I m doing Facebook integration with my project.But accidentally Social.Framework and AdSupport.framework got deleted from project's Build Phases.How can I get them back.Is there a way to add them externally ?
Go to your Trash, copy back those two frameworks, and paste them at you Framework path like:
/Library/Developer/Xcode/iOS DeviceSupport/6.0.1 (10A523)/Symbols/System/Library/Framework
Past them both there.
Download these two Frameworks from below link:
http://www.sendspace.com/file/b0fifp
Related
I want to use google map to existing(not a new one) iPhone project.Now i am using Google map ios sdk and i successfully added google map framework to my project.But i got error like this
ld: framework not found GoogleMaps
clang: error: linker command failed with exit code 1 (use -v to see invocation)
How to solve this issue.I am using xcode4.5 and google map iOS sdk version is 1.5. When i am creating new project with google map iOS sdk then no error getting for me.Error only for existing iOS Project.Please help me.
I solved my issue
You need to do this
Click on your project (targets)
Click on Build Settings
Under Framework search paths (set your framework path)
Following information for getting framework search paths
Right click on your framework folder (for ex: GoogleMaps.framework)
select Get info
copy the path from General->where and paste this path in your framework search path (path should contain in single line)
Good luck
I encountered a scenario in which I had to import a project that was using Google Maps and noticed the same problem - module: "Google Maps" not found.
To solve this problem it was necessary to delete Podfile.lock and Podfile folder and re-install the pods again. Good luck !
You can also :
- remove GoogleMaps from Podfile
- pod install
- add GoogleMaps to your Podfile again
- pod install
This solution works for me, you can also check the search paths a well.
Clean your project. The shortcut is command + shift + k. This will clear information that xcode has stored that might imply that the sdk isn't included.
Also press the project icon at the top of the hierarchy of files, press the target that is your project, press build phases, open link with binary libraries, and make sure that the google maps sdk is in there. If it is not, press + and add it in.
Follow the steps :
Download GoogleMaps-iOS-1.1.0.zip from their site
Unzip the file. You now have a GoogleMaps-iOS-1.1.0 folder
In that folder you have a GoogleMaps.framework folder.
Copy or move the GoogleMaps.framework folder to inside your project folder (in Finder).
Drag the GoogleMaps.framework folder onto your Frameworks group in Xcode.
In the options sheet, uncheck "Copy items into destination group's folder". Make sure your target is checked in "Add to targets". Click OK.
(Note that you can also do this the other way, by not copying it into your project folder and checking "Copy items into destination group's folder". Xcode will copy the folder itself.)
Import using #import "GoogleMaps/GoogleMaps.h". The angle bracket usually work too, but in this case it should use quotes.
From : <GoogleMaps/GoogleMaps.h> file not found Google Maps SDK for iOS
my problem was fixed by adding in:
build settings
Framework Search Paths
clickable and add the following lines:
"${PODS_ROOT}/GoogleMaps/Base/Frameworks"
"${PODS_ROOT}/GoogleMaps/Maps/Frameworks"
If you use Pods
Left menu > Pods > Pods > choose Framework > right menu > copy path from "ios/....."
My: ios/Pods/GoogleMaps/Maps/Frameworks/GoogleMaps.framework
Then Project > Build Setting > Framework Search Path > Click on
$(PROJECT_DIR)/ios/Pods/GoogleMaps/Maps/Frameworks/GoogleMapsCore.framework
Sometimes it happens when you are migrating the code from one system to another so your Framework search paths look empty at this moment, so one simple solution I try is to reinstall the podfile and it works for me.
I've been struggling with this issue for hours; I'm using CocoaPods, Swift and Xcode 6.1.1. I followed all the steps for including GoogleMaps in my project carefully, tried many different things like removing symbolic links in the downloaded package or manually linking the binaries in build phases or trying #include "GoogleMaps.h", #include "GoogleMaps/GoogleMaps.h" and "#include <GoogleMaps/GoogleMaps.h> in my bridge file, none of that worked... Finally used CocoaPods instead of including the framework myself and it worked! Hope it helps someone out there:
In the Podfile:
pod 'Google-Maps-iOS-SDK', '~> 1.9.2'
And in your Bridge file:
#import "GoogleMaps.h"
Delete derived data and delete Podfile.lock file and then run pod install.
Maybe it'll be useful for anybody, next steps helped me:
1. Delete "Headers" and "GoogleMaps" folders manually (from the Finder).
2. Run 'pod install'
3. Re-build the project in Xcode.
In my case, I forgot that I need to open the workspace file with pods, not the project.
I have gone through this document :Getting Started with the Facebook SDK for iOS v3.1
I have successfully configured my Xcode project by following it.
But I want to do it without adding the Facebook.framework.
As previously we used to only add the "src" folder which we used to clone from :Facebook SDK for iOS - Github. Why can't I just copy the "src" folder and configure my project.
I want to play around with FBFriendPickerViewController.m (dot m) file. Which I am not able to view if I follow the standard tutorial. But is available in the "src" folder.
Please how can I do that ? And it also seems that FbGraph.h file doesn't exist.
Please help.
If you want to play with the source, go to:
https://github.com/facebook/facebook-ios-sdk/
After getting the code, run this script to build the framework locally:
<Install Location>/scripts/build_framework.sh
This will drop the framework in the folder:
<Install Location>/build
Follow the same instructions in the Getting Started to include the Facebook SDK, however, you will get the framework from your local build folder.
Note: You'll likely have to modify the build search path in Xcode if you're swapping out, say one of the sample projects (that was looking for the Framework in a particular place).
I am new to this iPhone development and i have almost completed my first application but when i try for creating an archive it gives an error lexical or preprocessed issue file not found But it runs fine in simulator and also has also tested on device. I have included SDwebimage architecture for lazy loading of image in table view.Can any tell me what is the issue?
Few things to try, Ensure the Framework and all it's headers are imported into your project properly.
Also in your Build Settings set YES to Always search user paths, and make sure your User header paths are pointing to the Framework.
Finally, Build->Clean and Restart Xcode.
Hope this helps !
UPDATE: According to SDWebImage's installation, it's required you make a modification to Header Search Path and not User header paths, As seen below.
Have you done this as well? I suggest slowly, re-doing all the installation steps from the beginning.
Spaces in a folder name in your header search path can cause this problem. Make sure the folders in your project do not have spaces in their names.
My project was building fine until I updated to Xcode 10.1. After the Xcode update, started getting Lexical or preprocessor Issue errors on build. Some XCDataModel header files could not be found.
This fixed the issue.
Go to Build Settings, Header Search Paths
Change the appropriate value from $(SRCROOT) non-recursive to recursive.
This ensures that subfolders are also searched for headers during build.
I had this same issue now and found that my sub-projects 'Public Header Folder Path' was set to an incorrect path (when compared with what my main project was using as its 'Header Search Path' and 'User Header Search Path').
e.g.
My main project had the following:
Header Search Paths
Debug "build/Debug-iphoneos/../../Headers"
Release "build/Debug-iphoneos/../../Headers"
And the same for the User Header Search Paths
Whereas my sub-project (dependency) had the following:
Public Header Folder Path
Debug "include/BoxSDK"
Release "include/BoxSDK"
Changing the 'Public Header Folder Path' to "../../Headers/BoxSDK" fixed the problem since the main project was already searching that folder ('../../Headers').
PS: I took some good screenshots, but I am not allowed to post an answer with images until I hit reputation 10 :(
I had this problem after changed project name. I used all the methods mentioned on the internet but still doesn't work. Then I realized that all the header files not found was from cocoapods, so I re-installed the cocoapods using pod install, and thus solved the problem.
Hope this could help.
In my case I was developing a framework and had a test application inside it, what was missing is inside the test application target -> build settings -> Framework Search Paths:
The value needed to be the framework path (the build output - .framework) which is in my case:
"../FrameworkNameFolder/" - the 2 points indicates to go one folder up.
Also, inside the test application target -> Build Phases -> Link Binary With Libraries:
I had to remove the framework file, clean the project, add the framework file again, compile and this also solved the issue.
The new version contain fix for this, feel free to update.
Or you can just replace
#include "iPhone_View.h"
with
#if UNITY_VERSION < 450
#include "iPhone_View.h"
#endif
Delete the unit testing from your project follow the below steps this will solve the issue.
select your project from the project navigator to open the project editor. From the target delete the test from the left side of the project editor and press the Delete key.
I know this is old, but I'm gonna chime in anyway because it may be useful to someone. If you can still see the file in Finder, then click on the file in your project and delete it, selecting "remove references" and not "move to trash".
Once the reference is removed, drag and drop the file from finder into your project again and it should sort itself out.
Just adding another thing that worked for me :
react-native link
Evidently my ReactNative files were no longer there. I could figure that out by clicking on
Build Phases -> Link Binary with Libraries ->
Then right clicking a file I knew was responsible for React, and clicking Show In Finder .
But nothing opened. So assuming the library went missing, I just ran the above command which relinked everything again.
Also if you havn't, try :
rm -rf node_modules/ && npm install
This happened to me after I renamed a file. For some reason it was still looking for the file with the old name. What I did was create the file that it was complaining about and added to the project. Then I did a Project->clean, then Project->Build and verified the error was gone. Then I selected the newly added files and deleted them. This removed all references and I no longer see the error.
I fixed mine. The fb sdk downloaded (from my browser) as 'FacebookSDKs-iOS-4.22.0' -- I just had to rename the folder to FacebookSDK. So now in Build
Settings --> Framework Search Paths
the path looks something like /Users/.../Documents/FacebookSDK (where as before it was /Users/.../Documents/FacebookSDKs-iOS-4.22.0)
Hope this helps!
For what it's worth, my problem was completely unrelated to the error Xcode was giving. I stumbled onto a solution by deleting the .h reference, compiling, adding the reference back and compiling again. The actual error then became evident.
I am almost ready to release my iphone app. I use restkit for consuming my webservice. When I archive, it fails with this error:
cp: /Users/myusername/Library/Developer/Xcode/DerivedData/project-name-/ArchiveIntermediates/project-name/IntermediateBuildFilesPath/UninstalledProducts/include/RestKit: No such file or directory
I dragged & dropped restkit into the project. It builds and works fine in debug mode. I am guessing it is unable to locate restkit dir while archiving. But I am not sure why. Any thoughts?
I've had trouble linking with my own framework in the past, but I have a procedure that works. Even though I don't understand it, it works so I follow it like voodoo, and I don't risk angering the gods by asking too many questions.
Here's what I'd try on your project (again, partly voodoo here):
Navigate to the Frameworks folder in the project nav, select the RestKit and delete it with the delete key. Just delete references.
Using Finder, option-drag (copy) the framework from wherever you first got it
(~/Downloads, or another project or wherever) into your project directory, replacing files if prompted.
Back in your project, select the project, then the target, then build phases.
Open the link binary section, hit "+", then the "Add Other.." button on the bottom of the dialog
Browse to the framework you copied in in step 2.
See if you can clean, build, archive. Easy enough to try, and no livestock are harmed. Hope it works for you.
I am developing an iphone application which has some facebook integration in it.I added the fbconnect folder which i downlaoded from internet and added #import "FBConnect/FBConnect.h".
But when i run the app it shows a lot of errors like
"FBConnect/FBConnect.h" no such file or directory
"FBConnect/FBsession.h" no such file or directory etc.
I downloaded some facebook projects that works fine But what can be the problem with mine?
Your header search path is not correct.
In your header search paths write ../src/ & place your facebook connect downloaded source in the same folder in which your project is kept.It should work then.
I’m not sure if there are other, easier ways, but I do this using the Header Search Paths setting (right-click on the target, Get Info, select the Build tab and filter for Header). There you have to enter the path to the Facebook SDK so that the compiler sees the FBConnect directory.
I got a solution from the above answer for this but i want to give all details about this so others can benifit .
First download a fbconnect project from this site
Then make your own facebook project and save the downloaded project folder in the same directory as your project
Then go to target>get info>Build>header search and make a new field as ../src(or whatever you name the downloaded project folder)
Drag the Fbconnect folder to your xcode and mark the copy check box (It must include the FBConnect bundle)
Run.