables on it: status (.1), statistics (.2) and performance (.3). Everything works fine, registration with the agent goes fine, snmpwalk shows data being updated, etc.
But now a requirement has been implemented, allowing multiple (up to 32) instances of the application running in the same host. And monitoring shall be supported too, which brings the first issue: when connecting to agentX more than once, with the same OID, only one instance connects, and the others are refused.
I've though to make something like this:
.154
.1 (instance 1):
.1 (status table)
.2 (statistics table)
.3 (performance table)
.2 (instance 2):
.1 (status table)
.2 (statistics table)
.3 (performance table)
.3 (instance 3):
.1 (status table)
.2 (statistics table)
.3 (performance table)
[...]
.32 (instance 32):
.1 (status table)
.2 (statistics table)
.3 (performance table)
With this approach, each instance (they know their own id) can register to AgentX with no problems (nice!). Following the model above, tables for status, statistics and performance would be common to all instances.
querying to .154 would show the model above.
querying data for each specific instance by walking to .154.1, .154.2, etc would be possible too.
But I'm unable to get this running properly, as smlint, snmpwalk and iReasoning moan about different data types expected, data is not being shown the right way, etc.
What I've tried so far:
arrays: main index per instance, subindex on status, statistics and performance indexed with { main index, subindex}. Like this: SNMP: ASN.1 MIB Definitions. Referencing a table within a table.
Multiple definitions: re-define every table and component for the 32 instances, with different indices on names. It works moreover, but not exactly the way I was expecting: an snmpwalk of the parent does not show any child, so snmpwalk must be performed using . . . . .154.1, . . . . . .154.2, etc.
I've considered this solution as well: Monitoring multiple java processes on the same host via SNMP. But in my case does not work, as the instances connect to a common agent, they don't have their own agent running in a different port.
I have to admit I'm running out of ideas. Again, I could be completely wrong and could be facing the problem from a wrong perspective.
Is it possible to implement this the way I'm looking for? In SNMPv3 this could possibly be a good use for contexts, but they are not available in net-snmp to my knowledge.
edit
Solution number two, from my list above, is the one working better by far.
From parent MIB, 32 new child OIDs are defined:
sampleServer MODULE-IDENTITY
LAST-UPDATED "201210101200Z"
[...]
DESCRIPTION "Sample Server MIB module"
REVISION "201211191200Z" -- 19 November 2012
DESCRIPTION "Version 0.1"
::= { parentMibs 154 }
instance1 OBJECT IDENTIFIER ::= { sampleServer 1 }
instance2 OBJECT IDENTIFIER ::= { sampleServer 2 }
instance3 OBJECT IDENTIFIER ::= { sampleServer 3 }
instance4 OBJECT IDENTIFIER ::= { sampleServer 4 }
instance5 OBJECT IDENTIFIER ::= { sampleServer 5 }
instance6 OBJECT IDENTIFIER ::= { sampleServer 6 }
[...]
And tables are repeated for each instanceId, a python script wrote the big MIB file for this (I know,
-- the table contains static information for instance number 1
-- this includes version, start time etc
sampleStatusTable1 OBJECT-TYPE
SYNTAX SEQUENCE OF sampleStatusEntry1
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "sample Server instance1 Status, table"
::= { instance1 1 }
[...]
-- this table contains statistics and sums that change constantly
-- please note that depending on sample_server configuraiton not all
-- of these will be filled in
sampleStatisticsTable1 OBJECT-TYPE
SYNTAX SEQUENCE OF sampleStatisticsEntry1
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "sample Server Statistics, table"
::= { instance1 2 }
[...]
-- performance figures that reflect the current load of sample_server
samplePerformanceTable1 OBJECT-TYPE
SYNTAX SEQUENCE OF samplePerformanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "sample Server Performance, table"
::= { instance1 3 }
[...]
snmpwalk output for each instance:
snmpwalk -M +/opt/sample_server/docs/mibs -m +COMPANY-SAMPLE-MIB -v2c -cpublic localhost 1.3.6.1.1.1.2.154.1
COMPANY-SAMPLE-MIB::sampleStatusInstance1 = INTEGER: 1
COMPANY-SAMPLE-MIB::sampleStatusVersion1 = STRING: "3.58"
COMPANY-SAMPLE-MIB::sampleStatusStartTime1 = STRING: "2014-12-13T00:06:27+0000"
COMPANY-SAMPLE-MIB::sampleStatisticsInstance1 = INTEGER: 1
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPInputTransactions1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPInputErrors1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputTransactions1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputErrorsRecoverable1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputErrors1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsEntry1.7 = INTEGER: 0
COMPANY-SAMPLE-MIB::samplePerformanceInstance1 = INTEGER: 1
COMPANY-SAMPLE-MIB::samplePerformanceQueueLoad1 = INTEGER: 0
COMPANY-SAMPLE-MIB::samplePerformanceThroughput1 = INTEGER: 0
snmpwalk -M +/opt/sample_server/docs/mibs -m +COMPANY-SAMPLE-MIB -v2c -cpublic localhost 1.3.6.1.1.1.2.154.2
COMPANY-SAMPLE-MIB::sampleStatusInstance2 = INTEGER: 1
COMPANY-SAMPLE-MIB::sampleStatusVersion2 = STRING: "3.58"
COMPANY-SAMPLE-MIB::sampleStatusStartTime2 = STRING: "2014-12-13T00:06:27+0000"
COMPANY-SAMPLE-MIB::sampleStatisticsInstance2 = INTEGER: 1
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPInputTransactions2 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPInputErrors2 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputTransactions2 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputErrorsRecoverable2 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputErrors2 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsEntry2.7 = INTEGER: 0
COMPANY-SAMPLE-MIB::samplePerformanceInstance2 = INTEGER: 1
COMPANY-SAMPLE-MIB::samplePerformanceQueueLoad2 = INTEGER: 0
COMPANY-SAMPLE-MIB::samplePerformanceThroughput2 = INTEGER: 0
But the result it's not as good as I was expecting, because a snmpwalk to master .154 shows the status for .154.1, instead of showing for every instance. Not sure if this is the expected behavior.
snmpwalk -M +/opt/sample_server/docs/mibs -m +COMPANY-SAMPLE-MIB -v2c -cpublic localhost 1.3.6.1.1.1.2.154
COMPANY-SAMPLE-MIB::sampleStatusInstance1 = INTEGER: 1
COMPANY-SAMPLE-MIB::sampleStatusVersion1 = STRING: "3.58"
COMPANY-SAMPLE-MIB::sampleStatusStartTime1 = STRING: "2014-12-13T00:06:27+0000"
COMPANY-SAMPLE-MIB::sampleStatisticsInstance1 = INTEGER: 1
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPInputTransactions1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPInputErrors1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputTransactions1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputErrorsRecoverable1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsHTTPOutputErrors1 = INTEGER: 0
COMPANY-SAMPLE-MIB::sampleStatisticsEntry1.7 = INTEGER: 0
COMPANY-SAMPLE-MIB::samplePerformanceInstance1 = INTEGER: 1
COMPANY-SAMPLE-MIB::samplePerformanceQueueLoad1 = INTEGER: 0
COMPANY-SAMPLE-MIB::samplePerformanceThroughput1 = INTEGER: 0
I'm trying to sign old Hitachi driver that makes USB flash drive appear as fixed disk
(Quite useful when you have fast, large thumb drives)
Driver itself works fine but I constantly get same error when try to get it signed:
Errors:
22.9.10: cfadisk.sys in [cfadisk_copyfiles] is missing from [SourceDisksFiles] section in
\cfadisk.inf; driver may not sign correctly until this is resolved.
22.9.10: disk.sys in [gendisk_copyfiles] is missing from [SourceDisksFiles] section in
cfadisk.inf; driver may not sign correctly until this is resolved.
This is my .inf file:
[Version]
Signature="$Windows NT$"
Class=DiskDrive
ClassGuid={4D36E967-E325-11CE-BFC1-08002BE10318}
Provider=%HGST%
DriverVer=10/14/2012,9.9.9.9
CatalogFile=cfadisk.cat
[Manufacturer]
%HGST% = cfadisk_device,ntAMD64
[DestinationDirs]
cfadisk_copyfiles=12 ; %SystemRoot%\system32\drivers
gendisk_copyfiles=12 ; %SystemRoot%\system32\drivers
[cfadisk_copyfiles]
cfadisk.sys
[gendisk_copyfiles]
disk.sys
[cfadisk_device]
%Microdrive_devdesc% = cfadisk_install,USBSTOR\Disk&Ven_SanDisk&Prod_Extreme&Rev_0001
[cfadisk_device.NTamd64]
%Microdrive_devdesc% = cfadisk_install,USBSTOR\Disk&Ven_SanDisk&Prod_Extreme&Rev_0001
[cfadisk_addreg]
HKR,,"LowerFilters",0x00010008,"cfadisk"
[cfadisk_install]
CopyFiles=cfadisk_copyfiles,gendisk_copyfiles
[cfadisk_install.HW]
AddReg=cfadisk_addreg
[cfadisk_install.Services]
AddService=disk,2,gendisk_ServiceInstallSection
AddService=cfadisk,,cfadisk_ServiceInstallSection
[gendisk_ServiceInstallSection]
DisplayName = "Disk Driver"
ServiceType = 1
StartType = 0
ErrorControl = 1
ServiceBinary = %12%\disk.sys
LoadOrderGroup = SCSI Class
[cfadisk_ServiceInstallSection]
DisplayName = "CompactFlash Filter Driver"
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\cfadisk.sys
LoadOrderGroup = Pnp Filter
; -----------------------
[Strings]
HGST = "Hitachi"
Microdrive_devdesc = "SanDisk Extreme"
I was using this tutorial as reference point:
http://www.deploymentresearch.com/Blog/tabid/62/EntryId/63/Sign-your-unsigned-drivers-Damn-It.aspx
cfadisk.inf and sys can be downloaded here:
link is at the beginning of first post
http://hardforum.com/showthread.php?t=1655684
Any help would be greatly appreciated
EDIT:
I just used chkinf utility on this .inf file
Here is the output:
C:\DriversCert\SanDisk\cfadisk.inf: FAILED
NTLOG REPORT--------------
Total Lines: 62 |
Total Errors: 1 |
Total Warnings: 4 |
--------------------------
Line 0: ERROR: (E22.1.1003) Section [SourceDisksNames] not defined.
Line 0: WARNING: (W22.1.2212) No Copyright information found.
Line 0: WARNING: (W22.1.2111) [SourceDisksFiles] section not defined - full CopyFiles checking not done.
Line 17: WARNING: (W22.1.2112) File "cfadisk.sys" is not listed in the [SourceDisksFiles].
Line 20: WARNING: (W22.1.2112) File "disk.sys" is not listed in the [SourceDisksFiles].
I'm really no programer so I really don't understand what does all this mean.
Strange thing is that driver does work, I just can't get i signed.
Thank you!
Best regards,
Walter
It means that some sections are missed. In your case they are [SourceDisksFiles] and [SourceDisksNames]
In this specific situation you just should add:
[SourceDisksFiles]
cfadisk.sys = 1
disk.sys = 1
[SourceDisksNames]
1 = %DiskName%, ,
and also add a record to [String] section in the bottom:
DiskName="Disk Drive"