I need to see the request/response to a mongo server. MongoDB has an application called "mongosniff", but it isn't available on windows.
What is my alternative? Fiddler?
mongosniff isn't included with the binary download for Windows, but you can compile it yourself if you are patient and so inclined. You will need to install developer tools including Git for Windows, Scons, and the WinPcap developer's pack so this certainly isn't a quick path.
I would instead recommend downloading Wireshark which is a cross-platform network protocol analyzer. In fact, I would recommend using Wireshark in preference to mongosniff even if you aren't using Windows.
Wireshark also uses the WinPcap library and provides a much more comprehensive user interface than mongosniff as well as a huge selection of supported protocols including the Mongo Wire Protocol.
Fiddler is a web proxy for debugging HTTP/HTTPS traffic, and isn't directly relevant to the Mongo Wire Protocol. You could use Fiddler to inspect a web interface (eg. REST API), but it does not decode lower level protocols.
Related
For one of my application, I have implemented Web socket using socket.io and hosted in IIS. Currently socket connection helping to provide two way connection between client (React) and server (node.js).
As I mentioned, I have hosted my application in IIS. I have few doubts regarding Turn Windows features on or off -> Internet Information services -> World wide Web Services -> Application Development Features -> WebSocket Protocol. I have tested my application without enabling this feature, its working fine, but I would like to confirm below stuffs.
WebSocket Protocol
Do I really need to enable WebSocket protocol feature to make websocket work in my application? If so, how now it is working fine without enabling (I haven't do performance and stress testing, I may face issue on this).
What if I not enabling this feature? in short what is the actual use of this feature?
It would be helpful if anyone answer the above questions. Thanks in advance.
WebSocket as part of the HTTP stack requires a bunch of things to be ready on Windows (across multiple components), so hope this answer helps a little.
HTTP.sys, a driver deep down in Windows OS, is upgraded to support the necessary packet communication required by the protocol.
The IIS WebSocket module, an IIS extension which many other Microsoft frameworks (like SignalR) depend on.
So WebSocket support is by default on in HTTP.sys, and you don't need the IIS module if your framework (socket.io) has no dependency there.
Note that the "Summary" section provides several useful links,
https://learn.microsoft.com/en-us/iis/get-started/whats-new-in-iis-8/iis-80-websocket-protocol-support#summary
and the same article also reveals that IIS WebSocket module has
conflicts with socket.io.
I see GNU EFI is a tool chain to compile applications, but it doesn't seem to come with many libraries.
Tianocore EDK2 comes with a lot of code, with modules and drivers that I'm still figuring out. By default, it builds a full firmware image that I use as a BIOS.
What I need to do is, develop a network-capable application that will query a server for boot instructions, and then prepare the next steps. The idea is to control the boot process from the management server, so the client should be able to follow the instructions to boot from TFTP, or from local storage, or update local storage etc.
You have two main options for writing UEFI network applications.
Managed Network Protocol has the firmware trying to autoconfigure your network and download files as appropriate via TFTP/PXE or HTTPS.
Simple Network Protocol gives you raw access to a packet interface if you want to handle things yourself.
I have the task of implementing iot device management using Eclipse Leshan. I have difficulty understanding how Eclipse Leshan works in connecting IOT sensors with servers and cloud. Is it true if I declare that Eclipse Leshan does not require a gateway like Eclipse Kura to connect into server and cloud?
Does anyone know where the complete documentation about Eclipse Leshan is? it would be very helpful if there were examples of programs in implementing the eclipse leshan.
Thank you
Eclipse Leshan is a library for implementing applications that use the LWM2M protocol to manage devices. As such, your application can use Leshan's Java API in order to interact with devices that also support LWM2M.
LWM2M does not per se mandate a transport protocol. However, the spec is written assuming that CoAP over UDP is used for that purpose. In fact, the LW in LWM2M stands for Lightweight and as such, using CoAP as the transport protocol makes a lot of sense for managing constrained devices.
Eclipse Leshan itself does not connect to a server or cloud but instead is usually part of an application that is hosted on a server (on the cloud). However, you need to implement that application yourself because Leshan, as indicated above, is just a library. The devices then interact with your LWM2M enabled application. Because CoAP/UDP uses standard IP, this interaction can occur over public internet infrastructure if desirable in your use case, i.e. no gateway is necessarily needed. You can, however, also connect your devices to a local gateway, e.g. Kura, and then connect the gateway to your LWM2M server in the cloud instead. It really depends on your use case and the capabilities of the devices.
I'm confused by the GAE documentations. It says App Engine supports sockets without requiring you to import any special App Engine libraries or add any special App Engine code. but it seems misleading as just above it says App Engine supports outbound sockets through the appengine/socket package.
I would like to connect to an IMAP server using the standard net package. Is that possible or I'm stuck with the GAE sockets API?
https://cloud.google.com/appengine/docs/go/sockets/
It is not possible to open an outbound socket without going through the appengine/socket api. This is because it works through RPC and an appengine.Context is needed to do that. You can still use the IMAP library you linked, though, as it provides a function to create a client with a given net.Conn. You can get a net.Conn from appengine/socket and pass it to NewClient to do your business. The reason it works on python and java is because they both use thread local memory to manage request state implicitly, whereas the go runtime does not.
Nothing stops you from connecting to an Imap server, since you will initiate an outbound connection. For java, the standard java mail packages work out of the box.
Only for paid apps though, i.e. you need to have billing enabled.
Can someone give me simple code to help with creating an HTTP server for the iPhone. Something simple with much documentation would be appreciated. Anything you have please share.
There are sample codes from Apple and open source community such as cocoahttpserver TouchHTTPD.
Here's a summary blog
Another open-source HTTP server for iPhone is the lightweight GCDWebServer which is built on top of Grand Central Dispatch. It's only a few source code files and offers a simple and extensible API.
If you're unfamiliar with network programming your best bet is to first read Beej's Guide to Network Programming and then read the HTTP 1.1 spec before you look at source code (as you should have an understanding of the protocol before you start looking at implementations).
A simple Google search turned up cocoahttpserver and iSpit. Otherwise, you could download Apache and look at its source code, but that's not exactly a simple implementation.
It is possible to run a simple file server on iPhone/iOS.
I was able to use this method successfully. Here are the steps to create a simple file server which works on http protocol.
1. Install TestFlight app for iOS
2. Install iSH app from the Apple store or side load it from their website, as this app might not be available in the store depending on your country. I tried it from india in May 2020, and the app was not available in the store. So i did side load it from their website.
3. With iSH app, one has access to linux kernel of the iPhone. I did use a simple http server module from python and executed it on the linux shell.
4. Command to run the python based server on iPhone :
Python -m http.server 8080
5. Access the file server using the local ip that’s assigned to the iPhone in the network you are connected to. That means, if iPhone is connected to a WiFi SSID, depending on whether the router is configured to use static IP address assignment based on MAC address or using DHCP protocol, your iPhone will have an internal IP assigned by the router.
6. Command to access the file server :
http://192.168.1.3:8080 - modify the address depending on IP address of the iPhone and the port that server running on iPhone is configured to use. Paste this in a browser - one should be able to see the files listed in the directory where the server is running in.
Hope this was clear enough, for running a simple http based file server on iPhone using http.server module in python, over linux shell of the underlying kernel, using iSH.