I want to use Fuzzy Logic Toolbox in C#. To do this, I created a NET-library using deploytool, but it does not include the file fuzzy.m, which I need to work. And in the log mccExcludedFiles.log the following information:
This file contains the list of various toolbox functions that are not
included in the CTF file. An error will be thrown if any of these functions
are called at run-time. Some of these functions may be from toolboxes
that you are not using in your application. The reason for this is that
these toolboxes have overloaded some methods that are called by your code.
If you know which toolboxes are being used by your code, you can use the -p
flag with the -N flag to list these toolboxes explicitly. This will
cause MATLAB Compiler to only look for functions in the specified toolbox
directories in addition to the MATLAB directories. Refer to the MCC
documentation for more information on this.
C:\Program Files\MATLAB\R2010b\toolbox\fuzzy\fuzzy\fuzzy.m
called by D:\MyFolder\VNTU\bakal\matlabAndCs\ShowFuzzyDesigner.m
(because of toolbox compilability rules)
How do I include this excluded fuzzy.m file in the compilation?
The command fuzzy launches the Fuzzy Inference Systems editor, a GUI supplied with Fuzzy Logic Toolbox. Compilation of Toolbox GUIs with MATLAB Compiler is typically not supported, and as detailed in the documentation for MATLAB Compiler, this is true of the GUIs within Fuzzy Logic Toolbox.
I must say, I think the message you're getting in the mccExcludedFiles.log file is mostly misleading - all of those things could cause a file to have been excluded, but in this case the only relevant bit is at the end, "(because of toolbox compilability rules)".
You might want to look into how to build a fuzzy system using the line code functions supplied with the fuzzy toolbox, and not the GUI. This walkthrough gives you a pretty good handle on building a Mamdani inference system using the line code tools. I am not positive how these translate into C# code, but I think there should be equivalent libraries therein.
If you cannot find a natural way to implement the MATLAB routines in C#, then you could look at this discussion which links some free fuzzy libraries for C#. I think one of the links is broken, but the other three load just fine.
Related
In MATLAB, there are roughly 3 ways to define functions: non-comment-only .m files, .p files, and compiled code (e.g. DLL, MEX).
Knowing where a function is defined could be helpful in several cases, such as when a breaking change was introduced to some function outside our control, and we'd like to try to revert to an old version in the hopes of getting our code working again; or when trying to reverse-engineering some undisclosed algorithm.
The which function is usually very good at identifying function definitions and their locations (which works for .m, .p and MEX), but isn't very useful when it comes to shared library functions, where (at best) it points to a comment-only documentation file:
>> which _mcheck
built-in (undocumented)
>> which svd
built-in (D:\Program Files\MATLAB\R2019a\toolbox\matlab\matfun\svd)
If so, assuming a function found within a shared library is called during the execution of my code, how can I locate the specific file (DLL) that contains it?
It turns out that dbstop can be used for this. For example:
>> which svd
built-in (D:\Program Files\MATLAB\R2019a\toolbox\matlab\matfun\svd)
>> dbstop svd
Warning: Entering debug mode is only supported within running MATLAB code files.
Warning: MATLAB debugger can only stop in MATLAB code files, and "libmwmathlinalg>svd" is not a MATLAB code file.
Instead, the debugger will stop at the point right before "libmwmathlinalg>svd" is called.
From there's it's just a matter of finding a file called libmwmathlinalg (with the relevant extension) - which isn't a difficult task if your drive is indexed.
I wanted to ask if anyone have run some C code containing CUDA code on Matlab?
I have read the documentation on Mathworks website but I still cant quite wrap my head around it. I do understand that it is two main type of ways you could do this either executing a CUDA kernel by constructing a object with the function parallel.gpu.CUDAKernel or by constructing a mex file out of a .cu file. There are some things though I do not understand when using these two methods.
Using the mex approach should I use another IDE like Visual Studio to compile a .cu file first before compiling the mex file in Matlab? If so how can I compile the .cu file without a main() function in the .cu file, I always get errors when I try to compile it that way in VS, or is it okay to have a main function in the .cu file and pass the pointers to the GPU arrays to the main function?
For the CUDA kernel approach, should compile the kernel in VS, and in that case how?
Both things can work.
If you want to have flexibility, my suggestion is to write your .cu files with .c (or .cpp) files*. Once you have some basic thing working, you should be able to write a mex wrapper around it in order to grab MATLAB variables and convert them co C/C++ so you can pass them to and from CUDA. This requires you to have a compiler that is both compatible with your versions of MATLAB, CUDA and OS. An example is Visual Studio 2013 in widows and most versions of MATLAB and CUDA, but please check. Generally this is done by linking nvcc to the mex compiler after setup with some xml files (see example here from my toolbox). This approach gives you full flexibility, not only for working with CUDA, but also with working with the anything that you may want to use together with your kernels e.g. tensorflow, eigen, SQL, ... Its full flexibility.
If instead you just want a few operations accelerated with simple methods, use the Parallel computing toolbox with gpuarrays for standard MATLAB operations or with parallel.gpu.CUDAKernel for your own kernels. To use this second one you need to compile a ptx file, which seems pretty straightforward. A priori this gives you less flexibility, as it will run just a kernel, but often complex GPU programs may need several kernels and data handling techniques, as well as communication between kernels etc. However I have personally haven't tried it and perhaps you can achieve full flexibility. Let me know and I will edit the answer.
In short, you choice depends on your application/needs.
*You might not need .c or .cpp files with modern versions of MATLAB and mexcuda.
I was wondering if there is a way to create a '.exe' file from ' .m' file in MATLAB, such that it can be run in machine which does not have MATLAB (like it can be done in C, C++).
I know writing a MATLAB function is one way, but I am not sure if it can run in machine without MATLAB.
Also I would like to hide my code and just create a script which can be run by a user using his own data files.
The Matlab Compiler is the standard way to do this. mcc is the command. The Matlab Runtime is required to run the programs; I'm not sure if it can be directly integrated with the executable or not.
If you have MATLAB Compiler installed, there's a GUI option for compiling. Try entering
deploytool
in the command line. Mathworks does a pretty good job documenting how to use it in this video tutorial: http://www.mathworks.com/products/demos/compiler/deploytool/index.html
Also, if you want to include user input such as choosing a file or directory, look into
uigetfile % or uigetdir if you need every file in a directory
for use in conjunction with
guide
Try:
mcc -m yourfile
Also see help mcc
If your code is more of a data analysis routine (vs. visualization / GUI), try GNU Octave. It's free and many of its functions are compatible with MATLAB. (Not 100% but maybe 99.5%.)
mcc -?
explains that the syntax to make *.exe (Standalone Application) with *.m is:
mcc -m <matlabFile.m>
For example:
mcc -m file.m
will create file.exe in the curent directory.
It used to be possible to compile Matlab to C with older versions of Matlab. Check out other tools that Matlab comes with.
Newest Matlab code can be exported as a Java's jar or a .Net Dll, etc. You can then write an executable against that library - it will be obfuscated by the way. The users will have to install a freely available Matlab Runtime.
Like others mentioned, mcc / mcc.exe is what you want to convert matlab code to C code.
The "StandAlone" method to compile .m file (or files) requires a set of Matlab published library (.dll) files on a target (non-Matlab) platform to allow execution of the compiler generated .exe.
Check MATLAB main site for their compiler products and their limitations.
I developed a non-matlab software for direct compilation of m-files (TMC Compiler). This is an open-source converter of m-files projects to C. The compiler produces the C code that may be linked with provided open-source run-time library to produce a stand-alone application. The library implements a set of build-in functions; the linear-algebra operations use LAPACK code. It is possible to expand the set of the build-in functions by custom implementation as described in the documentation.
Environment:
Matlab R2012a (I have access to others if necessary)
All Toolboxes/Compiler installed
Ubuntu 12.04 64bit and/or Windows 7 64bit
I am working with the source for a software package written in Matlab (unfortunately its proprietary so no code examples...sorry), and one function briefly uses the Control System Toolbox and the Signal Processing Toolbox.
I have no problem running the code on my personal computer because I have every toolbox installed, however I would like to compile (mex or mcc) JUST the function using those two toolboxes. The goal, of course, is to run the software on a machine without those toolboxes, while leaving the remaining code open to change.
According to matlab, they have no problem with you compiling code that uses almost any toolbox. Here is the list of toolboxes that support mcc compilation:
http://www.mathworks.com/products/compiler/supported/compiler_support.html
The problem arises in that mcc no longer allows compiling with the -x option to create a mex-ed version of the function, so I'm forced to create a C executable (maybe? hopefully not). This particular function takes large matrices as parameters (impractical to write as a command line argument) and returns a structure of cell arrays.
The only way around this (as I see it now) would be to write the arguments (large matrices) to the hard drive in a binary .mat file , have the compiled C binary read in the arguments, run the algorithm, and finally save the return values in another .mat for the parent thread to load back into memory.
This seems totally impractical. I would greatly appreciate alternative suggestions. Please let me know if anything here in unclear. Thanks in advance!
[Edit 1] The codegen package does not support tf.m. It seems like this should be possible (and used to be possible with the mex -x option), but I'm at a loss. Any suggestions would be greatly appreciated!
I think the reason -x is not supported anymore is the fact that Matlab now has a product called "coder", which converts .m files to .c files and can also create .mex files from "suitable" .m files using the option -args to specify the input arguments: http://www.mathworks.com/videos/generating-c-code-from-matlab-code-68964.html
I am totally a newbie in Matlab
I want to ask that when we write a program in Matlab software or IDE and save it with a
.m (dot m) file and then compile and execute it, then that .m (dot m) file is converted into which file? I want to know this because i heard that matlab is platform independent and i did google this but i got converting matlab file to C, C++ etc
Sorry for the silly question and thanks in advance.
Matlab is an interpreted language. So in most cases there is no persistent intermediate form. However, there is an encrypted intermediate form called pcode and there are also the MATLAB compiler and MATLAB coder which delivers code in other high level languages such as C.
edit:
pcode is not generated automatically and should be platform/version independent. But it's major purpose is to encrypt the code, not to compile it (although, it does some partial compilation). To use pcode, you still need the MATLAB environment installed, so in many ways it acts like interpreted code.
But from your follow-up question I guess you don't quite understand how MATLAB works. The code gets interpreted (although with a bit of Just-In-Time Compilation), so there is no need for a persistent intermediate code file: the actual data structures representing your code are maintained by MATLAB. In contrast to compiled languages, where your development cycle is something like "write code, compile & link, execute", the compilation (actually: interpretation) step is part of the execution, so you end up with "write code, execute" in most of the cases.
Just to give you some intuitive understanding of the difference between a compiler and an interpreter. A compiler translates a high level language to a lower level language (let's say machine code that can be executed by your computer). Afterwards that compiled code (most likely stored in a file) is executed by your computer. An interpreter on the other hand, interprets your high level code piece by piece, determining what machine code corresponds to your high level code during the runtime of the program and immediately executes that machine code. So there is no real need to have a machine code equivalent of your entire program available (so in many cases an interpreter will not store the complete machine code, as that is just wasted effort and space).
You could look at interpretation more or less as a human would interpret code: when you try to manually determine the output of some code, you follow the calculations line by line and keep track of your results. You don't generally translate that entire code into some different form and afterwards execute that code. And since you don't translate the code entirely, there is no need to persistently store the intermediate form.
As I said above: you can use other tools such as MATLAB coder to convert your MATLAB code to other high languages such as C/C++, or you can use the MATLAB compiler to compile your code to executable form that depends on some runtime libraries. But those are only used in very specific cases (e.g. when you have to deploy a MATLAB application on computers/embedded devices without MATLAB, when you need to improve performance of your code, ...)
note: My explanation about compilers and interpreters is a quick comparison of the archetypal interpreter and compiler. Many real-life cases are somewhere in between, e.g. Java generally compiles to (JVM) bytecode which is then interpreted by the JVM and something similar can be said about the .NET languages and its CLR.
Since MATLAB is an interpreter, you can write code and just execute it from the IDE, without compilation.
If you want to deploy your program, you can use the MATLAB compiler to create an stand-alone executable or a shared library that you can use in a C++ project. On Windows, MATLAB code would compile to an .EXE file or a .DLL file, respectively.