I created one channel in mirth environment..in this channel i wrote javascript code for creating two dynamic log files.. whenever i start the channel files were created but the mirth connect is hanged (no more come to normal state, i am restarting every time).. plz help me....
----logs.properties file-----
log4j.rootLogger=DEBUG
log4j.logger.DEFAULT_LOGGER=INHERIT, A1
log4j.logger.PROCESS_LOGGER=INHERIT, A2
log4j.appender.A1=org.apache.log4j.RollingFileAppender
log4j.appender.A1.File=c://test//${cname}//${fname}.log
log4j.appender.A1.layout=org.apache.log4j.PatternLayout
log4j.appender.A1.maxFileSize=100KB
log4j.appender.A1.maxBackupIndex=10
log4j.appender.A1.layout.ConversionPattern=%d{yyyy-MMM-dd HH\:mm\:ss,SSS} [%t] %c %x%n %-5p %m%n
log4j.appender.A2=org.apache.log4j.RollingFileAppender
log4j.appender.A2.File=c://test//${cname}//${fname}_ack.log
log4j.appender.A2.layout=org.apache.log4j.PatternLayout
log4j.appender.A2.maxFileSize=100KB
log4j.appender.A2.maxBackupIndex=10
log4j.appender.A2.layout.ConversionPattern=%d{yyyy-MMM-dd HH\:mm\:ss,SSS} [%t] %c %x%n %-5p %m%n
------javascript code--------
importPackage(Packages.org.apache.log4j);
var channelName = Packages.com.mirth.connect.server.controllers.ChannelController.getInstance().getDeployedChannelById(channelId).getName();
var currentDate = DateUtil.getCurrentDate("yyyyMMdd");
Packages.java.lang.System.setProperty("fname", currentDate);
Packages.java.lang.System.setProperty("cname", channelName);
PropertyConfigurator.configure("C:/Program Files/Mirth Connect/conf/custom/logs.properties");
var logger1 = Logger.getLogger("DEFAULT_LOGGER");
var logger2 = Logger.getLogger("PROCESS_LOGGER");
logger1.info("default");
logger2.info("process");
You might have restrictions applied to the instance of the Mirth Connect to write a file, try to surround your code as follows:
var controller = Packages.java.security.AccessController.doPrivileged(
Packages.java.security.PrivilegedAction(
/* Your code goes here */
)
);
Alternatively, you can create two separate Log channels with File Writer destinations and route what you need to log there.
Related
new to Mirth, not new to engines... finding it a bit challenging to do a basic source to destination HL7v2 transformation.
I've set up my Channel to read from a file as the source, and spit out the destination to a file as well. My output template is ${message.encodedData}. The channel seems to be reading the source correctly, and generating an output. But what I'm struggling with is how cumbersome this is.
I'm playing with an HL7 SIU message, my source has a lot more fields than the destination wants to receive, just need a simple way to map the few fields that are required.
I inserted the source system message template into the Destination Transformer Inbound Message Templates, then I'm doing the following which seems to work:
//MSH Segment
if (msg['MSH'][0]){
var MSH1 = msg['MSH']['MSH.1'];
var MSH2 = msg['MSH']['MSH.2'];
var MSH7 = msg['MSH']['MSH.7'];
var MSH9 = msg['MSH']['MSH.9'];
msg['MSH'] = '';
msg['MSH']['MSH.1']=MSH1;
msg['MSH']['MSH.2']=MSH2;
msg['MSH']['MSH.7']=MSH7;
msg['MSH']['MSH.9']=MSH9;
}
Rinse and repeat for the segments that I need, seems very painful to me.
On a second destination, I'm trying to leverage the Inbound and Outbound Message Template. Inserted the source system template as above, inserted the destination system template in Outbound Message Template.
My Javascript for that one looks something like this:
//MSH Segment
if (msg['MSH'][0]){
tmp['MSH'] = "";
tmp['MSH']['MSH.1'] = msg['MSH']['MSH.1'];
tmp['MSH']['MSH.2'] = msg['MSH']['MSH.2'];
tmp['MSH']['MSH.7'] = msg['MSH']['MSH.7'];
tmp['MSH']['MSH.9'] = msg['MSH']['MSH.9'];
}
It's cleaner, but doesn't seem to work properly, in some messages, my source doesn't have a PV1 segment, but the output contains the sample PV1 segment in the Output Message Template. Do I need to have an initial statement that is tmp = "";
There has to be a easier way to accomplish what I'm trying here, any advise is appreciated!
M
Eventually figured out a different route. Removed the outbound template entirely and built the outbound message from scratch. Here's a snapshot of what it looks like.
var output = <HL7Message/>;
//MSH Segment
createSegment('MSH',output);
output.MSH['MSH.1'] = msg['MSH']['MSH.1'];
output.MSH['MSH.2'] = msg['MSH']['MSH.2'];
output.MSH['MSH.7'] = msg['MSH']['MSH.7'];
output.MSH['MSH.9'] = msg['MSH']['MSH.9'];
//SCH Segment
if (msg['SCH'][0]){
createSegment('SCH',output);
output.SCH['SCH.1'] = msg['SCH']['SCH.1'];
output.SCH['SCH.2'] = msg['SCH']['SCH.2'];
output.SCH['SCH.6'] = msg['SCH']['SCH.6'];
output.SCH['SCH.7'] = msg['SCH']['SCH.7'];
output.SCH['SCH.8'] = msg['SCH']['SCH.8'];
output.SCH['SCH.11'] = msg['SCH']['SCH.11'];
output.SCH['SCH.12'] = msg['SCH']['SCH.12'];
output.SCH['SCH.16'] = msg['SCH']['SCH.16'];
output.SCH['SCH.25'] = msg['SCH']['SCH.25'];
}
var message = SerializerFactory.getSerializer('HL7V2').fromXML(output);
channelMap.put('outmsg',message);
And then in my destination, I use ${outmsg} for the Template.
I use the following configuration for my logger, in the conf file :
log4cplus.appender.TestLogAppender = log4cplus::TimeBasedRollingFileAppender
log4cplus.appender.TestLogAppender.FilenamePattern = %d{yyyyMMdd}.log
log4cplus.appender.TestLogAppender.MaxHistory = 365
log4cplus.appender.TestLogAppender.Schedule = DAILY
log4cplus.appender.TestLogAppender.RollOnClose = false
log4cplus.appender.TestLogAppender.layout = log4cplus::PatternLayout
log4cplus.appender.TestLogAppender.layout.ConversionPattern = %m%n
And in my code, I have the following initializing function for my logger, in which first, I load the configuration file, and then I wish to set the 'FilenamePattern' property to a new value, so that when I run multiple applications, each application will write to it's own log file:
void InitLogger()
{
ProperyConfigurator::doConfigure (L"LogConf.conf");
helpers:Properties prop(L"LogConf.conf");
props.setPropery(L"log4cplus.appender.TestLogAppender.FilenamePattern" ,
"Log/AppLogName.log.%d{yyyy-MM-dd}");
}
The problem is that when I run even one application, the log messages are written to the file as given in the original configuration file (in the 'FilenamePattern' property).
It seems the 'setproperty' didn't set the new value I gave it.
Is there a problem with my initializing logger function?
Have I used the setProperty method wrong?
You are obviously changing the properties after you have already configured the system, so your changes will be ignored. Do this instead:
helpers:Properties props(L"LogConf.conf");
props.setPropery(L"log4cplus.appender.TestLogAppender.FilenamePattern" ,
"Log/AppLogName.log.%d{yyyy-MM-dd}");
ProperyConfigurator propConf (props);
propConf.configure();
Is there a way to configure the Apache Tikka so that it only extracts the metadata properties from the file and does not access the content of the file. ? We need a way to do this so as to avoid reading the entire content in larger files.
The code to extract we are using is as follows:
var tikaConfig = TikaConfig.getDefaultConfig();
var metadata = new Metadata();
AutoDetectParser parser = new AutoDetectParser(tikaConfig);
BodyContentHandler handler = new BodyContentHandler();
using (TikaInputStream stream = TikaInputStream.get(new File(filename), metadata))
{
parser.parse(stream, handler, metadata, new ParseContext());
Array metadataKeys = metadata.names();
Array.Sort(metadataKeys);
}
With the above code sample, when we try to extract the metadata even the content is being read. We would need a way to avoid the same.
I am using NServiceBus 2.6.0.1504 on windows server 2003 32 bit.
The log file generated indicates that everything is getting wired up, but for some reason, "CreateBus()" returns null. Ignore my debugging code :)
SetLoggingLibrary.Log4Net(log4net.Config.XmlConfigurator.Configure);
var one = Configure.With(typeFinder.GetAssemblies());
var two = one.DefaultBuilder();
var three = two.MsmqSubscriptionStorage();
var four = three.XmlSerializer();
var five = four.MsmqTransport();
var six = five.IsTransactional(false);
var seven = six.PurgeOnStartup(true);
var eight = seven.UnicastBus();
var nine = eight.LoadMessageHandlers();
var ten = nine.ImpersonateSender(false);
var eleven = ten.CreateBus();
if (eleven == null)
throw new Exception("createbus");
var twelve = eleven.Start();
The exception with the message "createbus" always gets thrown.
This works on my dev box with is Windows Server 2008 R2 64 bit.
Here is my config for the web app.
<MsmqSubscriptionStorageConfig Queue="MedXChangeSubcriptions" />
<MsmqTransportConfig InputQueue="MedXChangeForms" ErrorQueue="error" NumberOfWorkerThreads="1" MaxRetries="5" />
<UnicastBusConfig>
<MessageEndpointMappings>
<add Messages="MethodFactory.MedXChange.Library" Endpoint="MedXChangeWeb" />
</MessageEndpointMappings>
</UnicastBusConfig>
Any ideas? Any help would be greatly appreciated.
NServiceBus will return null if a bus has already been created. So determine if someone is already instantiating a bus for you.
In my scenario, we were inconsistently defining endpoint configurations. In one process, we would implement IConfigureThisEndpoint and then explicitly configure and instantiate a bus. In another process we would inherit from AsA_Publisher which implicitly creates a bus for you; and when it came time to explicitly define our bus' configuration for this other process we would throw NullReferenceException on the fluent CreateBus method. Removing the AsA_Publisher inheritance resolved the issue.
Hope this helps!
I am using the Fluent API to handle various configuration options for Logging using EntLib.
I am building up the loggingConfiguration section manually in code. It seems to work great except that the RollingFlatFileTraceListener doesn't actually Roll the file. It will respect the size limit and cap the amount of data it writes to the file appropriately, but it doesn't not actually create a new file and continue the logs.
I've tested it with a sample app and the app.config and it seems to work. So I'm guess that I am missing something although every config option that seems like it needs is there.
Here is the basics of the code (with hard-coded values to show a config that doesn't seem to be working):
//Create the config builder for the Fluent API
var configBuilder = new ConfigurationSourceBuilder();
//Start building the logging config section
var logginConfigurationSection = new LoggingSettings("loggingConfiguration", true, "General");
logginConfigurationSection.RevertImpersonation = false;
var _rollingFileListener = new RollingFlatFileTraceListenerData("Rolling Flat File Trace Listener", "C:\\tracelog.log", "----------------------", "",
10, "MM/dd/yyyy", RollFileExistsBehavior.Increment,
RollInterval.Day, TraceOptions.None,
"Text Formatter", SourceLevels.All);
_rollingFileListener.MaxArchivedFiles = 2;
//Add trace listener to current config
logginConfigurationSection.TraceListeners.Add(_rollingFileListener);
//Configure the category source section of config for flat file
var _rollingFileCategorySource = new TraceSourceData("General", SourceLevels.All);
//Must be named exactly the same as the flat file trace listener above.
_rollingFileCategorySource.TraceListeners.Add(new TraceListenerReferenceData("Rolling Flat File Trace Listener"));
//Add category source information to current config
logginConfigurationSection.TraceSources.Add(_rollingFileCategorySource);
//Add the loggingConfiguration section to the config.
configBuilder.AddSection("loggingConfiguration", logginConfigurationSection);
//Required code to update the EntLib Configuration with settings set above.
var configSource = new DictionaryConfigurationSource();
configBuilder.UpdateConfigurationWithReplace(configSource);
//Set the Enterprise Library Container for the inner workings of EntLib to use when logging
EnterpriseLibraryContainer.Current = EnterpriseLibraryContainer.CreateDefaultContainer(configSource);
Any help would be appreciated!
Your timestamp pattern is wrong. It should be yyy-mm-dd instead of MM/dd/yyyy. The ‘/’ character is not supported.
Also, you could accomplish your objective by using the fluent configuration interface much easier. Here's how:
ConfigurationSourceBuilder formatBuilder = new ConfigurationSourceBuilder();
ConfigurationSourceBuilder builder = new ConfigurationSourceBuilder();
builder.ConfigureLogging().LogToCategoryNamed("General").
SendTo.
RollingFile("Rolling Flat File Trace Listener")
.CleanUpArchivedFilesWhenMoreThan(2).WhenRollFileExists(RollFileExistsBehavior.Increment)
.WithTraceOptions(TraceOptions.None)
.RollEvery(RollInterval.Minute)
.RollAfterSize(10)
.UseTimeStampPattern("yyyy-MM-dd")
.ToFile("C:\\logs\\Trace.log")
.FormatWith(new FormatterBuilder().TextFormatterNamed("textFormatter"));
var configSource = new DictionaryConfigurationSource();
builder.UpdateConfigurationWithReplace(configSource);
EnterpriseLibraryContainer.Current = EnterpriseLibraryContainer.CreateDefaultContainer(configSource);
var writer = EnterpriseLibraryContainer.Current.GetInstance<LogWriter>();
DateTime stopWritingTime = DateTime.Now.AddMinutes(10);
while (DateTime.Now < stopWritingTime)
{
writer.Write("test", "General");
}