I am reading libpq reference. It has both of sync and async methods. Bu I discovered something strange.
When I see PQsendQuery function, it seems to send a query and return immediately. And I expected a callback function to get notified, but there was no such thing and the manual says to poll for data availability.
I don't understand why async method is written in polling way. Anyway, as libp is the official client implementation, I believe there should be a good reason for this design. What is that? Or am I missing correct callback stuffs mentioned somewhere else?
In the execution model of a mono-threaded program, the execution flow can't be interrupted by data coming back from an asynchronous query, or more generally a network socket. Only signals (SIGTERM and friends) may interrupt the flow, but signals can't be hooked to data coming in.
That's why having a callback to get notified of incoming data is not possible. The piece of code in libpq that would be necessary to emit the callback would never run if your code doesn't call it. And if you have to call it, that defeats the whole point of a callback.
There are libraries like Qt that provide callbacks, but they're architectured from the ground up with a main loop that acts as an event processor. The user code is organized in callbacks and event-based processing of incoming data is possible. But in this case the library takes ownership of the execution flow, meaning its mainloop polls the data sources. That just shifts the responsibility to another piece of code outside of libpq.
This page is describing how I can get be notified for async result fetch.
http://www.postgresql.org/docs/9.3/static/libpq-events.html#LIBPQ-EVENTS-PROC
PGEVT_RESULTCREATE
The result creation event is fired in response to any query execution
function that generates a result, including PQgetResult. This event
will only be fired after the result has been created successfully.
typedef struct {
PGconn *conn;
PGresult *result; } PGEventResultCreate; When a PGEVT_RESULTCREATE event is received, the evtInfo pointer should be cast to a
PGEventResultCreate *. The conn is the connection used to generate the
result. This is the ideal place to initialize any instanceData that
needs to be associated with the result. If the event procedure fails,
the result will be cleared and the failure will be propagated. The
event procedure must not try to PQclear the result object for itself.
When returning a failure code, all cleanup must be performed as no
PGEVT_RESULTDESTROY event will be sent.
Related
I am working on OpenCL implementation wherein the host side particular function has to call every time the clEnqueueReadBuffer is done executing.
I am calling the kernels in a loop. It will look like below in an ordered queue.
clEnqueueNDRangeKernel() -> clEnqueueReadBuffer(&Event) ->
clEnqueueNDRangeKernel() -> clEnqueueReadBuffer(&Event) .......
I have used clSetEventCall() to register Events in each read command to execute a callback function. I have observed that, though the command queue is an in-order queue, the order of the callback function does not execute in-order.
Also, in OpenCL 1.2, it has a mention as below.
The order in which the registered user callback functions are called
is undefined. There is no guarantee that the callback functions
registered for various execution status values for an event will be
called in the exact order that the execution status of a command
changes.
Can anyone give me a solution? I want to execute the callback function in order.
A simple solution could be to subscribe the same callback function to both events. In the callback code, you can check the status of each relevant event and perform the operation you want accordingly.
Note that on some implementations, the driver will batch multiple commands for execution.
The immediate effect is that that multiple events will be signaled "at once" even though the associated commands complete at a different time.
// event1 & event2 are likely to be signaled at once:
clEnqueueNDRangeKernel();
clEnqueueReadBuffer(&event1);
clEnqueueNDRangeKernel();
clEnqueueReadBuffer(&event2);
Wheres:
// event1 is likely to be signaled before event2:
clEnqueueNDRangeKernel();
clEnqueueReadBuffer(&event1);
clflush(queue);
clEnqueueNDRangeKernel();
clEnqueueReadBuffer(&event2);
clflush(queue);
I would also check on which exact thread the callbacks are invoked.
Is it the same thread each time? or a different one? If the implementation opens a new thread for this task, it might be wiser to open a single thread yourself and wait for events in the order that you wish.
Am I right to assume that "map" could essentially be a "subscribe" with a return type . They both seem to get called asynchronously when the promise gets resolved ?
For example , if I dispatch a list of 3 Async calls concurrently, would applying the map operation in manner below be blocking ?
Flux.merge(albums.stream().map(album -> {
Mono<CoverResponse> responseMono = clientRequestHandler.makeAsyncCall()
//2.call and handler for async call
return responseMono
.map(response -> processResponse());
}).collect(Collectors.toList())).then(Mono.just(monoResponse));
In the above snippet, is each map operation going to be blocking? If say, the first call takes 5 ms to to return and every other call takes 2 ms to return , are we going to wait 3ms+2ms+2m = 7ms for the enitre operation ? or just 3ms since once the first call gets resolved , the 2ms calls are already resolved by then.
First of all, nothing will happen until someone subscribes. Subscribe is the last thing in the chain, that will trigger the start of all the events.
Second of all you need to understand the difference of running something in parallell vs running something non-blocking.
to resolve your first map, it needs to make the rest call, then with the response it needs to do your second map. These two wont be run in parallell.
Your responseMono.map can't be run until Mono<Response> responseMono actually has something in it. Think of it as a Promise that will signal the application when it has been resolved.
Or you can think of it as a chain of callbacks.
So in your example you are doing a clientRequestHandler.makeAsyncCall() but you are returning a Mono<CoverResponse> the next part the responseMono.map wont trigger, until there is a CoverResponse in the mono. So your "async" call, is probably async, but still adheres to list order since its all in a sequential stream.
But map is a mapping function. It takes something out of the box, performs a computation on something in the box and then returns the new value or type.
What makes reactive better than other options is that when you do your side effect the remote call somewhere that takes time, the thread that is processing this wont hang around and wait for the external request to finish, it will start doing other things, like processing other requests.
Then when the Mono<Response> signals the system that there is "something in the box" a response, then the same thread or any other available thread will keep on processing the request.
I'm having a difficult time trying to understand how the control flow in protractor work in relation to how JS event loop works. Here is what I know so far:
Protractor control flow stores commands that return promises in a queue. The first command will be at the front of the queue and the last command will be at the back. No command will be executed until the command in front of it has its promise resolved.
JS event loop stores asynchronous task (callbacks to be specific). Callbacks are not executed until all functions in the stack have completed and the stack is empty. Before running each callback, there is a check on whether the stack is empty or not.
so lets take this code for example. The code is basically clicking a search button and a api request is made. Then after data is returned, it checks whether the field that stores the returned data exists.
elem('#searchButton').click(); //will execute a api call to retrieve data
browser.wait(ExpectedConditions.presenceOf(elem('#resultDataField'),3000));
expect(elem('#resultDataField').isPresent()).toBeTruthy();
So with this code, I'm able to get it to work. But I don't know how it does it. How is the event loop applied in this scenario?
The core of the ControlFlow implementation is in runEventLoop_ (in Selenium's promise.js implementation).
As I understand it, the ControlFlow registers a call to runEventLoop_ with the JS event loop (e.g., with a 0-second timeout or somesuch). The call to runEventLoop_ can be thought of as a single iteration of a normal event loop. It registers code to actually run a scheduled task (i.e., actually do the work you queued up during your it). Once that task completes or fails (e.g., by hooking its async promise callbacks) the next iteration of runEventLoop_ is scheduled (see the calls to scheduleEventLoop in runEventLoop_).
There is some complexity when a callback ends up registering new promises (those need to be "inserted" before the old next event, this is accomplished by creating a "nested" control flow. Mostly you should never have to know this.)
By reading some text, especially the iOS document about delegate, all the protocol method are called hook that the custom delegate object need to implement. But some other books, name these hook as callback, what is the difference between them? Are they just different name but the same mechanism? In addition to Obj-C, some other programming languages, such as C, also got the hook, same situation with Obj-C?
The terminology here is a bit fuzzy. In general the two attempt to achieve similar results.
In general, a callback is a function (or delegate) that you register with the API to be called at the appropriate time in the flow of processing (e.g to notify you that the processing is at a certain stage)
A hook traditionally means something a bit more general that serves the purpose of modifying calls to the API (e.g. modify the passed parameters, monitor the called functions). In this meaning it is usually much lower level than what can be achieved by higher-level languages like Java.
In the context of iOS, the word hook means the exact same thing as callback above
Let me chime in with a Javascript answer. In Javascript, callbacks, hooks and events are all used. In this order, they are each higher level concepts than the other.
Unfortunately, they are often used improperly which leads to confusion.
Callbacks
From a control flow perspective, a callback is a function, usually given as an argument, that you execute before returning from your function.
This is usually used in asynchoronous situations when you need to wait for I/O (e.g. HTTP request, a file read, a database query etc.). You don't want to wait with a synchronous while loop, so other functions can be executed in the meantime.
When you get your data, you (permanently) relinquish control and call the callback with the result.
function myFunc(someArg, callback) {
// ...
callback(error, result);
}
Because the callback function may be some code that hasn't been executed yet, and you don't know what's above your function in the call stack, generally instead of throwing errors you pass on the error to the callback as an argument. There are error-first and result-first callback conventions.
Mostly callbacks have been replaced by Promises in the Javascript world and since ES2017+, you can natively use async/await to get rid of callback-rich spaghetti code and make asynchronous control flow look like it was synchronous.
Sometimes, in special cascading control flows you run callbacks in the middle of the function. E.g. in Koa (web server) middleware or Redux middleware you run next() which returns after all the other middlewares in the stack have been run.
Hooks
Hooks are not really a well-defined term, but in Javascript practice, you provide hooks when you want a client (API/library user, child classes etc.) to take optional actions at well-defined points in your control flow.
So a hook may be some function (given as e.g. an argument or a class method) that you call at a certain point e.g. during a database update:
data = beforeUpdate(data);
// ...update
afterUpdate(result);
Usually the point is that:
Hooks can be optional
Hooks usually are waited for i.e. they are there to modify some data
There is at most one function called per hook (contrary to events)
React makes use of hooks in its Hooks API, and they - quoting their definition - "are functions that let you “hook into” React state and lifecycle features", i.e. they let you change React state and also run custom functions each time when certain parts of the state change.
Events
In Javascript, events are emitted at certain points in time, and clients can subscribe to them. The functions that are called when an event happens are called listeners - or for added confusion, callbacks. I prefer to shun the term "callback" for this, and use the term "listener" instead.
This is also a generic OOP pattern.
In front-end there's a DOM interface for events, in node.js you have the EventEmitter interface. A sophisticated asynchronous version is implemented in ReactiveX.
Properties of events:
There may be multiple listeners/callbacks subscribed (to be executed) for the same event.
They usually don't receive a callback, only some event information and are run synchronously
Generally, and unlike hooks, they are not for modifying data inside the event emitter's control flow. The emitter doesn't care 'if there is anybody listening'. It just calls the listeners with the event data and then continues right away.
Examples: events happen when a data stream starts or ends, a user clicks on a button or modifies an input field.
The two term are very similar and are sometimes used interchangably. A hook is an option in a library were the user code can link a function to change the behavior of the library. The library function need not run concurrent with the user code; as in a destructor.
A callback is a specific type of hook where the user code is going to initiate the library call, usually an I/O call or GUI call, which gives contol over to the kernel or GUI subsystem. The controlling process then 'calls back' the user code on an interupt or signal so the user code can supply the handler.
Historically, I've seen hook used for interupt handlers and callback used for GUI event handlers. I also see hook used when the routine is to be static linked and callback used in dynamic code.
Two great answers already, but I wanted to throw in one more piece of evidence the terms "hook" and "callback" are the same, and can be used interchangeably: FreeRTOS favors the term "hook" but recognizes "callback" as an equivalent term, when they say:
The idle task can optionally call an application defined hook (or callback) function - the idle hook.
The tick interrupt can optionally call an application defined hook (or callback) function - the tick hook.
The memory allocation schemes implemented by heap_1.c, heap_2.c, heap_3.c, heap_4.c and heap_5.c can optionally include a malloc() failure hook (or callback) function that can be configured to get called if pvPortMalloc() ever returns NULL.
Source: https://www.freertos.org/a00016.html
In the past, I have used libraries that would allow me to register a callback so that the library can call my method when some event happens (e.g. it is common to see in code that use GUI libraries to look like button.onClick(clickHandler)).
Naively, I suppose the library's handling mechanism could be implemented like:
while(1){
if (event1) { event1Handler(); }
if (event2) { event2Handler(); }
...
}
but that would be really wasteful right? Or is that really how it is done (for instance do well known GUI libraries like java swing, or GTK+ do it this way)?
background:
This question hadn't really occured to me until I encountered curses. I thought about implementing my own callback system, until I realized I didn't know how.
The while loop will typically wait for an interrupt from the user (GetMessage in Windows). When an interrupt arrives GetMessage returns and then it ends up in the callback function. The if statements are typically implemented as a switch-case. See Windows Message Loop on Wikipedia.
In more detail, what happens is the following:
The user application calls GetMessage, which forces the process to sleep until an input message for that application arrives from the systems queue. When a message arrives, the user app calls DispatchMessage, which calls the callback function associated with the window that the message was aimed at.
Windows API uses one callback which handles all events in a switch case. Other libraries use one callback per event class instead.
The function pointers themselves are stored together with other window data in a struct.
Callback system implementation probably has different implementation in different technologies, however, I suppose they should be working this way:
A data structure stores the callback IDs and pointers to the handlers.
A callback handler has a validator
Event handlers have callback callers, which know what are the possible callbacks and check their validity this way:
for each callback in event.callbacks
if (callback.isValid())
call callback()
end if
end for
When you add a handler to a function the system will automatically know where the callback is valid and will add the callback to the datastructure described in 1.
Correct me if I'm wrong, this description is just a guess.