I have table with multiple sections and at particular section I have a button in footer of that section. In that action it should write the code to add the new section below to it . but its not adding any new section below to it.
[self.tableView beginUpdates];
[self.tableView insertSections:[NSIndexSet indexSetWithIndex:0]
withRowAnimation:UITableViewRowAnimationBottom];
[self.tableView endUpdates];
On the click of that button, you will have to realod your table and then in the method numberOfSectionsInTableView: you will have to return the numberOfExistingSections + 1
Let me explain in detail.
First you store your initial number of sections in a variable in your class like:
numberOfExistingSections = 5;
Then when you click on a button, the method will look like this:
- (void) buttonClick {
// your code
numberOfExistingSections += 1;
[yourTable reloadData];
}
And your numberOfSectionsInTableView: will look like this:
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView {
return numberOfExistingSections;
}
According to the number of sections and rows you are adding, also dont forget to add modify data inside the arrays or dictionaries you are using to fill data in your UITableView.
Kanan Vora is incorrect. Your problem is that you need to update your model to add the new section before you update the table view.
[self.tableView beginUpdates];
<- insert new section at index 'n' ->
[self.tableView insertSections:[NSIndexSet indexSetWithIndex:n]
withRowAnimation:UITableViewRowAnimationBottom];
[self.tableView endUpdates];
I'm writing an iPhone app with a UITableView as the primary user interface. Each section consists of two rows, a header and the body. When the user clicks on the header, I remove the second row by changing the numberOfRowsInSection value:
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
cbwComponent *comp = [_componentController objectInListAtIndex:section];
if([comp hasContentsView] && !comp.contentsHidden){
return 2;
}else
return 1;
}
When the user selects the header, I'm using the following code:
comp.contentsHidden = YES;
[self.tableView beginUpdates];
NSArray *deleteIndexPaths = [[NSArray alloc] initWithObjects:[NSIndexPath indexPathForRow:1 inSection:indexPath.section], nil];
[self.tableView deleteRowsAtIndexPaths:deleteIndexPaths withRowAnimation:UITableViewRowAnimationFade];
[self.tableView endUpdates];
It's working great, with a nice smooth fade effect. The problem is, I'm trying to add an indicator in the header cell (row 0) that changes when it's clicked on. To change that image I have to refresh the top row as well as the second row, which makes the transition look bad (well, not nearly as smooth). Is there a way to change the image in a UITableViewCell without refreshing the cell?
Thanks
EDIT: I figured it out! You can maintain the smooth transition as long as you reload that first row before you make the change to the second row. It has to be called inside of [tableView beginUpdates];
[self.tableView beginUpdates];
[self.tableView reloadRowsAtIndexPaths:[[NSArray alloc] initWithObjects:[NSIndexPath indexPathForRow:0 inSection:indexPath.section], nil] withRowAnimation:UITableViewRowAnimationNone];
...
[self.tableView endUpdates];
Did the trick.
You could also subclass a tableview cell and implement a view transition in it that can be called from your view controller. You could then call that without having to reload the cell.
[(YourCustomCell*)[tableView cellForRowAtIndexPath:indexPathOfYourCell] fadeInIndicator];
I am interested on how tweetbot does the following:
I would like to create the same thing with my app, where if you click on a row, it pops
an additional UIToolBar and pressing on any other row will dismiss this view with animations.
The logic I think is simple, you just need to add a subView to the UITableViewCell when pressed and shift the rest of the content up, but how do you actually dismiss it when I press the other row?
The best way to do this is to add a dummy cell below the cell that was tapped.
First you need to keep track of what cell is been tapped and act accordingly.
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
//if user tapped the same row twice let's start getting rid of the control cell
if([indexPath isEqual:self.tappedIndexPath]){
[tableView deselectRowAtIndexPath:indexPath animated:NO];
}
//update the indexpath if needed... I explain this below
indexPath = [self modelIndexPathforIndexPath:indexPath];
//pointer to delete the control cell
NSIndexPath *indexPathToDelete = self.controlRowIndexPath;
//if in fact I tapped the same row twice lets clear our tapping trackers
if([indexPath isEqual:self.tappedIndexPath]){
self.tappedIndexPath = nil;
self.controlRowIndexPath = nil;
}
//otherwise let's update them appropriately
else{
self.tappedIndexPath = indexPath; //the row the user just tapped.
//Now I set the location of where I need to add the dummy cell
self.controlRowIndexPath = [NSIndexPath indexPathForRow:indexPath.row + 1 inSection:indexPath.section];
}
//all logic is done, lets start updating the table
[tableView beginUpdates];
//lets delete the control cell, either the user tapped the same row twice or tapped another row
if(indexPathToDelete){
[self.tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPathToDelete]
withRowAnimation:UITableViewRowAnimationNone];
}
//lets add the new control cell in the right place
if(self.controlRowIndexPath){
[self.tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:self.controlRowIndexPath]
withRowAnimation:UITableViewRowAnimationNone];
}
//and we are done...
[tableView endUpdates];
}
Whenever you have that dummy cell present you have to make sure to send the correct count.
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
{
if(self.controlRowIndexPath){
return modelArray.count + 1;
}
return self.modelArray.count;
}
Also, return the appropriate height for your ControlCell.
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath
{
if([indexPath isEqual:self.controlRowIndexPath]){
return 45; //height for control cell
}
return 70; //height for every other cell
}
Lastly, remember the control cell is a dummy. Is not part of the model, thus you have to account for that. If the user taps a row that is above the last tapped row is ok but when the new tapped row is below that control cell you have to make sure you access the right row in your model. In other words, account for that fake cell in the middle of your view.
- (NSIndexPath *)modelIndexPathforIndexPath:(NSIndexPath *)indexPath
{
int whereIsTheControlRow = self.controlRowIndexPath.row;
if(self.controlRowIndexPath != nil && indexPath.row > whereIsTheControlRow)
return [NSIndexPath indexPathForRow:indexPath.row - 1 inSection:0];
return indexPath;
}
I hope this helps.
In tableView:didSelectRowAtIndexPath:, you remove the tool view from the last selected cell. If there is no such view, you create a new one. Then you add this view to the newly selected cell. Save the indexPath of the selected row.
In tableView:heightForRowAtIndexPath:, you check if the indexPath is the same as the saved indexPath. If they are equal, you return a height that is the height of both views. If it is not equal, just return the height of the "real cell".
Put all your calls in didSelectRowAtIndexPath between [tableView beginUpdates] and [tableView endUpdates] to get animation for the height change.
rjgonzo's code works fine except for the case where you only have 1 row in the tableview. When there's only 1 row (and 1 object in the tableview datamodel) you'll get an NSRange exception when you call insertRowsatIndexPath(s). To fix this I checked to see if the datamodel has only 1 object and if so then I add the row to the current indexpath (instead of the controlindexpath) which results in the row logically being added above the first row and then I call moveRowAtIndexPath to interchange the rows after calling [self.tableView endUpdates]. The animation shows as expected with the control row appearing to slide down from the 1st row.
if(self.controlRowIndexPath){
//Check to see if the datamodel only has 1 object
if([self.objects count]==1){
//If so then insert the row above the row
[self.tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:indexPath]
withRowAnimation:UITableViewRowAnimationNone];
}
else
[self.tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:self.controlRowIndexPath]
withRowAnimation:UITableViewRowAnimationNone];
}
[self.tableView endUpdates];
//if the row was inserted above the 1st row then switch the rows
if([self.objects count]==1)
[self.tableView moveRowAtIndexPath:self.controlRowIndexPath toIndexPath:indexPath];
I would not add a subview to a UITableViewCell, I would add another row to the UITableView. That way, the UITableView will take care of the animation. (And I don't think that's possible to animated UITableViewCell height changes...)
Use simply
- (void)insertRowsAtIndexPaths:(NSArray *)indexPaths withRowAnimation:(UITableViewRowAnimation)animation
do add a row. And
- (void)deleteRowsAtIndexPaths:(NSArray *)indexPaths withRowAnimation:(UITableViewRowAnimation)animation
to remove it.
#rjgonzo this works great but there is a minor issue on how you keep the indexPathToDelete. Since it's just another pointer to self.controlRowIndexPath, once you clear or reassign the self.controlRowIndexPath, indexPathToDelete will not be what you wanted, and tableView deleteRowsAtIndexPaths:withRowAnimation: call, you will get an SIGBART crash.
so, instead of
//pointer to delete the control cell
NSIndexPath *indexPathToDelete = self.controlRowIndexPath;
and
//lets delete the control cell, either the user tapped the same row twice or tapped another row
if(indexPathToDelete){
[self.tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPathToDelete]
withRowAnimation:UITableViewRowAnimationNone];
}
the following code should work fine:
//pointer to delete the control cell
NSIndexPath *indexPathToDelete = [NSIndexPath indexPathForRow:self.control_row_index_path.row inSection:self.control_row_index_path.section];
...
...
//lets delete the control cell, either the user tapped the same row twice or tapped another row
if(indexPathToDelete.row != 0){
NSLog(#"row to delete %d", indexPathToDelete.row);
[tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPathToDelete] withRowAnimation:UITableViewRowAnimationNone];
}
Here's what I'm doing to get the animation to be clean.
In addition to the strategy user fluchtpunkt suggests (that is, adding a subview to the cell, updating the cell height via heightForRowAtIndexPath, beginUpdates, and endUpdates), I'm finding the following measures to be helpful with the animation:
The tableviewcells have a background image. Otherwise, the added subview/toolbar is visible through the cell just before the tableview animates the height change.
The tableviewcell is 'behind' the view that is the cell below it, otherwise again the subview/toolbar will show too soon. I'm using [tableview sendSubviewToBack:cell]; and it's taking care of that.
This is clean for me, but not exactly like Tweetbot. Interestingly, Tweetbot's animation seems to pull the toolbar down as the bottom of the cell animates down. It seems like some additional animation must be taking place, or my conspiracy theory is that it is actually adding the subview to the top of the cell below the selected cell, and then performing the lengthening and animation on the cell below.
I am new in objective-c i want ur help
my question is that i have tableview with 10 cell each cell is field with some data that are come from tabase later i change some of the cell value from table view and now i want to read this all cell value from table view after table view reload with new value then how can i do
how can i stored it in new array
i am trying to do something like this it is correct or not if not then how can i do
-(void)viewWillAppear:(BOOL)animated // after new value will insert
{
[tableView reloadData];
NSArray *visibleRowsArr = [tableView indexPathsForVisibleRows];
UITableViewCell *cell = [tableView cellForRowAtIndexPath:[visibleRowsArr objectAtIndex:0]];
}
in viewwillappear
[tableview reloadData] should be at the end of viewwillappear that is before }
It's so easy, you can try use the same array from which you are reloading the whole table.
Because after all that array would have been updated so there is no need to read the records from TableViewCells but try it using with Array.
like :
int AtOurWish =5;
-(void)viewWillAppear:(BOOL)animated // after new value will insert
{
[super viewWillAppear:animated];
[self.YourArray objectAtIndex:AtOurWish];//Index At which you want to access the array
[tableView reloadData];
NSArray *visibleRowsArr = [tableView indexPathsForVisibleRows];
UITableViewCell *cell = [tableView cellForRowAtIndexPath:[visibleRowsArr objectAtIndex:0]];
}
Otherwise you edit you question since it's not much clear!!!
Which method should I use in order to display a cell again in a UITableViewController?
If your data has been updated you can refresh the view by sending the reloadData message to your tableView:
[myTableView reloadData];
Apple's UITableView reference
If you want to reload specific cells, use UITableView's reloadRowsAtIndexPaths:withRowAnimation: method. For example, if you want to reload the cell at row 20 in section 0 and the cell at row 4 in section 2 without an animation:
[cell reloadRowsAtIndexPaths:[NSArray arrayWithObjects:
[NSIndexPath indexPathForRow:20 inSection:0],
[NSIndexPath indexPathForRow:4 inSection:2],
nil]
withRowAnimation:UITableViewRowAnimationNone];
If you want to reload all the cells in the table view, then use UITableView's reloadData method (but be aware of the performance implications):
[tableView reloadData];
Alternatively, if you just want to redraw a cell (rather than reloading it in order to update its information), you can use UIView's setNeedsDisplay method:
[[cell view] setNeedsDisplay];