What i would like to do is have a Top 10, but the 10th entry is called "Other" with the sum of everything bar the top 9 within it and has a total. So basically it looks like this:
ReportingDate FundCode Currency Duration Contribution Percentage
31/10/2012 1111 Malaysian Ringgit 0.5 14.6
31/10/2012 1111 Turkish Lira 0.3 13.5
31/10/2012 1111 Russian Rouble 0.5 11.9
31/10/2012 1111 Indunesian Rupiah 0.6 11.7
31/10/2012 1111 Mexican Peso 0.6 11.7
31/10/2012 1111 Polish Zloty 0.3 10.2
31/10/2012 1111 Mexican Peso 0.4 10.1
31/10/2012 1111 Polish Zloty 0.3 9.9
31/10/2012 1111 South African Rand 0.2 5.8
31/10/2012 1111 Brazilian Real 0.3 2.0
31/10/2012 1111 Other 0.6 -1.4
31/10/2012 1111 Total 4.6 100.0
My code currently looks like this:
;;WITH CTE AS
(
SELECT
ReportingDate
, PortfolioID
, DV.dmv_nme AS Currency
, RANK() OVER (PARTITION BY PortfolioID ORDER BY SUM(Percentage) DESC) AS [Rank]
, ISNULL(CAST(SUM(DurationContribution)/100.0 AS DECIMAL(22,1)),0) AS [Duration Contribution]
, CAST(SUM(Percentage) AS DECIMAL(22,1)) AS [Weight]
FROM #Worktable as WT
INNER JOIN dw_domain_value AS DV
ON DV.dmv_value = WT.Currency
AND DV.data_cls_num = 2
GROUP BY WT.ReportingDate
, WT.PortfolioID
, DV.dmv_nme
)
SELECT
ReportingDate
, PortfolioID
, Currency
, [Rank]
, [Duration Contribution]
, [Weight]
FROM CTE
WHERE [Rank] <= 10
ORDER BY ReportingDate, PortfolioID, [Rank], [Weight] DESC
So this gives me the top 10 fine. So how could i get it so that the final 10th line is "Other" with everything bar the top 9 summed within it, and also include a total at the end?
Here is one solution. But you may be able to move it into the CTE for better performance.
;;WITH CTE AS
(
SELECT
ReportingDate
,PortfolioID
,DV.dmv_nme AS Currency
,RANK() OVER (PARTITION BY PortfolioID ORDER BY SUM(Percentage) DESC) AS [Rank]
,ISNULL(CAST(SUM(DurationContribution)/100.0 AS DECIMAL(22,1)),0) AS [Duration Contribution]
,CAST(SUM(Percentage) AS DECIMAL(22,1)) AS [Weight]
FROM #Worktable as WT
INNER JOIN dw_domain_value AS DV
ON DV.dmv_value = WT.Currency
AND DV.data_cls_num = 2
GROUP BY WT.ReportingDate
, WT.PortfolioID
, DV.dmv_nme
)
SELECT
ReportingDate
, PortfolioID
, CASE WHEN [Rank] <= 10 THEN Currency ELSE 'Total' END As Currency
, SUM([Duration Contribution]) As [Duration Contribution]
, SUM([Weight]) As [Weight]
FROM CTE
GROUP BY
ReportingDate
, PortfolioID
, CASE WHEN [Rank] <= 10 THEN Currency ELSE 'Total' END As Currency
WITH ROLLUP
ORDER BY ReportingDate, PortfolioID, [Rank], [Weight] DESC
For this i decided i couldn't use CTE, so ended up having to insert these section by section into a temp table as so:
/* Include only top 9 */
INSERT INTO #FinalOutput
SELECT
ReportingDate
, PortfolioID
, PortfolioNme
, Currency
, [Rank]
, DurationContribution
, [Weight]
FROM #WorktableGrouped
WHERE [Rank] <= 9
ORDER BY ReportingDate, PortfolioID, [Rank], [Weight] DESC
/* Aggregate everything outside the top 9 into other */
INSERT INTO #FinalOutput
SELECT
ReportingDate
, PortfolioID
, PortfolioNme
, 'Other' AS Currency
, 10 AS [Rank]
, SUM(DurationContribution) AS DurationContribution
, SUM([Weight]) AS [Weight]
FROM #WorktableGrouped
WHERE [Rank] > 9
GROUP BY ReportingDate, PortfolioID, PortfolioNme
ORDER BY ReportingDate, PortfolioID, [Rank], [Weight] DESC
SELECT * FROM #FinalOutput
/* Final Select with roll up for total per portfolio */
SELECT
ReportingDate
, PortfolioID
, PortfolioNme
, CASE
WHEN GROUPING_ID(ReportingDate, PortfolioID, PortfolioNme, Currency, [Rank]) = 3 THEN 'Total'
ELSE Currency
END AS Currency
, CASE
WHEN GROUPING_ID(ReportingDate, PortfolioID, PortfolioNme, Currency, [Rank]) = 3 THEN 11
ELSE [Rank]
END AS [Rank]
, ISNULL(CAST(SUM(DurationContribution) AS DECIMAL(22,1)),0) AS [Duration Contribution]
, CAST(SUM([Weight]) AS DECIMAL(22,1)) AS [Weight]
--, GROUPING_ID(ReportingDate, PortfolioID, PortfolioNme, Currency, [Rank])
FROM #FinalOutput
GROUP BY ReportingDate
, PortfolioID
, PortfolioNme
, Currency
, [Rank] WITH ROLLUP
HAVING GROUPING_ID(ReportingDate, PortfolioID, PortfolioNme, Currency, [Rank]) IN (0,3)
ORDER BY ReportingDate, PortfolioID, [Rank]
Related
I'm trying to display an accounting report where I show total transactions, voids, the transaction fee, and a total amount for each transaction type.
TransactionType Amount TransactionCount TotalAmount
AgentCredit -$1.00 49 -$49.00
MailFee -$1.25 11 -$13.75
MailFee $1.25 531 $663.75
HardCardFee -$5.00 7 -$35.00
HardCardFee $5.00 239 $1,195.00
QuotaHuntFee -$2.00 1 -$2.00
QuotaHuntFee $2.00 202 $404.00
But what I want to display would look like the following:
TransactionType Amount TransactionCount TotalAmount TotalTrans Voids
AgentCredit -$1.00 49 -$49.00 49 0
MailFee $1.25 520 $650.00 531 11
HardCardFee $5.00 232 $1,160.00 239 7
QuotaHuntFee $2.00 201 $402.00 202 1
Would it be possible to group the transaction types using the absolute value of the Amount and calculate the grand total along with the transaction count & void counts?
This is on SQL Server 2014.
Thanks,
I think this does it
declare #T table (nm varchar(20), prc smallmoney, amt int);
insert into #T values
('AgentCredit', -1.00, 49)
, ('MailFee', -1.25, 11)
, ('MailFee', 1.25, 531)
, ('HardCardFee', -5.00, 7)
, ('HardCardFee', 5.00, 239)
, ('QuotaHuntFee', -2.00, 1)
, ('QuotaHuntFee', 2.00, 202);
with cte as
(
select t.*, (t.prc * t.amt) as net
, count(*) over (partition by t.nm, abs(t.prc)) as cnt
, row_number() over (partition by t.nm, abs(t.prc) order by t.prc) as rn
, lag(t.prc) over (partition by t.nm, abs(t.prc) order by t.prc) as prPrc
, lag(t.amt) over (partition by t.nm, abs(t.prc) order by t.prc) as prAmt
, case when lag(t.prc) over (partition by t.nm, abs(t.prc) order by t.prc) < 0 then t.amt - lag(t.amt) over (partition by t.nm, abs(t.prc) order by t.prc)
else t.amt
end as bal
from #T t
)
select *, ISNULL(t.prAmt, 0) as void
, bal*prc as nnet
from cte t
where t.cnt = 1
or t.rn = 2
order by t.nm, t.prc;
There's a bit of confusion around your results with the data you've provided. HardCardFee has 7 and 23 in the sample you provided, but you want to return 232 for the total?.. MailFee also has some inconsistent math. Also, your 'Voids' returns 0 for the first row; however, it seems as if there are 49?
Perhaps this query could get you started down the right path:
DECLARE #Table TABLE (TransactionType varchar(20), Amount decimal(10,2), TransactionCount int, TotalAmount decimal(10,2))
INSERT #Table
VALUES ('AgentCredit' ,-$1.00 ,49 ,-$49.00 ),
('MailFee' ,-$1.25 ,11 ,-$13.75 ),
('MailFee' ,$1.25 ,531 ,$663.75 ),
('HardCardFee' ,-$5.00 ,7 ,-$35.00 ),
('HardCardFee' ,$5.00 ,23 ,$1195.00 ),
('QuotaHuntFee' ,-$2.00 ,1 ,-$2.00 ),
('QuotaHuntFee' ,$2.00 ,202 ,$404.00 )
;WITH c AS (
SELECT TransactionType, Amount, TransactionCount, TotalAmount,
CASE WHEN t.Amount + ABS(t.Amount) = 0 THEN '-' ELSE '' END +
CAST(t.TransactionCount AS VARCHAR(10)) AS TCount
FROM #Table t
)
SELECT t.TransactionType
,MAX(t.Amount) AS Amount
,SUM(CAST(t.TCount AS INT)) AS TransactionCount
,SUM(t.TotalAmount) AS TotalAmount
,SUM(ABS(t.TransactionCount)) AS TotalTrans
,ABS(MIN(t.TCount)) AS Voids
FROM c t
GROUP BY TransactionType
Again, not sure about some of the values provided.
I'm trying to find the maximum sequence of days by customer in my data. I want to understand what is the max sequence of days that specific customer made. If someone enter to my app in the 25/8/16 AND 26/08/16 AND 27/08/16 AND 01/09/16 AND 02/09/16 - The max sequence will be 3 days (25,26,27).
In the end (The output) I want to get two fields: custid | MaxDaySequence
I have the following fields in my data table: custid | orderdate(timestemp)
For exmple:
custid orderdate
1 25/08/2007
1 03/10/2007
1 13/10/2007
1 15/01/2008
1 16/03/2008
1 09/04/2008
2 18/09/2006
2 08/08/2007
2 28/11/2007
2 04/03/2008
3 27/11/2006
3 15/04/2007
3 13/05/2007
3 19/06/2007
3 22/09/2007
3 25/09/2007
3 28/01/2008
I'm using PostgreSQL 2014.
Thanks
Trying:
select custid, max(num_days) as longest
from (
select custid,rn, count (*) as num_days
from (
select custid, date(orderdate),
cast (row_number() over (partition by custid order by date(orderdate)) as varchar(5)) as rn
from table_
) x group by custid, CURRENT_DATE - INTERVAL rn|| ' day'
) y group by custid
Try:
SELECT custid, max( abc ) as max_sequence_of_days
FROM (
SELECT custid, yy, count(*) abc
FROM (
SELECT * ,
SUM( xx ) OVER (partition by custid order by orderdate ) yy
FROM (
select * ,
CASE WHEN
orderdate - lag( orderdate ) over (partition by custid order by orderdate )
<= 1
THEN 0 ELSE 1 END xx
from mytable
) x
) z
GROUP BY custid, yy
) q
GROUP BY custid
Demo: http://sqlfiddle.com/#!15/00422/11
===== EDIT ===========
Got "operator does not exist: interval <= integer"
This means that orderdate column is of type timestamp, not date.
In this case you need to use <= interval '1' day condition instead of <= 1:
Please see this link: https://www.postgresql.org/docs/9.0/static/functions-datetime.html to learn more about date arithmetic in PostgreSQL
Please see this demo:
http://sqlfiddle.com/#!15/7c2200/2
SELECT custid, max( abc ) as max_sequence_of_days
FROM (
SELECT custid, yy, count(*) abc
FROM (
SELECT * ,
SUM( xx ) OVER (partition by custid order by orderdate ) yy
FROM (
select * ,
CASE WHEN
orderdate - lag( orderdate ) over (partition by custid order by orderdate )
<= interval '1' day
THEN 0 ELSE 1 END xx
from mytable
) x
) z
GROUP BY custid, yy
) q
GROUP BY custid
Need help
Input
Date A B C
2015-10-31 1.49 3.7 7.8
2015-11-30 1.45 3.6 7.6
2015-12-31 1.41 3.7 8.0
2016-01-31 1.33 3.7 8.3
2016-02-29 1.29 4.1 8.6
2016-03-31 1.46 4.4 9.7
CREATE TABLE dbo.ThreeMonth(RDate DATE,A FLOAT,b FLOAT,C FLOAT)
INSERT into dbo.threemonth
( RDate , a , b,c)
VALUES ( '2015-10-31' , 1.49, 3.7,7.8)
INSERT into dbo.threemonth
( RDate , a , b,c)
VALUES ( '2015-11-30' , 1.45, 3.6,7.6)
INSERT into dbo.threemonth
( RDate , a , b,c)
VALUES ( '2015-12-31' , 1.41, 3.7,8.0)
INSERT into dbo.threemonth
( RDate , a , b,c)
VALUES ( '2016-01-31' , 1.33, 3.7,8.3)
INSERT into dbo.threemonth
( RDate , a , b,c)
VALUES ( '2016-02-29' , 1.9, 4.1,8.6)
INSERT into dbo.threemonth
( RDate , a , b,c)
VALUES ( '2016-03-31' , 1.46, 4.4,9.7)
INSERT into dbo.threemonth
( RDate , a , b,c)
VALUES ( '2016-04-30' , 1.35, 4.3,9.4)
SELECT * FROM threemonth
--Tried the Following query
select rdate, avg(A)
OVER (
ORDER BY Rdate
ROWS BETWEEN 2 PRECEDING AND CURRENT ROW
)
FROM threemonth
OutPut
I need TO display rolling 3 months average FOR 3 COLUMNS a,b,c .WHEN I ADD AVG(b) AND AVG(c) it gives ERROR
"Column 'threemonth.RDate' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause."
--Also I want the OUTPUT IN following format
2015-10-31 NULL -- Because 3 months are not available avg cannot be calculated
2015-11-30 NULL -- Because 3 months are not available avg cannot be calculated
2015-12-31 1.45
2016-01-31 1.39666666666667
2016-02-29 1.54666666666667
2016-03-31 1.56333333333333
2016-04-30 1.57 code here
Can somebody advise TO solve the above problem WHERE I need TO TAKE AVG FOR more THEN 1 COLUMN AND display OUTPUT IN the FORMAT I have shown above FOR ALL the 3 COLUMNS?
Somthing Like this
;with cteBase as (SELECT *,RowNr = Row_Number() Over (Order by RDate) FROM threemonth )
Select RDate,Avg=(select Avg(A) from cteBase where RowNr between A.RowNr-2 and A.RowNr and A.RowNr>2)
From cteBase A
Returns
RDate Avg
2015-10-31 NULL
2015-11-30 NULL
2015-12-31 1.45
2016-01-31 1.39666666666667
2016-02-29 1.54666666666667
2016-03-31 1.56333333333333
2016-04-30 1.57
For Cols A,B, and C
;with cteBase as (SELECT *,RowNr = Row_Number() Over (Order by RDate) FROM threemonth )
Select RDate
,AvgA=(select Avg(A) from cteBase where RowNr between A.RowNr-2 and A.RowNr and A.RowNr>2)
,AvgB=(select Avg(B) from cteBase where RowNr between A.RowNr-2 and A.RowNr and A.RowNr>2)
,AvgC=(select Avg(C) from cteBase where RowNr between A.RowNr-2 and A.RowNr and A.RowNr>2)
From cteBase A
I have a stock transaction table like this:
StockID Item TransDate TranType BatchNo Qty Price
10001 ABC 01-Apr-2012 IN 71001000 200 750.0
10002 ABC 02-Apr-2012 OUT 100
10003 ABC 03-Apr-2012 IN 71001001 50 700.0
10004 ABC 04-Apr-2012 IN 71001002 75 800.0
10005 ABC 10-Apr-2012 OUT 125
10006 XYZ 05-Apr-2012 IN 71001003 150 350.0
10007 XYZ 05-Apr-2012 OUT 120
10008 XYZ 15-Apr-2012 OUT 10
10009 XYZ 20-Apr-2012 IN 71001004 90 340.0
10010 PQR 06-Apr-2012 IN 71001005 50 510.0
10011 PQR 15-Apr-2012 IN 71001006 60 505.0
10012 MNO 01-Apr-2012 IN 71001007 76 410.0
10013 MNO 11-Apr-2012 OUT 76
Each of my IN transactions has price associated to it and a batch number (lot number). Now I would like to calculate the remaining quantity by First In First Out (FIFO) rule, meaning the first in should be adjusted with first out. After adjusting the quantities the remaining balances are to be calculated against each IN transaction for the same item as shown below:
StockID Item TransDate TranType BatchNo Qty Price RemainingQty
10001 ABC 01-Apr-2012 IN 71001000 200 750.0 0
10002 ABC 02-Apr-2012 OUT 100
10003 ABC 03-Apr-2012 IN 71001001 50 700.0 25
10004 ABC 04-Apr-2012 IN 71001002 75 800.0 75
10005 ABC 10-Apr-2012 OUT 125
10006 XYZ 05-Apr-2012 IN 71001003 150 350.0 20
10007 XYZ 05-Apr-2012 OUT 120
10008 XYZ 15-Apr-2012 OUT 10
10009 XYZ 20-Apr-2012 IN 71001004 90 340.0 90
10010 PQR 06-Apr-2012 IN 71001005 50 510.0 50
10011 PQR 15-Apr-2012 IN 71001006 60 505.0 60
10012 MNO 01-Apr-2012 IN 71001007 76 410.0 0
10013 MNO 11-Apr-2012 OUT 76
As we can see from the above table for item ABC, after adjusting (125 + 100) OUT qty against the IN qty (100 + 50 + 75) using FIFO the quantity remaining for the batch 71001000 is 0, 71001001 is 25 and for batch 71001002 is 75. From the remaining quantity the value can be derived.
Please help me to achieve this using any of the methods (either cursor based or CTE or JOINS, etc)
Thanks in advance for the help.
One of the users of StockOverflow suggested this answer:
SELECT 10001 as stockid,'ABC' as item,'01-Apr-2012' as transdate,'IN' as trantype, 71001000 as batchno, 200 as qty, 750.0 as price INTO #sample
UNION ALL SELECT 10002 ,'ABC','02-Apr-2012','OUT', NULL ,100,NULL
UNION ALL SELECT 10003 ,'ABC','03-Apr-2012','IN', 71001001, 50 , 700.0
UNION ALL SELECT 10004 ,'ABC','04-Apr-2012','IN', 71001002, 75 , 800.0
UNION ALL SELECT 10005 ,'ABC','10-Apr-2012','OUT', NULL ,125,NULL
UNION ALL SELECT 10006 ,'XYZ','05-Apr-2012','IN', 71001003, 150 , 350.0
UNION ALL SELECT 10007 ,'XYZ','05-Apr-2012','OUT', NULL , 120 ,NULL
UNION ALL SELECT 10008 ,'XYZ','15-Apr-2012','OUT', NULL , 10 ,NULL
UNION ALL SELECT 10009 ,'XYZ','20-Apr-2012','IN', 71001004, 90 , 340.0
UNION ALL SELECT 10010 ,'PQR','06-Apr-2012','IN', 71001005, 50 , 510.0
UNION ALL SELECT 10011 ,'PQR','15-Apr-2012','IN', 71001006, 60 , 505.0
UNION ALL SELECT 10012 ,'MNO','01-Apr-2012','IN', 71001007, 76 , 410.0
UNION ALL SELECT 10013 ,'MNO','11-Apr-2012','OUT', NULL ,76 ,NULL
;WITH remaining AS
(
SELECT *,
CASE
WHEN trantype = 'IN' THEN 1
ELSE -1
END * qty AS stock_shift,
ROW_NUMBER() OVER(PARTITION BY item ORDER BY transdate) AS row,
CASE
WHEN trantype = 'OUT' THEN NULL
ELSE ROW_NUMBER()OVER(PARTITION BY item, CASE WHEN trantype = 'IN' THEN 0 ELSE 1 END ORDER BY transdate)
END AS in_row,
SUM(CASE WHEN trantype = 'OUT' THEN qty END) OVER(PARTITION BY item) AS total_out
FROM #sample
)
,remaining2 AS
(
SELECT r1.item,
r1.stockid,
MAX(r1.transdate) AS transdate,
MAX(r1.trantype) AS trantype,
MAX(r1.batchno) AS batchno,
MAX(r1.qty) AS qty,
MAX(r1.price) AS price,
MAX(r1.total_out) AS total_out,
MAX(r1.in_row) AS in_row,
CASE
WHEN MAX(r1.trantype) = 'OUT' THEN NULL
WHEN SUM(CASE WHEN r1.trantype = 'IN' THEN r2.qty ELSE 0 END) - MAX(r1.total_out) < 0 THEN SUM(CASE WHEN r1.trantype = 'IN' THEN r2.qty ELSE 0 END)
- MAX(r1.total_out)
ELSE 0
END AS running_in
FROM remaining r1
LEFT OUTER JOIN remaining r2
ON r2.row <= r1.row
AND r2.item = r1.item
GROUP BY
r1.item,
r1.stockid
)
SELECT r2.item,
r2.stockid,
MAX(r2.transdate) AS transdate,
MAX(r2.trantype) AS trantype,
MAX(r2.batchno) AS batchno,
MAX(r2.qty) AS qty,
MAX(r2.price) AS price,
MAX(CASE WHEN r2.trantype = 'OUT' THEN NULL ELSE ISNULL(r2.qty + r3.running_in, 0) END) AS remaining_stock
FROM remaining2 r2
LEFT OUTER JOIN remaining2 r3
ON r2.in_row - 1 = r3.in_row
AND r2.item = r3.item
GROUP BY
r2.item,
r2.stockid
This sql is having a problem and the result is attached here The records for which the value are not matching are indicated in yellow color. Kindly help to solve the problem.
I think this should do the trick?
SELECT 10001 as stockid,'ABC' as item,'01-Apr-2012' as transdate,'IN' as trantype, 71001000 as batchno, 200 as qty, 750.0 as price INTO #sample
UNION ALL SELECT 10002 ,'ABC','02-Apr-2012','OUT', NULL ,100,NULL
UNION ALL SELECT 10003 ,'ABC','03-Apr-2012','IN', 71001001, 50 , 700.0
UNION ALL SELECT 10004 ,'ABC','04-Apr-2012','IN', 71001002, 75 , 800.0
UNION ALL SELECT 10005 ,'ABC','10-Apr-2012','OUT', NULL ,125,NULL
UNION ALL SELECT 10006 ,'XYZ','05-Apr-2012','IN', 71001003, 150 , 350.0
UNION ALL SELECT 10007 ,'XYZ','05-Apr-2012','OUT', NULL , 120 ,NULL
UNION ALL SELECT 10008 ,'XYZ','15-Apr-2012','OUT', NULL , 10 ,NULL
UNION ALL SELECT 10009 ,'XYZ','20-Apr-2012','IN', 71001004, 90 , 340.0
UNION ALL SELECT 10010 ,'PQR','06-Apr-2012','IN', 71001005, 50 , 510.0
UNION ALL SELECT 10011 ,'PQR','15-Apr-2012','IN', 71001006, 60 , 505.0
UNION ALL SELECT 10012 ,'MNO','01-Apr-2012','IN', 71001007, 76 , 410.0
UNION ALL SELECT 10013,'MNO','11-Apr-2012','OUT', NULL ,76 ,NULL
;with remaining_stock as
(
SELECT *
,CASE WHEN trantype = 'IN' THEN 1 ELSE -1 END * qty AS stock_shift
,row_number() OVER (PARTITION BY item ORDER BY transdate) as row
,CASE WHEN trantype = 'OUT' THEN NULL ELSE
row_number()OVER (PARTITION BY item,CASE WHEN trantype = 'IN' THEN 0 ELSE 1 END ORDER BY transdate) END as in_row
,CASE WHEN trantype = 'IN' THEN NULL ELSE
row_number()OVER (PARTITION BY item,CASE WHEN trantype = 'OUT' THEN 0 ELSE 1 END ORDER BY transdate) END as out_row
,ISNULL(SUM(CASE WHEN trantype = 'OUT' THEN qty END) OVER (PARTITION BY item),0) AS total_out
,ISNULL(SUM(CASE WHEN trantype = 'IN' THEN qty END) OVER (PARTITION BY item),0) AS total_in
FROM #sample
)
,remaining_stock2 AS
(
SELECT
r1.item
,r1.stockid
,MAX(r1.transdate) as transdate
,MAX(r1.trantype) as trantype
,MAX(r1.batchno) as batchno
,MAX(r1.qty) as qty
,MAX(r1.price) as price
,MAX(r1.total_in) as total_in
,MAX(r1.total_out) as total_out
,SUM(r2.qty) as running_in
FROM remaining_stock r1
LEFT OUTER JOIN remaining_stock r2 on r2.in_row <= r1.in_row
AND r2.item = r1.item
GROUP BY
r1.item
,r1.stockid
)
SELECT
item
,stockid
,transdate
,trantype
,batchno
,qty
,price
,CASE WHEN trantype = 'OUT' THEN NULL
WHEN total_out >= running_in THEN 0
WHEN (running_in - total_out) < qty THEN (running_in - total_out)
WHEN (running_in - total_out) >= qty THEN qty
END as remaining_stocks
FROM remaining_stock2
Your question isn't very clear to me on how the FIFO logic is to be applied. I'm going to assume that you want to associate each IN record against the next OUT record if one exists. To achieve this you need to join the table on itself like the following
select
t1.BatchNo,
isnull(t1.Qty,0) as 'IN Qty',
isnull(t2.Qty,0) as 'OUT Qty',
isnull(t1.Qty,0) - isnull(t2.Qty,0) as 'Remaining Qty'
from
tbl_test t1
left join tbl_test t2
on t2.StockID = (t1.StockID + 1)
and t2.TranType = 'OUT'
where
t1.TranType = 'IN'
The results will show you the following for the first 5 records for ABC from your question.
BatchNo | IN Qty | OUT Qty | Remaining Qty
71001000 | 200 | 100 | 100
71001001 | 50 | 0 | 50
71001002 | 75 | 125 | -50
The left join works on the assumption that the StockID for each IN record is always one less number than the associated OUT record. I personally think your data model needs improving.
OUT records should have a BatchNo assigned or a reference to the
StockID of the associated IN record
add a timestamp field for sequential ordering
add a DateTime field for handling IN/OUT occuring on same day
SQL Server 2008
Hi
I have an issue where i have two of the same accounts which i would like to merge together, the list looks like below:
AcctID AcctType AcctSubType Curr TransType Amount
1 CCY SET EUR Opening 1000
1 CCY SET EUR BUY -100
1 CCY SET EUR SEL 100
1 CCY SET EUR Closing 1000
2 CCY SET EUR Opening 2000
2 CCY SET EUR SEL 100
2 CCY SET EUR Closing 2100
3 CCY INC EUR Opening 1000
3 CCY INC EUR SEL 200
3 CCY INC EUR BUY -100
3 CCY INC EUR Closing 1100
So basically i would like to merge it so it looks like this:
AcctID AcctType AcctSubType Curr TransType Amount
1 CCY SET EUR Opening 3000
1 CCY SET EUR BUY -100
1 CCY SET EUR SEL 100
2 CCY SET EUR SEL 100
1 CCY SET EUR Closing 3100
3 CCY INC EUR Opening 1000
3 CCY INC EUR SEL 200
3 CCY INC EUR BUY -100
3 CCY INC EUR Closing 1100
However i can't think of the best way to code this in SQL in my stored proc. I can only really think of a merge or a union, but i only want it to merge where there are two capital accounts, a capital account is signified by the 'CCY' AcctType and AcctSubType 'SET'.
A point in the right direction would be much appreciated.
Thanks
EDIT: Actual stored proc
CREATE TABLE #Workbook
(ID INT
,PortfolioID VARCHAR(20)
,PortfolioName VARCHAR(255)
,InstrumentID VARCHAR(20)
, IssueID VARCHAR(50)
, CashAccountInstrumentID VARCHAR(20)
, CashAccountName VARCHAR(255)
, CashAccountType CHAR(3)
, CashAccountSubType CHAR(3)
, TransactionClass VARCHAR(10)
, TransactionType VARCHAR(20)
, EffPostDate DATETIME
, TradeDate DATETIME
, SettleDate DATETIME
, CcySettle VARCHAR(3)
, DateItem DATETIME
, RunningTotalDate DATETIME
, Detail VARCHAR(300)
, ProceedsLocal FLOAT
, Total FLOAT
, RunningTotal FLOAT
, ReconValue FLOAT
, ReconNotes VARCHAR(50)
, RecordType VARCHAR(1)
, Sequence INT
, RecordNum INT
, TransactionID VARCHAR(20)
)
INSERT INTO #Workbook
EXEC dbo.usp_Generic_ReconCashAccount_NEW '2010-10-01', '2010-10- 07', '', 'OOGENHF', 'SS','','','','',''
DELETE FROM #Workbook
WHERE TransactionType = 'BBA'
OR (ProceedsLocal = 0 AND RecordType = 'T')
;;with needed as
(
select * from #Workbook w
WHERE w.CashAccountType = 'CCY'
AND w.CashAccountSubType = 'SET'
AND w.TransactionType In ('Opening','Closing')
AND w.CcySettle = w.CcySettle
)
select
min(ID)
, PortfolioID
, PortfolioName
, InstrumentID
, IssueID
, min(CashAccountInstrumentID) as CashAccountInstrumentID
, min(CashAccountName) as CashAccountName
, CashAccountType
, CashAccountSubType
, TransactionClass
, TransactionType
, EffPostDate
, TradeDate
, SettleDate
, CcySettle
, DateItem
, RunningTotalDate
, Detail
, sum(ProceedsLocal) as ProceedsLocal
, sum(Total) as Total
, sum(RunningTotal) as RunningTotal
, sum(ReconValue) as ReconValue
, ReconNotes
, RecordType
, Sequence
, RecordNum
, TransactionID
from needed
group by ID,PortfolioID,PortfolioName,InstrumentID,IssueID,CashAccountInstrumentID,CashAccountName,CashAccountType,CashAccountSubType,TransactionClass,TransactionType,EffPostDate,TradeDate,SettleDate
,CcySettle, DateItem,RunningTotalDate,Detail,ProceedsLocal,Total,RunningTotal,ReconValue,ReconNotes,RecordType,Sequence,RecordNum,TransactionID
UNION ALL
(
select * from #Workbook
except
select * from needed
)
drop table #Workbook
How about this:
;with test (AcctID, AcctType, AcctSubType, Curr, TransType, Amount)
as
(
select 1, 'CCY', 'SET', 'EUR', 'Opening', 1000
union all
select 1, 'CCY', 'SET', 'EUR', 'BUY', -100
union all
select 1, 'CCY', 'SET', 'EUR', 'SEL', 100
union all
select 1, 'CCY', 'SET', 'EUR', 'Closing', 1000
union all
select 2, 'CCY', 'SET', 'EUR', 'Opening', 2000
union all
select 2, 'CCY', 'SET', 'EUR', 'SEL', 100
union all
select 2, 'CCY', 'SET', 'EUR', 'Closing', 2100
union all
select 3, 'CCY', 'INC', 'EUR', 'Opening', 1000
union all
select 3, 'CCY', 'INC', 'EUR', 'SEL', 200
union all
select 3, 'CCY', 'INC', 'EUR', 'BUY', -100
union all
select 3, 'CCY', 'INC', 'EUR', 'Closing', 1100
union all
select 4, 'CCY', 'SET', 'SEK', 'Opening', 2000
union all
select 4, 'CCY', 'SET', 'SEK', 'SEL', 100
union all
select 4, 'CCY', 'SET', 'SEK', 'Closing', 2100
)
, needed as
(
select *
from test
where AcctType = 'CCY'
and AcctSubType = 'SET'
and TransType in ('Opening','Closing')
)
select min(AcctID) as AcctID
,AcctType
,AcctSubType
,Curr
,TransType
,sum(Amount) as Amount
from needed
group by
AcctType
,AcctSubType
,Curr
,TransType
union all
(
select *
from test
except
select *
from needed
)
EDIT: Updated to support multiple currencys.
The only change is to wrap the final SELECT - EXCEPT in parantheses.