I am starting to use requests lib and beautifulsoup lib. My goal is to extract data from Twitter, and do some hot topic analysis.
After I installed Python 2.7.5 on windows 7 system, I can import urllib2, but I can not import requests or BeautifulSoup.
Here is the error message below. Can someone help me here?
Python 2.7.5 (default, May 15 2013, 22:43:36) [MSC v.1500 32 bit (Intel)] on win32 Type "copyright", "credits" or "license()" for more information.
>>> import requests
Traceback (most recent call last): File "<pyshell#0>", line 1, in <module>
import requests ImportError: No module named requests
I have googled a lot but find little hint on my situation. If you think that more info is needed to solve the problem, please leave a note here, I will be more than glad to provide the info that's needed.
Any help will be appreciated. Thanks!
I had a similar problem.
Mac OSX, IDLE Python 3.6:
Installed the module requests using the following commands:
import pip
pip.main(["install","--user","requests"])
The result was:
Successfully installed requests-2.12.4
But then I could not import the module requests using the command "import requests". But also not the command "import requests-2.12.4" was running in the IDLE. Running on a shell starting with "python3" I could run the standard import command "import requests" successfully.
So I did quit the IDLE and started it new. And then it did run as expected.
Maybe this helps you too!
Related
I encountered a problem with topic is ImportError: No module named serial by I use it in Linux ubuntu 20.04, and my python version is 3.8.10.
Traceback (most recent call last):
File "/home/prawee/catkin_ws/src/ros_myo_2/scripts/myo-rawNode.py", line 9, in <module>
import serial
ImportError: No module named serial
And I have pyserial version 3.5 installed. I have tried repeating the serial install which says this.
Requirement already satisfied: pyserial in /usr/local/lib/python3.8/dist-packages (3.5)
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
WARNING: There was an error checking the latest version of pip.
I wonder if this warning is related to problem?
This problem just happened for the first time. Before this I was able to use it normally. I have tried many ways but still don't understand how to fix it, please help me.
I am stuck in a problem import serial which I hope to be able to fix and use it again the way it used to be.
I am using VQGAN+CLIP_(Zooming)_(z+quantize_method_with_addons).ipynb Google Repository and when I click the cell "Loading of libraries and definitions"
It sent an error :
ImportError Traceback (most recent call last)
<ipython-input-6-fe8fafeed45d> in <module>
24 from omegaconf import OmegaConf
25 from PIL import Image
---> 26 from taming.models import cond_transformer, vqgan
27 import torch
28 from torch import nn, optim
1 frames
/content/taming-transformers/main.py in <module>
10 from pytorch_lightning.trainer import Trainer
11 from pytorch_lightning.callbacks import ModelCheckpoint, Callback, LearningRateMonitor
---> 12 from pytorch_lightning.utilities.distributed import rank_zero_only
13
14 from taming.data.utils import custom_collate
ImportError: cannot import name 'rank_zero_only' from 'pytorch_lightning.utilities.distributed' (/usr/local/lib/python3.7/dist-packages/pytorch_lightning/utilities/distributed.py)
I don't know how to solde this problem. I don't know how to manually install Pytorch as it said "NOTE: If your import is failing due to a missing package, you can
manually install dependencies using either !pip or !apt.
To view examples of installing some common dependencies, click the
"Open Examples" button below."
Thank you in advance if you have the solution.
Inès
I triad !pip install but I may not really know where to put this cell/line of code
pytorch_lightning has recently released a new version which will throw this error (version 1.8.0.post1 released on November 2nd 2022).
https://pypi.org/project/pytorch-lightning/#history
Just install an older version of pytorch_lightning and it will work.
In my system, I ran "pip install pytorch-lightning==1.6.5", higher versions may work as well, you can check them out by clicking on the link provided above and then clicking on release history.
Finally, after long research, I found the solution for it, try to run it, you will face an issue with CLIP module, once you resolve python issue as well, so for that follow the second code.
conda install pytorch-lightning -c conda-forge
Once you clone it, try to follow below command
Step:1 cd CLIP
Step2: python setup.py
after that,
type: cd..
Once you do that, you will be redirected to previous directory named "VQGAN-CLIP"
and finally, run the following command:
python generate.py -p "A painting of an apple in a fruit bowl"
Once it is done, then run your generate python file, It will work fine.
use #vishisht-rao solution to downgrade the package version of pytorch-lightning to 1.7.7; this step by itself did not solve the problem for me.
pip install pytorch-lightning==1.6.5
run pip list|grep lightning to find the installed version of lightning-utilities. Mine was lightning-utilities==0.4.2
Downgrade the package version of lightning-utilities to 0.4.0
pip install lightning-utilities==0.4.0
Downgrading the package versions of both pytorch-lightning and lightning-utilities solved the problem for me.
I encountered an import problem by PyAudio.
I have a winodws 10, 64 bit, and use Anaconda and Spyder IDE with python 3.7.
I installed PyAudio in Ananconda, ran as administrator, with these commands :
cd
conda install -c conda-forge PyAudio
The installation ran without any problems.
I then restarted both Anaconda and SPYDER. PyAudio now shows up in Anaconda's list of installed packages.
When I try to import Pyaudio in Spyder (IPython console), I encounter this error message :
[1]: import pyaudio
Could not import the PyAudio C module '_portaudio'.
Traceback (most recent call last):
File "", line 1, in
import pyaudio
File "C:\ProgramData\Anaconda3\lib\site-packages\pyaudio.py", line 116, in
import _portaudio as pa
ImportError: DLL load failed: The specified module could not be found.
I tried to fix it by answers to similar ImportError message issued, while other users tried to import other packages like SKlearn ... , but with no success.
Your problem (and mine) are the same. The issue is, unfortunately, the version of python you're running (in tandem with your OS).
Check out this link:
https://people.csail.mit.edu/hubert/pyaudio/#:~:text=Note%3A%20As%20of%20this%20update,4.
Under the INSTALLATION section in the link for WINDOWS, PyAudio's latest version (0.2.11) is compatible with Python versions: 2.7, 3.4, 3.5, 3.6.
My current python is 3.8.5, so you (and I) could never use PyAudio unless they added compatibilities or we revert to an above python version.
I tried to install portaudio using
conda install portaudio
but it seems like it didn't work as it should be. However,
conda install -c anaconda portaudio
solved the problem.
see the official anaconda page
I have seen many more or less related questions on this topic, but none helped me finding a way to solve my problem.
I'm not very familiar with Windows environment, deep apologies if my question sounds obvious to some extent.
Setup:
Windows 10
Python 3.7.0 (installed through latest Anaconda release)
Spyder 3.3.1
Im running a Python, that involves several modules import. I came across some module issues. For example:
from PIL import Image as PIL_Image
Works smooth in Spyder, but gives (error message in french but I guess you got the point):
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "C:\Users\my_user_name\Anaconda3\lib\site-packages\PIL\Image.py", line 64, in <module>
from . import _imaging as core
ImportError: DLL load failed: Le module spécifié est introuvable.
If executed in Powershell or cmd.
What I tried:
Appending Anaconda's install path to my path variable before I open Powershell:
$Env:path += ";C:\Users\my_user_name\Anaconda3;C:\Users\my_user_name\Anaconda3\Scripts"
Checking that sys.path is the same in Powershell and Spyder. For both, it looks like:
['',
'C:\\Users\\my_user_name',
'C:\\Users\\my_user_name\\Anaconda3\\python37.zip',
'C:\\Users\\my_user_name\\Anaconda3\\DLLs',
'C:\\Users\\my_user_name\\Anaconda3\\lib',
'C:\\Users\\my_user_name\\Anaconda3',
'C:\\Users\\my_user_name\\AppData\\Roaming\\Python\\Python37\\site-packages',
'C:\\Users\\my_user_name\\Anaconda3\\lib\\site-packages',
'C:\\Users\\my_user_name\\Anaconda3\\lib\\site-packages\\win32',
'C:\\Users\\my_user_name\\Anaconda3\\lib\\site-packages\\win32\\lib',
'C:\\Users\\my_user_name\\Anaconda3\\lib\\site-packages\\Pythonwin',
'C:\\Users\\my_user_name\\Anaconda3\\lib\\site-packages\\IPython\\extensions',
'C:\\Users\\my_user_name\\.ipython']
What else could explain that my import fails outside of Spyder ?
Ok I could not find a clean way out, so let me just share my experience in case someone finds it helpful ...
The DLL failure with PIL related libs seems to be a known issue. See further explanations:
https://github.com/python-pillow/Pillow/issues/2945
PIL: DLL load failed: specified procedure could not be found
How I solved my issue:
Cleanly uninstalled anything related to Python on my laptop. Both Anaconda, isolated Python installs, Spyder ...
Re-installed the latest Anaconda. It happens to come with Python 3.7.1 instead of 3.7.0
Re-did my PIP installs of everything. Note I had to append Anaconda\Library\bin to my Windows path for PIP to work completely, which I don't recall having done with my previous installation.
I am getting the following error:
(virtualenv)[chirdeep#fedora-desktop ~]$ python programs/python/myrestapi.py
Traceback (most recent call last):
File "programs/python/myrestapi.py", line 2, in <module>
import bottle
File "/home/chirdeep/programs/python/bottle.py", line 1, in <module>
from bottle import route, run
ImportError: cannot import name route
I have got python 2.7.3 and 3.2.3. (virtualenv) is pointing to python3 and I have installed bottle in here and its available under site-packges..
I can import bottle when I am under python console after activating the environment.
(virtualenv)[chirdeep#fedora-desktop ~]$ python
Python 3.2.3 (default, Jul 26 2012, 22:03:19)
[GCC 4.7.0 20120507 (Red Hat 4.7.0-5)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import bottle
>>>
Any help will be much appreciated, driving me mad.
Thanks
Your own Python file is called bottle.py:
File "/home/chirdeep/programs/python/bottle.py", line 1, in <module>
So the real bottle.py is shadowed by your own file. Since your own file does not contain route and run, this fails:
from bottle import route, run
Rename your own file, perhaps mybottle.py.
I'm guessing the issue has to do with the collision of your program's namespace with bottle. I.e.: Python is trying to import route from /home/chirdeep/programs/python/bottle.py rather than the bottle.py in site-packages.
Try renaming your program file.