I just installed the latest version of PowerGUI (3.6.0.21).
When I try to run any script from inside PowerGUI I get the error message 'The file C:\Sandbox\MyPowerShell.ps1 cannot be loaded. The file C:\Sandbox\MyPowerShell.ps1 is not digitally signed.
I have googled all over for something simple to get around this, but no luck. What do I need to do to get this going?
Also, if I run the script commands from PowerShell directly they work.
AllSigned will not let you run an unsigned script. If you can't change the execution policy then import it as a module.
Save the script as a .psm1 and use Import-Module. It will bypass scripting policy because it's being loaded/run as a module.
Related
I have a powershell file that I have downloaded from ScriptCenter that allows me to control and query virtual desktops on my machine (https://gallery.technet.microsoft.com/scriptcenter/Powershell-commands-to-d0e79cc5).
Using their example, I can run that ps1 file at the start of my script to use those commands that the script creates. All fine here.
The only issue with this is that when I run my script, it asks to confirm to run it. This is something I don't want my script to do.
To work around this, I tried using the "PowerShell" command with "-ExecutionPolicy Bypass" set. This removes the prompt to approve the script, however it stops the script from being loaded into my scripts session as I can't use any of the commands it make available by running it.
How do I either run the script first, without it prompting, or execute the powershell command so that it is run in the session space of my script so that its commands are available?
Thanks
I want to execute .ps1 file in jmeter. I have pass the parameter as in image,but in output facing errors.The filename, directory name, or volume label syntax is incorrect.
Though the filename, directory name are correct.
Here is your problem:
Remove that quotation mark and everything should start working as expected
In general, you are making things overcomplicated.
Why do you need these cmd /c? Why just don't call powershell directly?
Normally powershell is in Windows PATH, there is no need to provide full path to it
So configure your OS Process Sampler as:
Command: powershell
Parameter: D:\Software\apache=jmeter-3.0\apache-jmeter-3.0\bin\TIP.ps1
See How to Run External Commands and Programs Locally and Remotely from JMeter article for more information on invoking 3rd-party processes from your JMeter test.
I know this is an old thread but since the response was not correct for me I found the solution to be this:
Using the OS Process Sampler you need to add as command powershell.exe and as variables exactly the following:
-executionpolicy
bypass
-file
fullpathToYourScript.ps1
This worked perfectly fine for me.
Evening,
I have recently installed TFS2015 and investigating the Release Management integrated solution, but have come across a huge blocker that I just cannot make sense of.
I currently have a RM2013 build working with TFS, RM Server 2013, and Powershell DSC and have setup a new deployment in RM2015, it has a single task in it 'Execute Powershell on Remote Machine' - with a very simple powershell script just writing out a string to the verbose listener.
I have verified that the file is transferred to the Agent working directory as part of the artifact transfer process, and if I call Import-Module "path to script" (Which is what the PowerShellonTargetMachines script seems to do under the hood) in the ISE of the remote server, my script runs perfectly fine - but no matter what I do, in TFS release 2015 I get this error without fail:
[error]The term 'path to script\test.ps1' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. For more info please refer to http://aka.ms/powershellontargetmachinesreadme
Now just to double confirm, the path to the scrpt is 100% correct, I have pasted it into a local ISE on the remote server, and it executes perfectly fine - but from TFS2015 Execute Powershell on Remote Server - it simply fails to run, in fact any script I point at fails to run with the exact same error (I initially thought it might be a DSC component install failure, but even with a simple test script the same issue occurs without fail!
My path in the tasks Deployment>Powershell Script parameter input is:
c:\test_scripts\test.ps1
I have tried with quotes, without quotes, dot sourcing - nothing makes a difference which is making me think something fundamentally is either broken with my installation, or I am simply doing this wrong.
Any ideas gratefully received!!!
The script has to already be on the machine. You can push the script using the "Windows Machine File Copy" task.
Fixed this... make sure you execute the PS1 file on the release agent itself unless copying the powershell files to the remote node via file copy first as indicated below
I have a Jenkins (1.493) project that uses the Jenkins PowerShell build step to execute a PowerShell script. Inside that script I want to invoke another script that is stored inside a file. I have now reduced it to the following:
Script inside Jenkins PowerShell build step:
& "\\stemmer.local\sidevelopment\cvdev\devbase\jenkins\PowerShell\Test.ps1"
Content of Test.ps1:
write-host 'Hello world!'
Whenever this Jenkins project executes, the PowerShell build step hangs indefinitely.
Things I have tried/verified so far:
Adding some output before the invocation of Test.ps1 shows me that the Jenkins PowerShell script is being execute normally up to the point where Test.ps1 is called.
The file Test.ps1 exists and is reachable from the build slave that executes the script. If I alter the file's name, I get the expected error message from PowerShell...
Exchanging the " for ' in the 1st script does not change anything. Also, using dot-sourcing rather than & does not help.
The file Test.ps1 can be executed properly from the powershell itself using the same command line that is being used in the Jenkins PowerShell script.
The execution policy for PowerShell has been set to unrestricted on my development host as well as on the Jenkins build slave.
I've tried replacing the PowerShell build step with a Windows batch command build step that looks like this:powershell.exe -InputFormat None -File "\\stemmer.local\sidevelopment\cvdev\devbase\jenkins\PowerShell\Test.ps1"and played around a little with the parameters of powershell.exe, but the results were - in those cases that were syntactically and otherwise correct as far as I can tell - always the same.
I only found few references to problems that sounded similar, but none of the approaches mentioned elsewhere did help me fix this. I am absolutely puzzled, and wondering whether someone encountered this issue before (and maybe even got a scenario like the one I have in mind running).
Thanks a lot for any input!
Volker
have you tried to set execution policy to bypass ?
Copy the script file locally, then invoke it from within the Jenkins PowerShell plugin - that way it works as expected.
I got some strange behaviour when executing a powershell script.
When I run my script using the ISE it works just fine.
When I open Powershell.exe and run my script it works just fine.
When I open cmd, and start my script using powershell.exe -noexit
./myscript.ps1, myscript works just fine.
When I double-click myscript however, powershell opens for some milliseconds, I see that it shows some error (red font) and the powershell window closes. I'm unable to track down the error causing this problem since the powershell windows closes to fast.
I even tried one single big try-catch block around my hole script, catching any [Exception] and writing it down to a log file. However: the log file is not generated (catch is not called).
How can I track that issue? What could possibly be causing the trouble?
Please note that my execution-policy is set to unrestricted.
Before trying the suggestion invoke this to see your current settings (if you want restore them later):
cmd /c FType Microsoft.PowerShellScript.1
Then invoke this (note that you will change how your scripts are invoked "from explorer" by this):
cmd /c #"
FType Microsoft.PowerShellScript.1=$PSHOME\powershell.exe -NoExit . "'%1'" %*
"#
Then double-click the script, it should not exit, -NoExit does the trick. See your error messages and solve the problems.
But now all your scripts invoked "from explorer" keep their console opened. You may then
remove -NoExit from the above command and run it again or restore your
original settings.
Some details and one good way to invoke scripts in PS v2 is here.
Unfortunately it is broken in PS v3 - submitted issue.
by default, for security reason when you double clic on a .ps1 file the action is : Edit file, not Run file .
to execute your script : right-click on it and choose run with powershell
I also wasn’t able to run a script by double clicking it although running it manually worked without a problem. I have found out that the problem was in the path. When I ran a script from a path that contained spaces, such as:
C:\Users\john doe\Documents\Sample.ps1
The scipt failed to run. Moving the script to:
C:\Scripts\Sample.ps1
Which has no spaces, solved the problem.
This is most likely an issue with your local Execution Policy.
By default, Powershell is configured to NOT run scripts that are unsigned (even local ones). If you've not signed your scripts, then changing your default double-click 'action' in Windows will have no effect - Powershell will open, read the execution policy, check the script's signature, and finding none, will abort with an error.
In Powershell:
Help about_execution_policies
gives you all the gory details, as well as ways to allow unsigned scripts to run (within reason - you'd probably not want to run remote ones, only ones you've saved onto the system).
EDIT: I see at the tail end of your question that you've set Execution Policy to 'unrestricted' which SHOULD allow the script to run. However, this might be useful info for others running into execution policy issues.
If you would catch the error you will most likely see this
The file cannot be loaded. The file is not
digitally signed. The script will not execute on the system. Please
see "Get-Help about_signing" for more details.
Because you are able to run it from the shell you started yourself, and not with the right mouse button click "Run With PowerShell", I bet you have x64 system. Manually you are starting the one version of PowerShell where execution policy is configured, while with the right click the other version of the PowerShell is started.
Try to start both version x64 and x86 version and check for security policies in each
Get-ExecutionPolicy
I was in exactly the same situation as described in the question : my script worked everywhere except when double-clicking.* When I double-clicked a powershell windows would open but then it will close after a second or so. My execution-policy is also set to unrestricted.
I tried the selected answer concerning FType Microsoft.PowerShellScript.1 but it didn't change anything.
The only solution I found was a work around: create a bat file which start the powershell.
Create a file, copy this and modify the path : powershell.exe -File "C:\Users\user\script\myscript.ps1"
Save it as a .bat
Double-click the bat
I also used .ahk to start my powershell with a shorcut and it didn't work when pointing directly to the powershell. I had to point to the .bat