I'm trying to run postgresql on my local machine like I usually do, however it's putting me in a situation where I can't fix. I installed postgresql91 with macports.
These are the three commands I usually have to run to get it running:
sudo sysctl -w kern.sysv.shmall=4096
sudo sysctl -w kern.sysv.shmmax=16777216
sudo su postgres -c "/opt/local/lib/postgresql91/bin/postgres -D /opt/local/var/db/postgresql91/defaultdb -p 55432"
However, it's giving me this error today:
Nets-Mac-Pro:~ emai$ sudo sysctl -w kern.sysv.shmall=4096
Password:
kern.sysv.shmall: 4096 -> 4096
Nets-Mac-Pro:~ emai$ sudo sysctl -w kern.sysv.shmmax=16777216
kern.sysv.shmmax: 16777216 -> 16777216
Nets-Mac-Pro:~ emai$ sudo su postgres -c "/opt/local/lib/postgresql91/bin/postgres -D /opt/local/var/db/postgresql91/defaultdb -p 55432"
postgres cannot access the server configuration file "/opt/local/var/db/postgresql91/defaultdb/postgresql.conf": Permission denied
When I go to /opt/local/var/db/postgresql91/ and do an ls -l this is what comes up:
drwx------ 18 root wheel 612 Jun 28 12:44 defaultdb
So I decided to add the postgres user to the wheel group, and then chmod defaultdb to 770.
drwxrwx--- 18 root wheel 612 Jun 28 12:44 defaultdb
I still get the error:
FATAL: could not open configuration file "/opt/local/var/db/postgresql91/defaultdb/postgresql.conf": Permission denied
And so I change the file rights from:
-rw------- 1 root wheel 19170 Jan 7 11:52 postgresql.conf
to:
-rw-rw---- 1 root wheel 19170 Jan 7 11:52 postgresql.conf
And now it complains that when I run the command again:
Nets-Mac-Pro:~ emai$ sudo su postgres -c "/opt/local/lib/postgresql91/bin/postgres -D /opt/local/var/db/postgresql91/defaultdb -p 55432"
FATAL: data directory "/opt/local/var/db/postgresql91/defaultdb" has wrong ownership
HINT: The server must be started by the user that owns the data directory.
I have no clue how I used to run the postgres server considering the file permissions of the files. Where do I find the data folder that it is hinting me about? Is there a better way to fix this?
Postgres should be owner, and the only user capable of writing to, data directory.
So, do:
sudo chown -Rf postgres:postgres /opt/local/var/db/postgresql91/defaultdb
sudo chmod 700 /opt/local/var/db/postgresql91/defaultdb
and it should be fine.
Related
My PostgreSQL v10 is running on a UBUNTU server. The user group www-data contains the user postgres, as checked by grep ^www-data /etc/group. When I do sudo chown -R :postgres MyPath it works fine, but when I change to sudo chown -R :www-data MyPath it not works.
How to set permissions for postgres user access other user group?
NOTES
As #LaurenzAlbe suggested on comment, the ls -ld myPath is drwxrwxr-x 29 root postgres 4096 Feb 27 15:54 myPath
and id postgres is uid=112(postgres) gid=117(postgres) groups=117(postgres),33(www-data),116(ssl-cert)
On my system, /home and /etc have exactly the same permissions:
$ ls -ld /home /etc
drwxr-xr-x 67 root root 4096 Nov 13 15:59 /etc
drwxr-xr-x 3 root root 4096 Oct 18 13:45 /home
However, Postgres can read one, but not the other:
test=# select count(*) from (select pg_ls_dir('/etc')) a;
count
-------
149
(1 row)
test=# select count(*) from (select pg_ls_dir('/home')) a;
ERROR: could not open directory "/home": Permission denied
Even though the user the DB is running as can, in fact, run ls /home:
$ sudo -u postgres ls /home > /dev/null && echo "ls succeeded"
ls succeeded
What is going on?
My postgres version is 11.5, running on Arch Linux.
I figured it out, it is because Arch's bundled postgresql.service file set ProtectHome=true, causing systemd to use Linux mount namespaces to block the postgres processes from accessing /home.
I am trying to daemonize a celery configuration on an aws instance.
Following the celery docs, I have:
/etc/init.d/celeryd
/etc/default/celerybeat
I've created both a celery user and celery group and set permissions like so:
sudo chown -R celery:celery /var/log/celery/
sudo chown -R celery:celery /var/run/celery/
sudo chown celery:celery /home/sfree/meampy/bin/celery
When I check the file's permissions, it looks good:
(meampy)[]$ ls -l /home/sfree/meampy/bin/celery
-rwxrwxrwx 1 celery celery 237 Sep 13 15:15 /home/sfree/meampy/bin/celery
But when I run the script:
sudo sh -x /etc/init.d/celeryd start
...
Starting celeryd...
+ _chuid -f /var/log/celery/beat.log -l INFO --detach --pidfile=/var/run/celery/beat.pid
+ su celery -c '/home/sfree/meampy/bin/celery beat -f /var/log/celery/beat.log -l INFO --detach --pidfile=/var/run/celery/beat.pid'
bash: /home/sfree/meampy/bin/celery: Permission denied
+ exit 0
If I run the offending line solo, I get the same error.
meampy is the name of my virtualenv. Is the virtualenv the reason I am running into permission problems?
EDIT: the permissions on the virtualenv:
lrwxrwxrwx 1 sfree www-data 24 Sep 1 19:49 meampy -> /usr/local/python/meampy
I added the celery user to the www-data group, still same error
Because virtualenv meampy is belong to sfree, you should modify your celery config file (/etc/default/celeryd)
set
CELERYD_USER="sfree"
CELERYD_GROUP="sfree"
and do not forget
sudo chown -R sfree:sfree /var/log/celery/
sudo chown -R sfree:sfree /var/run/celery/
I believe I ended up mixing up permissions at /etc/ssl directories tree as the last modification was made on 18th November and a day after I could not get my PostgreSQL to work.
When I type in
sudo service postgresql start
I get
FATAL: could not access private key file “/etc/ssl/private/ssl-cert-snakeoil.key”: Permission denied
Checking permissions
~$ sudo -i
~$ ls -la /etc/ssl/private
drw-r----- 2 root ssl-cert 4096 Nov 18 21:10 .
-rwxrwxrwx 1 postgres postgres 1704 Set 4 11:26 ssl-cert-snakeoil.key
Checking group composition
~$ id postgres
uid=114(postgres) gid=127(postgres) groups=127(postgres),114(ssl-cert)
Also I noticed that my ssl-cert-snakeoil.pem file at /etc/ssl/certs/ doesn't have a symlink. I don't know if this makes any difference...
Please, help me sort this out.
Thanks.
Edit: Should it be posted on serverfault instead?
Try adding postgres user to the group ssl-cert
Run the below code to fix your issue:
# > It happened to me and it turned out that I removed erroneously the postgres user from "ssl-cert" group, set it back with
sudo gpasswd -a postgres ssl-cert
# Fixed ownership and mode
sudo chown root:ssl-cert /etc/ssl/private/ssl-cert-snakeoil.key
sudo chmod 740 /etc/ssl/private/ssl-cert-snakeoil.key
# now postgresql starts! (and install command doesn't fail anymore)
sudo /etc/init.d/postgresql start
courtsey to GabLeRoux
Check the output of
$ sudo -u postgres
$ cd /etc/ssl/private
$ ls
If the response is "Permission denied" do
$ chown postgres:ssl-cert /etc/ssl/private/
$ chown postgres:postgres /etc/ssl/private/ssl-cert-snakeoil.key
Only thing that will work if you have changed permissions for /etc/ssl/private
mkdir /etc/ssl/private-copy; mv /etc/ssl/private/* /etc/ssl/private-copy/; rm -r /etc/ssl/private; mv /etc/ssl/private-copy /etc/ssl/private; chmod -R 0700 /etc/ssl/private; chown -R postgres /etc/ssl/private
Copy this whole command (It's a one line code).
If this doesn't work for you, ckeck your postgres user groups by groups postgres and make sure your postgres user have ssl-cert root postgres (Order doesn't matter).
Now lets check your file permissions on ssl/private :
$ ls -la /etc/ssl/
> drwx------ 2 postgres root private
If this is not the output change your permissions with sudo chmod -R 700 /etc/ssl/private and for owners chown -R postgres:root /etc/ssl/private
//Now check permissions on ssl-cert-snakeoil.key,
//which will be inside your **private** directory.
$ ls -la /etc/ssl/private/ssl-cert-snakeoil.key
> -rwx------ 1 postgres root /etc/ssl/private/ssl-cert-snakeoil.key
I was suffering from this issue when attempting to start Postgresql on a remote docker instance. I eventually tracked down the crazy solution here. Basically you have to recreate the directories, chown on it's own doesn't work:
mkdir /etc/ssl/private-copy; mv /etc/ssl/private/* /etc/ssl/private-copy/; rm -r /etc/ssl/private; mv /etc/ssl/private-copy /etc/ssl/private; chmod -R 0700 /etc/ssl/private; chown -R postgres /etc/ssl/private
This error was preventing my PostgreSQL server from running locally.
The following worked for me:
sudo chown postgres:postgres /etc/ssl/private/ssl-cert-snakeoil.key
sudo chmod 600 /etc/ssl/private/ssl-cert-snakeoil.key
Also make sure that /etc/ssl/private has enough permissions.
Some programs can be incredibly pedantic and cost you valuable hours. By running journalctl after sudo systemctl start postgresql I'd see various errors like:
FATAL: could not load private key file "/etc/ssl/private/ssl-cert-snakeoil.key": Permission denied
FATAL: private key file "/etc/ssl/private/ssl-cert-snakeoil.key" must be owned by the database user or root
FATAL: private key file "/etc/ssl/private/ssl-cert-snakeoil.key" has group or world access
DETAIL: File must have permissions u=rw (0600) or less if owned by the database user, or permissions u=rw,g=r (0640) or less if owned by root.
I couldn't make it with work sudo chmod root:root, so I had to settle for sudo chmod postgres:postgres.
EDIT
I haven't tried it, but running deleting and regenerating the snakeoil certificate might work as well:
make-ssl-cert generate-default-snakeoil --force-overwrite
(You may have to run it with sudo, don't know.)
Try setting permissions on the .key file to 600. Postgres doesn't like key files with group or world permissions set. You may also need to change the owner to postgres, though I'm not sure about that.
I am running the postgres server in WSL, and I was facing the error with the ssl-cert file. I managed to make it work by changing the owner of the file to the postgres user I had created, adding the expected user and group IDs to the user as required of the application (111 and 116, respectively, as gleaned from helpful error messages), and voila, I have an active server from within WSL.
sudo useradd postgres
sudo usermod -u 111 -g 116 -a -G ssl-cert postgres
sudo chown postgres /etc/ssl/private/ssl-cert-snakeoil.key
After running the above, there were two more files the user running the server (postgres for me) needed permission to access, both residing in /var/postgresql. I used sudo chown -- twice more to give ownership to postgres. Running sudo service postgresql start will tell you which files you'll need to transfer ownership of through any error messages.
I had other certificates under /etc/ssl/private and hence, changing permissions recursively was out of question.
I tried adding postgres user to ssl-cert group that didn't help either.
I modified the permission of /etc/ssl/private to 716, basically saying that anyone else other than root (user) and ssl-cert (group) can read and execute the directory.
sudo chmod 716 /etc/ssl/private
Then, I modified the ownership of ssl-cert-snakeoil.key
sudo chown postgres:postgres /etc/ssl/private/ssl-cert-snakeoil.key
This worked for me, basically a combination of the answers by #devops and #Noushad
I am trying to execute pg_dump on PostgreSQL 9.0.4 server running on Debian and I am getting the error below:
./pg_dump: error while loading shared libraries: libpq.so.5: cannot open shared object file: No such file or directory
libpq.so.5 is a link to libpq.so.5.3 as shown below
lrwxrwxrwx 1 root root 12 Jun 27 16:24 libpq.so.5 -> libpq.so.5.3
-rwxr-xr-x 1 root root 180749 Jun 21 02:43 libpq.so.5.3
What is it that I am doing wrong?
Try this:
1: Know the path of libpq.so.5
find / -name libpq.so.5
Output example:
/usr/pgsql-9.4/lib/libpq.so.5
If found nothing, check if you have already installed the suitable postgresql-libs for your postgresql version and your OS platform
2: Symbolic link that library in a "well known" library path like /usr/lib:
ln -s /usr/pgsql-9.4/lib/libpq.so.5 /usr/lib/libpq.so.5
Attention:
If your platform is 64 bit, you MUST also symbolic link to 64 bit libraries path:
ln -s /usr/pgsql-9.4/lib/libpq.so.5 /usr/lib64/libpq.so.5
3: Be happy !
In which directory are these libpq files? You can try setting environment variable LD_LIBRARY_PATH to point to this directory or make sure it's in standard place.
Also, why isn't the libpq.so.5 link shown in the "as shown below" section? Maybe you should just run ldconfig?
Ubuntu 21.10+
Since this is the top search result for the error. I'll add an updated answer. I received the error when trying to start a django server.
I hadn't installed the postgres stuff.
Try:
sudo apt install libpq-dev
See:
https://packages.ubuntu.com/impish/libpq-dev
I was getting the same error message on Postgres 9.5 on RHEL 6.5 which lead me to this post. But a find for the file libpq.so.5 returned nothing, which made things more confusing.
In the end the following symbolic links made it run
ln -s /opt/rh/rh-postgresql95/root/usr/lib64/libpq.so.rh-postgresql95-5 /usr/lib64/libpq.so.rh-postgresql95-5
ln -s /opt/rh/rh-postgresql95/root/usr/lib64/libpq.so.rh-postgresql95-5 /usr/lib/libpq.so.rh-postgresql95-5
These paths are for RHEL, use find / -name libpq.so to location your installation and add it to the same destination folders /usr/lib/ and /usr/lib64/ using the orginal file name.
The root cause appears that the installation did not place this file into a shared location.
This error probably occurs because of $LD_LIBRARY_PATH environment variable is not set.
When you install your application from source code using prefix (./configure --prefix=/some/path), you have to inform where your lib/ path is. I just found a solution for this, and I added this variable to postgres user init bash script:
printf 'export PATH=$PATH:/opt/apl/pgsql/bin\nexport LD_LIBRARY_PATH=/opt/apl/pgsql/lib:$LD_LIBRARY_PATH\n' > /etc/profile.d/postgres.sh
redhat 7 is missing few steps after installing yum install pgadmin4:
sudo ln -s /usr/lib64/pgdg-libpq5/lib/libpq.so /usr/lib64/libpq.so.5
sudo ln -s /usr/lib64/pgdg-libpq5/lib/libpq.so /usr/lib/libpq.so.5
sudo chown -R apache:apache /var/lib/pgadmin4/
then you can run
sudo python3 /usr/lib/python3.6/site-packages/pgadmin4-web/setup.py
and if all successful:
systemctl start httpd
systemctl status httpd
apachectl configtest
and make sure the httpd starts ok
I had exactly the same problem with the pg 9.6 install. I fixed it like this. Rather irritating that the installer doesn't factor this in.
***********post yum install & running initdb *********
Success. You can now start the database server using:
/opt/rh/rh-postgresql96/root/usr/bin/pg_ctl -D /var/opt/rh/rh-postgresql96/lib/pgsql/data -l logfile start
-bash-4.2$ /opt/rh/rh-postgresql96/root/usr/bin/pg_ctl -D /var/opt/rh/rh-postgresql96/lib/pgsql/data -l logfile start
/opt/rh/rh-postgresql96/root/usr/bin/pg_ctl: **error while loading shared libraries: libpq.so.rh-postgresql96-5: cannot open shared object file: No such file or directory**
-bash-4.2$ id
uid=26(postgres) gid=26(postgres) groups=26(postgres) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
**************
-bash-4.2$ cat LibFix
ln -s /opt/rh/rh-postgresql96/root/usr/lib64/libpq.so.rh-postgresql96-5 /usr/lib64/libpq.so.rh-postgresql96-5
ln -s /opt/rh/rh-postgresql96/root/usr/lib64/libpq.so.rh-postgresql96-5 /usr/lib/libpq.so.rh-postgresql96-5
**************
[root#****lab ~]# ln -s /opt/rh/rh-postgresql96/root/usr/lib64/libpq.so.rh-postgresql96-5 /usr/lib64/libpq.so.rh-postgresql96-5
[root#****lab ~]# ln -s /opt/rh/rh-postgresql96/root/usr/lib64/libpq.so.rh-postgresql96-5 /usr/lib/libpq.so.rh-postgresql96-5
[root#****lab ~]# su - postgres
Last login: Thu Apr 5 08:57:21 CEST 2018 on pts/0
-bash-4.2$ /opt/rh/rh-postgresql96/root/usr/bin/pg_ctl -D /var/opt/rh/rh-postgresql96/lib/pgsql/data -l logfile start
server starting
-bash-4.2$ ps -ef | grep postgres
root 12778 7883 0 09:07 pts/0 00:00:00 su - postgres
postgres 12779 12778 0 09:07 pts/0 00:00:00 -bash
postgres 12802 1 0 09:08 pts/0 00:00:00 /opt/rh/rh-postgresql96/root/usr/bin/postgres -D /var/opt/rh/rh-postgresql96/lib/pgsql/data
postgres 12803 12802 0 09:08 ? 00:00:00 postgres: logger process
postgres 12805 12802 0 09:08 ? 00:00:00 postgres: checkpointer process
postgres 12806 12802 0 09:08 ? 00:00:00 postgres: writer process
postgres 12807 12802 0 09:08 ? 00:00:00 postgres: wal writer process
postgres 12808 12802 0 09:08 ? 00:00:00 postgres: autovacuum launcher process
postgres 12809 12802 0 09:08 ? 00:00:00 postgres: stats collector process
postgres 12810 12779 0 09:08 pts/0 00:00:00 ps -ef
-bash-4.2$ id
uid=26(postgres) gid=26(postgres) groups=26(postgres) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
-bash-4.2$ psql
psql (9.6.5)
postgres=# \conninfo
You are connected to database "postgres" as user "postgres" via socket in "/var/run/postgresql" at port "5432".