I am getting files from Oracle UCM via RIDC. I am using DataBinder as follows :
IdcClient client =getUCMConnection();
DataBinder dataBinder = client.createBinder ();
dataBinder.putLocal ("IdcService", "GET_FILE");
dataBinder.putLocal ("dID", dID);
IdcContext userContext = new IdcContext(username);
ServiceResponse response = client.sendRequest (userContext, dataBinder);
InputStream fstream = response.getResponseStream ();
....... etc.
I want to ask, how can I get "ALL VERSIONS" of a document instead of latest released one?
First you have to call the service DOC_INFO, you can get the result set of the revision by using the REVISION_HISTORY set.
You will get specific dID for each version, you iterate them and use GET_FILE with dID as a parameter for each one of them
I can't test it right now but I think the service you are looking for is GET_INFO, try it and check all the resultsets you get I'm pretty sure one of them has the info for all the document's revisions.
You can use the service REV_HISTORY to get the result set REVISIONS which contains info of all the revisions.
Related
My system has to generate an xml in which the node ORM_O01.ORDER_DETAIL must contain the node ORM_O01.OBRRQDRQ1RXOODSODT_SUPPGRP, because it has to communicate with Mirth.
I am using the nhapi library version 2.5, in which this node does not contain it.
var obr = _ormO01Message.GetORDER().ORDER_DETAIL.OBR;
obr.SetIDOBR.Value = "1";
obr.PlacerOrderNumber.EntityIdentifier.Value = "123456";
obr.PlacerOrderNumber.NamespaceID.Value = "6543";
obr.PlacerOrderNumber.UniversalID.Value = "10009";
obr.UniversalServiceIdentifier.Identifier.Value = "NS";
Is it possible to add a node in ORM_O01.ORDER_DETAIL that is not standard?
Thanks.
<ORM_O01.ORDER_DETAIL>
<ORM_O01.OBRRQDRQ1RXOODSODT_SUPPGRP>
<OBR>
<OBR.1>1</OBR.1>
<OBR.2>
<EI.1>123456</EI.1>
<EI.2>6543</EI.2>
<EI.3>10009</EI.3>
</OBR.2>
<OBR.4>
<CE.1>NS</CE.1>
</OBR.4>
</OBR>
</ORM_O01.OBRRQDRQ1RXOODSODT_SUPPGRP>
</ORM_O01.ORDER_DETAIL>
ORM_O01.OBRRQDRQ1RXOODSODT_SUPPGRP looks like it actually is standard for 2.5, but neither nhapi or hapi (which mirth uses) include it. I wouldn't worry about trying to add it in because mirth probably wouldn't be able to parse it if you did.
See similar issue where a mirth user needed to strip that group out.
I try to use eclipse P2 to enable a tool of mine for auto-updating itself on eclipse start up. While doing so, I want to use an UpdateOperation which is only suited to "my" feature with id "my.feature.id". Whenever this query gets issued in an eclipse installation it has an empty result and thus nothing to update.
So: How do I use the QueryUtil right to get a collection containing only my feature for update as input for an UpdateOperation?
The following method is called when wanting to start the update on eclipse start up:
public class P2Util {
public static IStatus checkForUpdates(IProvisioningAgent agent, IProgressMonitor monitor) {
ProvisioningSession session = new ProvisioningSession(agent);
IQuery<IInstallableUnit> query = QueryUtil.createLatestQuery(QueryUtil.createIUQuery("my.feature.id"));
UpdateCheckActivator.info("Update Query Expression: " + query.getExpression());
IProfileRegistry registry= (IProfileRegistry)agent.getService(IProfileRegistry.SERVICE_NAME);
IProfile profile= registry.getProfile(IProfileRegistry.SELF);
IQueryResult<IInstallableUnit> result = profile.query(query, monitor);
Set<IInstallableUnit> unitsForUpdate = result.toUnmodifiableSet();
UpdateOperation operation = new UpdateOperation(session, unitsForUpdate);
}
}
The solution is very simple but confusing at first. The query trying to find features with "my.feature.id" was querying for the wrong id.
In the feature.xml of my feature it is "my.feature.id" but the installable unit gets for unobvious reasons the suffix "feature.group". If one adds this to the id in the query, you get the correct result and the update operation succeeds as expected.
I would like to search for a text in an attribute of UCM content using RIDC. If I use GET_SEARCH_RESULTS service, I will be getting only the latest revision the of result document. But I want to get all the revisions, which will fall in to the given search criteria. is there any way for the same?
Sample code is here..
String whereClause = "UPPER(XCOMMENTS) LIKE '%VALUE%'";
dataBinder.putLocal("IdcService", "GET_DATARESULTSET");
dataBinder.putLocal("dataSource", "Documents");
dataBinder.putLocal("whereClause", whereClause);
dataBinder.putLocal("resultName", "YourResult");
ServiceResponse response =
idcClient.sendRequest(userContext, dataBinder);
System.out.println(response.toString());
DataBinder serverBinder = response.getResponseAsBinder();
DataResultSet resultSet = serverBinder.getResultSet("YourResult");
Do you want to search for against full-text or metadata?
If metadata, you should be able to use service GET_DATARESULTSET and dataSource RevisionIDs.
If full-text, you might need to roll your own.
I'm trying to query QBO for, among other entities, Accounts, and am running into a couple of issues. I'm using the .Net Dev Kit v 2.1.10.0 (I used NuGet to update to the latest version) and when I use the following technique:
Intuit.Ipp.Data.Qbo.AccountQuery cquery = new Intuit.Ipp.Data.Qbo.AccountQuery();
IEnumerable<Intuit.Ipp.Data.Qbo.Account> qboAccounts = cquery.ExecuteQuery<Intuit.Ipp.Data.Qbo.Account>(context);
(i.e. just create a new AccountQuery of the appropriate type and call ExecuteQuery) I get an error. It seems that the request XML is not created properly, I just see one line in the XML file. I then looked at the online docs and tried to emulate the code there:
Intuit.Ipp.Data.Qbo.AccountQuery cquery = new Intuit.Ipp.Data.Qbo.AccountQuery();
cquery.CreateTime = DateTime.Now.Date.AddDays(-20);
cquery.SpecifyOperatorOption(Intuit.Ipp.Data.Qbo.FilterProperty.CreateTime,
Intuit.Ipp.Data.Qbo.FilterOperatorType.AFTER);
cquery.CreateTime = DateTime.Now.Date;
cquery.SpecifyOperatorOption(Intuit.Ipp.Data.Qbo.FilterProperty.CreateTime,
Intuit.Ipp.Data.Qbo.FilterOperatorType.BEFORE);
// Specify a Request validator
Intuit.Ipp.Data.Qbo.AccountQuery cquery = new Intuit.Ipp.Data.Qbo.AccountQuery();
IEnumerable<Intuit.Ipp.Data.Qbo.Account> qboAccounts = cquery.ExecuteQuery<Intuit.Ipp.Data.Qbo.Account>(context);
unfortunately, VS 2010 insists that AccountQuery doesn't contain a definition for SpecifyOperatorOption and there is no extension method by that name. So I'm stuck.
Any ideas how to resolve this would be appreciated.
My question is quite simple and with the SharpSvn Api, it should be easy as well. Here what I did:
path = "c:\project";
using (SvnLookClient client = new SvnLookClient())
{
SvnLookOrigin o = new SvnLookOrigin(path);
Collection<SvnChangedEventArgs> changeList;
client.GetChanged(o, out changeList); // <-- Exception
}
and when I call the GetChanged, I get an exception:
Can't open file 'c:\project\format': The system cannot find the file specified.
So, Maybe there is something I'm missing? Or maybe it's not the right way to do find out the list of files and folders that were modified in the local repository?
Thanks in advance.
The SvnLookClient class in SharpSvn is the equivalent to the 'svnlook' console application. It is a low level tool that enables repository hooks to look into specific transactions of a repository using direct file access.
You probably want to use the SvnClient class to look at a WorkingCopy and most likely its Status() or in some cases simpler GetStatus() function to see what changed.
The path that the SvnLookOrigin constructor wants is actually:
path = "c:\project\.svn\";
That is, it wants that special ".svn" directory not just the root of where the source is checked out to.
Although you probably do want to listen to Bert and do something like:
path = "c:\project";
using (SvnLookClient client = new SvnLookClient())
{
SvnLookOrigin o = new SvnLookOrigin(path);
Collection<SvnChangedEventArgs> changeList;
client.GetStatus(o, out changeList); // Should now return the differences between this working copy and the remote status.
}