I don't understand something about SoapUI and his mockservice's behaviour.
I'm using the client of SoapUI (testcase) and a Java EE application with JAX-RPC.
My problem is :
when I'm trying to call any webservice, from my Java Client, or the testcase of SoapUI, the mockservice return a well message at first call, and the error below at the second call, with the same call or not.
But if I'm waiting, It works ...
So, I have enabled the option in SOAPui : "close HTTP connection after each SOAP request" and it works all the time...
So my question is :
"Is it a normal behaviour of the mockservice, and how to implement this with my java client ?"
Thank you all.
<soapenv:Fault>
<faultcode>Server</faultcode>
<faultstring>Missing operation for soapAction [] and body element [null] with SOAP Version [SOAP 1.1]</faultstring>
</soapenv:Fault>
OK,
I found a solution on the forum of SoapUI : http://www.soapui.org/forum/viewtopic.php?t=5648
It is when you have the settings flag "HTTP Settings/Logs wire content of all mock requests" set to true.
=> Uncheck the flag and it works fine!
Thanks a lot !
I had the same problem, using SoapUI 5.1.2 Pro.
After receiving first asynchronous response to the MockService, the MockService
stopped and could not receive any more responses for the request I sent.
The error message was:
Thu Jul 02 12:59:44 CEST 2015:ERROR:An error occurred [Missing operation for soapAction [XXXX] and body element [null] with SOAP Version [SOAP 1.1]], see error log for details
In SoapUI Settings:
File->Preferences->Http Settings: "Enable Mock HTTP log", uncheck box:
"Logs wire content of all mock requests".
Now I receive several asynchronous responses in a row, and give response back on them.
The same problem may happen when two mock services run with the same endpoint address (including port and path) on SoapUI.
Related
when I use https in play framework it shows like this
WARN akka.actor.ActorSystemImpl akka.actor.ActorSystemImpl(play-dev-mode) Illegal request, responding with status '400 Bad Request': Unsupported HTTP method: The HTTP method started with 0x16 rather than any known HTTP method from 127.0.0.1:45436. Perhaps this was an HTTPS request sent to an HTTP endpoint?
if anyone know how to use HTTPS in play framework,please explain the steps properly.
i can't clearly understad the documentation
instead of "sbt run" we need to use "sbt run -Dhttps.port=9443 -Dhttp.port=disabled"
and it runs in port number :9443
I am trying to send the mail through jmeter for failed http request, I want to know the sampler details like name of http request?
I have added if controller to check the assertion of previously running request sand send a mail if it fails.It gives me error message
"Message from Jmeter thread # Test failed: code expected to match /200/"
But I want to know the name of http request which has been failed so i can know specifically which request is failing?
You can use JSR223 PreProcessor to get the previous sampler details using the following code:
def sampler = ctx.getPreviousSampler()
Example usage:
def previousSamplerName = ctx.getPreviousSampler().getName()
log.info("Failed sampler name: " + previousSamplerName)
vars.put("SamplerName", previousSamplerName)
Demo:
If everything goes fine you will be able to access previous sampler name as ${SamplerName} in the SMTP Request sampler
ctx is a shorthand to JMeterContext class instance, see the JavaDoc for available methods and fields
vars is a shorthand to JMeterVariables class instance, it provides read/write access to all JMeter Variables in scope.
Also check out Groovy Is the New Black guide to get familiarized with using Groovy in JMeter tests.
I'm invoking a REST service from an OSB Proxy Service, which is working fine if the rest service response is a valid response, i.e., there's no errors. However if the rest service replies with an http error code (e.g. 400 Bad Request), I'm not able to capture anything else except the http error code:
$fault variable in OSB:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-382502</con:errorCode>
<con:reason>
OSB Service Callout action received an error response
</con:reason>
<con:details>
<con1:ErrorResponseDetail xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config">
<con1:http-response-code>400</con1:http-response-code>
</con1:ErrorResponseDetail>
</con:details>
<con:location>
<con:node>PipelinePairNode1</con:node>
<con:pipeline>PipelinePairNode1_request</con:pipeline>
<con:stage>stage1</con:stage>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
But the rest service, is not only replying with 400 Bad Request, but also adding a message:
<Error>
<Message>The message header contains an invalid brand code.</Message>
</Error>
Which I'm not able to process in my proxy service. Does anyone knows if it is possible to access this message details in OSB or is it a limitation?
The rest service is clearly sending the message, because invoking it directly through soap-ui I'll get the following response:
HTTP/1.1 400 Bad Request
Cache-Control: no-cache
Pragma: no-cache
Content-Length: 84
Content-Type: application/xml; charset=utf-8
Expires: -1
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Mon, 09 Feb 2015 16:15:32 GMT
<Error><Message>The message header contains an invalid brand code.</Message></Error>
Thanks
I've just found out this is an OSB bug, in case of an HTTP Error code 400 being returned, if the http-content is "Application/XML" the message is ignored.
Oracle released a Patch at the end of last month to fix this issue, which I've tested and it works. I can get the message details in the $body variable now.
Patch: 16986497
If I understand your question, you want to get in addition to the http code, the message error?
I think you should use, in your message flow, an errorHandler , so that you can catch the error and do whatever you want with.
The proxy service operation selection algorithm cannot determine the operation name from the request or returns an invalid operation (one which is not in the WSDL or null). Possible reasons include the following:
An error occurs while computing the operation.
The operation selection algorithm returns null.
The operation selection algorithm returns an operation that is not of the of the operations declared by the WSDL.
Source
When running GWTTestCase that call an external Restful service with GWT (Using Restlet-GWT) the app throws the error below.
Error:
Jan 05, 2015 1:24:41 PM com.gargoylesoftware.htmlunit.javascript.background.JavaScriptJobManagerImpl runSingleJob
SEVERE: Job run failed with unexpected RuntimeException: Wrapped java.lang.RuntimeException: No permitted "Access-Control-Allow-Origin" header.
net.sourceforge.htmlunit.corejs.javascript.WrappedException: Wrapped java.lang.RuntimeException: No permitted "Access-Control-Allow-Origin" header.
at net.sourceforge.htmlunit.corejs.javascript.Context.throwAsScriptRuntimeEx(Context.java:1889)
at com.gargoylesoftware.htmlunit.javascript.host.xml.XMLHttpRequest.doSend(XMLHttpRequest.java:681)
at com.gargoylesoftware.htmlunit.javascript.host.xml.XMLHttpRequest.access$000(XMLHttpRequest.java:94)
at com.gargoylesoftware.htmlunit.javascript.host.xml.XMLHttpRequest$1.run(XMLHttpRequest.java:603)
at net.sourceforge.htmlunit.corejs.javascript.Context.call(Context.java:602)
at net.sourceforge.htmlunit.corejs.javascript.ContextFactory.call(ContextFactory.java:507)
at com.gargoylesoftware.htmlunit.javascript.background.JavascriptXMLHttpRequestJob.run(JavascriptXMLHttpRequestJob.java:36)
at com.gargoylesoftware.htmlunit.javascript.background.JavaScriptJobManagerImpl.runSingleJob(JavaScriptJobManagerImpl.java:328)
at com.gargoylesoftware.htmlunit.javascript.background.DefaultJavaScriptExecutor.run(DefaultJavaScriptExecutor.java:162)
at java.lang.Thread.run(Thread.java:744)
Caused by: java.lang.RuntimeException: No permitted "Access-Control-Allow-Origin" header.
... 9 more
From my research this seems to be an issue that HTMLUnit would not allow to access Cross-domain, is there a work around with this?
You can add the support of CORS to your application.
A support has been provided in 2.3 release of the Restlet framework (cf http://restlet.com/technical-resources/restlet-framework/guide/2.3/introduction/whats-new/2.3).
If you are using the 2.2 release, and because we won't add this feature to 2.2, you can add the required classes in your own code manually (cf https://github.com/restlet/restlet-framework-java/blob/2.3/modules/org.restlet/src/org/restlet/service/CorsService.java, https://github.com/restlet/restlet-framework-java/blob/2.3/modules/org.restlet/src/org/restlet/engine/application/CorsFilter.java, and https://github.com/restlet/restlet-framework-java/blob/2.3/modules/org.restlet/src/org/restlet/engine/application/CorsResponseHelper.java).
I was stumped by this very same error response but I am not able to refactor the Restlet framework into my client & server codebases.
A couple of tips for handling diagnosis of the problem.
use a proxy or inspect dev tool to record the exact headers within the request and response for both the OPTIONS and GET/POST pairs.
OPTIONS request header "Origin" must match response header "Access-Control-Allow-Origin" exactly. No wildcards. Perhaps write your response to just echo the request like:
response.addHeader("Access-control-allow-origin", request.getHeader("Origin"));
Your request header names must be fully enumerated within the OPTIONS "Access-control-request-headers" header value AND match the "Access-control-Allow-Headers" response header.
Note: that a mismatch in #3 will trigger the same error message as a mismatch in #2.
Pre-info:
I'm learning to use orchestration of web methods(WM). I've sucessfully completed lessons with assings, invoking web methods, some parallel processing in BPEL. I'm using Eclipse Indigo 3.7.1 with BPEL plugins, Tomcat7 server with Apache Ode as orchestration base. At other side I need to learn calling secured WMs written on Mono .Net platform.
Having now:
Now I'm having problem calling ANY web methods. I've made:
1) Web Method running by Mono .Net - works, can be tested with browser (http://localhost:8081/hwws.asmx ) and with Eclipse tool "Web Services Explorer", it works fine.
2) my BPEL that only invokes this .Net web method throught SOAP port.
3) at other work stantion I've made .Net service with Visual Studio. Having errors either, if need I'll post it text later.
Problem: I'm getting errors at invoking.
Screens:
1) browser test of .net WS HW(helloWorld) http :// photo -hosting.winsoftmagic .com/ 1/ s4nbwdsqib.jpg
2) Eclipse test of .net WS HW http://photo-hosting.winsoftmagic.com/1/zywnl2wtgu.jpg
3) Error I get http://photo-hosting.winsoftmagic.com/1/ltbexoxcdl.jpg
Error listing:
18:15:25,294 WARN ExternalService Fault response: faultType=(unkown)
soap:ClientCould not deserialize Soap message
18:15:25,376 ERROR INVOKE Failure during invoke:
18:15:25,382 INFO BpelRuntimeContextImpl ActivityRecovery: Registering activity 11, failure reason: on channel 21
And it's give timeout error later. I've spent a week around this problems already, searched with all ways I could think up.
EDIT 12.03.2012:
Now test with mono WS worked for some reason.
I've tryed call WS from the internet and it gave the same error as I had at work spot:
14:25:16,177 ERROR [INVOKE] Failure during invoke: Error sending message (mex={PartnerRoleMex#hqejbhcnphr747jefui9ic [PID {http://wsaspx.tns/}inetWS-24] calling org.apache.ode.bpel.epr.WSAEndpoint#1e3a4c7.checkText(...) Status ASYNC}): The input stream for an incoming message is null.
14:25:16,178 INFO [BpelRuntimeContextImpl] ActivityRecovery: Registering activity 11, failure reason: Error sending message (mex={PartnerRoleMex#hqejbhcnphr747jefui9ic [PID {http://wsaspx.tns/}inetWS-24] calling org.apache.ode.bpel.epr.WSAEndpoint#1e3a4c7.checkText(...) Status ASYNC}): The input stream for an incoming message is null. on channel 21
In same time this service works from all test forms.
Edit: 16.03.2012
My mono method stopped work same as it started without my understanding. TcpMon-1.1.jar shows such message again:
POST /hwws.asmx HTTP/1.1
Content-Type: text/xml; charset=UTF-8
SOAPAction: "http://hwws.tps/HelloWorld"
User-Agent: Axis2
Host: localhost:8092
Transfer-Encoding: chunked <--- EDITED: REASON OF NOT WORKING ----
31c
<?xml version='1.0' encoding='UTF-8'?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
<addr:To xmlns:addr="http://www.w3.org/2005/08/addressing">http://localhost:8092/hwws.asmx</addr:To>
<addr:Action xmlns:addr="http://www.w3.org/2005/08/addressing">http://hwws.tps/HelloWorld</addr:Action>
<addr:ReplyTo xmlns:addr="http://www.w3.org/2005/08/addressing"><addr:Address>http://www.w3.org/2005/08/addressing/anonymous</addr:Address></addr:ReplyTo>
<addr:MessageID xmlns:addr="http://www.w3.org/2005/08/addressing">uuid:hqejbhcnphr74k7fapcntd</addr:MessageID>
</soapenv:Header>
<soapenv:Body><HelloWorld xmlns="http://hwws.tps/">
<s0:st xmlns:s0="http://hwws.tps/">My test message</s0:st>
</HelloWorld></soapenv:Body></soapenv:Envelope>
0
HTTP/1.0 500 Internal Server Error
Date: Fri, 16 Mar 2012 08:01:50 GMT
Server: Mono.WebServer2/0.4.0.0 Unix
Connection: close
X-AspNet-Version: 4.0.30319
Content-Length: 366
Cache-Control: private
Content-Type: text/xml; charset=utf-8
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body><soap:Fault><faultcode>soap:Client</faultcode>
<faultstring>Could not deserialize Soap message</faultstring>
</soap:Fault></soap:Body></soap:Envelope>
Actually I get one of 3 errors: couldn't deserialise, The input stream for an incoming message is null or even error 411 yesterday:) P.s. had 4th error with no socket connecting also, but all them vanished.
My main goal is ssl+authorisation .net services - would be gratefull if you have examples.
Thanks a lot to everyone! It's real pleasure to see your help:)
Thanks to all, testing soap-body shown that it was good and problem was in headers part which had some strange "Chunked" and numbers before xml (length of xml text) and 0 after xml end. I just set http.request.chunk=false and now it work at all my tests yet. For that purpose download sample.endpoint from http://ode.apache.org/endpoint-configuration.html , renamed it as bpel name (MonoCaller.bpel => MonoCaller.endpoint). It has string for chunked already commented. And also added something like http.default-headers.authorization=Basic <64b code of "login:password" made in any coder> for authorization purpose and it also works now! :-]
The same error has occured with me, the problem was with the web service itself, I had an empty constructor plus the methodes wich causes a problem, the solution is to delete the constructor.