Running a tool, I had to install Perl. Well, I've installed Strawberry-Perl and some modules fine. But when I make Statistics::Basic, it fails.
The process to make the module:
perl Makefile.PL (OK)
dmake test (FAIL)
C:\Perl\perl\lib\Basic>dmake test C:\Perl\perl\bin\perl.exe
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib',
'blib\arch')" t/*.t t/05_load_them.t ................... # Test 1 got:
"Can't locate Number/Format.pm in #INC (you may need to install the
Number::Format module ) (#INC contains:
C:\Perl\perl\lib\Basic\blib\lib
C:\Perl\perl\lib\Basic\blib\arch C:/Perl/perl/site/lib
C:/Perl/perl/vendor/lib C:/Perl/perl/lib .) at
C:\Perl\perl\lib\Basic\blib\lib/Statistics/Basic.pm line
8.\nBEGIN failed--compilation aborted at C:\Perl\pe rl\lib\Basic\blib\lib/Statistics/Basic.pm line 8.\nCompilation
failed in require at
C:\Perl\perl\lib\Basic\blib\lib/Statistics/Bas
ic/_OneVectorBase.pm line 7.\nBEGIN failed--compilation aborted at
C:\Perl\perl\lib\Basic\blib\lib/Statistics/Basic/_OneVectorBase.pm
line 7.\nCompilation failed in require at (eval 1) line 2.\nBEGIN
failed--compilation aborted at (eval 1) line 2.\n" (t/05_load_them.t
at li ne 12) t/05_load_them.t ................... 1/12 # Expected: "" #
t/05_load_them.t line 12 is: ok($#, "");
. . .
I don't know Perl and I have no idea about the problem. How can I install this module?
The error message says
you may need to install the Number::Format module
So do this first. As there could be more dependencies, it's usually better to use a tool which is automatically resolving all dependencies, e.g. CPAN.pm:
cpan Statistics::Basic
I've got the same problem with the module Statistics::Basic, so tried to install Number::Format and again problem dmake test failed!
So I've just tried make install command, and then install modules, and it works.
I am in Windows. It is solved by executing dmake install manually.
# install will be failed but you can get source downloaded
> cpan install Number::Format
> cd c:\strawberry\cpan\build
# replace [version] and [random string] with what you see in the directory
> cd Number-Format-[version]-[random string]
# ignore `dmake test`
> dmake install
Related
I have installed ActivePerl in order to run a bioinformatic tool.
after running the tool on Windows PowerShell I got this message:
Perl module Archive::Extract (in core since 2007-07-07) is not installed on this machine!
Perl modules are available for download at http://www.cpan.org/
If you have CPAN installed try the following: cpan install
Archive::Extract exit
If you are on Mac or Unix you should run cpan with sudo: sudo cpan
install Archive::Extract exit
So I tried to install it:
cpan
install Archive::Extract
and got this:
"C:\Perl64\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef Test::Harness::Switches; test_harness(0, 'blib\lib', 'blib\arch')" t/.t
t/01_Archive-Extract.t .. # Older versions of Archive::Zip may cause File::Spec warnings
See bug #19713 in rt.cpan.org. It is safe to ignore them
t/01_Archive-Extract.t .. 87/?
As I'm not adept at this I thought that I should try to install again the Archive::Zip
install Archive::Zip
but I got :
t/25_traversal.t .............. 1/41
Failed test 'Tree extraction aborted'
at t/25_traversal.t line 97.
got: '0'
expected: '2'
Looks like you failed 1 test of 41.
t/25_traversal.t .............. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/41 subtests
(less 32 skipped subtests: 8 okay)
Test Summary Report
t/25_traversal.t (Wstat: 256 Tests: 41 Failed: 1)
Failed test: 16
Non-zero exit status: 1
Files=25, Tests=346, 18 wallclock secs ( 0.19 usr + 0.13 sys = 0.31 CPU)
Result: FAIL
Failed 1/25 test programs. 1/346 subtests failed.
dmake.exe: Error code 129, while making 'test_dynamic'
Could you please explain what's the particular problem in order to understand it and how can I solve it?
I don't know if it's a naive question as I have just started learning about command line tools, Linux, Perl etc.
Active Perl uses the ppm script to install modules, mixing this with cpan can cause the problems you have seen above. You may find that using Strawberry Perl works better for you as this comes with a c compiler that will allow you to install non pure Perl modules from cpan
In order to install a package called PrimerMapper for designing primers on Ubuntu 14.04, I need to install a perl module called Tkx but facing trouble in installing it. So, kindly assist me in resolving this bug.
For your quick and easy reference, I am pasting complete commands of installation. Thanks a lot
**adnan#adnan-Inspiron-N5110[Tkx-1.09]** sudo perl Makefile.PL
Writing Makefile for Tkx
Writing MYMETA.yml and MYMETA.json
**adnan#adnan-Inspiron-N5110[Tkx-1.09]** sudo make
Skip blib/lib/Tkx/Tutorial.pod (unchanged)
Skip blib/lib/Tkx.pm (unchanged)
Skip blib/lib/Tkx/MegaConfig.pm (unchanged)
Skip blib/lib/Tkx/LabEntry.pm (unchanged)
cp tkx-prove blib/script/tkx-prove
/usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/tkx-prove
cp tkx-ed blib/script/tkx-ed
/usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/tkx-ed
Manifying blib/man1/tkx-ed.1p
Manifying blib/man3/Tkx::MegaConfig.3pm
Manifying blib/man3/Tkx::LabEntry.3pm
Manifying blib/man3/Tkx::Tutorial.3pm
Manifying blib/man3/Tkx.3pm
**adnan#adnan-Inspiron-N5110[Tkx-1.09]** sudo make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/LabEntry.t ...... 1/2 (in cleanup) Can't call method "DeleteCommand" on an undefined value at /usr/local/lib/perl/5.18.2/Tcl.pm line 655 during global destruction.
t/LabEntry.t ...... ok
t/mega-config.t ... ok
t/mega.t .......... ok
t/nul-char.t ...... ok
t/tcl-callback.t .. 1/7 (in cleanup) Can't call method "DeleteCommand" on an undefined value at /usr/local/lib/perl/5.18.2/Tcl.pm line 655 during global destruction.
t/tcl-callback.t .. ok
t/tcl.t ........... 1/18 # Test 18 got: "Tcl error 'Foo at /usr/local/lib/perl/5.18.2/Tcl.pm line 585.\n' while invoking scalar result call:\n\t\"error Foo\" at /usr/local/lib/perl/5.18.2/Tcl.pm line 588.\n\tTcl::call('Tcl=SCALAR(0x1b2ce48)', 'error', 'Foo') called at /media/windows/NGS/GATK_FINAL_PIPELINE/PrimerMapper-master/Tkx-1.09/blib/lib/Tkx.pm line 329\n\teval {...} called at /media/windows/NGS/GATK_FINAL_PIPELINE/PrimerMapper-master/Tkx-1.09/blib/lib/Tkx.pm line 329\n\tTkx::i::call('error', 'Foo') called at /media/windows/NGS/GATK_FINAL_PIPELINE/PrimerMapper-master/Tkx-1.09/blib/lib/Tkx.pm line 51\n\tTkx::AUTOLOAD('Foo') called at t/tcl.t line 38\n\teval {...} called at t/tcl.t line 38\n" (t/tcl.t at line 39)
# Expected: "Foo at t/tcl.t line 38.\n"
# t/tcl.t line 39 is: ok($#, "Foo at #{[__FILE__]} line #{[__LINE__ - 1]}.\n");
t/tcl.t ........... Failed 1/18 subtests
t/tk.t ............ 12/12 (in cleanup) Can't call method "DeleteCommand" on an undefined value at /usr/local/lib/perl/5.18.2/Tcl.pm line 655 during global destruction.
t/tk.t ............ ok
t/utf8.t .......... ok
Test Summary Report
-------------------
t/tcl.t (Wstat: 0 Tests: 18 Failed: 1)
Failed test: 18
Files=8, Tests=54, 9 wallclock secs ( 0.15 usr 0.03 sys + 1.85 cusr 0.31 csys = 2.34 CPU)
Result: FAIL
Failed 1/8 test programs. 1/54 subtests failed.
make: *** [test_dynamic] Error 255
GAAS/Tkx-1.09.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports GAAS/Tkx-1.09.tar.gz
Running make install
make test had returned bad status, won't install without force
Failed during this command:
GAAS/Tkx-1.09.tar.gz : make_test NO
The error is that the tests of the module don't pass successfully.
One thing I would try first is to try to install the module with cpan or cpanminus (cpan Tkx or cpanm Tkx). You (or the Makefile.PL) may have missed something that could be causing this error.
I see you already opened a bug report on CPAN. You can see in cpantesters that this module has the tests broken (you could check with your particular Perl version) and there is also another bug report from 5 years ago reporting broken tests for the very same version that's currently on CPAN (1.09).
Considering this I think your options is to skip the tests and see if it works for your purposes.
I recently adopted Tkx and published release 1.10, which allows installation to proceed despite the t/tcl.t test 18 failure.
The test failure appears to have been caused by unexpected but minor changes to error message formatting in newer Tcl.pm. Pending the issue actually being fixed, it is not something which Tkx should abort installation over.
There's already a packaged version of Tkx for Ubuntu, so all it should take to get Tkx and any of its dependencies is:
sudo apt-get install libperl-tkx
I am tiring to run multiple jobs in parallel by using perl script which use Parallel:ForkManager.
#!/usr/bin/perl -w
use Parallel::ForkManager;
my #make_obj = qw(
mode1_testlist
mode1_testlist1
mode1_testlist2
);
my $fm = $pm = Parallel::ForkManager-> new(3);
foreach my $obj (#make_obj) {
$fm->start and next;
print("make regression MODE=1 MODELIST=$make_obj");
$fm->finish();
}
but it throws me below error.
Can't locate Parallel/ForkManager.pm in #INC (#INC contains: /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .) at parallel_run.pl line 3.
BEGIN failed--compilation aborted at parallel_run.pl line 3.
I have downloaded Parallel-ForkManager-1.03.tar.gz but I don't know where to keep it I mean how to install it.
I tried perl Makefile.PL && make test && make install:
WARNING: META_MERGE is not a known parameter.
WARNING: BUILD_REQUIRES is not a known parameter.
WARNING: LICENSE is not a known parameter.
Checking if your kit is complete...
Looks good
'BUILD_REQUIRES' is not a known MakeMaker parameter name.
'LICENSE' is not a known MakeMaker parameter name.
'META_MERGE' is not a known MakeMaker parameter name.
Writing Makefile for Parallel::ForkManager
cp lib/Parallel/ForkManager.pm blib/lib/Parallel/ForkManager.pm
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"test_harness(0,'blib/lib', 'blib/arch')" t/*.t
t/00-load.............ok 1/3 (in cleanup) Undefined subroutine
&File::Path::remove_tree called at /h/altera_dump2/vjain419/regression_flow_bck
/regression_flow/MSS1/hw/verif/top_/00e/tools/Parallel-ForkManager-1.03/blib
/lib/Parallel /ForkManager.pm line 662.
t/00-load.............ok
t/01-utf8-all.........skipped
all skipped: Need utf8::all for this test crashing on Windows
t/02-callback.........Array found where operator expected at t/02-callback.t line
21,at end of line
(Do you need to predeclare explain?)
syntax error at t/02-callback.t line 21, near "explain #out"
xecution of t/02-callback.t aborted due to compilation errors.
# Looks like your test died before it could output anything.
t/02-callback.........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
Failed 2/2 tests, 0.00% okay
t/03-callback-data....Array found where operator expected at t/03-callback-data.t line 13, at end of line
(Do you need to predeclare explain?)
syntax error at t/03-callback-data.t line 13, near "explain #out"
Execution of t/03-callback-data.t aborted due to compilation errors.
# Looks like your test died before it could output anything.
t/03-callback-data....dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
t/02-callback.t 255 65280 2 4 200.00% 1-2
t/03-callback-data.t 255 65280 1 2 200.00% 1
1 test skipped.
Failed 2/4 test scripts, 50.00% okay. 3/6 subtests failed, 50.00% okay.
make: *** [test_dynamic] Error 255
Just use
cpan Parallel::ForkManager
Alternatively, execute the following command after making sure you have its dependencies (POSIX, Storable, File::Spec, File::Temp, File::Path 2.00 and Test::More 0.81_01) installed:
tar xvzf Parallel-ForkManager-1.03.tar.gz
cd Parallel-ForkManager-1.03
perl Makefile.PL && make test && make install
Like some of the comments on the accepted answer suggest, there can be a dependency missing. The following worked for me:
% cpan Test::More
% cpan Parallel::ForkManager
I am trying to use HTML::WikiConverter::MediaWiki which I have installed using yum install perl-HTML-WikiConverter-MediaWiki.noarch.
According to the perldoc should I be able to
use HTML::WikiConverter;
my $wc = new HTML::WikiConverter( dialect => 'MediaWiki' );
but then I get
Can't locate HTML/WikiConverter.pm in #INC (#INC contains: /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .) at ./test.pl line 3.
BEGIN failed--compilation aborted at ./test.pl line 3.
If I try
use HTML::WikiConverter::MediaWiki;
my $wc = new HTML::WikiConverter( dialect => 'MediaWiki' );
then I get
Can't locate object method "new" via package "HTML::WikiConverter" at ./test.pl line 4.
If I try
use HTML::WikiConverter::MediaWiki;
my $wc = new HTML::WikiConverter::MediaWiki( dialect => 'MediaWiki' );
then I get
Can't locate object method "new" via package "HTML::WikiConverter::MediaWiki" at ./test.pl line 4.
Question
Can anyone see what's wrong?
Update
[root#rt ~]# cpan HTML::WikiConverter
Reading '/root/.cpan/Metadata'
Database was generated on Fri, 09 Mar 2012 16:12:01 GMT
Running install for module 'HTML::WikiConverter'
Running make for D/DI/DIBERRI/HTML-WikiConverter-0.68.tar.gz
Checksum for /root/.cpan/sources/authors/id/D/DI/DIBERRI/HTML-WikiConverter-0.68.tar.gz ok
CPAN.pm: Building D/DI/DIBERRI/HTML-WikiConverter-0.68.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for HTML::WikiConverter
Writing MYMETA.yml and MYMETA.json
cp lib/HTML/WikiConverter.pm blib/lib/HTML/WikiConverter.pm
cp lib/HTML/WikiConverter/Normalizer.pm blib/lib/HTML/WikiConverter/Normalizer.pm
cp lib/HTML/WikiConverter/WebApp.pm blib/lib/HTML/WikiConverter/WebApp.pm
cp lib/HTML/WikiConverter/Dialects.pod blib/lib/HTML/WikiConverter/Dialects.pod
cp bin/html2wiki blib/script/html2wiki
/usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/html2wiki
Manifying blib/man1/html2wiki.1
Manifying blib/man3/HTML::WikiConverter.3pm
Manifying blib/man3/HTML::WikiConverter::Normalizer.3pm
Manifying blib/man3/HTML::WikiConverter::Dialects.3pm
Manifying blib/man3/HTML::WikiConverter::WebApp.3pm
DIBERRI/HTML-WikiConverter-0.68.tar.gz
/usr/bin/make -- OK
'YAML' not installed, will not store persistent state
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t ........... 1/1 # Testing HTML::WikiConverter 0.68, Perl 5.008008, /usr/bin/perl
t/00-load.t ........... ok
t/01-normalizer.t ..... ok
t/01-wikiconverter.t .. 1/53 request for <http://diberri.dyndns.org/wikipedia/html2wiki-old/test.html> failed at t/01-wikiconverter.t line 162
# Looks like you planned 53 tests but ran 35.
# Looks like your test exited with 22 just after 35.
t/01-wikiconverter.t .. Dubious, test returned 22 (wstat 5632, 0x1600)
Failed 18/53 subtests
t/boilerplate.t ....... ok
t/pod-coverage.t ...... ok
t/pod.t ............... ok
Test Summary Report
-------------------
t/01-wikiconverter.t (Wstat: 5632 Tests: 35 Failed: 0)
Non-zero exit status: 22
Parse errors: Bad plan. You planned 53 tests but ran 35.
Files=6, Tests=53, 1 wallclock secs ( 0.06 usr 0.04 sys + 0.60 cusr 0.12 csys = 0.82 CPU)
Result: FAIL
Failed 1/6 test programs. 0/53 subtests failed.
make: *** [test_dynamic] Error 255
DIBERRI/HTML-WikiConverter-0.68.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports DIBERRI/HTML-WikiConverter-0.68.tar.gz
Running make install
make test had returned bad status, won't install without force
[root#rt ~]#
You don't have HTML::WikiConverter installed. So, install it. From the command line, do
cpan HTML::WikiConverter
and not only will HTML::WikiConverter be installed, but any missing prerequisites should be installed as well.
Also, depending your user permissions, you may need to run that command as root (ie sudo cpan HTML::WikiConverter).
It sounds like you don't have the base behavior HTML::WikiConverter installed in a place where you need it. I don't know why the use base in HTML::WikiConverter::MediaWiki isn't failing, though. HTML::WikiConverter is a separate distribution from HTML::WikiConverter::MediaWiki and HWM uses HW's constructor, so it makes sense that if you can't load this module, Perl does not recognize a dispatch for new.
When you ran yum install perl-HTML-WikiConverter-MediaWiki.noarch did you get any output that mentioned installing perl-HTML-WikiConverter?
What output do you get from running rpm -q perl-HTML-WikiConverter and rpm -q perl-HTML-WikiConverter-MediaWiki.
Which version of Perl are you running (perl -v), where is it installed (which perl) and how was it installed (using yum or by downloading source code and compiling it)?
I suspect your system is getting confused between yum-installed CPAN modules and cpan-install CPAN modules. It's never a good idea to mix the two on the same system. If you want to use the system version of Perl then only install CPAN modules using yum. If you want to install CPAN modules using cpan (or cpanp or cpanm) then build your own version of Perl and install it away from the standard Perl location.
I have been trying to install GD library for perl to no avail a long while now. I've tried every little thing I could find on the internets but nothing. I am trying to get Circos graphs which require the GD package.
When I try to install it through CPAN it gives me this error:
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/GD.t ........ 1/12 Can't load './blib/arch/auto/GD/GD.bundle' for module GD: dlopen(./blib/arch/auto/GD/GD.bundle, 2): Symbol not found: _jpeg_resync_to_restart
Referenced from: /usr/lib/libgd.2.dylib
Expected in: flat namespace
in /usr/lib/libgd.2.dylib at /opt/local/lib/perl5/5.14.1/darwin-multi-2level/DynaLoader.pm line 194.
at t/GD.t line 14
Compilation failed in require at t/GD.t line 14.
BEGIN failed--compilation aborted at t/GD.t line 14.
t/GD.t ........ Dubious, test returned 2 (wstat 512, 0x200)
Failed 12/12 subtests
t/Polyline.t .. Can't load '/Users/zehira/.cpan/build/GD-2.46-mp3nuO/blib/arch/auto/GD/GD.bundle' for module GD: dlopen(/Users/zehira/.cpan/build/GD-2.46-mp3nuO/blib/arch/auto/GD/GD.bundle, 2): Symbol not found: _jpeg_resync_to_restart
Referenced from: /usr/lib/libgd.2.dylib
Expected in: flat namespace
in /usr/lib/libgd.2.dylib at /opt/local/lib/perl5/5.14.1/darwin-multi-2level/DynaLoader.pm line 194.
at /Users/zehira/.cpan/build/GD-2.46-mp3nuO/blib/lib/GD/Polyline.pm line 45
Compilation failed in require at /Users/zehira/.cpan/build/GD-2.46-mp3nuO/blib/lib/GD/Polyline.pm line 45.
BEGIN failed--compilation aborted at /Users/zehira/.cpan/build/GD-2.46-mp3nuO/blib/lib/GD/Polyline.pm line 45.
Compilation failed in require at t/Polyline.t line 10.
BEGIN failed--compilation aborted at t/Polyline.t line 10.
t/Polyline.t .. Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Test Summary Report
-------------------
t/GD.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
Parse errors: Bad plan. You planned 12 tests but ran 1.
t/Polyline.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
Files=2, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.04 cusr 0.01 csys = 0.08 CPU)
Result: FAIL
Failed 2/2 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 2
LDS/GD-2.46.tar.gz
make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports LDS/GD-2.46.tar.gz
Running make install
make test had returned bad status, won't install without force
Failed during this command:
LDS/GD-2.46.tar.gz : make_test NO
I tried to reinstall jpeg libraries with --enable-shared --enable-static options but didn't help either. I also installed a MacPorts version of perl thinking I might have messed up the perl installation that comes with my mac. Anyone have any idea why this might be happening?
(yes, I'm relatively new to the world of terminal and all this and am still trying to navigate my way around)
Thanks!
I have solved this issue using homebrew to install libgd first, and then cpan. It worked perfectly.
brew install libgd
cpan install GD
i installed it step by step without any problem by
http://zientzilaria.herokuapp.com/blog/2012/06/03/installing-circos-on-os-x/
maybe that helps...
Firstly I'm also a circos user :) It's really not simple to install circos on win/linux/mac for perl and the modules circos needs .
Above my practice you'd better do like this from very begin:
install perl (choose the very popular new version)
install circos (ref http://circos.ca/software/installation/)
install the modules circos needs but exclude GD : this is easy, just download and copy, or install by CPAN (ref http://www.rcbowen.com/imho/perl/modules.html)
install GD : GD is a special module (not platform independently ), and you should build it on your OS and then install : http://www.sharedproteomics.com/forum/showthread.php?325-Installing-GD-on-Mac-OSX-10.6
It looks like your problem is at step3 !!! If Google can not help you to make it, another way to request help is using circos's google group: http://groups.google.com/group/circos-data-visualization there Martin and other circos users will help you directly.
For prerequisite of Circos installation, the documentation from CircosAPI is very helpful. It was written for OSX 10.8, and still works for OS X Yosemite.
http://kylase.github.io/CircosAPI/os-x-installation-guide/
You need libgd. If you are using ubuntu & you can get it using
sudo apt-get install libgd-gd2-perl
Then you can follow the normal procedure as mentioned in circos installation instructions.