I'm new to Eclipse. I may need a better understanding or a plugin that would provide me with features described below. While doing some Android development, and I while making changes to my code at one point Eclipse warned me that this emulator doesn't support hot-swapping and if I want to disconnect. I'm used to see status in either the toolbar or in some log from Visual Studio. Is there a way to see this feedback in Eclipse?
My problem is that there are quite much implicit stuff in eclipse I would like get feedback of and control, like whether I'm
connected or not to a device,
if I'm attached to a process on it or not with debugger,
some kind of build log with a timestamp so I know it happened,
the automatic uninstalling and installing of the project on the device
which project is "active" ("featured") in "Run" and "Debug" buttons/configurations
Is there a plugin that can give me explicit commands over these automatic features? Like a toolbar or command. What I would expect of this tool:
be able to indicate the current status (eg. currently connected or not)
gives me control to eg. connect
gives me control to eg. disconnect
Preferably on a toolbar, as I know some of these are available as menu commands.
Furthermore I tried to configure my toolbar by Window menu -> Customize perspective..., but pin-pointing the features I want made my Eclipse put empty space up for the buttons I disabled, and next time I got to the same config screen it got the checkboxes wrong and displayed some stuff active what was actually disabled.
Related
Can anyone explain these three debug symbols on VSCode I have found on the internet?
My vs code has the one with the play icon.
All demos online on debugging have the one in the middle. How do I get that?
Also, node js debugging is installed but I think it shows as disabled, with no option I can find to enable it.
To answer your question directly [TL;DR]: you already have it if you are using the latest version of vscode. It will take you to the same view as the one on the right
If you look at the codicon libray ref the middle one you pointed out is not present.
Visual Studio Code made changes in February 2020 ref that incorporates running and debugging to be something more harmonious:
User studies revealed that new users have difficulties finding how to run their programs in VS Code. One reason is that the existing "Debugging" functionality is not something that they relate to "Running" a program. For that reason, we are making "Run" more prominent in the UI.
The main menu Debug has become the Run menu.
The Run and Debug view has become the Run view and the corresponding Activity Bar icon now shows a large "Play" icon with a small "bug" decoration.
So in other words, there is no difference. The 'Run' and 'Debug' view is synonymous and the icon reflects those changes. As they noted, the Debug view is now called the 'Run' view, but it still offers debugging and breakpoints.
There are 2 possibilities you are running into however:
The tutorials and guides you are using are out-dated (showing an outdated version of vscode)
The tutorial or guide is using an extension that offers debugging capabilities. Extensions have some control over the icon you see
The extension is for single file debugging, according to the June 2020 ref notes, vscode recommends the following:
For debug extensions that want to improve the single file debug experience by adding a "Run" and/or "Debug" button to the editor, we recommend following these guidelines for a consistent look and feel:
Contribute Run and/or Debug commands in the package.json (see Mock Debug):
Use the command titles "Run File"/"Debug File" or "Run Python File"/"Debug Python File".
Use the $(play) icon for Run and $(debug-alt-small) for Debug.
Where their codicon library was updated in June to reflect the following:
As you can see, none of them are prefixed with verbiage like 'run', but they all represent the same functionality.
Additionally, you may see this icon as well:
This represents the panel (view) where the output of your debug will go.
I'm using Eclipse (Kepler) for a GWT application and for some reason, superDevMode keeps appearing in my arguments. We are stuck with GWT 2.4 which does not know what superDevMode is. I remove the argument, hit Apply and Debug to start the app, but when I look at the arguments again, -superDevMode is in there again. I am assuming there is some property that belongs to 2.6 (the version that was installed with the Eclipse plugin), but I can't seem to find it.
Update: Below, Adam recommended that I go to the GWT tab and take it out of superdevmode. Here is a screenshot of that tab:
There isn't a way to do that. The large area at the top of the tab (above the Super Dev Mode group) suggested that something was supposed to be there, so I set the project's GWT to 2.6. Sure enough, there was a Super/Classic dev mode selection. I set it to classic, saved the settings, and then put the project back to 2.4. The GWT tab looked exactly as it does above and the arguments now has "-nosuperDevMode" in it, which is also not recognized by 2.4.
Any help would be appreciated.
Thanks,
CC
I found a temporary workaround that comes with a caveat: I made the Eclipse Run Configuration file read-only.
Example path:
<YOUR_WORKSPACE>\.metadata\.plugins\org.eclipse.debug.core\.launches\<YOUR_RUN_CONFIG_NAME>.launch
Then whenever you bring up the Dev Mode Run Configuration in Eclipse it still shows the -superDevMode flag, but when you click the Close button it now asks you if you want to save and you can press No.
The big caveat: if you actually do want to change the Run Configuration Eclipse will ask if you want to save, you press Yes, the dialog closes, but it didn't actually save.
Easiest fix is to shutdown Eclipse, manually edit the .launch file to remove -superDevMode, make the file read-only, then start Eclipse again.
Here's the bug report.
Go to GWT tab (3rd from left) and switch from Super Development Mode to Classic Development Mode
I know netbeans syncs the original files once I save, but if there is a file changed externally is there a way for netbeans to recognize this and either tell me to re-sync it or automatically resync it with the new changes?
Here's what makes this behavior possible:
NetBeans 6.9 contains a feature that automatically looks for external changes to keep informations about files up-to-date. We have some reports that it can slow down NetBeans mainly, when an open project has many folders. When NetBeans find out that files were externally changed, it re-scans the files to keep data up-to-date that are used with features like code completion, navigation etc. Unfortunately the notification and following re-scanning can take some time and during this time many mentioned features are waiting for the finishing of scanning. There is option Enable auto-scanning of sources that can switch off this behavior. The option you can find it in Options dialog, Miscellaneous category and Files tab.
The default behavior is that NetBeans also looks for external changes when the main window gets focus. This is can be during developing a web application very often when user switches between browser and IDE. The mentioned option also switch this off.
When you switch off option Enable auto-scanning of sources you can still keep the information up-to-date, just invoke Scan for External Changes action from Sources menu manually.
(Here's the original article by Petr Pisl)
I find it counterproductive to leave this setting on, as sometimes auto-loading external changes to a file opened in the UI without asking for permission first can ruin your day when you're forced to make small local changes that you don't want replicated in your repository. I'm sure other people can think of more reasons to advocate for "warn before loading external changes" behavior to be implemented in NB. That is one of the reasons why I like Eclipse better sometimes.
I installed a plugin that allowed me to create UML diagram from my code. Everything was working fine until I found that now all keyboard shortcuts (like CTRL-X, CTRL-Z, CTRL-SPACE, CTRL-SHIFT-F,..) except for CTRL-C and CTRL-V now require a click on a small square that appear on the bottom right corner. And this is required every single time.
This are few examples of the square that appears:
If I click on the message or press Enter I can access the functionality. Does anyone know how to get rid of this annoying thing or at least reset Eclipse related configurations?
Thanks in advance
EDIT:
I obviously tried uninstalling the plugin but nothing changed.
Try Window / Reset Perspective as the duplicate shortcuts may be still in the perspective.
Also try restart specifying -clean option to rebuild the workspace metadata.
The pop-ups you are seeing are the "keybinding conflict" popups. These are common when you have two different plugins defining the same keybinding and looks like these. Still in your case there's only one option to choose from and it definitely looks like a bug.
In the Eclipse bugtracker database there are two issues that are looking like the one you have: #377048 and #374942.
These issues are marked as fixed in 4.2-I20120410-0633. So if you are having Eclipse 4.2 without any service releases installed, you would probably have this. The solution is - to use a newer Eclipse version. Eclipse 4.3.1 is available to download since today, and it should contain a lot of other fixes since 4.2. So I encourage you to install it.
The other solution could be to try playing with keybinding dialog (Window->Preferences->General->Keys) and trying to unbind and re-bind the commands that you are having issues with.
We are currently evaluating install4j and things are going pretty well, however I have a question about auto-update.
Currently I see options and documentation around 3 options for auto-update and the third one (no version check) seems
to be the closest to what we need. However it sounds as though it still prompts the user to actually start the download/install. Is there
any way to get around this? We are targeting our software as a service on many windows boxes in a server room, so there isn't a user
to click continue for that last step. I believe we can roll our own service to monitor for upgrades that will do a command line
install with an answers file to prevent prompting, but I'd love to know if I missed something that would allow me to utilize
install4j's auto-update.
When you go to Installer->Screens & Actions, click on the "Add" button and choose "Add application", you can choose from a number of pre-defined templates. However, they are just templates and after adding them you can change them completely.
If the updater should be automatic but still show a progress dialog, you can just set the "Default execution mode" property of the updater application to "Unattended mode with progress dialog". In that case, no screens will be shown at all.