Just out of curiosity, I wanted to try emacs + evil. Here's what I've done so far:
Installed emacs 24 on Windows 7 -- went well
Created an .emacs file in C:\Users\name\AppData\Roaming\ (where .emacs.d ended up)
Added the following to that .emacs file
(setq package-archives '(("ELPA" . "http://tromey.com/elpa/")
("gnu" . "http://elpa.gnu.org/packages/")
("marmalade" . "http://marmalade-repo.org/packages/")))
started emacs then M-x package-list-packages
selected evil, evil-leader, evil-numbers with i then x to install
restarted emacs
Evil shows as installed in package-list-packages and the evil files are present in .emacs.d\elpa, but evil doesn't seem to be loaded when I start emacs (No <N> in the status bar).
JUST starting with emacs. Not managing to get much out of it except for a lot of beeps. Want to start simple and use it for a few days before possibly moving forward with further extensions.
You should add following s-expressions to your .emacs.
(package-initialize)
(evil-mode 1) ;; enable evil-mode
Related
I am trying to configure emacs24 on my Ubuntu 15.10 laptop. I have both SBCL and CLISP installed (and both will run from the command line just fine). I have Slime installed, and I configured the .emacs file thus:
(add-to-list 'load-path "/usr/share/emacs/site-lisp/slime/")
(setq inferior-lisp-program "/usr/bin/clisp")
(require 'slime)
(slime-setup)
With Emacs24 running I hit M-x slime and slime starts up, but it's running SBCL, not CLISP. I don't understand why it's ignoring the inferior-lisp-program line. I know that Emacs24 is reading the .emacs file because if I delete everything in the file slime won't run at all. It just doesn't seem to care how I set setq.
I've double checked my paths and both slime and clisp are where the path descriptions indicate. Very confusing! Any help would be greatly appreciated.
I've read in a lot of places such as the WikEmacs (http://wikemacs.org/wiki/Evil) that Emacs24 already came with support for Evil mode, no need to install it via el-get. But I can't seem to understand how do I activate it.
I tried just adding the
(require 'evil)
(evil-mode 1)
lines to my .emacs but it can't seem to work, how do you guys use the built-in evil mode on emacs24? without cloning git repositories, etc.
The statement on WikEmacs is false; evil-mode is not included in Emacs 24. (As it's a wiki, I just edited the page and removed that text.)
There are many ways to install evil-mode. I'd suggest activating the MELPA package repository by adding the following to your .emacs file:
(require 'package)
(add-to-list 'package-archives
'("melpa" . "http://melpa.org/packages/") t)
(package-initialize)
Then type M-x list-packages, find evil in the list, and install it.
the following is output from a terminal session demonstrating that I, hopefully actually set this up right.
~ $cat .emacs
(require 'package)
(custom-set-variables
;;lots of comments generated by computer
'(package-archives (quote(("gnu" . "http://elpa.gnu.org/packages")
("marmalade" . "http://marmalade-repo.org/packages")
("melpa" . "http://melpa.milkbox.net/packages/")
("org" . "http://orgmode.org/elpa")))))
(custom-set-faces
;;again lots of comments added by the computer
)
(add-to-list 'load-path "/usr/share/emacs/24.3/site-lisp/mu4e")
~ $ ls /usr/share/emacs/24.3/site-lisp/mu43
#there are a lot of files here, but I am only going to show 2 right now
mu4e.elc
mu4e.el
... and yet emacs M-x mu4e returns [no match]. I have checked to load-path variable, and it is there. What am I doing wrong?
You need to add one more thing so that mu4e is loaded. There are two different ways to do this.
First, you could add (require 'mu4e) after you've added the path to your load-path. This will immediately load mu4e.
Alternatively, you could add the following:
(autoload 'mu4e "mu4e" "Launch mu4e and show the main window" t)
This will tell Emacs to load it lazily (i.e. not until you actually use it). Autoloading is documented here. (This is essentially done for you for packages installed via package.el - it's the same mechanism, you just don't need to specify it yourself).
The benefit of autoloads is that Emacs's initial startup is faster, since rather than loading every package right away it waits until you use them.
How to install the slime into emacs under Win7?
I download a compact package with '.tgz'. But it seems for linux. But there is really not one thing for windows(win 32 OS).
I unfold this package and I find there are lots of documents.
It's actually the same as for other operating systems, as far as I can tell. (At least, it always worked for me under FreeBSD/ArchLinux/Win7.) First, you unpack to a location you like, then add something like this to your .emacs (assuming you unpacked somewhere under your user directory):
(add-to-list 'load-path "~/my/path/to/slime/")
;; (add-to-list 'load-path "~/my/path/to/slime/contrib/") ; for optional features
(slime-setup
;; '(slime-fancy slime-asdf slime-references ; optional features
;; slime-indentation slime-xref-browser)
)
(setq slime-lisp-implementations
'((ccl ("~/path/to/ccl/wx86cl"))
(clisp ("~/path/to/clisp-2.49/clisp" "-modern"))) ; giving a command arg
slime-default-lisp 'ccl)
Restart Emacs or type C-x C-e behind each of these toplevel forms. Then, type M-x slime RET (or C-u M-x slime RET if you want to choose between the implementations in slime-lisp-implementations, otherwise slime-lisp-default will be used) and it should just work (it does for me). The setting of slime-lisp-implementations is optional – you can also give the path to your lisp implementation executable by hand when starting Slime.
Assuming you want to use Slime with CL, since there is no Clojure tag. If you want to use it with Clojure, things are unfortunately a little different and both versions don't play very nicely together. The recommended way for use with Clojure, last time I checked, would be installation using the package system of Emacs 24 or, if you're using an older version, ELPA (which is essentially the same).
This worked for me,
Get a Slime copy from https://github.com/slime/slime, either by git clone or by downloading the zip. Unzip and save it in D:/myuser/slime-2.13, for example
Download and install CLISP
Add this to the .emacs file, usually located in C:/users/myuser/AppData/Roaming:
; This is the path where you've saved Slime in the first step
(add-to-list 'load-path "D:/myuser/slime-2.13/")
(require 'slime-autoloads)
; This is the path where CLISP was installed.
; Use Progra~1 for "Program Files" and Progra~2 for "Program Files (x86)"
(setq inferior-lisp-program "/C/Progra~2/clisp-2.49/clisp.exe")
I've tried to migrate to Emacs several times for Clojure development, following a variety of blogposts, screencast and tutorials, but somewhere along the way something always went wrong - keybindings that didn't work, incompatible versions, etc, and I found myself scrambling back to Vim. But I know I want Paredit and SLIME.
So, I'm going to try again, this time backed by the powerful Stack Overflow™ community.
I hope that the answer to this question will remain up-to-date, and can serve as a reference for tentative converts like me.
What I'd like is:
The latest stable release of Clojure
Aquamacs (if it's good enough for Rich Hickey, it's good enough for me), a recent version
Clojure Mode
SLIME/SWANK
Paredit
Anything else that's indispensible?
Step-by-step instructions to install the above would be excellent - preferably in shell script format. I'd also like some hints on how to get started with the most common Clojure-related actions (including key-bindings), including links to documentation and cheatsheets.
These are the steps I took to set them up without using ELPA. Hope this helps.
Get SLIME using MacPorts
sudo port -v install slime
Get paredit
curl -O http://mumble.net/~campbell/emacs/paredit.el
Get clojure & clojure-contrib
Either using MacPorts
sudo port -v install clojure clojure-contrib
Or downloading directly
curl -O http://build.clojure.org/snapshots/org/clojure/clojure/1.1.0-master-SNAPSHOT/clojure-1.1.0-master-20091202.150145-1.jar
curl -O http://build.clojure.org/snapshots/org/clojure/clojure-contrib/1.1.0-master-SNAPSHOT/clojure-contrib-1.1.0-master-20091212.205045-1.jar
Get clojure-mode and swank-clojure (Emacs side)
git clone http://github.com/technomancy/clojure-mode.git
git clone http://github.com/technomancy/swank-clojure.git
Get swank-clojure (Clojure side)
Either downloading pre-built jar file
curl -O http://repo.technomancy.us/swank-clojure-1.1.0.jar
Or building from source (assuming lein is installed)
cd path/to/dir/swank-clojure
lein jar
Put clojure, clojure-contrib and swank-clojure .jar files in ~/.swank-clojure or ~/.clojure (the default places where swank-clojure.el searches for them).
Add to either ~/.emacs or ~/Library/Preferences/Aquamacs Emacs/customization.el (change paths to match your own settings)
(add-to-list 'load-path "/opt/local/share/emacs/site-lisp/slime/")
(add-to-list 'load-path "/opt/local/share/emacs/site-lisp/slime/contrib/")
;; Change these paths to match your settings
(add-to-list 'load-path "path/to/dir/clojure-mode/")
(add-to-list 'load-path "path/to/dir/swank-clojure/")
(add-to-list 'load-path "path/to/dir/paredit/")
;; Customize swank-clojure start-up to reflect possible classpath changes
;; M-x ielm `slime-lisp-implementations RET or see `swank-clojure.el' for more info
(defadvice slime-read-interactive-args (before add-clojure)
(require 'assoc)
(aput 'slime-lisp-implementations 'clojure
(list (swank-clojure-cmd) :init 'swank-clojure-init)))
(require 'slime)
(require 'paredit)
(require 'clojure-mode)
(require 'swank-clojure)
(eval-after-load "slime"
'(progn
;; "Extra" features (contrib)
(slime-setup
'(slime-repl slime-banner slime-highlight-edits slime-fuzzy))
(setq
;; Use UTF-8 coding
slime-net-coding-system 'utf-8-unix
;; Use fuzzy completion (M-Tab)
slime-complete-symbol-function 'slime-fuzzy-complete-symbol)
;; Use parentheses editting mode paredit
(defun paredit-mode-enable () (paredit-mode 1))
(add-hook 'slime-mode-hook 'paredit-mode-enable)
(add-hook 'slime-repl-mode-hook 'paredit-mode-enable)))
;; By default inputs and results have the same color
;; Customize result color to differentiate them
;; Look for `defface' in `slime-repl.el' if you want to further customize
(custom-set-faces
'(slime-repl-result-face ((t (:foreground "LightGreen")))))
(eval-after-load "swank-clojure"
'(progn
;; Make REPL more friendly to Clojure (ELPA does not include this?)
;; The function is defined in swank-clojure.el but not used?!?
(add-hook 'slime-repl-mode-hook
'swank-clojure-slime-repl-modify-syntax t)
;; Add classpath for Incanter (just an example)
;; The preferred way to set classpath is to use swank-clojure-project
(add-to-list 'swank-clojure-classpath
"path/to/incanter/modules/incanter-app/target/*")))
Download and install Aquamacs.
Download and install ELPA (http://tromey.com/elpa/install.html)
Do M-x package-list-packages
Mark the lines called "clojure-mode" and "swank-clojure" with "I" then press "X".
Done.
Here's a blog post that mentions Aquamacs: Setting up Clojure, Incanter, Emacs, Slime, Swank, and Paredit
There seems to be a fairly easy way to set up Aquamacs 2.4 and SLIME for clojure:
Install Clojure
Install Aquamacs 2.4 from here "http://aquamacs.org/"
Install the Aquamacs SLIME package from here "http://aquamacs.org/download.shtml"
This will not work so...
Get the latest version of SLIME from here "http://common-lisp.net/project/slime/#downloading" - you want the CVS snapshot tar file
Unpack the SLIME tar file and copy it into
/Library/Application Support/Aquamacs Emacs/SLIME
Seems to work OK for me...
I know the OP wants to use Emacs for Clojure dev. I'm an emacs fan myself, but I found using Enclojure (http://www.enclojure.org/home) to be a great way to get started quickly with hacking Clojure.
Today I would head for https://github.com/tehcurtis/aquamacs-emacs-starter-kit/network
this is for ruby and wont work at first but anyway. git clone and copy things to Preferences.el according to readme. Fix the brokenness by edit the ~/Library/Preferences/Aquamacs Emacs/ and comment out almost everything in modes.el (I have only (setq-default indent-tabs-mode nil) left in the file)
The good part: you have installed elpa-package-manager with less hassle
now: use
M-x package-list-packages
go to
clojure-mode (press I)
slime (press I)
slime-repl (press I)
Press X to install
done.
Caveat: clojure-jack-in wont work so you have to
M-x slime-connect
and press enter twice and y to start.