I've tried to solve this for so long now. I've installed the plugin from the Chrome store but the plugin button in the browser is grayed out and says "Not connected" on hover. When I debug in WS I get this popup:
I've seen the help section on JB site but the help there is utterly poor, and doesn't even mention the problem with the plugin and the IDE not recognizing eachother.
I've looked over other posts here with similar problems, though usually it revolved around LiveEditing, and I haven't found any help there for my problem.
Can someone please give me a sequence of steps to perform to check where the problem is with the syncing between the IDE and the Chrome plugin?
EDIT :
The JB console is empty when I open it:
Right click to JetBrains chrome extension
Select "Options"
Set Host: 127.0.0.1
Set Port: 63343
Click "Apply"
You're ready to go
please, check what is written in extension console (http://confluence.jetbrains.com/display/WI/LiveEdit, How do I know what's wrong?)
The console contents along with your idea.log (Help/Reveal log) would be helpful
Related
Yesterday, VSCode (1.67.1) decided that it was unable to start (crashes immediately) and spits out the error code -1073741818. I have the option to reopen or close but nothing happens regardless of the option chosen. Thought it might be an issue with the file/folder I was opening but no success opening any files/folders at all. Tried to disable GPU, disable extensions and re-install but all lead to the same error code. Tried to move to Atom, but, oddly enough, the same issue occurred. Discovered Atom and VSCode are both based on Electron and that Electron has previously had issues with Nvidia drivers (currently running 512.77) so I tried to install previous versions of the drivers that were working but no success. I finally gave up and moved the code to another system and everything works flawlessly.
So now I that I have some time, I am trying to figure out what went wrong and where to go from here. My uninformed, uneducated guess is it is driver related but I am not sure how to resolve it. I was able to successfully use VSCode earlier in the day with no issue. The system went into stand-by mode and upon return, the issue began. Any suggestions/guidance on where to start would be greatly appreciated.
VSCode Crash Window
Welcome to the community! I think this is caused by an corrupt installation of vscode, try to restart your computer and maybe reinstall vscode by going to, https://code.visualstudio.com.
If that does not help maybe try to submit an issue on the vscode github here: https://github.com/microsoft/vscode.
How to submit an issue on github:
Find the menu bar where it has multiple menus, it should have: "code", "pull requests" and "issues".
Click on "issues" button.
Click "new issue" to create an issue.
Then click "bug report" and enter details to file issue.
Once ready click submit issue to submit your issue in github.
Also, you'll need a github account to create a issue, signup here: https://github.com/
I hope this helps!
Please check if you've installed any additional extensions which may be causing the VSCode to crash.
My VS code keeps crashing when opening it
I had the same problem. First, it used to crash once every 10 minutes, then it started crashing 10 times a minute after a few hours. It just stopped working that day.
I don't know how it was resolved but it did automatically resolve.
I searched for the solution but the VS code on GitHub was already closed. If applicable take a rest and let your PC calm down also. Then if the problem doesn't get resolved, try contacting the developer team.
I have installed Open in browser visual studio extension. But when I try to open the browser by shortcut Alt+B. It fails showing the following:
Running the contributed
command:'extension.openInDefaultBrowser' failed.
Please help if there's any solution.
Go to settings --> Extensions --> Open in Browser and set a default browser. In my case I have set it to "chrome" (it can be "firefox" too), so it opens in chrome every time I use the extension.
i have no problem when i using windows, but since i use linux open in browser extension not work because default browser not set as well, and i try to set manual in VS Code setting and set the plugin open-in-browser by default to Firefox
its solving my problem i hope its work to you
If the above solution didn't work install its previous version
Vote up If this Helped !!
I start using vscode less than a month. Please forgive me if this is a dump question.
OS: OS X 10.11.3
VSCode: 0.10.6
Plugin: VSCode-PHP-Format (download via git clone)
Extension path: ~/.vscode/extensions/VSCode-PHP-Format
I restarted VSCode, open php files, but do not see "Format Code" on the right click menu.
Any idea how to debug this? Right now I don't even know if the plugin load correctly.
With tips from Tobiah Zarlez, I found the "Toggle Developer Tools" in VSCode.
It is shown in the console the plugin cannot find js-beautify.
Solution
Inside ~/.vscode/extensions/VSCode-PHP-Format, run
npm install
It will pull in js-beautify. Then restart VSCode.
I am on my phone and not able to double check to see if it is there, but I'd recommend installing from the visual studio marketplace to insure the plug in is installed correctly. You can do so by hitting CTRL+SHIFT+P and typing "install extension"
Beyond that, a quick glance at the code the plug in should be activated when you open a php file... but since this is a third party plugin, I can't speak to if it actually works or not.
(Again, on phone so can't test)
What you could do is modify the extension.js file to add a "console.log ("hello world")" to the activate function. Them check the log to see if the plug in is installed correctly.
I saw you weren't the only person to complain about the plug in not working though. If I were you, I would continue to try and contact the creator
Hey there I've been using the JetBrains IDE support extension for a week now, and While it is great utility. I grow tired of clicking the "X' in the Chrome Yellow Warning ("JetBrains IDE Support" is debugging this tab.)
This may be a noobish question for experienced devs, but does anyone knows how to get rid of this Chrome pop-ups?
Thanks :)
Here is a snapshot:
You can disable this warning in chrome://flags using the Enable Silent Debugging flag:
It's mentioned in the comment #28.
Here is the direct link to the option:
chrome://flags/#silent-debugger-extension-api Just paste this to your Chrome addressbar.
For the ones who didn't understand ( like me :P )
You need to open this address chrome://flags in Google-Chrome and Enable Silent Debugging
While the relevant flag has been removed from chrome://flags, you can still use the command line switch:
chrome --silent-debugger-extension-api
which can be persisted in your flags config (eg. ~/.config/chrome-flags.conf on linux).
See Enable Silent Debugging is not available in Chrome browser
For the newer versions of the Chrome this flag is not available anymore.
So Here is the solution
Open settings in your IDE then head into Tools>Web Browsers
then click on Chrome and hit the pencil icon and
write this in "command line options" finaly hit ok
--silent-debugger-extension-api
now close your chrome if it is open then try to launch it again using debug or run...
I think that question is self-explained :-)
When I browse to Application eclipse send me an error.
The simplest way to get Eclipse to recognize Chrome as the default system browser is :
Open Safari.
Go to menu Safari > Preferences > General.
Change 'Default web browser' to Safari.
Close the Preferences dialog.
Re-open the Preferences dialog.
Change 'Default web browser' to Chrome.
Close the Preferences dialog.
This solution is more general as it applies to any application which chooses the incorrect system browser. (thanks to Kelvin Lawrence at IBM)
I am using Eclipse 4.2.0 on an iMac with OSX Mountain Lion. This also works for Eclipse Kepler on Mountain Lion.
I posted the answer on another question like this on stackoverflow, so here it goes:
I found the solution in a blog's post that doesn't exist anymore, it involves configuring the Location to be '/usr/bin/open' and the parameter is '%URL%'.
You need to make sure that google chrome is your default browser and it will work properly. This is the only method that worked for me on OSX Lion.
I solved this by calling /usr/bin/open -a "/Applications/Google Chrome.app" <url>
rubdottocom almost got it. The problem is, that the path contains spaces. If you write a new shell script with the following content:
'/Applications/Google Chrome.app/Contents/MacOS/Google Chrome' $1
Eclipse can launch a new Chrome instance with it. Sadly, this way it is not possible to open a new tab in an already running instance, as the script exits with the following error message:
[21043:2307:292361872340725:ERROR:process_singleton_mac.cc(102)]
Unable to obtain profile lock.
Ooops! I find the answer here: Is there a way to add Google Chrome as an external web browser in Flash Builder Standalone for Mac?
The exact location is:
/Applications/Google Chrome.app/Contents/MacOS/Google Chrome
It's annoying that you can't enter inside to an "Application folder" (AppName.app) through Finder :-S
Oh Wait! It's not working >_< Safari is opened
you can also try to fix that from eclipse at the menu bar: windows->preferences->general->web browser-> select the radio, Use external web browser and choose your default browser from there. that simple.
Here's a helpful visual showing the /usr/bin/open techinque:
In Finder, right click on Google Chrome.app, select Show Package Contents and browse down to Contents/Mac OS and drag Google Chrome to the Location in Eclipse's Edit External Web Browser dialog box. Enter -url %URL% in the field Parameters. This worked for me on Eclipse Indigo on MacOS 10.7, at least when Chrome was not started before...
My method to set Chrome as a default browser in eclipse is:
Go to Window >> Web browser and then select Chrome.