I am trying to run mongodb-community#4.2 service using brew services start mongodb-community#4.2 (facing similar error, while running httpd service or any other service)
Following is the error:
Error: Failure while executing; /bin/launchctl bootstrap gui/502 /Users/chiragsingla/Library/LaunchAgents/homebrew.mxcl.mongodb-community#4.2.plist exited with 5.
There can be multiple reasons behind this error message. So, the first thing to do is to find where your mongo related logs are stored. To do that, run the following command -
sudo find / -name mongod.conf
This will get you the mongo db config file. On running this command, I got /usr/local/etc/mongod.conf. You may find it directly under /etc.
On opening mongod.conf, you will find log path mentioned there. You can open the file itself, or instead get the last 15-20 lines of this log file via tail command -
tail -n 15 <<your mongo db log path>>
Now, you will need to debug the issue mentioned in the logs. Generally, I have seen these three sets of issues -
Permission issue with /tmp/mongodb-27017.sock - While some SO answers asked to change the permissions for this file as a solution, my issue with this only went away after I removed this file.
Compatibility issue - If you see a message like Version incompatibility detected, it means that the mongodb version you have currently installed is different from the version whose data is present on your system. Uninstall the current mongodb version and then install the correct older version (if you don't want to lose the data).
Once you have done it, and your mongo is up and running, and you want to upgrade mongodb version, follow this SO answer.
Permission issues with WiredTiger - Using chmod to change file permissions resolved these.
In case you have any issue other than these three, you will still need to search more on SO and figure it out. Hope this was of some help! :)
So ive been tasked of upgrading our postgres server to version 11, however all the guide ive found either dont work for me or are not complete.
I have tried 2 methods and had to recall all changes:
https://www.hutsky.cz/blog/2019/02/upgrade-postgresql-from-9-3-to-11/
In this method not only are the dependency checks and upgrade commands exactly the same but also none of these commands work for me, i keep getting the error of:
"You must identify the directory where the new cluster binaries reside.
Please use the -B command-line option or the PGBINNEW environment variable.
Failure, exiting"
And ive been unable to find any fix to this.
And also tried the delete old method :
https://techcyclist.com/postgres/upgrading-postgres-to-the-latest-version-on-centos-7-server/
but in this method he deletes the old postgres completely and also the config files, but our config files have been made by the EX sys admin and i simply dont have the time it takes to study the configs to redo them in the new version, and i cant risk simply replacing the new config file with the ole one.
If anyone has done such a assignment and is willing to help, i would much appreciate it.
I used : yum install postgresql11 postgresql11-contrib postgresql11-devel postgresql11-libs postgresql11-server
to install the new postgres 11 and :
/usr/pgsql-11/bin/initdb -D /var/lib/pgsql/11/data
to init it. with a few dependencies installing in between.
afterwards all other commands :
/usr/pgsql-11/bin/pg_upgrade --old-bindir=/usr/pgsql-9.3/bin/ --
new-bindir=/usr/pgsql-11/bin/ --old-
datadir=/var/lib/pgsql/9.3/data/ --new-
datadir=/var/lib/pgsql/11/data/ --check
gave errors as described.
I'm using:
CentOS 6.7
Zend.1.2.15 using oci8, using instantclient 11.2 x64
PHP 5.4.45
Trying to connect to an Oracle:
Oracle Database 10g Release 10.2.0.4.0
Already checked credentials, already tried to connet to other Oracle server but the error still the same:
12546 ORA-12546: TNS:permission denied *
Already gave 0777 permission to /usr/local/oracle/11.2/client64/ following some answer around but none of them solved.
Server does not have the IP in any sort of blacklist.
The same code runs in any other Windows PC with OracleInstantClient and no further configuration was needed on the server about giving an IP permissions to access or any permission at all.
Is there something more that I can check to solve this?
After hours searching I found this article: http://www.emsperformance.net/2013/12/20/connecting-to-oracle-database-from-php-with-oci8/ which is by far the best article explaining the installation process of LAMP, Oracle, Zend.
The setting I was missing is:
setsebool -P httpd_can_network_connect on
Edit: After a while this answer still looks useful to someone, worths to say that this happens because the machine has SELinux activated, usually in the enforcing mode. I would not recommend to disable SELinux, but setting it to permissive looks to ease the process of identifying some problems with it. You can check SELinux status by sestatus.
A full list of booleans on SELinux is available at: https://wiki.centos.org/TipsAndTricks/SelinuxBooleans
Overall information: https://wiki.centos.org/HowTos/SELinux
I have attempted to install PostgreSQL 9.4 and 8.4 multiple times and it is failing no matter what I have tried. I am attempting to install on Windows 7 SP1 x64. After each failed install I have uninstalled and deleted the installation folder to start fresh.
Each time I attempt the install I get an error pop up near the end of installation that says:
"failed to load sql modules into the database cluster".
Then another error pop up displays immediately after that says:
"Error running post install step. Installation may not complete correctly. Error reading C:/Program Files/PostgreSQL/9.4/postgresql.conf"
I have attempted installation with the following actions:
Always installed as administrator
Turned off all virus protection and windows firewall
Changed the installation directory to something other than the Program Files directory.
Changed the data directory to something other than the installation directory of postgres
None of the actions above have helped and I always receive the error. Any help that someone can provide would be greatly appreciated!
Encountered a very similar problem that OP is reporting today while installing Postgres 9.4.
It turns out that the password generator I was using has made a password that contains non-alphanumeric characters. ("^") I believe was the culprit in this case. Removing that allowed the installation of Postgres 9.4 (Windows 64 bit) to complete.
Very easy fix once you've found it, but the error message that comes up is not descriptive, so in this case I didn't notice at first what I was doing wrong.
I was getting this same error when trying to install PostgreSQL v9.4.4 on Windows 10 Pro. Starting with a solution hosted on Stack Exchange, I came up with the following steps that allowed the installer to run successfully:
1) Create a new user account, called postgres
2) Add the new account to the Administrators and Power Users groups
3) Restart the computer
NOTE: I added step #3, since step #4 didn't work without it
4) Run a command prompt as the postgres user, using the command:
runas /user:postgres cmd.exe
5) Run the installer from the postgres command window
6) Delete the postgres user account, as well as the user directory
NOTE: I added step #6, since the postgres account is not required after installation
What worked for me is, during the install, specifying a Postgre SQL data folder that's outside of any Windows user profile directory (C:\Users), such as C:\postgres-data.
My setup:
Win 10 Pro
PostgreSQL 9.5 RC1
I ran into this issue when I tried setting PostgreSQL's data directory somewhere under my user profile's directory, such us somewhere under "My Documents".
I tried Jeff G's solution and it didn't work at first. It worked only when I kept the data directory as the default (C:\Program Files\PostgreSQL\9.5\data). So then I tested further and tried setting the data directory to somewhere outside of any user profile directories (i.e. somewhere that isn't under C:\Users). For example, C:\postgres-data and this worked.
I then just tried using that directory with my default user, and not bothering with the postgres temp user as outlined in Jeff G's solution and that also worked. So in the end, it had to do with my data directory being somewhere under C:\Users. As long as it was outside of that, it worked.
None of these answers here helped me, finally I solved this problem by creating the folder before the installation (C:\PostgreSQL\data) and giving it full access for the group "Users".
Windows 7 x64, postgresql-9.5.2-1-windows-x64
Hope It's Work.
1.)Uninstall PostgreSQL
2.)Delete the postgres user if it still exists :
net user postgres /delete
3.) Create the postgres user with a password you can remember:
net user /add postgres
4.) Add the postgres user to the Administrators group:
net localgroup administrators postgres /add
5.) Add the postgres user to the Power Users group
net localgroup "power users" postgres /add
6.) Run a command window as the postgres user:
runas /user:postgres cmd.exe
7.) Change user postgres and install postgresql
8.)Back your and remove the postgres user from the Administrators group.
net localgroup administrators postgres /delete
I had the same error ("Failed to load SQL modules into the database cluster.") when installing on W2K12R2 using the EnterpriseDB installer linked to from the PostgreSQL Windows download page. I tried running the installer with admin privs, and using the postgres-user solution offered by Jeff G, but neither worked. Finally I tried the second installer, BigSQL, and that installed without issue.
When installing PostgreSQL, do not use the following symbols in your database's admin password: %, <, and >.
Bug report and problem solution here
Changed the data directory to something other than the installation directory of postgres
Make sure NETWORK SERVICE has read/write permissions on that folder, the installation was failing for me until I did this.
I had this issue too with 9.5 and got around it by:
Installing with the default data folder.
Making sure my new data folder had full control access for the "NETWORK SERVICE" account.
Then changing the default PGDATA folder as per this instruction: https://wiki.postgresql.org/wiki/Change_the_default_PGDATA_directory_on_Windows
I had the same problem, and noticed that some Postgres .bat files were opening in a text editor. Text editors opening files during installation isn't too uncommon, but I noticed these batch files were setting directory permissions. I then found that .bat files were set to open in a text editor (Notepad++) by default. I changed the default program for .bat files, uninstalled Postgres, re-ran the installer, and it worked perfectly. Hope this helps.
I had the same problem before. I solved this by installing Visual Studio C++ Express first.
I had the same experience as #gomisha. #Jeff G's solution did not work for me no matter which user ran the installer.
As long as the target data directory was anywhere under c:\users, the install or database cluster init would fail.
I was successful after creating c:\postgresql-data and ensuring that the postgres user had full access in the 'effective access' tool.
Note: I did not use control userpasswords2 to set up the postgres user; I did it through the traditional crappy Windows 10 user wizard that tries to make the user sign up for hotmail. I did run the install as postgres.
I was getting this issue with the BigSQL windows installer PostgreSQL-9.6.5-1-win64-bigsql.exe
The problem turned out to be that my system path was too long. After removing some uncessary junk from my System Path, and then reinstalling, the problem was gone.
One of the answers here is the only thing that worked on my machine:
I had the same error message when trying to install 9.2.4. My issue
was because even though the Win2k8 server had %SYSTEMROOT%\system32 as
part of the path, no programs could "see" anything in
C:\Windows\system32. The installer heavily uses icacls.exe during the
init routine. Since my path was screwed up, the installer bombed out.
Once I explicitly added C:\Windows\system32 to the SYSTEM's Path
environment variable and re-ran the installer as an admin, everything
worked fine.
Credits to the user.
Go to services.msc
Search for postgres service
Go to Log On tab
Select local account
Profit
The alternative solution for problems with PostgreSQL installer is setting this up with a Docker.
Install Docker Desktop
https://www.docker.com/products/docker-desktop/
Start installed Docker Desktop
In PowerShell, run:
docker pull postgres
In PowerShell, run:
docker run -d -p 5432:5432 --name postgres -e POSTGRES_PASSWORD=mypassword postgres
Now you can connect to the Postgres server for example with pgAdmin on the same machine, using:
host: localhost
port: 5432
maintenance database: postgres
username: postgres
password: mypassword
I think this would be better as individual comments above, but I don't have the required rep. I just spent days on this, with Postgres 10 on Win 10 Creators. My "answer" was to let Postgres put the data in its default install folder instead of my User folder (where it would be automatically backed-up).
1. This problem can happen with no reported install errors at all. On my very first try, I saw:
Failed to load SQL modules into the database cluster.
But that seemed to be due to:
Executing C:\Users\loren\AppData\Local\Temp\postgresql_installer_aee8e5a76f\vcredist_x64.exe /passive /norestart
Script exit code: 3010
MSI (s) (AC:FC) [14:21:35:341]: Product: Microsoft Visual C++ 2013 x86 Minimum Runtime - 12.0.40660.
Restart required. The installation or update for the product required a restart for all changes to take effect.
The restart was deferred to a later time.
Restarting Windows after the failure of the rest of the Postgres installation did not let Postgres run.
Once VC was in place, uninstalling and re-installing Postgres (still with its data in my User folder) completed with no reported errors. But every attempt to access it, by any means, still resulted in something like this:
C:\Program Files\PostgreSQL\10\bin>psql
psql: could not connect to server: Connection refused (0x0000274D/10061)
Is the server running on host "localhost" (::1) and accepting
TCP/IP connections on port 5432?
could not connect to server: Connection refused (0x0000274D/10061)
Is the server running on host "localhost" (127.0.0.1) and accepting
TCP/IP connections on port 5432?
The RawCap sniffer showed TCP SYN followed immediately by RST,ACK on localhost for both v4 and v6 for each try. Netstat did not see port 5432 in use at all. All Postgres runtime logs were totally empty. In Windows Services, I could manually start the postgresql-x64-10 service, but it immediately stopped itself, with the note that some services do that normally.
2. I tried moving the data directory via the Postgres wiki procedure. Apparently for Postgres 10 it is incomplete. It does not deal with:
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\PostgreSQL\Installations\postgresql-x64-10\Data Directory
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\PostgreSQL\Services\postgresql-x64-10\Data Directory
C:\Program Files\PostgreSQL\10\pg_env.bat
C:\Program Files\PostgreSQL\10\scripts\serverctl.vbs
But fixing every data file instance I could find did not let it run. And even after fixing all those, and uninstalling and re-installing again with the default location, the new pgAdmin4 somehow still remembered my original User data directory location!
3. I did not try giving NETWORK SERVICE read/write permissions on my User folder. Once the default install worked I wanted to get on with my original project... Maybe that would have worked.
I am trying to install the Sphinx Search Server. I followed the steps given here http://itsonrail.wordpress.com/2010/05/23/installing-sphinx-on%C2%A0windows/
I added C:\Sphinx\bin to environment path and Sphinx Search is listed in the Services panel. When I try to start it, this error occurs:
Windows could not start SphinxSearch service on local computer
Error: 1067 The process terminated unexpectedly.
Please help me solving this problem. Thanks in advance.
I trid this http://sphinxsearch.com/forum/view.html?id=2684 but it didn't help.
I had the same error in my Windows 7 x64. The step below helped to solve my problem:
Create folders data and log in C:\Sphinx.
Then try to start sphinx with cmd:
C:\sphinx\bin>searchd
I have faced the same problem and eventually moved the sphnix.conf to C:\Sphinx\bin\sphnix.conf from root and the services starts. Please try this. (Please make sure there are data\, log\ directories in the root with write permission)
It is looking like your configuration is not setup properly. Have you tried to run search daemon from sphinx directory path via command prompt?
C:\sphinx\bin> searchd
C:\sphinx\bin>indexer --rotate –all
Also please ensure the log via search.log or windows event log.
If it is not running after this than try to reinstall it again
I hope it will work for you
Error 1067 doesn't say much about the problem, except that the process terminated unexpectedly. Try looking some more informations in searchd.log.
I've got same error code when I tried to update Sphinx with newer version.
In the log file, I've found
FATAL: no valid indexes to serve
My problem was that I tried running new version of Sphinx using index files created with an older version. It was solved by deleting all old index files and creating new indexes.
==>> close your cmd window and restart the sphinxsearch service...
I got this error suddenly, when Shpinx was working fine yesterday. Turns out the query log file was hitting 4Gb in size. I deleted it, and service started with no problems.
Make sure all the folders defined in the conf file actually exist. I was missing the LOG folder and that's why I was getting the error. Once I added the folder, the problem was solved.