I need to create XSL-FO from existing Docx file and then convert it to PDF file. I found the XSLT from DOCX4J project. I just want to know if I don't use DOCX4J at all, how can I apply the XSLT to DOCX file to produce XSL-FO file?
You can't readily use docx4j's XLST without using the rest of docx4j, since the XSLT relies heavily on Xalan extension functions which call docx4j's Java code.
Related
When I use Pandoc to read a docx file, it ignores textboxes.They do not seem to be copied to the intermediary format.
How can I make pandoc read the textbox into the intermediary format, so that I can write a filter to include it in the output?
I'm the maintainer of the docx reader in pandoc. I don't think it currently deals with text boxes -- and I'm not sure there's an elegant way to represent them in pandoc's intermediate format. But if you post an issue on pandoc's github issue tracker, along with a sample docx file, I'll take a look and see if it's possible to add it to the reader.
I am currently using Apache FOP and have a stylesheet (possibly from RenderX) that converts Word 2003 XML documents (Saved as XML option) to PDF. However, this does not work for Word 2007 XML documents.
I am looking for options and/or suggestions on how to accomplish one of the following tasks -
Get a stylesheet that will transform Word 2007 XML file to:
Word 2003 XML or
PDF using FOP (using a stylesheet to create xsl-fo)
I am also open to any other options you might have. If possible I would like to do this with little to no cost. However, I am limited to using Java so a C# type option is not possible.
Thanks,
You could try docx4j, an open source Java library (ASL v2) which uses FOP to create PDFs from docx files.
I'm not aware of any style sheets that do this transformation. It would be reasonably sophisticated. If you end up having to engineer another way of doing it, you might want to look at JODConverter (straight conversion - might be your best bet), the OpenOffice UNO API (very manual), JODReports or Docmosis (both can produce documents in various formats). All can produce PDFs from a Java environment. I think they all have free versions.
Hope that helps.
Is there any way to just slap on a header and use a PS file as a PDF, assuming that the PS is very simple and do anything complicated?
I want to do this programmatically, not using ps2pdf.
Thanks.
You can certainly *try" "just slapping on a header" ... but I don't think you'll get too far :-)
Personally, I'd suggest ps2pdf is the best solution (for example, invoke it with ShellExec() or system()).
But if you want a programmatic solution, ps2pdf is just a wrapper around Ghostscript. Have you considered using the Ghostscript libraries?
You cannot wrap a PostScript file into a PDF file.
Although a PDF file looks similar to a PostScript file,
a PDF file must have a special structure, including a cross-reference
table at the end with file offsets to different parts of the PDF file.
To understand the PDF file format you can download the PDF Reference from:
http://partners.adobe.com/public/developer/en/pdf/PDFReference.pdf
If your software generates the PostScript file, maybe you can
extend it to write a PDF file too? It takes some time to understand
the PDF file format but it is not especially difficult if you are familiar with PostScript.
If this is too difficult, then use pdf2ps to do the hard work for you.
I need some help with conversion of DocBook files to Microsoft Word files.
Do I need an XSL file for the transformation?
Yes, you do need an XSL file. You can get XSL files for DocBook from the free DocBook XML distribution. Then, you run a free XSLT transformer such as Saxon. If you run Saxon from a command line, you give it the name of your DocBook file, and the name of one of the stylesheets, and it will transform your file according to the rules in the stylesheet.
What you need to do to transform to Word, is to pick the right stylesheet.
From DocBook XSL: The Complete Guide, here are three possibilities:
Convert to XSL-FO and then use the XMLmind to export to Word. See the XMLmind website for more information.
Use a limited set of tags and then use one of DocBook XML's included stylesheets to output to WordML.
Try to use Jfor to output to RTF, although Jfor no longer appears to be maintained.
And I have one of my own:
As above, use one of DocBook XML's included stylesheets to publish to XSL-FO, then run Apache FOP to convert from XSL-FO to RTF. You will lose the structural information, but you will keep a certain amount of the formatting.
I recently implemented same feature for our users. They use Oxygen XML editor that allows for easy transformations via XSL. I was going to do OOXML but settled on WordML. As a starting point I used roundtrip XSL, but I had to rewrite lots of templates because of existing bugs or just missing functionality. In addition, I did other customization to serve a purpose or for our XML file only.
I would not mind contributing back to the project, but don't really know how to get about it.
I know this is an 11 years old question. But now, in 2022 you can use pandoc to convert DocBook to MS Word (docx).
pandoc --from docbook --to docx --output filename.docx filename.docbook
I am using XQuery to transform DocBook into various formats using XQuery typeswitch library. XQuery uses indexes so I can transform many documents very quickly.
Sphinx supports a few output formats:
Multiple HTML files (with html or dirhtml)
Latex which is useful for creating .pdf or .ps
text
How can I obtain output in a Microsoft Word file instead?
With another doc generator I managed to generate a single html output file and then convert it to Microsoft Word format using the Word application.
Unfortunately I don't know a way to generate either Word or the HTML single-page format.
The solution I use is singlehtml builder like andho mentioned in the comment, then convert the html to docx using pandoc.
The following sample assumes the generated html would be located at _build/singlehtml/index.html
make singlehtml
cd _build/singlehtml/
pandoc -o index.docx index.html
There is a Sphinx extension for generating docx format (which I haven't tested) and a newer one (which I also haven't tested, but looks like it is more actively maintained)
To convert files in restructured text to MSdoc, I use rst2odt and next unoconv. Look next script:
#!/bin/sh
rst2odt $1 $1.odt
unoconv -f doc $1.odt
rm $1.odt
With rst2odt you can use your own stylesheet: unoconv comes with OpenOffice and also allows to apply an Open Office style (template) during the conversion. Simply edit a converted document, change styles, add headers and footers, save that as an ODF Text Document Template (OTT) and use this as part of the conversion, like:
unoconv -f doc -t template.ott $1.odt
to use that template for various conversions later on.
I realize this is an old question, but I found that LibreOffice supports the following way of doing conversion (assuming soffice.exe is in your path):
soffice.exe --invisible --convert-to doc myInputFile.odt
Some things I have read say to use the --headless option rather than --invisible. Both seem to work on Windows.
You can start with the rst2odt.py script and then do the above to convert to an MS Word document.
Here is a link with additional start up options for LibreOffice:
http://help.libreoffice.org/Common/Starting_the_Software_With_Parameters
Here is a link with file types supported by OpenOffice which, I believe, LibreOffice should also support:
http://wiki.services.openoffice.org/wiki/Framework/Article/Filter/FilterList_OOo_3_0
This answer is not a command line solution and it is not obviously the best, but it simply works for me and save my time. After generating html file 1, you can open the generated html with a browser and copy the entire page (Crtl + a and Ctrl+ c) and then run Microsoft Office(or use live version if you don't have Microsoft Windows, like me) and paste (Ctrl+v) to it.
The best option might be rst -> odt -> doc
Convert the sphinx documents into openoffice format.
Then convert open the odt with openoffice and saved to Word. But I don't know how to do this automatically.
This is a workaround using Calibre (https://calibre-ebook.com), which includes a powerful converter. This worked well and most of the formatting are preserved:
Generate epub output in Sphinx make epub
Import epub output into Calibre and then convert epub to docx using inbuilt ebook converter.
Answer is too late for the original question, but people looking at the same problem may find this useful.
I don't now what Sphinx is, but you could create a rtf file or html file or something similar.
See the following blogpost for more information/approaches : OFFICE AUTOMATION
and from there : How to use ASP to generate a Rich Text Format (RTF) document to stream to Microsoft Word
This article describes how you can generate Rich Text Format (RTF) files with ASP script and then stream those files to Microsoft Word. This technique provides an alternative to server-side Automation of Microsoft Word for run-time document generation.
You don't use ASP script (who does :-) ), but for the idea.