My (newest) Netbeans (NetBeans IDE 7.3 (Build 201302132200)) seems to be failing completely, when I'm trying to access my own GitHub repo using SSH. It works without problems with HTTP URLs.
Since I've imported an existing local copy of GitHub repository (New > PHP Project with existing sources), created once with TortoiseGit, there were remote settings saved in local copy meta-data (probably in .git folder). So Netbeans offers option Select Configured Git Repository Location in Push to Remote Repository window. But is unsuccessful at that.
Tried following:
When I'm using SSH URL (git#github.com:user/reponame.git) and Password option, with account pass, Netbeans tries to connect GitHub (remote) and after circa 5 seconds throws error Cannot connect to the remote repository at git#github.com:user/reponame.git.
When using SSH URL with Private/Public Key option, Netbeans throws exactly the same error immediately, so I assume, that for some reason it doesn't even tries to connect GitHub.
What is even more strange (?), Netbeans is not asking for private key's passpharse. I've set it, but did not entered it to Netbeans deliberately, to test connection process. I was more than sure, that Netbeans will ask me to provide this passpharse, as it shouldn't be able to use private key without it. To my surprise, it hasn't asked for it and instead it thrown an error saying, that it can't connect GitHub. Of course, that was only a test. After entering correct passpharse, I'm getting exactly the same effects.
I've copied my repo's URL directly from GitHub website, without any modifications. It seems, that I can only use HTTP URL (https://github.com/user/reponame.git). This works and assures me that all items (URL, user, reponame, password, finally Internet connection) are OK. But, it seems, that Netbeans fails completely on SSH URL.
Above happens always, no matter if I select Select Configured Git Repository Location or Specify Git Repository Location in Push to Remote Repository window. No matter, what I'll do I can't access my repository via SSH in Netbeans and using HTTP is the only option.
I have created my private-public key pair using puttygen.exe from PuTTY's website. I saved private key in Netbeans installation directory and added public key to GitHub's SSH Settings page. I used step-by-step guide I normally use with TortoiseGit.
I don't know what else I could miss out or I'm doing wrong? Any idea?
For the record:
When generating keys with PuTTYgen, it's recommended for compatibility to export it as an OpenSSH key. This can be achieved by accesing Conversions > Export OpenSSH key menu.
After series of many tests, I found out that Netbeans:
Does not work to well with existing local copies of GitHub (or any other git) remote repositories.
Does not work at all with SSH keys generated by puttygen.
As for first, I had to remove entire folder cloned with TortoiseGit and clone the same repository using Netbeans-bundled tools (Team > Git > Clone). The same goes for Subversion (look here) -- so the general rule of thumb says, that when you're switching from another Git or SVN client to Netbeans, you should do a full, clean clone (or checkout) of remote repository as attempts to re-use existing copy will most likely fail.
As for second, follow instructions given in this GitHub article and use ssh-keygen (either from your local installation of Git for Windows, in case of Windows or from any other source) instead of puttygen -- SSH keys generated by it can't be used in Netbeans for setting up password-less login to GitHub.
As I wrote, I've been using TortoiseGit previously, which accepts and works well with puttygen keys, so it wasn't to obvious for me, that source of the problem is here.
After fixing this two problems (getting clean clone and generating correct keys), ale problems expressed in my question were gone and Netbeans works with GitHub repositories like a charm.
My solution was to use a the ssh-keygen with the PEM option:
ssh-keygen -t rsa -b 4096 -m PEM -C my#mail.xy
Netbeans 12 use JGit for the Git-tool and this supports only special kinds of ssh keys?
Related
A novice here, please type a small instruction describes how to use a private GitHub repo in VSCode
To configure a private repo, you first need to generate a public/private RSA key pair on your dev machine to be able to establish an ssh connection to your repo instead of an HTTP connection.
Just install Git for Windows in your development environment. During installation, please make sure that you have checked the option to include git bash, as you'll need it to create this key. Once installed, right click on your Windows user folder, select on Open git bash and then just run ssh-keygen (or if you are using Linux, you can just ssh-keygen) and go through the wizard.
This step will create a hidden .ssh folder that contains your public/private RSA key pair. Navigate to that folder.
The goal here with these keys is to configure your public key on GitHub. Open your id_rsa.pub file with notepad and copy its entire content. Then go to GitHub and under your user Settings > SSH keys just add a key and paste your entire public key plus an arbitrary name.
Now restart VS Code and press CTRL+ ' (Backtick) to open PowerShell and then run:
In case you haven't cloned your repo:
git clone git#github.com:{UserName}/{RepoName}.git
To Upload changes to your repo:
git add .
git commit -m "{Name for this commit}"
git push {Repo Origin name (default = Origin)} {Branch Name (Default = Master)}
Note. {} are for reference, do not include them in your commands.
VS Code has built-in support for Source Control, so if it is configured, VS Code will automatically detect changes and get them ready to commit with just a commit message and click. Also, there's a really good VS Core extension called GitLens. This can help you to 1-click push
That should do it. 😃
As of now (july 2019, not sure when this got added exactly) you can do this from within VSCode, just hit F1 in windows or ctrl+⇧+P (or ⌘+⇧+P on mac) to access the command palette of VSCode, then type or select Git: Clone and finally enter the URL of your repository, so something like https://github.com/MY_USERNAME/MY_PROJECT.git, finally choose the folder you want to use for your cloned repository (open the main folder that contains all your projects, no need to manually create a sub folder for the project itself, git will do this for you using the projects name)
To find your exact repository URL, open the projects github page and click on the green button on the top right that says "Clone or download", if you wonder if you should use HTTPS or SSH check out the github documentation
I had trouble with cloning a private repository from Github with VSCode. In my case the problem was that I followed Github docs instructions to generate SSH keys with Ed25519 algorithm and using these keys (id_ed25519.pub) with VScode and Github did not work for me.
I generated new keys with the RSA algorithm:
ssh-keygen -t rsa -b 4096 -C "your_email#example.com"
and after adding id_rsa.pub to my Github account settings VSCode started working with private repositories.
If Git is already installed
Copy the URL of your private repository
Go to the version control in VS Code
Click on clone repository (authentication required if not done already) and
Paste the copied URL in the edit text box as shown in the documentation.
i have same problem- but solution was simple:
Mistake was: in windows when you create a keys name should be "id_rsa" (windows cmd suggest rename yor keys).
if your key name is different simple rename private and public keys to "id_rsa" and "id_rsa.pub"
Then add keys via: ssh-add ~/.ssh/id_rsa (edit path if files in different).
Then add id_rsa.pub key to github profile settings(copy paste of content).
Now you can work with private repositories.
#Daniel summed it up but quick read for anyone who's having issues with generating ssh/adding it to github.
As #Kennet stated use ssh-keygen -t rsa -b 4096 -C "your_email#example.com" hit enter through, it will default to C:Users most likely.
Copy the ida_rsa.pub generated in github go to Setting -> Deploy keys (documentation I saw was outdated) and paste it in and name it ida_rsa.pub.
Note: Make sure to select "Allow write access" otherwise your pushes will be denied
If you want multiple ssh keys, this document explains how
I am importing a git project into Eclipse using a git URL. It is giving me the below errors in a popup.
Incorrect URL
No Network Connection (wrong proxy connection)
SSH is not configured correctly.
I have checked that the URL is correct. How to check the remaining 2 options?
Try testing each error-message suggestion one by one:
Confirm the URL again. Never hurts.
Connect to the host machine (or website) where your repo lives from outside of Eclipse. If you can't do this, your connection to the host is probably the issue. If you can, the issue is not with your connection.
Clone the git repo to your machine directly: open a command prompt, navigate to a temporary folder, and git clone <URL>, where is the SSH address you have confirmed. If the repo clones successfully, SSH is working fine on your machine, and it's time to look at Eclipse, and the information you're passing it.
If you provide more information on your environment, network configuration (esp. re: proxies, as #howlger suggests), SSH configuration, and the settings you are passing to Eclipse, the community may be better able to assist with your specific case.
I am unable to clone a repository in Eclipse. But yes I am able to clone the same through git bash.
I am getting an error with possible reasons as:
Incorrect URL
No network connection
SSH is not configured properly.
My URL is correct and I am having proper network connection, though. As far as SSH is concerned, I am having the same set of keys in my local Windows folder, Eclipse > SSH2 and my Gerrit SSH public keys.
I am really confused, that where I am missing out on this.
The issue was due to SSH keys. I generated the new pair of keys from eclipse and mapped it to Gerrit. It is working for me now.
Thanks Rudiger for your help.
I've been trying to start a project using EGit with Bitbucket but I can't push the project to the repository in the server.
These are the steps I've followed (I'll try to be very specific so other people can use it as a tutorial mode; even though it's not working for me it might work for others):
1) I installed Git on Ubuntu 12.10 using this tutorial
2) Followed this tutorial for GitHub.
Start a new C++ project in Eclipse
Under Window > Preferences > General > Network Connection > SSH2 > Key Management tab, I generated a new RSA key and added it to the list of deployment keys of my repository on Bitbucket.
Right click on the eclipse project: Team > Share project ; Team > Add to index ; Team > Commit
Window > Show View > Other > Git > Git Repositories
Right click on Remotes > Create Remote > Checked "Configure push" and typed my project's name
Add Push URL: ssh://git#bitbucket.org/myuser/myrepository.git, Protocol: ssh; port: blank; user: git; password: blank
Advanced button under Ref mappings and selected the "master" version. If this step works, it means that the RSA key is configured in Bitbucket and EGit properly. Otherwise it will show a connection error.
Everything is done. However, when I press "Push" I get the following error:
ssh://git#bitbucket.org/myuser/myrepository.git: push not permitted
I've tried every configuration possible: switched to a new work space, updated Eclipse, created new repositories, re-installed Git... Any ideas?
Alright, I've finally found a way to work with it.
It's just changing the authentication mode. If the HTTPS link is used, instead of using the SSH link, everything works perfectly. It seems that SSH works just in a read-only mode.
Of course the authentication method is different: you have to type the password and the SSH keys stored in Bitbucket are no longer necessary.
For those who are having problems with EGit, I recommend following eugener's way to automatically configure EGit. Then you just have to select HTTPS as authentication mode to push the stored commits.
There is much simpler way of configuring remote Git repos in Eclipse:
Create an empty repo on BitBicket
Copy repo's URL
Clone repo to your machine using "Git Repositories" view.
Share your project into newly cloned repo.
Since a repo was cloned - remote settings were configured automatically. This means you will be able to push immediately
It might be a user name misconfiguration in .gitconfig.
Probably related, I fixed "auth fail" problems by following the instructions on:
http://wangpidong.blogspot.com.es/2012/05/how-to-use-bitbucket-with-egit-in.html
Got it from:
Configuring egit with BitBucket
In this specific case I agree with resolution from Olivier J.'s comment under original question.
But I have had similar problem and it was caused by something else. I resolved it and here is what happened:
I have been using some private repository at Bitbucket (A) with some user account and some public key (X) to access it. I have had key X loaded in my pageant Putty key chain.
Then I created a new public repository (B), also at Bitbucket with a different user account and another public key (Y). I added this key to pageant too.
When I tried to access repository B apparently public key X and not Y was used, because ..for SSH client both connections are the same - same user (git) at the same host (bitbucket.org)! And key X was used first because ..it was loaded earier? Or maybe because its name was alphabetically first? I am not sure but the result was that...
Read-only access for B using X was granted because the repository was public and any valid Bitbucket user key was enough to gain this kind of access!
..but writing (pushing) required key Y, which was not used by SSH.
So the general tip is: to resolve strange read-only git via SSH access errors check carefully which private key is actually used by SSH.
I resolved this problem by loading only one key - X or Y - in pageant at a time but I would love to do it a smarter way - please let me know in comments if you know how!
Using Bitbucket I do it this way:
create a repository in bitbucket
clone the empty repository using the https url
connect the project in eclipse to the repository using the Team -> Share option and select the location where you cloned the repo
index (stage) your project files
commit and push
I set up Mercurial (actually TortoiseHg) to work so that Netbeans could interact with BitBucket. I set it up with HTTPS, but now I'm trying to use SSH instead. I'm not having much success. Here are the steps I took:
First, I opened PuTTYgen and generated an SSH2-RSA key. I wrote my email - the same one I used to register on BB, I don't know if that matters - as the Key comment. Anyway, I uploaded the public key to BitBucket and it accepted it.
Then I created a private key and added it with pageant, as this page instructs. After that I made a command from the command line to verify it worked:
hg clone ssh://hg#bitbucket.org/myaccount/myrepo
It worked - cloned the entire repo to my computer. But then I went over to Netbeans and right-clicked on my project and went to Mercurial > Properties.... I filled out the box like this:
default-push: ssh://hg#bitbucket.org/myaccount/myrepo
default-pull: ssh://hg#bitbucket.org/myaccount/myrepo
username: My Name <my#email.com>
I tried to push/pull my repo, but it didn't do anything. I'm using Netbeans 7.0.1. How do I fix this?
You can setup your repo as https. I already tried and it works.
default-push: https://hg#bitbucket.org/myaccount/myrepo
default-pull: https://hg#bitbucket.org/myaccount/myrepo
username: My Name <my#email.com>
You will need to setup the SSH link in the hgrc file for the repository or the one that is used by Netbeans.
Details can be seen here, how it can be setup: http://wiki.netbeans.org/FaqHgSSH