Is it possible to create Visio drawings from a Linux server ?
That is, without access to the Visio software. Language can be python, php, C ..
Short answer: Yes
There are a couple of options available to you:
1 - Generate VDX or VSDX files. These are XML-based formats that Visio can read. (VSDX is new and can only be read by Visio 2013). If you can generate XML files on Linux then you can create these files. I wrote such a library that can help create VDX files - Look for VisioAutomation.VDX here: https://github.com/saveenr/VisioAutomation
also you could look at http://pkgvisio.codeplex.com/.
2 - Generate VSD. This is a binary format and harder to create. LibreOffice has a library to generate this format. Also the "Aspose.Diagram" can do this but as-far-as-I-know does not work on a Linux server.
Related
I am trying to convert MS Word file to chm file. I have a well organized word document. But,I could not figure out how to word saved as a html file to chm file. I know I can add html file to created project but there are some issue such that I could not solve how to convert ms word table of content file to index file in html help workshop program. I would be very happy If someone provide some example about conversion of word documents.(I am trying to achieve this thorough HTML Help Workshop program)
Best regards,
Converting a Word document to CHM format is difficult without special (often expensive) tools and has a learning curve.
You should think about whether the PDF format is not sufficient. But the CHM format - integrated in the Windows operating system - has of course some popular functions.
I recommend to read through Search and Index not working after converting from Word 2016 to CHM.
As I mentioned in my answer I never used chmProcessor before (because using other tools) but surprisingly seems to be a good one for converting Word documents in a simple way.
Please try chmProcessor for your needs. You may want to ask a new question here on SO later.
Edit:
Maybe you have additional interest in the following CodeProject article:
How to Easily Write a User's Guide for Your Application using Different File Extensions
What are people using in vfp 9 for a replacement for the built-in scctext.prg that translates binary files in vfp to a textual representation?
We’ve moving an existing project that’s in vfp 9 sp1 into tfs source control, but we need a way to make sure that the non-textual files are able to get the benefits of comparison that only non-binary text files allow. We plan to check both the textual representation and the binary file into source control (the binary is more for the “just in case” scenario)
According to the document at
http://www.ita-software.com/papers/Borup_Mercurial_Published.pdf
there are at least three options for converting .scx, .frx, .lbx, .prj and other non-prg dbf files in visual foxpro (vfp) to a textual representation. Only some of them allow for converting the textual information back to binary - not sure how often we’d really use that or not.
ALTERNATE SCCTEXT
This one seems older with latest version in 2009 - not sure if it’s still the preferred tool - and it seems to have no way to take the textual representation and convert it back to a binary file.
http://vfpx.codeplex.com/releases/view/12955
TWOFOX
This one seems similar to the foxbin2prg except it creates xml files - seems like only one dev is working on it unlike the others that are open to contributions from others so not sure how current it is and how much it’s being used by other developers - it does have two way conversion like fox2binprg has.
http://www.foxpert.com/downloads.htm
FOXBIN2PRG
This one is fairly recent - but not sure if it’s production ready enough to use for prod coding working - it does have two way conversion
http://vfpx.codeplex.com/releases/view/116407
TRIGGER INVOKE ONE OF THE ABOVE ON CHANGE OF BINARY FILES IN VFP IDE
What are people using to invoke these textual representation options?
I’ve seen this class that was created to run one of the programs listed above for all files in the project. Apparently it does it when the date time of the last generate is older that the date time on the textual version of the file. One detriment I’ve read is that it generates for foundation classes and other things that really are not items that a dev is working on (code that is referenced by but not included in your project).
http://codepaste.net/9yy1gm
Thanks for any advice from those that are using vfp 9 with source control out there!
You should check out the scX library written by Paul McNett which is published on Ed Leafe's web site. I haven't used it in a mission-critical software project yet, but I have tested it out. It seemed to catch all the potential problems I've encountered with other scctext replacements.
The reason I haven't used it in a big project for a couple of reasons.
It is a breaking change for source control history. So, comparing source code in your current SCA or VCA files with the new files generated by scX isn't going to be simple.
It isn't a drop in replacement for scctext. Instead of checking files into and out of source control directly from the IDE, you'll have an intermediary folder.
You'll check your files out of source control into one folder, convert them to FoxPro format, and then edit them in the FoxPro IDE.
Then, you'll save your changes in the FoxPro IDE, convert them to scX format, and then check them into source control.
I'm sure much of #2 can be automated; but combined with #1, making the change to scX wasn't worth it for me.
FoxBin2Prg is Production ready, and AFAIK, it's the only tool that allow Diff and Merge of the generated text (tx2) files, and can regenerate the binaries from them.
The generated files are PRG style, so developers can see them as modifying a PRG (with PROc/ENDPROC structures and such), but they aren't mean to compile. Primary use is for SCM tools, but can be used seperately.
I'm actually using on production code with a 10 member team using concurrent modifications on forms and classes.
Some documentation is available on VFPx in English and Spanish, Internal messages are vailable on both languages and from version v1.19.24 a new translation to German is available too.
More info on VFPx site,
Best regards!
I am currently using Apache FOP and have a stylesheet (possibly from RenderX) that converts Word 2003 XML documents (Saved as XML option) to PDF. However, this does not work for Word 2007 XML documents.
I am looking for options and/or suggestions on how to accomplish one of the following tasks -
Get a stylesheet that will transform Word 2007 XML file to:
Word 2003 XML or
PDF using FOP (using a stylesheet to create xsl-fo)
I am also open to any other options you might have. If possible I would like to do this with little to no cost. However, I am limited to using Java so a C# type option is not possible.
Thanks,
You could try docx4j, an open source Java library (ASL v2) which uses FOP to create PDFs from docx files.
I'm not aware of any style sheets that do this transformation. It would be reasonably sophisticated. If you end up having to engineer another way of doing it, you might want to look at JODConverter (straight conversion - might be your best bet), the OpenOffice UNO API (very manual), JODReports or Docmosis (both can produce documents in various formats). All can produce PDFs from a Java environment. I think they all have free versions.
Hope that helps.
I need some help with conversion of DocBook files to Microsoft Word files.
Do I need an XSL file for the transformation?
Yes, you do need an XSL file. You can get XSL files for DocBook from the free DocBook XML distribution. Then, you run a free XSLT transformer such as Saxon. If you run Saxon from a command line, you give it the name of your DocBook file, and the name of one of the stylesheets, and it will transform your file according to the rules in the stylesheet.
What you need to do to transform to Word, is to pick the right stylesheet.
From DocBook XSL: The Complete Guide, here are three possibilities:
Convert to XSL-FO and then use the XMLmind to export to Word. See the XMLmind website for more information.
Use a limited set of tags and then use one of DocBook XML's included stylesheets to output to WordML.
Try to use Jfor to output to RTF, although Jfor no longer appears to be maintained.
And I have one of my own:
As above, use one of DocBook XML's included stylesheets to publish to XSL-FO, then run Apache FOP to convert from XSL-FO to RTF. You will lose the structural information, but you will keep a certain amount of the formatting.
I recently implemented same feature for our users. They use Oxygen XML editor that allows for easy transformations via XSL. I was going to do OOXML but settled on WordML. As a starting point I used roundtrip XSL, but I had to rewrite lots of templates because of existing bugs or just missing functionality. In addition, I did other customization to serve a purpose or for our XML file only.
I would not mind contributing back to the project, but don't really know how to get about it.
I know this is an 11 years old question. But now, in 2022 you can use pandoc to convert DocBook to MS Word (docx).
pandoc --from docbook --to docx --output filename.docx filename.docbook
I am using XQuery to transform DocBook into various formats using XQuery typeswitch library. XQuery uses indexes so I can transform many documents very quickly.
Sphinx supports a few output formats:
Multiple HTML files (with html or dirhtml)
Latex which is useful for creating .pdf or .ps
text
How can I obtain output in a Microsoft Word file instead?
With another doc generator I managed to generate a single html output file and then convert it to Microsoft Word format using the Word application.
Unfortunately I don't know a way to generate either Word or the HTML single-page format.
The solution I use is singlehtml builder like andho mentioned in the comment, then convert the html to docx using pandoc.
The following sample assumes the generated html would be located at _build/singlehtml/index.html
make singlehtml
cd _build/singlehtml/
pandoc -o index.docx index.html
There is a Sphinx extension for generating docx format (which I haven't tested) and a newer one (which I also haven't tested, but looks like it is more actively maintained)
To convert files in restructured text to MSdoc, I use rst2odt and next unoconv. Look next script:
#!/bin/sh
rst2odt $1 $1.odt
unoconv -f doc $1.odt
rm $1.odt
With rst2odt you can use your own stylesheet: unoconv comes with OpenOffice and also allows to apply an Open Office style (template) during the conversion. Simply edit a converted document, change styles, add headers and footers, save that as an ODF Text Document Template (OTT) and use this as part of the conversion, like:
unoconv -f doc -t template.ott $1.odt
to use that template for various conversions later on.
I realize this is an old question, but I found that LibreOffice supports the following way of doing conversion (assuming soffice.exe is in your path):
soffice.exe --invisible --convert-to doc myInputFile.odt
Some things I have read say to use the --headless option rather than --invisible. Both seem to work on Windows.
You can start with the rst2odt.py script and then do the above to convert to an MS Word document.
Here is a link with additional start up options for LibreOffice:
http://help.libreoffice.org/Common/Starting_the_Software_With_Parameters
Here is a link with file types supported by OpenOffice which, I believe, LibreOffice should also support:
http://wiki.services.openoffice.org/wiki/Framework/Article/Filter/FilterList_OOo_3_0
This answer is not a command line solution and it is not obviously the best, but it simply works for me and save my time. After generating html file 1, you can open the generated html with a browser and copy the entire page (Crtl + a and Ctrl+ c) and then run Microsoft Office(or use live version if you don't have Microsoft Windows, like me) and paste (Ctrl+v) to it.
The best option might be rst -> odt -> doc
Convert the sphinx documents into openoffice format.
Then convert open the odt with openoffice and saved to Word. But I don't know how to do this automatically.
This is a workaround using Calibre (https://calibre-ebook.com), which includes a powerful converter. This worked well and most of the formatting are preserved:
Generate epub output in Sphinx make epub
Import epub output into Calibre and then convert epub to docx using inbuilt ebook converter.
Answer is too late for the original question, but people looking at the same problem may find this useful.
I don't now what Sphinx is, but you could create a rtf file or html file or something similar.
See the following blogpost for more information/approaches : OFFICE AUTOMATION
and from there : How to use ASP to generate a Rich Text Format (RTF) document to stream to Microsoft Word
This article describes how you can generate Rich Text Format (RTF) files with ASP script and then stream those files to Microsoft Word. This technique provides an alternative to server-side Automation of Microsoft Word for run-time document generation.
You don't use ASP script (who does :-) ), but for the idea.