I've been trying to install Powershell for a few hours now. I run this under root:
apt update && apt -y install powershell
This is what I end up getting after it runs through and seemingly downloads
Package powershell is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'powershell' has no installation candidate
When I try to run this same command outside of root using sudo, I get the following:
E: Could not open lock file /var/lib/dpkg/lock-frontend - open (13: Permission denied)
E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), are you root?
I have updated everything and tried a few different ways. I even downloaded a completely new Virtual Machine in Parallels to see if restarting would help out. I still run into the same problems. This is a Kali Linux VM on Parallels MacOS M1. Not sure if that matters or not. I think Parallels itself may possibly be using an apt process in the background, but when I do:
sudo killall apt apt-get
I end up getting
apt: no process found
apt-get: no process found
I've been trying everything. I'm on a new Mac so I don't have too many VM options. If someone could figure this out in Parallels, it would be a great help.
I've tried a lot. In the description above.
To install PowerShell in Kali Linux open the terminal and type:
sudo apt update
sudo apt install -y snapd # install daemon and tooling that enable snap packages
sudo systemctl enable --now snapd apparmor
Log out and back in again, and run the following command to install the powershell snap package.
sudo snap install powershell --classic
!!JUST WRITING THIS POST SO THAT SOMEONE CAN SAVE HOURS IN THIS!!
I tried a hell lot to install this "stunnel" but was unable to do so
I was in my cpanel's terminal
What I tried all with 'sudo'
yum install stunnel
yum -y install stunnel
yum install stunnel5u
yum install stunnel4
etc BUT NONE OF THEM WORKED it just said No package stunnel found
I thought of manually install but still failed
I followed
https://developers.exlibrisgroup.com/blog/newcastle-stunnel-manual-installing-stunnel-on-centos-6/
I tried with the latest version though 5.57
But I stuck on makefile as for this entire stunnel tar package I don't know how to create a makefile
Please Help!!
I searched everywhere but I didn't find it so I tried it myself and it worked
Hope this may help others who are stuck with this in their cpanel RHEL FEDDORA CENTOS
What I did is this:
Open Terminal from Cpanel and run this
wget https://dl.iuscommunity.org/pub/ius/stable/CentOS/7/x86_64/stunnel5u-5.44-1.ius.centos7.x86_64.rpm
rpm -Uvh stunnel5u-5.44-1.ius.centos7.x86_64*rpm
This gave me sign of relief
I am following the steps from this website to customize my Ubuntu image. After unpacking the clean .iso I add some files to the "remaster" and also I would like to install some apps (wireshark for example), so when the systems boots with the custom image, there is no need to install anything. I run the following script:
sudo uck-remaster-clean
sudo uck-remaster-unpack-iso my.iso
sudo uck-remaster-unpack-rootfs
// .. add desired files to the remaster
sudo apt-get install wireshark
sudo uck-remaster-pack-rootfs -c
sudo uck-remaster-pack-iso -g myNew.iso
However, wireshark is installed on the machine on which I am running the script, not in the remaster-root system. What do I need to modify to have the apps installed on the unpacked ISO? Is it even possible?
You skipped a step, you need to sudo uck-remaster-chroot-rootfs before.
Now you can install packages with apt-get and perform all kinds of customizations.
Using the CakePHP docs, I am trying to install 3.0-beta2 using composer but I got this error:
cakephp/cakephp 3.0.x-dev requires ext-intl * -> the requested PHP extension intl is missing from your system
However, I know for sure that intl is installed (it shows on phpinfo). I'm using PHP 5.4.33/Apache 2.4.10.1
I faced the same problem today. You need to enable the intl PHP extension in your PHP configuration (.ini).
Solution Xampp (Windows)
Open /xampp/php/php.ini
Change ;extension=php_intl.dll to extension=php_intl.dll (remove the semicolon)
Copy all the /xampp/php/ic*.dll files to /xampp/apache/bin
Restart apache in the Xampp control panel
Solution Linux (thanks to Annamalai Somasundaram)
Install the php5-intl extension sudo apt-get install php5-intl
1.1. Alternatively use sudo yum install php5-intl if you are on CentOS or Fedora.
Restart apache sudo service apache2 restart
Solution Mac/OSX (homebrew) (thanks to deizel)
Install the php5-intl extension brew install php56-intl
If you get No available formula for php56-intl follow these instructions.
Restart apache sudo apachectl restart
Eventually you can run composer install to check if it's working. It will give an error if it's not.
I faced the same issue in ubuntu 12.04
Installed: sudo apt-get install php5-intl
Restarted the Apache: sudo service apache2 restart
OS X Homebrew (May 2015):
The intl extension has been removed from the main php5x formulas, so you no longer compile with the --enable-intl flag.
If you can't find the new package:
$ brew install php56-intl
Error: No available formula for php56-intl
Follow these instructions: https://github.com/Homebrew/homebrew-php/issues/1701
$ brew install php56-intl
==> Installing php56-intl from homebrew/homebrew-php
When using MAMP
1 Go to terminal
vim ~/.bash_profile
i
export PATH=/Applications/MAMP/bin/php/php5.6.2/bin:$PATH
Change php5.6.2 to the php version you use with MAMP
Hit ESC,
Type :wq,
hit Enter
source ~/.bash_profile
which php
2 Install Mac Ports
https://www.macports.org/install.php
sudo port install php5-intl OR sudo port install php53-intl
cp /opt/local/lib/php/extensions/no-debug-non-zts-20090626/intl.so /Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/
{take a good look at the folder names that u use the right ones}
3 Add extension
Now, add the extension to your php.ini file:
extension=intl.so
Usefull Link:
https://gist.github.com/irazasyed/5987693
The error message clearly states what the problem is. You need the intl extension installed.
Step 1: install PHP intl you comfortable version
$sudo apt-get install php-intl
step 2:
For XAMPP Server intl extension is already installed, you need to enable this extension to uncomment below the line in your php.ini file. Php.ini file is located at c:\xampp\php\php.ini or where you have installed XAMPP.
Before uncomment:
;extension=php_intl.dll ;extension=php_mbstring.dll
After uncommenting:
extension=php_intl.dll extension=php_mbstring.dll
Short answer: activate intl extension in php_cli.ini. Thanks to #ndm for his input.
If you are using latest version Ubuntu 16.04 or later just do
sudo apt-get install php-intl
Then restart your apache
sudo service apache2 restart
In my case I was not actually trying to run cakephp locally, I was just trying to get it to auto update locally using composer (because I am playing with writing plugins that you install with composer). Since I don't actually even run it locally I could simply ignore requirements by adding the --ignore-platform-reqs flag.
php composer.phar update --ignore-platform-reqs
In my case, my running php version is 7.1.x on mac OSX .
I installed intl command using brew install php71-intl.
Placing extension=intl.so inside php.ini was no effect at all. Finally i looked for extension installed directory and there i saw intl.so and placed that path (extension=/usr/local/Cellar/php71-intl/7.1.11_20/intl.so) to my php.ini file and it solved my problem.
In my case (xampp PHP 8.0)
Find ;extension=intl in /xampp/php/php.ini
Remove ; and Restart Apache
MAKE this
In XAMPP, intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
In WAMP, the intl extension is “activated” by default but not working. To make it work you have to go to php folder (by default) C:\wamp\bin\php\php{version}, copy all the files that looks like icu*.dll and paste them into the apache bin directory C:\wamp\bin\apache\apache{version}\bin. Then restart all services and it should be OK.
if you use XAMPP do this
1. turn off XAMPP
2. Modifed the php.ini is located in c/:xampp/php/php.ini
3. intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
For Ubuntu terminal:
Please follow the steps:
Step-1:
cd ~
Step -2: Run the following commands
sudo apt-get install php5-intl
Step -3: You then need to restart Apache
sudo service apache2 restart
For Windows(XAMPP) :
Find the Php.ini file:
/xampp/php/php.ini
Update the php.ini file with remove (;) semi colon like mentioned below:
;extension=php_intl.dll to extension=php_intl.dll
and save the php.ini file.
After that you need to
Restart the xampp using xampp control.
Intl Means :Internationalization extension which enables programmers to perform UCA-conformant collation and number,currency,date,time formatting in PHP scripts.
To enable PHP Intl with PECL can be used.
pecl install intl
On a plain RHEL/CentOS/Fedora, PHP Intl can be install using yum
yum install php-intl
On Ubuntu, PHP Intl can be install using apt-get
apt-get install php5-intl
Restart Apache service for the changes to take effect.
That's it
For those who get Package not found error try sudo apt-get install php7-intl then run composer install in your project directory.
I had the same problem in windows
The error was that I had installed several versions of PHP and the Environment Variables were routing to wrong Path of php see image example
I'm using Mac OS High Sierra and none of these worked for me. But after searching a lot I found one that worked!
This may seem trivial, but in fact about 2 months ago some clever guys made changes in brew repository, so doing just: brew install php71-intl will show you error with message that such recipe doesn’t exists.
Fortunately, there is. There is temporary fix in another brew repo, so all you have to do is:
brew tap kyslik/homebrew-php
brew install kyslik/php/php71-intl
SOURCE: http://blastar.biz/2018/04/14/how-to-enable-php-intl-extension-for-php-7-1-using-xampp-on-macos-high-sierra/
I use Linux Ubuntu 20, you can try this:
Check php installed modules:
php -m | grep intl
If there are no result(s) from this command, you should just go ahead and install the module:
sudo apt-get install php7.4-intl
you will need to change *php7.4 to your desired php version.
you should restart apache when you're done:
sudo service apache2 restart
this is a real problem to me:
Using emacs23 you connect to ftp with command:
/ftp:user#domain.ltd#ftp.domain.ltd/
So it ask you the password and you enjoy programming online...
well...this in emacs 23 ... but now i have to work with emacs24 using its new features and that command don't work anymore...
i'm desperate! help me...this happened in all pc's and brand new system (ubuntu, trisquel, windows, mac..) i'm using so i think its a problem of emacs24 but i don't know how to solve it...
thanks in advance
I've solved in this mode.
download emacs-24.1xxxxxx.tar.gz from here
http://alpha.gnu.org/gnu/emacs/pretest/
sudo apt-get install xorg-dev libjpeg-dev libpng-dev libgif-dev libtiff-dev libncurses-dev
tar xvf emacs-24.1xxxxxxx.tar.gz
cd /emacs-24.1xxxxxxx
./configure
make
----------- I'VE TESTING THE FUNCTIONALITY OF FTP in /SRC/emacs >>>FTP WORKS!!!!
----THEN-----
sudo make install
emacs