how to get a facebook status updates from certain fan page? - facebook

Updated:1/27/2013
After some research I found out that I need to do a http get ..
I am using graph apis . I am using the below url .
How ever each time I am getting a bad request?
https://graph.facebook.com/1021259526/statuses&limit=20&access_token=AAAFM2GZAUaXQBAIlkFVUKxZCXs2rbZCuyoHy0n1jKucWuA8QorbdOLzJ7Wr3TUUBMrcZB6j008RjnOtwWnNJTcmzWSXZAjKeFz
I have assumed access token to be for user access token which I get every time a user logs in.
Is there any thin I am doing wrong?

I am now able to get the json data .. For any one who gets stuck here I suggest you guys to use fiddler traces to capture the https traffic an duse that url in your app....
So my mistake here was https://graph.facebook.com/1021259526/statuses?method=GET&format=json&access_token="wahtever is teh access token" ....

Related

Getting access token Uber API

Im having trouble getting my access token from the uber API.
I get a code back from your server when I click login with uber-
I then put this into my headers in insomnia
.
grant_type:authorization_code (i just type 'authorization_code' here)
code: 0RWlkekK3kXdoKSDlbSuI6HAZHbb0K ( i know this expires after 10 mins but i have tried with different codes )
redirect_uri:http://localhost:3000/auth/uber/callback (the redirect i have on your app)
client_id:my_client_id (whatever it is in manage my app)
client_secret:my_client_secret
But i do not get a response from your server with my token.
What am i doing wrong?
thanks
If you give Uber localhost in your URI it will be trying to connect to itself, not back to your server. Use a hostname or IP address that is valid on the open Internet.
redirect_uri should exactly the same as the one you put on your dashboard.
the code may expire or been consumed (AngularJs $location redirection will make it expire for some reason)
Post the data body may need to jQuery: $.param(data) or AngularJs: $httpParamSerializer(data)

OneNote API - REST & Postman

I am trying to integrate the OneNote API as part of a new application. Is it possible to use Google Chrome's POSTMAN REST Client to test the API? The OneNote API appears to be standard REST, so there should be no reason why not.
To login, I followed the documentation and did a GET request in POSTMAN to
https://login.live.com/oauth20_authorize.srf?client_id=myClientIdIsHere&scope=wl.signin&response_type=token&redirect_uri=dontKnowWhatToPutHere
Broken down, that is:
https://login.live.com/oauth20_authorize.srf
client_id=myClientIdIsHere
scope=wl.signin
response_type=token
redirect_uri=dontKnowWhatToPutHere
I tried the following based off advice from this blog: http://blogs.msdn.com/b/onenotedev/archive/2014/07/23/how-to-authenticate-with-microsoft-account-in-a-chrome-extension.aspx
https://login.live.com/oauth20_authorize.srf?client_id=myClientIdIsHere&scope=wl.signin&response_type=token&redirect_uri=https://login.live.com/oauth20_desktop.srf
When I do a GET request to this, I get HTML back, but it does not show up in the preview mode.
Am I on the right track?
The code that you are trying to execute is just the initial part of the oAuth login process.
As you have mentioned the below peice
redirect_uri=dontKnowWhatToPutHere
redirect_uri is the URL of your application. Once the authentication is success, the server will redirect the navigation to provided URL and you can proceed further from here. Just keep in mind that the URL given is as same as the one you have provided while creating the azure app. If they do not match, the server is going to simply throw an exception.
Please change the JSON to
https://login.live.com/oauth20_authorize.srf
client_id=myClientIdIsHere
scope=wl.signin
response_type=token
redirect_uri=http://localhost:8008/login
Replace http://localhost:8008/login with your application login route.

Facebook Login: Is there a way to receive URL fragment in redirect as querystring parameter?

So when using Facebook login, it turns out that if you set response_type to token or code%20token then the "response data is included as a URL fragment" on the URL that redirects to your app. Seriously, why? When would that ever be useful to anyone?
Anyway, I'm hoping that this is somehow security related and that it's there for a reason other than to annoy people, but I would otherwise like to know if there's a way to disable it, since I'm using Angular and it's a real pain to handle urls with hashbangs.
If I set a response_type of code only, the code is returned as a nice and clean query parameter, but I would like to receive both in order to perform additional validations. Is there a way to change this behaviour? Thanks.
EDIT:
Well it turns out that setting a response_type of code returns #/= at the end of the url, so there's no way to get a clean querystring. It has already been established that there is no way to change this behaviour, but I'm still interested in finding out why Facebook is doing it. Is it security related? What is the purpose of these url fragments?
Answers
To your first question, I imagine you would use token when you are handling everything in-browser and not processing at the server.
To your main question, as far as I know, you can not change how Facebook redirects successful authorizations. Facebook doesn't give you the token as a clean query parameter. If you use token or code token, what you want will be in the hash fragment. Sorry.
NOTE: This may not be a problem for you. I'm not sure what you want with "additional validations", but when you use code token, exchanging the resulting code gets you a different token than the one you just got embedded in the URI. Both are now valid and will expire separately. Really, you probably need either the code or the token; both won't help you since they're not linked.
Examples of using all three methods:
If you set response_type to code you get redirected to something like:
http://example.com/redirect_uri?state=thestatepassed&code=AQDN9E9GYjA8NbyCt
87_jV5vHnCQylNxmBswo6Z1BsrR7lmTPom6wjrzfan6P4GBLDt3EQrfPg0xSLoMLxBBfscsyfSY
JNM2vu9OoqEQXXSJCTUq_fMpUwqkYbCHp-GAqL4H1ymbMz7zPKAG61V9BtKTSuez39yhawOu7l-
6ww4thP41Ka9PVcknTQ6fPjPXKYSyxEmANps9zevCPFsXpBZCO7_dms65-ZZuG2wVBd16gFnBZH
q8EY0qih6-9o61wXh7bBvVPVSZ2im7Oj1nx47YgDpbD3X0XdlVhUoGYmBdER9hNmIC2PmmY7VAo
PlYCZc#_-_
From there, you need to exchange the code through Facebook's OAuth endpoint to receive an access token. The access token can then be used against the Facebook APIs.
If you set response_type to token you get redirected to something like:
http://example.com/redirect_uri#access_token=CAACYnSxGEhsBAJBg0ohZBhAf7pKEU
sm5ytZAZBzKjISFuRun2ZByZCqEsxrVIgtiO7iIlJZBBbGm6fRPQXItZCX6YgjPknUBsr78tJtv
W6fySULrUo9vdW57ZCMUUIlNaeZAcU8DzUXKmFpgotOyhE3jXYz1c3eu00Aii0AZBsPrtrwjpwQ
mV8VYQNiqKZBIsqOrIwZD&expires_in=4168&state=thestatepassed
You have everything you need to call the Facebook APIs. The access token returned is valid, but should probably be checked against Facebook's token inspection endpoint if you're doing something server-side. (Really, at that point, just use code. I've never done it this way, so good luck.)
As you noted, the access token is now contained within the hash fragment of the url.
If you set response_type to code token you get redirected to something like:
http://example.com/redirect_uri#code=AQAtzsjPivFPsJ538KFlPuhLaK6pDMlrGDiwmi
KDcpgNfWrO1EdX5i6zK_Op2D0QDEXZLyifXxh4TSeBZCWhnkl7YV1LMyEkbPURAWSoqRoeG7tfM
4nB4nDAHOK0H9umb0KnoypRT1pP05FJKhl2QjpCJrPPFDHl6y-1X9ZMj1uVHtmPNi4tG_6QAbuL
RaGadBkekb22uJ0iwSrWc9OKi6ET70lCTYb18hbwUkzHXtTq12nNEdsDJ7Ku2wEBwMygFwErYDX
CrnPoFoah_z0UPCfv3XZLy98Dhlzw_lnx8nnCB-PCppOWRqmydvQJehPd86k&access_token=C
AACYnSxGEhsBALXHRQwfm4UoauRlZBJDVpZCiM6ZCuM3bE965F5JVBfBB8inTFdhfJ5obnonSqa
m3v8FbWhHXrhRSx4ugwAmmDaWyxmPELWqSrkrDO5ueTUXhhjiEZBTd7HjCVCSOXXhOSo3DjEVSC
lOaZBfqmXsprYyc6LJC39sroCcHYCZCv&expires_in=5183426&state=thestatepassed
Now you have both an access token and a code (that expiration applies to the token, not the code). As stated earlier, that code can be exchanged for an access token in the usual way, but the returned access token will be different from the one you just got embedded in the URI.
But, again, what you care about is in the hash fragment.
See the AngularJS doc on $location for accessing the hash. Someone more knowledgable than me can speak to how that works with routes and how best to scrape the parameters.
Well today I had the same situation and managed to resolve it in a way I could get the access token from my server.
After getting the code using response_type=code I called via GET the following url:
https://graph.facebook.com/v3.2/oauth/access_token?app_id=MY_APP_ID&code=MY_CODE&client_id=MY_APP_ID&client_secret=MY_APP_SECRET&redirect_uri=YOUR_LOGIN_REDIRECT_URI
This route returns a JSON response, which has the access_token parameter, in this way:
{
"access_token": "ABAECAEFAEFAEA...",
"type": "bearer",
"expires_in": 838383838
}
So there you go :) I hope this works for you too

Facebook server-side OAuth 2.0 on localhost:8080 can't get access token missing redirect_uri

There are many other question related to this, but they didn't help me fix my problem.
I'm using the Facebook server-side login for a website, which I want to test locally. The path that initiates the login action is [http://localhost:8080/fblogin] (this redirects to the Facebook login dialogue, and goes from there).
I can successfully get the code, but when I try to exchange that for an access token, I get the following error:
{"error":{"message":"Missing redirect_uri parameter.","type":"OAuthException","code":191}}
I am providing the redirect_uri, url encoded and it is the same as the one I use to get the first code. Here is the url I'm using to request the access token (with the all-caps query string parameters replaced with their actual values, of course):
https://graph.facebook.com/oauth/access_token?client_id=CLIENT_ID&redirect_uri=http%3A%2F%2Flocalhost%3A8080%2Ffblogin&client_secret=CLIENT_SECRET&code=CODE_FROM_FB
I suspect this might have to do with how my app is set up on Facebook. Here are the values I have set:
Display Name: (an actual display name here)
App Domains: localhost
Contact email: (an actual email here)
Site URL: [http://localhost:8080/fblogin]
What do I need to tweak in the settings to get this to work? Or does this look correct?
By the way, if it makes any difference, I am using the Play! framework, version 2.0.1
After digging around a little more, I found that it was necessary for me to use POST when sending the request from my server to get the access token.
Interesting that using POST worked for you as this didn't for me.
In any case, did you add the query parameters using setQueryParameter()? (see How to make multiple http requests in play 2?)

Facebook server-side authentication flow: is this the right "code?"

I'm using FB.login on the JS client and want to verify the user's identity on the server. So, the client gets a signedRequest from facebook and sends it to the server. The server splits on the period, and decodes the second part of the signedRequest into a json object.
What should I be using for "code" when I send my server-side request to
https://graph.facebook.com/oauth/access_token?
client_id=YOUR_APP_ID
&redirect_uri=YOUR_REDIRECT_URI
&client_secret=YOUR_APP_SECRET
&code=CODE_GENERATED_BY_FACEBOOK
My decoded json looks something like:
{"algorithm":"HMAC-SHA256","code":"2.AQCPA_yfx4JHpufjP.3600.1335646800.1-5702286|l11asGeDQTMo3MrMx3SC0PksALj6g","issued_at":1335642445,"user_id":"5232286"}
Is that the code I need? Does it need to be B64 encoded? If this isn't the code, what code should I use?
_
What I've tried:
The request I'm trying to use is:
https://graph.facebook.com/oauth/access_token?client_id=295410083869479&redirect_uri=https://squaredme.appspot.com/facebookredirect&client_secret=44f1TOPSECRETbb8e&code=2.AQCPA_yfx4JHpufjP.3600.1335646800.1-5702286|l11asGeDQTMo3MrMx3SC0PksALj6g
but this returns the error:
{"error":{"message":"Error validating verification code.","type":"OAuthException","code":100}}
I can't tell if this is because I'm using a bad code, or what. Noteably, this is running on my local dev server, and squaredme.appspot.com definitely does NOT resolve to my IP. I don't know if facebook checks that or what - I'm assuming I'd get a better error message. Thanks for any direction!
You are trying to somehow combine the two flows together and that's why things don't work well.
When facebook POSTs into the iframe with your app url and a signed request there are two options, the easy one being that the user is already authenticated and then the signed request will have all the necessary data (including a signed request), then you just load the canvas page and use the JS SDK to get an access token there as well, but in this case there's no need to use the FB.login (since it opens a popup and will automatically close it), you can use the FB.getLoginStatus method which won't annoy the user.
If the user is not authenticated then the sign request will be missing the things you need to use the graph api.
You then redirect the user to the auth dialog, and since you are loaded in an iframe you'll need to return a html response which redirects the parent window using javascript, like:
top.location.href = "AUTH_DIALOG_URL";
When the use is done (accepted or rejected the app) he will be redirected to the "redirect_uri" you added as a parameter to the auth dialog.
If the user accepted your app then you'll be getting the "code" parameter in the query string.
You then take the code, exchange it with an access token as you posted in your question, and then redirect the user back to "apps.facebook.com/YOUR_APP".
When the page then loads the user is already authenticated and you'll be getting a full signed request.
I hope this clarifies things for you, recheck the Server-Side flow it pretty much covers it all.
I also had some trouble with that, then I found the solution here in StackOverflow.
There are two kinds of "code" provided by facebook. One comes inside the signedRequest in the cookie generated by the client-side flow. The Facebook's JS SDK handles this codes and get a access token without telling us anything.
The other type of code comes attached as a query to your redirect URI (http://www.yoururl.com/index.php?code=AAAgyiaus...), when you navigate to OAuth URL (server-side flow). With this code, you go to a Token URL and get your access token.
When you are using the server-side flow, you need to indicate a redirect URI both in the OAuth URL AND in the Token URL, and they have to be exactly the same, so a missing slash or a query string can be a lot of problem.
The codes are different from each other. When you use the both things together, appears to be impossible to get a access token using the code that was inside the cookie's signedRequest.
BUT, it is not. The magic is: the code from signedRequest is associated with NO URI, so as long as the redirect_uri is a mandatory field, all you have to do is to pass it blank when you navigate to the Token URL.
So the final solution is: grab the signedRequest from the cookie, parse it in your server to obtain the code, then read the Token URL:
https://graph.facebook.com/oauth/access_token?
client_id=YOUR_APP_ID
&redirect_uri=&client_secret=YOUR_APP_SECRET
&code=CODE_INSIDE_THE_SIGNED_REQUEST
It looks like a hack, so I don't know how long it's gonna work, but it's working right now.