I have this column chart that has 2 modes, monthly visualization and yearly visualization, the monthly visualization works just fine with many column, however, my yearly visualization is broken because i can't get the only column that appears to be on the center of the chart, it's always being set to the first point on my XAxis.
If I were using a NumberAxis it would be easy to solve, just set the column to the middle point (in this case, position 6 among the total of 12 months). However I'm using CategoryAxis, since it isn't ordered as NumberAxis is, I'm unable to use the same solution....
How can I achieve this result with a CategoryAxis ?
PS: No matter the SChartRange I set to this Axis, the column will always be set to the first position in the XAxis.
Found a way to achieve the result I wanted.
I've altered the range to be around the first dataPoint only, this way the column got placed in the middle of the chart without having to be the "middle dataPoint", being the ONLY dataPoint. The code goes into my sChart: dataPointAtIndex forSeriesAtIndex as follows
-(id<SChartData>)sChart:(ShinobiChart *)chart dataPointAtIndex:(int)dataIndex forSeriesAtIndex:(int)seriesIndex{
.
.
.
SChartNumberRange * numberRange;
if(isYearlyChart){
numberRange = [[SChartNumberRange alloc] initWithMinimum:[NSNumber numberWithFloat:-0.9]andMaximum:[NSNumber numberWithInt:(1)]];
}
The normal NumberRange I was using was from 1 through 13.
Hope this helps others with similar problems regarding this subject :)
PS: I'll mark this as the correct answer as soon as possible.
Related
I want to add a stacked chart but could not find a way to customize the time-axis.
Currently my x-axis refers to days, however, I search for a way to display years. Since I want a stacked chart that changes over time, I believe I need to use the 'Time Stack Chart' (see screenshot). I would also be happy with simply several stacked bars next to each other (each bar represents one year), but the 'Bar Chart' only supports one bar (I believe).
My model collects data from different sources on the last day of the year and then my chart should display this value for the year, categorized by source. I have tried with different data sets, both where the time is the horizontal value and where it is not.
When I use a dataset where one value is 'Years' (through the getYear() function) this works fine for plots, but not when I want to have a stacked chart (which by default depends on the time).
Is there a solution to this?
Please let me know if you need further information!
You need to go to the appearance part, time axis format, set it to yyyy. Also in the scale section, you need to change model time units to years.
I'm trying to put together a story and I'm starting to create the first pages with graphics. The graphs are based on tables that are in S4/HANA and have the format as shown in the first image but with more fields, in each line there are weeks (repeated, although they do not appear like that in the photo) and that week will have a condition; "SI" or "no".
When creating a graph I can represent the amount (y-axis) against the condition and the week (x-axis) and it would look like this (2nd photo). In addition to this, I would like to add another bar per week that represents the TOTAL, the sum of condition = "SI" and condition = "NO". Is it possible to do this from SAP Analytics Cloud or do I have to rack my brain changing the lines of the source table adding a total there?
As a clarification, I do not need to add 2 different numerical fields or anything, I would simply like to add the SIand NO of the condition column, if on the y-axis I put volume that represents volume and if I put amount that represents amount, but I am looking for a third bar With the total, I don't know if I explained myself well.
Thank you very much in advance, if you help me solve this I would be very grateful, greetings
https://ibb.co/dcCKKzF
https://ibb.co/kDN3ZXp
I am trying to create a stacked bar chart between 2 dimensions (one being week, other is a string - more below) and 1 measure. I am new to Looker.
But in order to get the stacked bar chart I figure that I need to
Create a pivot
Transpose the data
Create stacked bar chart
I am stuck with step 2 and 3.
The above steps is what I have thought could help me arrive at the visualization I want but would appreciate if there is any other solution for this.
Scenario:
I have a digital marketing data with me, where I am trying to create a visualization on ‘Leads’ generated,
I have 2 dimensions, 1 measure
Lead Created Week - Week on which a lead was created
Reason2 - reason a lead was created or what reason attracted the user most
Leads - count of leads
I have plotted the below visualization where I have created a pivot of week with Reason2 and Lead count under it and have plotted it on a stacked bar chart (as below).
Where each bar is a Reason (X-axis) and each color is the Week dimension, leads (count of leads) is in the Y-axis
Even though this is help what would be helpful is having ‘Week’ on X-axis, ‘Leads’ (count of leads) on Y-axis and ‘Reasons2’ dimension as a legend.
There is also one catch i.e., there are more than 100 distinct values in ‘Reason2’ field but I need to pick on Top 10 Reasons (i.e., the reasons that generated the most leads), which in the above screenshot I have achieved by limiting the display rows to 10 as the measure was already sorted.
I tried to flip around the pivot by having reason in pivot and Week as dimension, but if now the pivot is sorted in alphabetical manner and not by value of measures (screenshot below), I need the top 10 reasons which most leads per week.
How do I achieve the desired visualization of having week on X-axis with leads on Yaxis but only the top 10 Reasons should be generated.
I have created a chart with 2 axes that acts as a panel chart (see image)
As a panel chart I only want to show the portions of the relevant y-axes to the chart next to them. For example, for the right-most y-axis I used a custom number format to exclude anything less than 0:
_(* #,##0_);_("";_(* 0??_);_(#_)
But for the left most y-axis, I'm stuck. I want to show -400 to positive 400. I've tried 2 different options, but neither is producing the desired effect.
[<0](#,##0);[>500000000]"";#,##0_)
[<0](#,##0);[<500000000]#,##0_);""
Here is the result I'm looking for:
I learned something new today (and a bit weird) regarding formats and chart axes
After some experimenting, this is what I ended up using:
[White][>500]_(#,##0_);(#,##0);0;
The odd part: When you change the Display Units of the axis (for me, millions), then the formatting no longer recognizes the original amount (500,000,000).
Once I figured that out, I was able to work out the solution.
I have created a sparkline in SSRS. Since the values are small i get a straight line graph How do i improve the sensitivity of the graph.
the difference is like for every month
60.06
60.40
60.14
You need to look at the Sparkline Vertical Axis Properties.
Testing with data like yours and a simple Tablix/Sparkline I get results similar to yours:
Opening the Vertical Axis Properties I can see Always include zero is checked by default:
Unchecking this option has a major effect on the sparkline:
So this is one way of doing it. Other than that changing the Minimum and Maximum values here will also have an effect - you just need to play around and find the right combination for you.