I created distribution profile and built app with the distribution profile. I have validated the build and the validation is successful.
After this step, i tried to cross verify the app once again and built an app with developer provisioning profile. Archive file is created successfully. But app is failing to install in mobile.
What is the reason behind it.
Make sure you dont have duplicate keys in your keychain. Delete the old ones and create a new key and prov file then everything will work fine. Normally just dupe entries can cause this.
there are 2 reason for this error
1) you are not add device UDID in your developer provisioning profile.
2) In your device an app is already install with same developer provisioning profile so the your app is not install in your device.
Related
I followed the stepped to create a ad hoc carefully:
Added the testers team devices to the devices list in iOs Provisioning profile page
Created a new distribution profile for ad-hoc
In xcode I chose the project and clicked on product->archive.
I sent both the archive (ipa file) and mobile provision to the testers team.
The application failed to install.
I saw an answer of a developer to set in build settings the provisioning file to Code Signing Identities to the distribution profile here
In the list I can see only iOS Team Provisioning Profile that was created by xcode.
This is probably not the distribution profile.
What is missing? How can I set the build settings to the distribution ones?
In the IOS Provisioning Portal, in the Provisioning page, click the 'Download' button by your new distribution profile and it should get added to XCode.
To check you have it, go to XCode Organizer, Devices, then Library / Provisioning Profiles on the left.
You may also use https://testflightapp.com.
This is a free service and works very reliably - you can manage your testers and test ipa's easily.
First I also tried testing my app without such a service - but I ended up using this, since it's also very easy for the testers.
Create Distribution certificate and Provisioning profile.
You should have the Distribution certificate in key-chain.
Download Distribution Provisioning profile and double click on that profile.
Confirm you are having the profile in XCode -> Organizer.
In case the Add-Hoc deployment won't install on a testing device, and you have the device added to the profile, and the app signed correctly ...
Ok, what I did is to add an Entitlements.plist file and set the Can be debugged option to NO and set it on the target as the Code Signing Entitlements, but actually I don't know if this was the fix because I won't try again and again, now that it worked.
Then, actually I didn't archive the app and save the .ipa file from Organizer - Archives, but instead I've sent the .app file from the build/Release-iphoneos as it is, together with the profile downloaded from dev account. It will install in iTunes and it just worked, after couple of hours of frustration.
I signed up for TestFlight.
Then I followed all steps in this tutorial:
But Xcode throws this warning:
Application failed codesign verification. The signature was invalid,
contains disallowed entitlements, or it was not signed with an iPhone
Distribution Certificate. (-19011)
It smells like there is a lot more work to do than what they wrote in the tutorial.
Is there a complete tutorial which walks through every step without stepping over anything?
And do I need to add the SDK even for simple beta tests?
(Edit: No, SDK is not needed!)
Start with logging into the Provisioning Portal, and adding a test device or two, under Devices. Then go to Provisioning and create a new one for the appID you are working on and add those devices.
Back to Xcode and use the Organizer:Devices:Provisioning Profiles to download (refresh) the Provisioning Profile. Set your project's Debug scheme's signing to use that developer profile. You should then be able to build and then archive. Once archived, do an ad hoc distribution and save off that file to the desktop.
Go to your account on TestFlightApp.com and press the Upload Build button. Drop the file you saved on your desktop, into the Build upload area. TestFlightApp will give you errors if the app wasn't bundled for adhoc or signed properly.
Now, here is where TestFlightApp.com will save you work. Send out invites to friends from within TestFlightApp.com. TestFlightApp.com will manage notifying them and as they create an account, it will also help them find their UDIDs. These UDID's can be batched up and later downloaded by you and re-uploaded to the Apple Provisioning Center, into your devices section.
You then use Xcode to refresh your profiles, and rebuild the app, archive, and upload to testflightapp. Then you can select which one of your testers will get to see this build and what message they should be sent. Your testers will not have to figure out how to download the files and install them using iTunes or other app, they merely press the install button.
Believe me, while it is still a bit of work, it is so much better than not using TestFlightApp.com, especially if your users are not very savvy about app installation. In the future, you can use the TestFLight SDK to gather crash reports and usage information for your debug builds.
See the following for some more info: TestFlight beta-testing iOS app
I have an iPhone app that was handed to me. I deleted all of the existing certificates & provisioning profiles and created them from scratch. I believe I have set everything in the Provisioning Portal correctly:
Distribution Certificate created
Devices with correct UDID's added
Ad-Hoc Provisioning file created with associated devices
I was able to successfully build & Archive my application. When I save it as a *.ipa and drag that and the *.mobileprovision file into iTunes everything is good, until my phone is syncing.
At that point I get an iTunes Sync: Failed to Install error. Other testers get the error: The app was not installed because the signer is not valid
I am not sure how to resolve this?
I have received that error because I had created my .ipa file with the ad hoc provisioning profile BEFORE I added the devices. Are you sure that you are using the most recent provisioning profile when you create the ipa? You may need to check which scheme you are using and verify its right
Everything was correct, except for the final stage where I am given the save options. The profile matched my Distribution profile, but for the wrong app. It just defaulted to one of them. I had to manually change it to the Ad Hoc Distribution I was building for. Silly mistake.
This question was not resolved by the above suggestions, however we were able to fix it by removing the entitlements from the build.
This problem happened while working on an old app we were updating. No jailbreaking, just an ad hoc .ipa sent over email between team members. All provisions were correct.
We were able to figure out the issue was entitlements by trying to install using "iPhone Configuration Utility" instead of iTunes. That gave us the actual error message which was easy to fix.
Debugging this issue was easier than with iTunes. It also has better UI for installing ad hoc builds. I recommend you try it here:
http://www.macupdate.com/app/mac/27986/apple-iphone-configuration-utility
i already face this , finnaly i found,.
If Your Certificates, Provisoning Profiles then & the ipa is generated,,
so there is no problem in your ipa File,
But Problem in Specific Device in which you are try to insalled,,
If Your Device is JailBroken Then Easily iTunes cab Install ipa,,
But If Not Then You Have To Register/Add device to
https://developer.apple.com/devcenter/ios/index.action
->Procsoning Profile -> Devices
Then & Then Ipa File Is Installed
I am trying to test my iPhone app in XCode 4 and it is telling me that i don't have a valid provisioning profile even though i do. What is wrong?
There are a lot of factors that could cause this. More information is needed. The primary things I would suggest are:
Is your device authorized in the provisioning profile (using the Developer Portal or team provisioning profile)
Have you downloaded the latest profile from the developer portal? And made sure its not expired?
Have you specified the correct provisioning profile in the build settings for your project? If you have had to make changes to the profile or renew it you will have to re-download it AND install it in Xcode AND change your build settings to point to the new one even though it has the same name.
I have created both developer and distribution (adhoc) provisions. However, I can only create IPA in xcode with the share -> save to disk button using the developer provision.
If I use distribution provision, it just fails silently.
I have tried deleting the provision on the portal and recreated a new provision, still the same.
Any idea how to fix? Should I reinstall xcode? Thanks.
There are developer certificates that allow to install onto hardware physically connected to the machine where Xcode runs on.
There are Adhoc certificates, created after on the developer web portal you entered the UDID of your user devices. That type is used used for adhoc distribution and the resulting IPA can be send to users to install via iTunes without going through the app store.
There are distribution (Release) certificates that are required to put stuff into the app store.
In project properties ensure you have the correct certificate for the chosen build type selected.
When in doubt about the adhoc profile then delete it and copy the release profile across. Change the certificate from release to adhoc and try again.
You can test your own adhoc builds by doing a build and archive, then drag and drop the resulting IPA onto iTunes (apps tab) and do a sync.