Camera freezes upon switching to the front facing camera - iphone

Question

My problem
I am using AVFoundation to capture the frames of the video output every 5 seconds. When the user taps a button, the input camera should switch from the front one to the back one and the opposite. Problem is, every time I switch the back camera to the front camera it freezes (oddly enough, it works the other way around - meaning, front camera to back camera)!
The code I use
To switch between the cameras, I use the exact code taken from Apple's AVCam sample code with a slight change of variable names (so it will match my code):
- (BOOL)toggleCamera
{
BOOL success = NO;
if ([self cameraCount] > 1) {
NSError *error;
AVCaptureDeviceInput *newVideoInput;
AVCaptureDevicePosition position = [[self.videoInput device] position];
if (position == AVCaptureDevicePositionBack)
newVideoInput = [[AVCaptureDeviceInput alloc] initWithDevice:[self frontFacingCamera] error:&error];
else if (position == AVCaptureDevicePositionFront)
newVideoInput = [[AVCaptureDeviceInput alloc] initWithDevice:[self backFacingCamera] error:&error];
else
goto bail;
if (newVideoInput != nil) {
// Start configuring the session.
[[self captureSession] beginConfiguration];
// Remove the current video input device.
[[self captureSession] removeInput:[self videoInput]];
if ([[self captureSession] canAddInput:newVideoInput]) {
[[self captureSession] addInput:newVideoInput];
[self setVideoInput:newVideoInput];
}
else {
[[self captureSession] addInput:[self videoInput]];
}
[[self captureSession] commitConfiguration];
success = YES;
[newVideoInput release];
}
else if (error) {
NSLog(#"PICTURE TAKER: Failed to toggle cameras."
#"\nError: %#", error.localizedDescription);
}
}
bail:
return success;
}
And to setup the AVCaptureSession, again, I use the exact same code from the AVCam sample code, with a slight change in the added output, (to match my needs):
- (BOOL) setupSession
{
BOOL success = NO;
// Set torch and flash mode to auto
if ([[self backFacingCamera] hasFlash]) {
if ([[self backFacingCamera] lockForConfiguration:nil]) {
if ([[self backFacingCamera] isFlashModeSupported:AVCaptureFlashModeAuto]) {
[[self backFacingCamera] setFlashMode:AVCaptureFlashModeAuto];
}
[[self backFacingCamera] unlockForConfiguration];
}
}
if ([[self backFacingCamera] hasTorch]) {
if ([[self backFacingCamera] lockForConfiguration:nil]) {
if ([[self backFacingCamera] isTorchModeSupported:AVCaptureTorchModeAuto]) {
[[self backFacingCamera] setTorchMode:AVCaptureTorchModeAuto];
}
[[self backFacingCamera] unlockForConfiguration];
}
}
// Init the device inputs
AVCaptureDeviceInput *newVideoInput = [[AVCaptureDeviceInput alloc] initWithDevice:[self frontFacingCamera] error:nil];
// Create a video output & configure it.
AVCaptureVideoDataOutput *newVideoDataOutput = [[AVCaptureVideoDataOutput alloc] init];
newVideoDataOutput.videoSettings = #{(NSString *)kCVPixelBufferPixelFormatTypeKey : #(kCVPixelFormatType_32BGRA)};
// Set the output's delegate.
dispatch_queue_t queue = dispatch_queue_create("MyQueue", NULL);
[newVideoDataOutput setSampleBufferDelegate:self queue:queue];
dispatch_release(queue);
// Create session (use default AVCaptureSessionPresetHigh)
AVCaptureSession *newCaptureSession = [[AVCaptureSession alloc] init];
// Add inputs and output to the capture session
if ([newCaptureSession canAddInput:newVideoInput]) {
[newCaptureSession addInput:newVideoInput];
}
if ([newCaptureSession canAddOutput:newVideoDataOutput]) {
[newCaptureSession addOutput:newVideoDataOutput];
}
[self setVideoOutput:newVideoDataOutput];
[self setVideoInput:newVideoInput];
[self setCaptureSession:newCaptureSession];
[newVideoDataOutput release];
[newVideoInput release];
[newCaptureSession release];
// Get our view's layer.
CALayer *viewLayer = self.view.layer;
// Add the the session's preview layer.
AVCaptureVideoPreviewLayer *captureVideoPreviewLayer = [[AVCaptureVideoPreviewLayer alloc] initWithSession:self.captureSession];
captureVideoPreviewLayer.videoGravity = AVLayerVideoGravityResizeAspectFill;
captureVideoPreviewLayer.frame = self.view.bounds;
[viewLayer insertSublayer:captureVideoPreviewLayer below:self.imageViewOverlay.layer];
[captureVideoPreviewLayer release];
success = YES;
return success;
}
*Important note: the camera freezes right after the call to the output's delegate.
Can anyone please help me solve this? It seems as if I had tried almost everything!
Update #1
As requested, self is referring to a view controllers that presented the session's preview layer and manages all things related to the camera. In addition, I'm posting the code the handles the frontFacingCamera part, which is (just like all of the code that I have posted so far) taken from Apple's AVCam sample code:
// Find a camera with the specificed AVCaptureDevicePosition, returning nil if one is not found
- (AVCaptureDevice *) cameraWithPosition:(AVCaptureDevicePosition) position
{
NSArray *devices = [AVCaptureDevice devicesWithMediaType:AVMediaTypeVideo];
for (AVCaptureDevice *device in devices) {
if ([device position] == position) {
return device;
}
}
return nil;
}
// Find a front facing camera, returning nil if one is not found
- (AVCaptureDevice *) frontFacingCamera
{
return [self cameraWithPosition:AVCaptureDevicePositionFront];
}

Answer 1

BOOL isUsingFrontFacingCamera;
- (BOOL) swapCameras
{
if ([self cameraCount] > 1) {
AVCaptureDevicePosition desiredPosition;
if (isUsingFrontFacingCamera) {
desiredPosition = AVCaptureDevicePositionBack;
} else {
desiredPosition = AVCaptureDevicePositionFront;
}
for (AVCaptureDevice *d in [AVCaptureDevice devicesWithMediaType: AVMediaTypeVideo]) {
if ([d position] == desiredPosition) {
[[self session] beginConfiguration];
AVCaptureDeviceInput *input = [AVCaptureDeviceInput deviceInputWithDevice:d error:nil];
for (AVCaptureInput *oldInput in [[self session] inputs]) {
[[self session] removeInput:oldInput];
}
[[self session] addInput:input];
[[self session] commitConfiguration];
break;
}
}
isUsingFrontFacingCamera = !isUsingFrontFacingCamera;
return YES;
}
return NO;
}
Answer from here
EDITED : This from Square Cam Apple sample code. Works fine. Tested also. http://developer.apple.com/library/ios/#samplecode/SquareCam/Listings/SquareCam_SqareCamViewController_m.html
// use front/back camera
- (IBAction)switchCameras:(id)sender
{
AVCaptureDevicePosition desiredPosition;
if (isUsingFrontFacingCamera)
desiredPosition = AVCaptureDevicePositionBack;
else
desiredPosition = AVCaptureDevicePositionFront;
for (AVCaptureDevice *d in [AVCaptureDevice devicesWithMediaType:AVMediaTypeVideo]) {
if ([d position] == desiredPosition) {
[[previewLayer session] beginConfiguration];
AVCaptureDeviceInput *input = [AVCaptureDeviceInput deviceInputWithDevice:d error:nil];
for (AVCaptureInput *oldInput in [[previewLayer session] inputs]) {
[[previewLayer session] removeInput:oldInput];
}
[[previewLayer session] addInput:input];
[[previewLayer session] commitConfiguration];
break;
}
}
isUsingFrontFacingCamera = !isUsingFrontFacingCamera;
}