I am getting a problem at the time of account creation in magneto. it starts loading and not redirect on index page but data saved in database and redirect URL is empty when i checked.
Even not send account confirmation mail if required confirmation enabled.
please help and tell me what setting should be done here because it's working on local but not on live.
You might use the custom extension for that registration.
Or, the AccountController might be rewritten by the other module.
Please check it ( \app\code\core\Mage\Customer\controllers\AccountController.php )
createPostAction()
And also, in your site the magento session might not work properly.
OK, i got the solution as in app\code\core\Mage\Customer\controllers\AccountController.php $url = $this->_welcomeCustomer($customer); was empty so i replaced it with $url = Mage::getBaseUrl()."customer/account/index/"; and it's working.
Related
I'm currently troubleshooting a login issue for a deployed Moodle. Login page uses an alternate page which I have managed to identify. The alternate page considers everything except successful login as invalid or expired login or password.
Since some correct login and password are also getting the same issue.I am trying to restore the Moodle instance to use its default login page but did not find any $CFG->alternateloginurl configuration set in moodle.php. Kindly please provide any pointers you can think of on where to look next to restore the login page.
PS: I've also searched within the active theme, and there has not been any code changes. Uses a variant of Moove
Thank you
Rest assured that its a common issue
https://docs.moodle.org/401/en/Managing_authentication#Alternate_login_URL
There is an entry in the database
SELECT *
FROM mdl_config
WHERE name = 'alternateloginurl'
Note the value, just in case, then blank it out
UPDATE mdl_config
SET value = ''
WHERE name = 'alternateloginurl'
Then purge the cache to update Moodle
php admin/cli/purge_caches.php
When you do manage to log in, check which other authentication methods are active via
Site administration > Plugins > Authentication > Manage authentication
https://docs.moodle.org/401/en/Managing_authentication
The default methods are manual and email self registration
Although self registration is disabled by default in the settings on the same page (registerauth)
Lately I've been using cURL to post data back from a custom Magento controller to a custom page on the same website.
However, the way I do it somehow breaks Magento's log in data. So I've tried another way. Magento has cURL functionality built into it (Varien_Http_Adapter_Curl).
I've tried to Post through this, but so far it has been over my head and documentation on the web is fairly sparse. I need help with this. I've got a string with all the $_POST data ready to go. Please can someone tell me how to send it?
This:
$url="<URL>";
$curl = new Varien_Http_Adapter_Curl;
$curl->setConfig(array('timeout' => 15));
$curl->write(Zend_Http_Client::POST,$url, '1.1', array(), $poststring);
$result = $curl->read();
$curl->close();
...isn't sending data .
Edit:
I've tried the non-Magento cURL, but didn't know about session Data. I still have no Idea how to send session data, either.
Now, I've tried session variables, but the result is that I can set and extract data on one page, but when changing pages the data is lost. So, this can't be used currently between the controller and view.
better you can use the magento sessions
http://magento-rohan.blogspot.in/2012/03/magento-get-set-unset-session.html
here is this how to use it
You need to give us more information about what are you trying to achieve. Basically you need to tell us where are you sending POST request to? Perhaps another Magento instance or even same Magento website? Are you expecting user to have same session it is having now? Once you give us more info I will edit my answer. For now I will try to guess what is bothering you based on the input you gave.
When you are submitting POST request with curl from server side, that means that user is no longer interacting with the "page" you are trying to submit post request to.
If user is not interacting with it, that means it is not sending user session information.
Basically it looks like this:
Normally
Eric ->(Request with session info)-> Server (Oh it's you Eric, here is
the response just for you)
What are you trying to do
Eric ->(Request with session info)-> Server ->(Request without session
info)-> Server (This server doesn't know about Eric)
So to implement this correctly, if I am good at assuming what is your problem, just pass session information to the second server along with your request.
I will add more info if you tell me I am on the good track of understanding your problem.
---UPDATE---
You didn't explain your situation well. I am telling you this because your whole approach with the cURL may be bad decision from the start. For example, if you are trying to execute code in the same Magento codebase and that code is trapped inside some controller, perhaps you can refactor your code and encapsulate that logic inside some model and execute it directly.
But here is the example of passing session information over curl in plain php:
$strCookie = 'PHPSESSID=' . $_COOKIE['PHPSESSID'] . '; path=/';
curl_setopt( $curl, CURLOPT_COOKIE, $strCookie );
Cookie should perhaps be called "frontend" in Magento. And I checked Varien_Http_Adapter_Curl it doesn't have any method for seting CURLOPT_COOKIE option so I suggest you go with plain curl setup. You also have an option to extend adapter and add that option by your self. Just override "_applyConfig" method.
I need some help troubleshooting.
I've just upgraded my 1.3 site to 2.0 (with the intent of going on to 2.1). I get the actual page running, content is read from DB etc, but I cannot log in to the admin panel!
Just to make sure I didn't forget the password I did
<?php echo sha1('password' . 'salt'); ?>
Taking the salt from the DB, and the output is the same as is stored in the DB. But still I cannot log in. The log in prompt just reloads, no error message or anything. Any ideas?
I've also tried clearing cache/sessions/etc, and even a different browser to no affect.
Crossposted from the PyroCMS forum: https://www.pyrocms.com/forums/topics/view/19323
OK, since there doesn't seem to be any good suggestions found either here or on the PyroCMS forums and my site is very small content wise I decided to just wipe everything and do a clean install of the latest build instead.
Not a very good solution for future reference, but it will have to do.
From my checklist (it's been a while since I had this happen to me):
If you didn't get an incorrect password error, it may well be you were just being redirected back to the login page before the details were even checked. You can run into issues with enabling the 'Remove index.php from URL' in .htaccess - in /system/cms/config/config.php try changing
$config['index_page'] = 'index.php';
to $config['index_page'] = '';
or (as you've hinted):
clear the contents of default_ci_sessions table
clear the cookies for the domain (a quicker way is to just open a new Google Incognito window which won't have any cookies).
Also - you can initiate a password reset for the admin password using the ordinary user login form if you or someone else does ever forget it (don't though).
Hi
I have Facebook register in my website. I have integrated it completely without any bugs and the values are stored in the database.After the successful registration , it doesn't redirect to the exact url that i have mentioned below.
header("location:http://www.facebook.com/dialog/oauth/?scope=publish_stream&client_id=yyyyy&redirect_uri=".SITE."business.php?action=favouriteshare&id=".$bid."");
It always through invalid url details.Could anyone please suggest some ideas to get this redirect correctly.
Try the following:
wrap the redirect url with quotes '
use the urlencode() method.
The scope parameter is not yet supported. Please vote this ticket to make it happen.
I have a toy facebook app I'm playing with so I can understand how it all works. It's fine if you go the the app like this: http://apps.facebook.com/pushup-challenge/ (and connect it). But if you then go to it from your facebook page, FB uses the URL http://apps.facebook.com/pushup-challenge/?ref=bookmarks.
In my log file, I see that FB is POSTing the data and including the /?ref=bookmarks to it's call to my codeigniter system. This is causing it to either say "invalid URI parameters" or give me a 404, depending on if I've edited the system/core/URI.php file to add rawurlencode() to a particular call.
I've tried using mod_rewrite to get rid of the query_string, too, but since it's POSTing, it doesn't appear to be working (though I'm not exactly sure why).
Has anyone else run into this? How did you fix it?
Thanks in advance,
Hans
try $config['uri_protocol'] = “PATH_INFO”; and set enable_query_strings = TRUE
or
set
$config['permitted_uri_chars'] = 'a-z 0-9~%.:_\-?=';
in config.php
Because it isn't calling your file by name (just ?ref=bookmarks) the server runs thru the standard default files: index.htm, index.html, index.asp. Because you need to accept a POST, you need a server that allows POSTs to htm & html if you choose to use those. Index.asp will accept POSTs on most servers, and that works for me.
SOLUTION: Add a file (index.asp), that calls the real app that you named in the App settings.