I have defined a .dir-locals.el file with the following content:
((python-mode . ((cr/virtualenv-name . "saas"))))
In my .emacs I have the following function to retrieve this value and provide a virtualenv path:
(defun cr/virtualenv ()
(cond (cr/virtualenv-name (format "%s/%s" virtualenv-base cr/virtualenv-name))
((getenv "EMACS_VIRTUAL_ENV") (getenv "EMACS_VIRTUAL_ENV"))
(t "~/.emacs.d/python")))
Finally, in my python-mode-hook list, I have this hook function:
(add-hook 'python-mode-hook 'cr/python-mode-shell-setup)
(defun cr/python-mode-shell-setup ()
(message "virtualenv-name is %s" cr/virtualenv-name)
(let ((python-base (cr/virtualenv)))
(cond ((and (fboundp 'ipython-shell-hook) (file-executable-p (concat python-base "/bin/ipython")))
(setq python-python-command (concat python-base "/bin/ipython"))
(setq py-python-command (concat python-base "/bin/ipython"))
(setq py-python-command-args '( "-colors" "NoColor")))
(t
(setq python-python-command (concat python-base "/bin/python"))
(setq py-python-command (concat python-base "/bin/python"))
(setq py-python-command-args nil)))))
When I open a new python file, the message logged by cr/python-mode-shell-setup indicates that cr/virtualenv-name is nil. However, when I C-h v the name, I get "saas" instead.
Obviously there's a load order issue here; is there a way to have my mode hook statements respond to directory-local variables?
This happens because normal-mode calls (set-auto-mode) and (hack-local-variables) in that order.
However hack-local-variables-hook is run after the local variables have been processed, which enables some solutions:
The first is to make Emacs run a new "local variables hook" for each major mode:
(add-hook 'hack-local-variables-hook 'run-local-vars-mode-hook)
(defun run-local-vars-mode-hook ()
"Run a hook for the major-mode after the local variables have been processed."
(run-hooks (intern (concat (symbol-name major-mode) "-local-vars-hook"))))
(add-hook 'python-mode-local-vars-hook 'cr/python-mode-shell-setup)
(Your original function can be used unmodified, with that approach.)
A second option is to utilise the optional LOCAL argument to add-hook that makes the specified function buffer-local. With this approach you could write your hook as follows:
(add-hook 'python-mode-hook 'cr/python-mode-shell-setup)
(defun cr/python-mode-shell-setup ()
(add-hook 'hack-local-variables-hook
(lambda () (message "virtualenv-name is %s" cr/virtualenv-name)
(let ((python-base (cr/virtualenv)))
(cond ((and (fboundp 'ipython-shell-hook) (file-executable-p (concat python-base "/bin/ipython")))
(setq python-python-command (concat python-base "/bin/ipython"))
(setq py-python-command (concat python-base "/bin/ipython"))
(setq py-python-command-args '( "-colors" "NoColor")))
(t
(setq python-python-command (concat python-base "/bin/python"))
(setq py-python-command (concat python-base "/bin/python"))
(setq py-python-command-args nil)))))
nil t)) ; buffer-local hack-local-variables-hook
i.e. python-mode-hook runs first and registers the anonymous function with hack-local-variables-hook for the current buffer only; and that function is then called after the local variables have been processed.
Lindydancer's comment prompts a third approach. It's not nearly as clean as the other two, but proved interesting regardless. I didn't like the idea of causing (hack-local-variables) to be called twice, but I see that if you set the local-enable-local-variables buffer-locally, it prevents (hack-local-variables) from doing anything, so you could do this:
(defun cr/python-mode-shell-setup ()
(report-errors "File local-variables error: %s"
(hack-local-variables)))
(set (make-local-variable 'local-enable-local-variables) nil)
(let ((python-base (cr/virtualenv)))
...))
Obviously that modifies the normal sequence of execution a little, so side effects may be possible. I was worried that if the same major mode is set by a local variable comment in the file, this might cause infinite recursion, but that doesn't actually appear to be a problem.
Local variable header comments (e.g. -*- mode: foo -*-) are handled by (set-auto-mode), so those are fine; but a mode: foo Local Variables: comment seems like it would be an issue as it is handled by (hack-local-variables), and so if the mode is set that way I thought it would cause recursion.
In practice I was able to trigger the problem by using a simple function as a 'mode' which did nothing more than try to run its hooks; however testing with a 'proper' mode did not exhibit the problem, so it's probably safe in reality. I didn't look into this further (as the other two solutions are much cleaner than this), but I would guess the delayed mode hooks mechanism probably explains it?
I am using org-mode and org-attach extensively which means that
there can be many attachment directories associated with one org file.
On worg I found a function from Matt Lundi which allows to see all
attachments that belong to the whole file and browse them with ido.
I would like to restrict this function to a subtree which would make it
much more useful for my use case.
Since I am not new to emacs but almost completely elisp illiterate I am
asking here.
This is the function:
(defun my-ido-find-org-attach ()
"Find files in org-attachment directory"
(interactive)
(let* ((enable-recursive-minibuffers t)
(files (find-lisp-find-files org-attach-directory "."))
(file-assoc-list
(mapcar (lambda (x)
(cons (file-name-nondirectory x)
x))
files))
(filename-list
(remove-duplicates (mapcar #'car file-assoc-list)
:test #'string=))
(filename (ido-completing-read "Org attachments: " filename-list nil t))
(longname (cdr (assoc filename file-assoc-list))))
(ido-set-current-directory
(if (file-directory-p longname)
longname
(file-name-directory longname)))
(setq ido-exit 'refresh
ido-text-init ido-text
ido-rotate-temp t)
(exit-minibuffer)))
Maybe I'm missing something, but calling org-narrow-to-subtree first should do what you want (call widen afterwards to revert that).
I thought this would be pretty darned useful myself so, inspired by your question, I wrote a version that does what you want plus a couple other bells and whistles. To invoke it you have to type C-c o. NOTE: This is NOT on the usual org-attach key prefix because that function is oddly written without a keymap so it is difficult to add the functionality onto the key prefix.
(autoload 'org-attach-dir "org-attach")
(autoload 'find-lisp-find-files "find-lisp")
(defcustom ido-locate-org-attach-all-files nil
"Non-nil means `ido-locate-org-attach' returns all files.
Otherwise the default behavior only returns files attached to the
current entry."
:group 'ido
:type 'boolean)
(defun ido-locate-org-attach (&optional find-all)
"Find files in org-attachment directory for current entry.
When called with a prefix argument, include all files in
`org-attach-directory'. With a double `C-u' prefix arg the value
of `ido-locate-org-attach-all-files' will be toggled for the
session. If you want to save it permanently for future session
then customize the variable `ido-locate-org-attach-all-files'."
(interactive "P")
(when (org-attach-dir nil)
(when (equal find-all '(16))
(setq ido-locate-org-attach-all-files
(not ido-locate-org-attach-all-files)))
(let* ((enable-recursive-minibuffers t)
(dir (if (org-xor ido-locate-org-attach-all-files
(equal find-all '(4)))
org-attach-directory
(org-attach-dir nil)))
(files (find-lisp-find-files dir "."))
(file-assoc-list
(mapcar (lambda (x)
(cons (file-name-nondirectory x)
x))
files))
(filename-list
(remove-duplicates (mapcar #'car file-assoc-list)
:test #'string=))
(filename (ido-completing-read "Org attachments: " filename-list nil t))
(longname (cdr (assoc filename file-assoc-list))))
(ido-set-current-directory
(if (file-directory-p longname)
longname
(file-name-directory longname)))
(setq ido-exit 'refresh
ido-text-init ido-text
ido-rotate-temp t)
(exit-minibuffer))))
;; Run ido-locate-org-attach when using org-open-at-point (C-c C-o) in
;; the current entry (except if you're on the header line itself it
;; will use the default behavior to open/close the entry.
(add-hook 'org-open-at-point-functions 'ido-locate-org-attach)
;; C-c o will locate files for the current entry
;; C-u C-c o will locate files for the whole file
;; C-u C-u C-c o will toggle the default current entry / whole file
(define-key org-mode-map "\C-co" 'ido-locate-org-attach)
I'll look into submitting this to be an official part of org-attach.el.
As an aside, the '(4) and '(16) are magic numbers that mean prefix arg once C-u and prefix arg twice C-u C-u before the key sequence that invoked the command interactively.
When I use grep-find it opens another window (area in the frame) with a list of results that I can select. When I select one it opens the target file in a different window than grep-find is in.
How can I get the target file to open in the same window as the grep results (replacing the grep results window with what I am actually looking for).
How can I keep grep-find from opening a separate window (have it so it opens in the current window). My goal is I look for something, I find it, I go to it, all within the same window. I would like to add this to my .emacs file.
It doesn't look like there is any way to configure the compile package to do what you're asking. And there's no easy way to use advice to tweak the behavior. I think you have to resort to editing the function which actually jumps to the error, which you can do with the following addition to your .emacs (tested in Emacs 23.1):
(eval-after-load "compile"
'(defun compilation-goto-locus (msg mk end-mk)
"Jump to an error corresponding to MSG at MK.
All arguments are markers. If END-MK is non-nil, mark is set there
and overlay is highlighted between MK and END-MK."
;; Show compilation buffer in other window, scrolled to this error.
(let* ((from-compilation-buffer (eq (window-buffer (selected-window))
(marker-buffer msg)))
;; Use an existing window if it is in a visible frame.
(pre-existing (get-buffer-window (marker-buffer msg) 0))
(w (if (and from-compilation-buffer pre-existing)
;; Calling display-buffer here may end up (partly) hiding
;; the error location if the two buffers are in two
;; different frames. So don't do it if it's not necessary.
pre-existing
(let ((display-buffer-reuse-frames t)
(pop-up-windows t))
;; Pop up a window.
(display-buffer (marker-buffer msg)))))
(highlight-regexp (with-current-buffer (marker-buffer msg)
;; also do this while we change buffer
(compilation-set-window w msg)
compilation-highlight-regexp)))
;; Ideally, the window-size should be passed to `display-buffer' (via
;; something like special-display-buffer) so it's only used when
;; creating a new window.
(unless pre-existing (compilation-set-window-height w))
(switch-to-buffer (marker-buffer mk))
;; was
;; (if from-compilation-buffer
;; ;; If the compilation buffer window was selected,
;; ;; keep the compilation buffer in this window;
;; ;; display the source in another window.
;; (let ((pop-up-windows t))
;; (pop-to-buffer (marker-buffer mk) 'other-window))
;; (if (window-dedicated-p (selected-window))
;; (pop-to-buffer (marker-buffer mk))
;; (switch-to-buffer (marker-buffer mk))))
;; If narrowing gets in the way of going to the right place, widen.
(unless (eq (goto-char mk) (point))
(widen)
(goto-char mk))
(if end-mk
(push-mark end-mk t)
(if mark-active (setq mark-active)))
;; If hideshow got in the way of
;; seeing the right place, open permanently.
(dolist (ov (overlays-at (point)))
(when (eq 'hs (overlay-get ov 'invisible))
(delete-overlay ov)
(goto-char mk)))
(when highlight-regexp
(if (timerp next-error-highlight-timer)
(cancel-timer next-error-highlight-timer))
(unless compilation-highlight-overlay
(setq compilation-highlight-overlay
(make-overlay (point-min) (point-min)))
(overlay-put compilation-highlight-overlay 'face 'next-error))
(with-current-buffer (marker-buffer mk)
(save-excursion
(if end-mk (goto-char end-mk) (end-of-line))
(let ((end (point)))
(if mk (goto-char mk) (beginning-of-line))
(if (and (stringp highlight-regexp)
(re-search-forward highlight-regexp end t))
(progn
(goto-char (match-beginning 0))
(move-overlay compilation-highlight-overlay
(match-beginning 0) (match-end 0)
(current-buffer)))
(move-overlay compilation-highlight-overlay
(point) end (current-buffer)))
(if (or (eq next-error-highlight t)
(numberp next-error-highlight))
;; We want highlighting: delete overlay on next input.
(add-hook 'pre-command-hook
'compilation-goto-locus-delete-o)
;; We don't want highlighting: delete overlay now.
(delete-overlay compilation-highlight-overlay))
;; We want highlighting for a limited time:
;; set up a timer to delete it.
(when (numberp next-error-highlight)
(setq next-error-highlight-timer
(run-at-time next-error-highlight nil
'compilation-goto-locus-delete-o)))))))
(when (and (eq next-error-highlight 'fringe-arrow))
;; We want a fringe arrow (instead of highlighting).
(setq next-error-overlay-arrow-position
(copy-marker (line-beginning-position)))))))
The eval-afer-load portion just ensures that you re-define it after Emacs defined it, so that your change takes hold.
You can add a binding (e.g. Alt-m) and do the following
(define-key grep-mode-map "\M-m" (lambda()
(interactive)
(compile-goto-error)
(delete-other-windows)
(kill-buffer "*grep*")))
I didn't find a way to replace the standard "Enter" / Mouse-click binding with a custom function
There is an another approach:
(defun eab/compile-goto-error ()
(interactive)
(let ((cwc (current-window-configuration)))
(funcall
`(lambda ()
(defun eab/compile-goto-error-internal ()
(let ((cb (current-buffer))
(p (point)))
(set-window-configuration ,cwc)
(switch-to-buffer cb)
(goto-char p ))))))
(compile-goto-error)
(run-with-timer 0.01 nil 'eab/compile-goto-error-internal))
I had the same question, and found this answer over at emacs.stackexchange https://emacs.stackexchange.com/a/33908/20000
(defun my-compile-goto-error-same-window ()
(interactive)
(let ((display-buffer-overriding-action
'((display-buffer-reuse-window
display-buffer-same-window)
(inhibit-same-window . nil))))
(call-interactively #'compile-goto-error)))
(defun my-compilation-mode-hook ()
(local-set-key (kbd "o") #'my-compile-goto-error-same-window))
(add-hook 'compilation-mode-hook #'my-compilation-mode-hook)
Pressing o in the *grep* buffer will open the location and file in the same frame.
I found this an elegant solution without deleting frames or too much lisp code and just hooking into compilation-mode-hook.
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
I've switched computers a few times recently, and somewhere along the way I lost my .emacs. I'm trying to build it up again, but while I'm at it, I thought I'd pick up other good configurations that other people use.
So, if you use Emacs, what's in your .emacs?
Mine is pretty barren right now, containing only:
Global font-lock-mode! (global-font-lock-mode 1)
My personal preferences with respect to indentation, tabs, and spaces.
Use cperl-mode instead of perl-mode.
A shortcut for compilation.
What do you think is useful?
Use the ultimate dotfiles site. Add your '.emacs' here. Read the '.emacs' of others.
My favorite snippet. The ultimate in Emacs eye candy:
;; real lisp hackers use the lambda character
;; courtesy of stefan monnier on c.l.l
(defun sm-lambda-mode-hook ()
(font-lock-add-keywords
nil `(("\\<lambda\\>"
(0 (progn (compose-region (match-beginning 0) (match-end 0)
,(make-char 'greek-iso8859-7 107))
nil))))))
(add-hook 'emacs-lisp-mode-hook 'sm-lambda-mode-hook)
(add-hook 'lisp-interactive-mode-hook 'sm-lamba-mode-hook)
(add-hook 'scheme-mode-hook 'sm-lambda-mode-hook)
So you see i.e. the following when editing lisp/scheme:
(global-set-key "^Cr" '(λ () (interactive) (revert-buffer t t nil)))
I have this to change yes or no prompt to y or n prompts:
(fset 'yes-or-no-p 'y-or-n-p)
I have these to start Emacs without so much "fanfare" which I got from this question.
(setq inhibit-startup-echo-area-message t)
(setq inhibit-startup-message t)
And Steve Yegge's function to rename a file that you're editing along with its corresponding buffer:
(defun rename-file-and-buffer (new-name)
"Renames both current buffer and file it's visiting to NEW-NAME."
(interactive "sNew name: ")
(let ((name (buffer-name))
(filename (buffer-file-name)))
(if (not filename)
(message "Buffer '%s' is not visiting a file!" name)
(if (get-buffer new-name)
(message "A buffer named '%s' already exists!" new-name)
(progn
(rename-file name new-name 1)
(rename-buffer new-name)
(set-visited-file-name new-name)
(set-buffer-modified-p nil))))))
One thing that can prove very useful: Before it gets too big, try to split it into multiple files for various tasks: My .emacs just sets my load-path and the loads a bunch of files - I've got all my mode-specific settings in mode-configs.el, keybindings in keys.el, et cetera
My .emacs is only 127 lines, here are the most useful little snippets:
;; keep backup files neatly out of the way in .~/
(setq backup-directory-alist '(("." . ".~")))
This makes the *~ files which I find clutter up the directory go into a special directory, in this case .~
;; uniquify changes conflicting buffer names from file<2> etc
(require 'uniquify)
(setq uniquify-buffer-name-style 'reverse)
(setq uniquify-separator "/")
(setq uniquify-after-kill-buffer-p t) ; rename after killing uniquified
(setq uniquify-ignore-buffers-re "^\\*") ; don't muck with special buffers
This sets up uniquify which changes those ugly file<2> etc. buffer names you get when multiple files have the same name into a much neater unambiguous name using as much of the whole path of the file as it has to.
That's about it... the rest is pretty standard stuff that I'm sure everyone knows about.
This is not the whole kit and kaboodle, but it is some of the more useful snippets I've gathered:
(defadvice show-paren-function (after show-matching-paren-offscreen
activate)
"If the matching paren is offscreen, show the matching line in the
echo area. Has no effect if the character before point is not of
the syntax class ')'."
(interactive)
(let ((matching-text nil))
;; Only call `blink-matching-open' if the character before point
;; is a close parentheses type character. Otherwise, there's not
;; really any point, and `blink-matching-open' would just echo
;; "Mismatched parentheses", which gets really annoying.
(if (char-equal (char-syntax (char-before (point))) ?\))
(setq matching-text (blink-matching-open)))
(if (not (null matching-text))
(message matching-text))))
;;;;;;;;;;;;;;;
;; UTF-8
;;;;;;;;;;;;;;;;;;;;
;; set up unicode
(prefer-coding-system 'utf-8)
(set-default-coding-systems 'utf-8)
(set-terminal-coding-system 'utf-8)
(set-keyboard-coding-system 'utf-8)
;; This from a japanese individual. I hope it works.
(setq default-buffer-file-coding-system 'utf-8)
;; From Emacs wiki
(setq x-select-request-type '(UTF8_STRING COMPOUND_TEXT TEXT STRING))
;; Wwindows clipboard is UTF-16LE
(set-clipboard-coding-system 'utf-16le-dos)
(defun jonnay-timestamp ()
"Spit out the current time"
(interactive)
(insert (format-time-string "%Y-%m-%d")))
(defun jonnay-sign ()
"spit out my name, email and the current time"
(interactive)
(insert "-- Jonathan Arkell (jonathana#criticalmass.com)")
(jonnay-timestamp))
;; Cygwin requires some seriosu setting up to work the way i likes it
(message "Setting up Cygwin...")
(let* ((cygwin-root "c:")
(cygwin-bin (concat cygwin-root "/bin"))
(gambit-bin "/usr/local/Gambit-C/4.0b22/bin/")
(snow-bin "/usr/local/snow/current/bin")
(mysql-bin "/wamp/bin/mysql/mysql5.0.51a/bin/"))
(setenv "PATH" (concat cygwin-bin ";" ;
snow-bin ";"
gambit-bin ";"
mysql-bin ";"
".;")
(getenv "PATH"))
(setq exec-path (cons cygwin-bin exec-path)))
(setq shell-file-name "bash")
(setq explicit-shell-file-name "bash")
(require 'cygwin-mount)
(cygwin-mount-activate)
(message "Setting up Cygwin...Done")
; Completion isn't perfect, but close
(defun my-shell-setup ()
"For Cygwin bash under Emacs 20+"
(setq comint-scroll-show-maximum-output 'this)
(setq comint-completion-addsuffix t)
(setq comint-eol-on-send t)
(setq w32-quote-process-args ?\")
(make-variable-buffer-local 'comint-completion-addsuffix))
(setq shell-mode-hook 'my-shell-setup)
(add-hook 'emacs-startup-hook 'cygwin-shell)
; Change how home key works
(global-set-key [home] 'beginning-or-indentation)
(substitute-key-definition 'beginning-of-line 'beginning-or-indentation global-map)
(defun yank-and-down ()
"Yank the text and go down a line."
(interactive)
(yank)
(exchange-point-and-mark)
(next-line))
(defun kill-syntax (&optional arg)
"Kill ARG sets of syntax characters after point."
(interactive "p")
(let ((arg (or arg 1))
(inc (if (and arg (< arg 0)) 1 -1))
(opoint (point)))
(while (not (= arg 0))
(if (> arg 0)
(skip-syntax-forward (string (char-syntax (char-after))))
(skip-syntax-backward (string (char-syntax (char-before)))))
(setq arg (+ arg inc)))
(kill-region opoint (point))))
(defun kill-syntax-backward (&optional arg)
"Kill ARG sets of syntax characters preceding point."
(interactive "p")
(kill-syntax (- 0 (or arg 1))))
(global-set-key [(control shift y)] 'yank-and-down)
(global-set-key [(shift backspace)] 'kill-syntax-backward)
(global-set-key [(shift delete)] 'kill-syntax)
(defun insert-file-name (arg filename)
"Insert name of file FILENAME into buffer after point.
Set mark after the inserted text.
Prefixed with \\[universal-argument], expand the file name to
its fully canocalized path.
See `expand-file-name'."
;; Based on insert-file in Emacs -- ashawley 2008-09-26
(interactive "*P\nfInsert file name: ")
(if arg
(insert (expand-file-name filename))
(insert filename)))
(defun kill-ring-save-filename ()
"Copy the current filename to the kill ring"
(interactive)
(kill-new (buffer-file-name)))
(defun insert-file-name ()
"Insert the name of the current file."
(interactive)
(insert (buffer-file-name)))
(defun insert-directory-name ()
"Insert the name of the current directory"
(interactive)
(insert (file-name-directory (buffer-file-name))))
(defun jonnay-toggle-debug ()
"Toggle debugging by toggling icicles, and debug on error"
(interactive)
(toggle-debug-on-error)
(icicle-mode))
(defvar programming-modes
'(emacs-lisp-mode scheme-mode lisp-mode c-mode c++-mode
objc-mode latex-mode plain-tex-mode java-mode
php-mode css-mode js2-mode nxml-mode nxhtml-mode)
"List of modes related to programming")
; Text-mate style indenting
(defadvice yank (after indent-region activate)
(if (member major-mode programming-modes)
(indent-region (region-beginning) (region-end) nil)))
I have a lot of others that have already been mentioned, but these are absolutely necessary in my opinion:
(transient-mark-mode 1) ; makes the region visible
(line-number-mode 1) ; makes the line number show up
(column-number-mode 1) ; makes the column number show up
You can look here: http://www.dotemacs.de/
And my .emacs is pretty long to put it here as well, so it will make the answer not too readable. Anyway, if you wish I can sent it to you.
Also I would recomend you to read this: http://steve.yegge.googlepages.com/my-dot-emacs-file
Here are some key mappings that I've become dependent upon:
(global-set-key [(control \,)] 'goto-line)
(global-set-key [(control \.)] 'call-last-kbd-macro)
(global-set-key [(control tab)] 'indent-region)
(global-set-key [(control j)] 'join-line)
(global-set-key [f1] 'man)
(global-set-key [f2] 'igrep-find)
(global-set-key [f3] 'isearch-forward)
(global-set-key [f4] 'next-error)
(global-set-key [f5] 'gdb)
(global-set-key [f6] 'compile)
(global-set-key [f7] 'recompile)
(global-set-key [f8] 'shell)
(global-set-key [f9] 'find-next-matching-tag)
(global-set-key [f11] 'list-buffers)
(global-set-key [f12] 'shell)
Some other miscellaneous stuff, mostly for C++ development:
;; Use C++ mode for .h files (instead of plain-old C mode)
(setq auto-mode-alist (cons '("\\.h$" . c++-mode) auto-mode-alist))
;; Use python-mode for SCons files
(setq auto-mode-alist (cons '("SConstruct" . python-mode) auto-mode-alist))
(setq auto-mode-alist (cons '("SConscript" . python-mode) auto-mode-alist))
;; Parse CppUnit failure reports in compilation-mode
(require 'compile)
(setq compilation-error-regexp-alist
(cons '("\\(!!!FAILURES!!!\nTest Results:\nRun:[^\n]*\n\n\n\\)?\\([0-9]+\\)) test: \\([^(]+\\)(F) line: \\([0-9]+\\) \\([^ \n]+\\)" 5 4)
compilation-error-regexp-alist))
;; Enable cmake-mode from http://www.cmake.org/Wiki/CMake_Emacs_mode_patch_for_comment_formatting
(require 'cmake-mode)
(setq auto-mode-alist
(append '(("CMakeLists\\.txt\\'" . cmake-mode)
("\\.cmake\\'" . cmake-mode))
auto-mode-alist))
;; "M-x reload-buffer" will revert-buffer without requiring confirmation
(defun reload-buffer ()
"revert-buffer without confirmation"
(interactive)
(revert-buffer t t))
To refresh the webpage you're editing from within Emacs
(defun moz-connect()
(interactive)
(make-comint "moz-buffer" (cons "127.0.0.1" "4242"))
(global-set-key "\C-x\C-g" '(lambda ()
(interactive)
(save-buffer)
(comint-send-string "*moz-buffer*" "this.BrowserReload()\n"))))
Used in combination with http://hyperstruct.net/projects/mozlab
You can find my configuration (both in html & in tar'ed archive) on my site. It contains lot of settings for different modes
This block is the most important for me:
(setq locale-coding-system 'utf-8)
(set-terminal-coding-system 'utf-8)
(set-keyboard-coding-system 'utf-8)
(set-selection-coding-system 'utf-8)
(prefer-coding-system 'utf-8)
I've never been clear on the difference between those, though. Cargo cult, I guess...
I try to keep my .emacs organized. The configuration will always be a work in progress, but I'm starting to be satisfied with the overall structure.
All stuff is under ~/.elisp, a directory that is under version control (I use git, if that's of interest). ~/.emacs simply points to ~/.elisp/dotemacs which itself just loads ~/.elisp/cfg/init. That file in turn imports various configuration files via require. This means that the configuration files need to behave like modes: they import stuff they depend on and they provide themselves at the end of the file, e.g. (provide 'my-ibuffer-cfg). I prefix all identifiers that are defined in my configuration with my-.
I organize the configuration in respect to modes/subjects/tasks, not by their technical implications, e.g. I don't have a separate config file in which all keybindings or faces are defined.
My init.el defines the following hook to make sure that Emacs recompiles configuration files whenever saved (compiled Elisp loads a lot faster but I don't want to do this step manually):
;; byte compile config file if changed
(add-hook 'after-save-hook
'(lambda ()
(when (string-match
(concat (expand-file-name "~/.elisp/cfg/") ".*\.el$")
buffer-file-name)
(byte-compile-file buffer-file-name))))
This is the directory structure for ~/.elisp:
~/.elisp/todo.org: Org-mode file in which I keep track of stuff that still needs to be done (+ wish list items).
~/.elisp/dotemacs: Symlink target for ~/.emacs, loads ~/.elisp/cfg/init.
~/.elisp/cfg: My own configuration files.
~/.elisp/modes: Modes that consist only of a single file.
~/.elisp/packages: Sophisticated modes with lisp, documentation and probably resource files.
I use GNU Emacs, that version does not have real support for packages. Therefore I organize them manually, usually like this:
~/.elisp/packages/foobar-0.1.3 is the root directory for the package. Subdirectory lisp holds all the lisp files and info is where the documentation goes. ~/.elisp/packages/foobar is a symlink that points to the currently used version of the package so that I don't need to change my configuration files when I update something. For some packages I keep an ~/.elisp/packages/foobar.installation file around in which I keep notes about the installation process. For performance reasons I compile all elisp files in newly installed packages, should this not be the case by default.
Here's a couple of my own stuff:
Inserts date in ISO 8601 format:
(defun insertdate ()
(interactive)
(insert (format-time-string "%Y-%m-%d")))
(global-set-key [(f5)] 'insertdate)
For C++ programmers, creates a class skeleton (class's name will be the same as the file name without extension):
(defun createclass ()
(interactive)
(setq classname (file-name-sans-extension (file-name-nondirectory buffer-file-name)))
(insert
"/**
* " classname".h
*
* Author: Your Mom
* Modified: " (format-time-string "%Y-%m-%d") "
* Licence: GNU GPL
*/
#ifndef "(upcase classname)"
#define "(upcase classname)"
class " classname "
{
public:
"classname"();
~"classname"();
private:
};
#endif
"))
Automatically create closing parentheses:
(setq skeleton-pair t)
(setq skeleton-pair-on-word t)
(global-set-key (kbd "[") 'skeleton-pair-insert-maybe)
(global-set-key (kbd "(") 'skeleton-pair-insert-maybe)
(global-set-key (kbd "{") 'skeleton-pair-insert-maybe)
(global-set-key (kbd "<") 'skeleton-pair-insert-maybe)
i use paredit for easy (e)lisp handling and ido-mode minibuffer completions.
It's hard to answer this question, because everyone uses Emacs for very different purposes.
Further more, a better practice may be to KISS your dotemacs. Since the Easy Customization Interface is widely supported amongst Emacs' modes, you should store all your customization in your custom-file (which may be a separate place in your dotemacs), and for the dotemacs, put in it only load path settings, package requires, hooks, and key bindings. Once you start using Emacs Starter Kit, a whole useful bunch of settings may removed from your dotemacs, too.
See EmacsWiki's DotEmacs category. It provides lots of links to pages addressing this question.
(put 'erase-buffer 'disabled nil)
(put 'downcase-region 'disabled nil)
(set-variable 'visible-bell t)
(set-variable 'tool-bar-mode nil)
(set-variable 'menu-bar-mode nil)
(setq load-path (cons (expand-file-name "/usr/share/doc/git-core/contrib/emacs") load-path))
(require 'vc-git)
(when (featurep 'vc-git) (add-to-list 'vc-handled-backends 'git))
(require 'git)
(autoload 'git-blame-mode "git-blame"
"Minor mode for incremental blame for Git." t)
I set up some handy shortcuts to web pages and searches using webjump
(require 'webjump)
(global-set-key [f2] 'webjump)
(setq webjump-sites
(append '(
("Reddit Search" .
[simple-query "www.reddit.com" "http://www.reddit.com/search?q=" ""])
("Google Image Search" .
[simple-query "images.google.com" "images.google.com/images?hl=en&q=" ""])
("Flickr Search" .
[simple-query "www.flickr.com" "flickr.com/search/?q=" ""])
("Astar algorithm" .
"http://www.heyes-jones.com/astar")
)
webjump-sample-sites))
Blog post about how this works here
http://justinsboringpage.blogspot.com/2009/02/search-reddit-flickr-and-google-from.html
Also I recommend these:
(setq visible-bell t) ; no beeping
(setq transient-mark-mode t) ; visually show region
(setq line-number-mode t) ; show line numbers
(setq global-font-lock-mode 1) ; everything should use fonts
(setq font-lock-maximum-decoration t)
Also I get rid of some of the superfluous gui stuff
(if (fboundp 'scroll-bar-mode) (scroll-bar-mode -1))
(if (fboundp 'tool-bar-mode) (tool-bar-mode -1))
(if (fboundp 'menu-bar-mode) (menu-bar-mode -1)))
One line to amend the load path
One line to load my init library
One line to load my emacs init files
Of course, the "emacs init files" are quite numerous, one per specific thing, loaded in a deterministic order.
emacs-starter-kit as a base, then I've added.. vimpulse.el, whitespace.el, yasnippet, textmate.el and newsticker.el.
In my ~/.emacs.d/$USERNAME.el (dbr.el) file:
(add-to-list 'load-path (concat dotfiles-dir "/vendor/"))
;; Snippets
(add-to-list 'load-path "~/.emacs.d/vendor/yasnippet/")
(require 'yasnippet)
(yas/initialize)
(yas/load-directory "~/.emacs.d/vendor/yasnippet/snippets")
;; TextMate module
(require 'textmate)
(textmate-mode 'on)
;; Whitespace module
(require 'whitespace)
(add-hook 'ruby-mode-hook 'whitespace-mode)
(add-hook 'python-mode-hook 'whitespace-mode)
;; Misc
(flyspell-mode 'on)
(setq viper-mode t)
(require 'viper)
(require 'vimpulse)
;; IM
(eval-after-load 'rcirc '(require 'rcirc-color))
(setq rcirc-default-nick "_dbr")
(setq rcirc-default-user-name "_dbr")
(setq rcirc-default-user-full-name "_dbr")
(require 'jabber)
;;; Google Talk account
(custom-set-variables
'(jabber-connection-type (quote ssl))
'(jabber-network-server "talk.google.com")
'(jabber-port 5223)
'(jabber-server "mysite.tld")
'(jabber-username "myusername"))
;; Theme
(color-theme-zenburn)
;; Key bindings
(global-set-key (kbd "M-z") 'undo)
(global-set-key (kbd "M-s") 'save-buffer)
(global-set-key (kbd "M-S-z") 'redo)
Always save my config in svn http://my-trac.assembla.com/ez-conf/browser/emacs.d
After reading this, I figured it would be good to have a simple site just for the best .emacs modifications. Feel free to post and vote on them here:
http://dotemacs.slinkset.com/
https://b7j0c.org/stuff/dotemacs.html
I'm new to emacs, in my .emacs file there are
indentation configuration
color theme
php mode, coffee mode and js2 mode
ido mode
FWIW, my .emacs is here:
http://svn.red-bean.com/repos/kfogel/trunk/.emacs
lots of stuff: https://github.com/tavisrudd/emacs.d
el-get has made managing it and dependencies a lot easier: https://github.com/tavisrudd/emacs.d/blob/master/dss-init-el-get.el
For Scala coders
;; Load the ensime lisp code... http://github.com/aemoncannon/ensime
(add-to-list 'load-path "ENSIME_ROOT/elisp/")
(require 'ensime)
;; This step causes the ensime-mode to be started whenever ;; scala-mode is started for a buffer. You may have to customize this step ;; if you're not using the standard scala mode.
(add-hook 'scala-mode-hook 'ensime-scala-mode-hook)
;; MINI HOWTO: ;; Open .scala file. M-x ensime (once per project)
My emacs configuration has grown up pretty big over the years and I have lot of useful stuff for me there but if I have two functions it probably would have been those ones.
Define C-x UP and C-x DOWN to move the current line or down keeping the cursor at the right place :
;Down/UP the current line
(global-set-key '[(control x) (up)] 'my-up-line)
(global-set-key '[(control x) (down)] 'my-down-line)
(defun my-down-line()
(interactive)
(let ((col (current-column)))
(forward-line 1)
(transpose-lines 1)
(forward-line -1)
(forward-char col)
)
)
(defun my-up-line()
(interactive)
(let ((col (current-column)))
(transpose-lines 1)
(forward-line -2)
(forward-char col)
)
)