When I type {space}i{space} I would love for this to automatically convert this to the capital "I". I've scanned all through the AHK syntax on hotstrings and I'm very unclear how i can incorporate leading and trailing spaces into my hotstrings.
this does not work as I expect it to. It only works when the line starts with "i"
:C: i :: I `
This doesn't work either
:CO: i:: I `
Neither does this:
:C: i:: I
You need the * option so you don't need to type an ending character to trigger the hotstring. And the ? option so it trigger when it's inside of another word. (Might not seem like it is inside of another word e.g. here test i , but it is since the leading space is included)
Also the C option in there couldn't hurt I guess. Will just make it so it doesn't do a redundant replace if you capitalize the i yourself.
:*?C: i :: I `
I'd like to add a suffix to all occurrences of a variable in a file (eg. pluralizing a variable number --> numbers).
VSCode offers a multiselect option thru the default "cmd+d", or editor.action.addSelectionToNextFindMatch. However, after I do this over all occurrences of number, the entire variable is selected. I really just need the cursor to be at the very end, so I can add an s. I would like not have to retype numbers.
How can I achieve this?
As an alternative, I use a regex:
\b(var1|var2|var3)\b
And I replace it with the same content $1 (since I capture the variable name in a group with ()) followed by 's': $1s
I would just copy the variable first. So:
Double-click your variable and Ctrl-C
Ctrl-F2 selects all occurences
Ctrl-V and add your 's'
The regex method is better if you have a few variables to change, but not if you have only one or two to change. Really simple to create a macro if you would be doing this a lot - you could get it down to a single keychord.
[This unfortunately selects occurrences of var1 and someOtherVar1 (the Var1 part) - so if this is a problem better to use a regex as it is easier to exclude instances of the var1 term appearing within another word, like someVar1 that you do not intend to change.]
I'm doing a lot of php-programming in Netbeans. It occurs like at least once a day that I write emtpy instead of empty (dunno why). Costs me each time at least 15s to test, see and find the mistake and correcting it (and I'm really annoyed each time).
Is there an option to automatically replace every emtpy with empty or at least highlighting it (like with big fat flashy arrows? :P)
Couldn't find anything of the sort with a quick search.
Thanks for any suggestion!
P.S.: I want it to be like in Word, when you type the first two characters in CApital it will auto replace it by only the first letter Capital. Please see comments as well, before replying.
No a real solution but maybe an improvement of your situation:
You could (mis)use a code template for that: Tools / Options / Editor / Code Templates. Select your language and create a new abbreviation (empyt) and as "expanded text" you use "empty". Make sure to set "Expand Template on" to "Space".
Drawback is, that it only works if you are pressing space after typing "empty" or "empyt".
I want to use the Search and Replace dialogue in Rubymine, or something similar to replace something like "Scenario:" with "#Desktop\nScenario"
I'm trying to replace every instance of Scenario: in a large Cucumber test suite with
#desktop
Scenario:
Any best ways to do this?
Update:
Thanks to #ryan2johnson9 comment, I realise there's now an easier option (tested on 2017.3).
By clicking on the "New Line" (or using the shortcut Ctrl+Shift+Enter / Alt+Enter), the input becomes multilines.
Original Answer
In the search and replace box, if you tick the "Regex" option you can do:
Search: "Scenario:"
Replace by: "#desktop\nScenario:"
The only trick is to tick the "Regex" option :)
Rubymine has macros (http://www.jetbrains.com/ruby/webhelp/binding-macros-with-keyboard-shortcuts.html) but I dont think they are powerful enough for this example.
It's possible that you could solve it with some elaborate feature hidden inside Rubymine, but I think it would be a lot easier to do this with a tool like perl/sed from the Terminal. If you are using Windows I assume you could search the net and find a text search/replace tool that fits your need.
In OSX I there are a bunch of Text Substitutions app too.
I would go that route since Rubymines macro tool isnt up to the task.
Here's a cheap and sleazy alternative:
Copy a newline character from between two empty lines in the file being edited. Temporarily add two empty lines if you don't have any.
Set up search/replace and enter the string you want to replace into the search text input box.
Paste the newline you just copied into the replacement text box plus whatever other text you want. You will be able to see the height of the replacement text input box grow vertically by one line due to the newline.
Perform the search/replace.
For this, the use of the Rubymine regex is optional.
I have a Word document with fields of the reference variety, which occur in the form "[field].[field]"--in other words, there's a period between the two fields. I want to globally replace this with a space.
Word offers the ^d special character to search for fields, but for some reason the query "^d.^d" does not find anything. However, ".^d" does. Now comes the problem, however--what do I specify as the replacement text in order to retain the field code? If using regular expressions, I could use a "Find What Expression" such as \1, but with regexp ("wild card") mode the ^d is not permitted.
I guess I could write a macro...
I would like to add to Bibadia's solution.
An example of an index entry field; we want to change a name we misspelled.
Make sure hidden formatting is displayed (toggle with SHIFT+CTRL+F8).
Make sure wildcards option is not selected. To search for fields, use the opening and closing field braces code (optionally use ^w for spaces, as Bibadia suggested):^19 XE "Deo, John" ^21
Replace won't recognize field braces character, but will allow to insert the clipboard's content. ;). To do that, insert in text the correct entry. CTRL+F9 to insert field and type:XE "Doe, John"
Select the field above and copy
Use ^c in the replace box
Hit Replace All
Ta-da!
It's usually better to go the macro route when finding fields because, as you say, the find algorithm that Word uses doesn't work the way you might hope with fields.
But if you know exactly what the fields contain, you can specify a search pattern that will probably work (however not in wildcard mode).
For example, if you want to look for figure number field pairs such as
{ STYLEREF 1 \s }.{ SEQ Figure \* ARABIC \s 1 }
(which would typically be the same set of fields everywhere in the document)
If you only really need to look for the following:
{ STYLEREF 1 \s }.<any field>
you could ensure that field codes are displayed and search for
^d STYLEREF 1 \s ^21.^d
or
^19 STYLEREF 1 \s ^21.^19
If you need to be more precise, you can spell out the second field as well.
"^d" only works for finding the field beginning, not the field end.
It's a shame that ^w wants to find at least 1 whitespace character because otherwise it would be more robust to look for
^19^wSTYLEREF^w1^w\s^w^21.^19
Perhaps someone else knows how to work around that without using wildcards?
Torzaburo,
I suggest that you do this using a macro. You can start by recording the macro, and later refining your processing steps within the macro.
First turn on the hidden characters by navigating to Home > Paragraph > toggle the show/hide Paragraph symbol. Also, select all and toggle the field codes on (right-click and select "Toggle Field Codes".
Open a new blank Word doc in addition to the one you have open. You will use this later. Start the macro recording and find the field using the "^d" (field code) as you said.
When the field is found, copy only the field text within the brackets, and not the full field reference. While the macro is still recording, ALT + TAB to the new blank document and paste the field code in as plain text.
At this point, do the necessary find & replace processing to the field codes. Highlight the processed field codes, copy, ALT + TAB back to the original document, and paste back between the { } brackets.
Stop the macro recording. Add any further custom processing to the macro VBA.
Select-All and re-toggle the field codes. Update the field codes.
You don't need a macro. Just toggle all field codes on by using Alt+F9. Then do a find and replace for what you want to change. Once the replacement is complete, use Alt+F9 again to toggle the field codes back off.
Disclaimer: I didn't originate this solution, but it's clean and elegant and I thought it should be included here:
(Adapted from Search & Replace Field Codes in Word):
Create or find a single instance of the field you want to convert text to
Toggle Field Codes visible (AltF9)
Copy the code for the field you want to use to the Clipboard (highlight and CtrlC)
Open the Replace dialog box (CtrlH), insert the text you want to replace in the Find What box and then enter ^c in the Replace With box.
This will replace your text with the contents of the Clipboard, turning it into the field code you copied in step 3. It also copies formatting information (font, color, etc.), to control how the field will appear when hidden. (Caveat: I've tested this with Word 2003 under Windows 7 only.)
Coming in late on this, probably way too late for Beth (sorry Beth). And this may not be quite what Beth was looking for. But for anyone interested ...
It sounds like Beth may have created captions throughout the document using INSERT CAPTION (hence the presence of field codes). This means these captions will have been (automatically) created in CAPTION style.
To globally replace the separator "." with " " (space) in such captions, take two steps:
[1] Go to REFERENCES | INSERT CAPTION, then click on NUMBERING and replace the SEPARATOR "." with "EM-DASH". This will replace all separators in captions for the selected label in the CAPTION Window. If you have other labels in use in the document (e.g. FIGURE), select the other labels one by one and repeat this process.
[2] Do a find/replace searching for special character "em-dash" (^+) in style CAPTION, replacing with " ". Click REPLACE ALL.
Voila!
NOTE: This presumes that em-dash does not appear in the caption text anywhere. If it does, then you'll need to do a pre- and post- "fiddle" to ensure these em-dashes are not touched by the global replace above.
The "pre-fiddle" is to do a global find/replace across captions, replacing the em-dash ("^+") with some other string (e.g. "EM-DASH") that doesn't ever occur in any caption's text. Then you do the separator change as described above. Finally, the "post-fiddle" is to restore the em-dashes that were in the captions, by doing a global replace of the string "EM-DASH" with the actual em-dash character "^+".