As many have pointed out this should work, xcode-select --install
I however consistently get
I have XCODE Version 5.0.1 (5A2053) installed.
What am i missing please and how can I get command line tools installed?
Related
I just upgraded from Yosemite to El Capitan (and replicated the problem upgrading from El Capitan to Sierra), and when I try to type for example git status inside a terminal, I get the following error:
xcrun: error: invalid active developer path
(/Library/Developer/CommandLineTools), missing xcrun at:
/Library/Developer/CommandLineTools/usr/bin/xcrun
I don't have Xcode installed, never did.
Anyone have a solution?
Found the fix for the problem here.
xcode-select --install
This will bring up a prompt to install the necessary command line tools.
If you have issues with the xcode-select --install command; e.g. I kept getting a network problem timeout, then try downloading the dmg at developer.apple.com/downloads (Command line tools OS X 10.11) for Xcode 7.1
In macOS 10.14 this issue may also occur if you have two or more versions installed. If you like xCode GUI you can do it by going into preferences - CMD + ,, selecting Locations tab and choosing version of Command Line Tools. Please refer to the attached print screen.
I tried the solution xcode-select --install but it don't help me, I update from Sierra to High and happened this, my solution:
sudo xcode-select --reset
Reassigning the path Xcode is configured with worked for me.
sudo xcode-select -switch /Applications/Xcode.app
You'll then likely be prompted (after trying a command) to agree to the license agreement.
I had the same issue after upgrading to macOS Catalina.
This didn't work for me:
xcode-select --install
Downloading and installing Command Line Tools for Xcode 12 did it!
For me, after I've removed Xcode, I have to switch active developer path as follows:
sudo xcode-select -s /
I just updated to High Sierra and I couldn't just run xcode-select --install. First, I had to actually install xcode from the app store. Then I ran xcode-select --install. Then I had to run sudo xcodebuild -license, agree to the terms, then I could finally run git commands again.
Updated to High Sierra 10.13.2
xcode-select --install ALONE did not work for me.
Download X-code from app store
$xcode-select --install
a. May need to update after install using softwareupdate in command line. $sudo softwareupdate -i "Command Line Tools (macOS High Sierra version 10.13) for Xcode-9.1"
$sudo xcodebuild -license
For Mojave
Uninstall Any old version of Command Line Tools:
sudo rm -rf /Library/Developer/CommandLineTools
Download and Install Command Line Tools 10.14 Mojave.
For those also having issues with heroku command line tools after upgrading, I also had to do the following in my terminal:
xcode-select --install
brew install heroku/brew/heroku
brew link --overwrite heroku
It seems the upgrade to High Sierra messed with my symlinks in addition to forcing me to reinstall xcode tools. I kept getting 'not a directory' errors:
▸ stat /Users/mattymc/.local/share/heroku/client/bin/heroku: not a directory
▸ fork/exec /Users/mattmcinnis/.local/share/heroku/client/bin/heroku: not a directory
Hope that saves someone an hour :)
After update to macOS 10.13.3
After updating do macOS 10.13, I had to install
"Command Line Tools (macOS 10.13) for Xcode 9.3"
downloaded from https://developer.apple.com/download/more/
I upgraded mac os to macOS High Sierra - 10.13.3 and faced a similar issue while trying to install watchman (with command - brew install watchman).
ran the command: xcode-select --install, then ran "brew install watchman" - Everything works fine!
For the most recent version Mojave version 10.14.1, I use
solved by downloaded from https://developer.apple.com/download/more/ " login by apple id, and download
Command line tool newest stable version.dmg
That makes everything work
the old answer
xcode-select --install
doesn't work for me.
sudo xcode-select -s /Applications/Xcode-beta.app/Contents/Developer
Work for me.
Even if you do xcode-select --install it was not fixing that for me as it showed some network error. The problem was that it could not connect to the app store. I did the following to fix it.
Open keystore
Go to system root and select certificates.
Open digicert high assurance EV.
Expand the trust section, mark it as never trust.
Restart system now repeat step 1, 2, 3. and mark the trust policy as
back to use system defaults.
Your app store should work now and you should be able to run xcode-select --install
Currently running Yosemite and unable to update to ruby 2.1.4 , see below.
Guidos-MacBook-Pro:~ Guido$ rvm install 2.1.4
Searching for binary rubies, this might take some time.
No binary rubies available for: osx/10.10/x86_64/ruby-2.1.4.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Checking requirements for osx_brew.
/usr/local/bin/brew: /usr/local/Library/brew.rb: /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby: bad interpreter: No such file or directory
/usr/local/bin/brew: line 26: /usr/local/Library/brew.rb: Undefined error: 0
ERROR: '/bin' is not writable - it is required for Homebrew, try 'brew doctor' to fix it!
Requirements installation failed with status: 1.
So after I stepped away from the computer for a few hours and came back again, I figured out the issue was that Homebrew was broken after I updated OS to Yosemite. Here is the link http://ryantvenge.com/2014/09/ruby-homebrea-yosemite/ to the solution. If that is not working see commands below.
To fix Homebrew:
cd /System/Library/Frameworks/Ruby.framework/Versions
sudo ln -s Current 1.8
brew update
sudo rm 1.8
To update to ruby 2.1.4:
rvm install 2.1.4
rvm use 2.1.4
I'm working on Michael Hartl's ruby on rails tutorial http://ruby.railstutorial.org/ruby-on-rails-tutorial-book#sec-development_tools.
I installed Git, updated my OS to 10.8.2 and downloaded XCode 4.5.2.
when I type in
rvm install 1.9.3
this long thing comes up...
Ruby (and needed base gems) for your selection will be installed shortly.
Before it happens, please read and execute the instructions below.
Please use a separate terminal to execute any additional commands.
Notes for Mac OS X 10.8.2, Xcode 4.5.2.
For JRuby: Install the JDK. See http://developer.apple.com/java/download/ # Current Java version "1.6.0_26"
For IronRuby: Install Mono >= 2.6
For Ruby 1.9.3: Install libksba # If using Homebrew, 'brew install libksba'
For Opal: Install Nodejs with NPM. See http://nodejs.org/download/
To use an RVM installed Ruby as default, instead of the system ruby:
rvm install 1.8.7 # installs patch 357: closest supported version
rvm system ; rvm gemset export system.gems ; rvm 1.8.7 ; rvm gemset import system.gems # migrate your gems
rvm alias create default 1.8.7
And reopen your terminal windows.
Xcode and gcc:
Right now Ruby requires gcc to compile, but Xcode 4.2 and later no longer ship with gcc. Instead they ship with llvm-gcc (to which gcc is a symlink) and clang, neither of which are supported for building Ruby. Xcode 4.1 was the last version to ship gcc, which was /usr/bin/gcc-4.2.
Xcode 4.1 and earlier:
- Ruby will build fine.
Xcode 4.2 and later (including Command Line Tools for Xcode):
- If you have gcc-4.2 (and friends) from an earlier Xcode version, Ruby will build fine.
- If you don't have gcc-4.2, you have two options to get it:
* Install apple-gcc42 from Homebrew
* Install osx-gcc-installer
Homebrew:
If you are using Homebrew, you can install the apple-gcc42 and required libraries from homebrew/dupes:
brew update
brew tap homebrew/dupes
brew install autoconf automake apple-gcc42
rvm pkg install openssl
Xcode 4.2+ install or/and Command Line Tools for Xcode is required to provide make and other tools.
osx-gcc-installer:
If you don't use Homebrew, you can download and install osx-gcc-installer: https://github.com/kennethreitz/osx-gcc-installer.
Warning: Installing osx-gcc-installer on top of a recent Xcode is known to cause problems, so you must uninstall Xcode before installing osx-gcc-installer. Afterwards you may install Xcode 4.2+ or Command Line Tools for Xcode if you desire.
** NOTE: Currently, Node.js is having issues building with osx-gcc-installer. The only fix is to install Xcode over osx-gcc-installer.
Press 'q' to continue.
~
(END)
Originally I had to get homebrew and
brew install libksba
but I did that already and it works. That leads to "Xcode and gcc:" and everything below it.
So, I have homebrew, and the following three commands work:
brew update
brew tap homebrew/dupes
brew install autoconf automake apple-gcc42
But when I try
rvm pkg install openssl
this is what happens
Fetching openssl-1.0.1c.tar.gz to /Users/adamzerner/.rvm/archives
Extracting openssl to /Users/adamzerner/.rvm/src/openssl-1.0.1c
Configuring openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Compiling openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Error running 'make', please read /Users/adamzerner/.rvm/log/openssl/make.log
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Updating openssl certificates
Error running 'update_openssl_certs', please read /Users/adamzerner/.rvm/log/openssl.certs.log
And this is what happens when I try what it says...
Adam-Zerners-MacBook-Pro:~ adamzerner$ rvm reinstall all --force
Adam-Zerners-MacBook-Pro:~ adamzerner$
some other information...
I don't see a .rvm folder under adamzerner, so I can't read what it tells me to (not that I would understand what I'd be reading anyway).
It seems that I have 1.8.7 installed:
Adam-Zerners-MacBook-Pro:~ adamzerner$ ruby -v
ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin12.0]
So... to summarize... when I try to run
rvm install 1.9.3
I get the gcc/Xcode problem. To fix that it says to download apple-gcc42 from Homebrew. When I do that, I get a problem after doing
rvm pkg install openssl
The problem being that I need to reinstall all rubies. When I do that:
rvm reinstall all --force
it seems that nothing happens.
Thanks in advance to anyone willing to help me with this problem!
EDIT: I forgot to say this before. For the "long thing" up above, when I press q to continue, this is what happens...
Searching for binary rubies, this might take some time.
https://rvm.io/binaries/osx/10.8/x86_64/ruby-1.9.3-p327.tar.bz2 - #configure
ruby-1.9.3-p327 - #download
ruby-1.9.3-p327 - #extract
ruby-1.9.3-p327 - #validate
Libraries missing for ruby-1.9.3-p327: env. Refer to your system manual for installing libraries
Mounting remote ruby failed, trying to compile.
Fetching yaml-0.1.4.tar.gz to /Users/adamzerner/.rvm/archives
Extracting yaml to /Users/adamzerner/.rvm/src/yaml-0.1.4
Configuring yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running './configure --prefix=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/configure.log
Compiling yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running 'make', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/make.log
Installing Ruby from source to: /Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327, this may take a while depending on your cpu(s)...
ruby-1.9.3-p327 - #downloading ruby-1.9.3-p327, this may take a while depending on your connection...
ruby-1.9.3-p327 - #extracted to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327 (already extracted)
ruby-1.9.3-p327 - #configuring
Error running './configure --enable-shared --disable-install-doc --prefix=/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 --with-opt-dir=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/configure.log
There has been an error while running configure. Halting the installation.
EDIT: What happens when I follow the github link OliverAtkinson posted
Last login: Wed Dec 26 15:55:12 on ttys000
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew update
Updated Homebrew from 751a0d6e to c67c126c.
==> New Formulae
ume
==> Updated Formulae
akka global markdown ruby slrn
basex gnuplot mu ruby-build ttytter
casperjs gradle qt shiboken vice
cassandra groonga qt5 shocco wine
discount jenkins rakudo-star signing-party xvid
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew tap homebrew/dupes
Error: Already tapped!
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew install autoconf automake apple-gcc42
Error: autoconf-2.69 already installed
Error: automake-1.12.6 already installed
Error: apple-gcc42-4.2.1-5666.3 already installed
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew remove autoconf automake apple-gcc42
Uninstalling /usr/local/Cellar/autoconf/2.69...
Uninstalling /usr/local/Cellar/automake/1.12.6...
Uninstalling /usr/local/Cellar/apple-gcc42/4.2.1-5666.3...
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew install autoconf automake apple-gcc42
==> Downloading http://ftpmirror.gnu.org/autoconf/autoconf-2.69.tar.gz
Already downloaded: /Library/Caches/Homebrew/autoconf-2.69.tar.gz
==> Patching
patching file bin/autoreconf.in
==> ./configure --prefix=/usr/local/Cellar/autoconf/2.69
==> make install
/usr/local/Cellar/autoconf/2.69: 69 files, 2.0M, built in 13 seconds
==> Downloading http://ftpmirror.gnu.org/automake/automake-1.12.6.tar.gz
Already downloaded: /Library/Caches/Homebrew/automake-1.12.6.tar.gz
==> ./configure --prefix=/usr/local/Cellar/automake/1.12.6
==> make install
/usr/local/Cellar/automake/1.12.6: 130 files, 2.1M, built in 16 seconds
==> Downloading http://r.research.att.com/tools/gcc-42-5666.3-darwin11.pkg
Already downloaded: /Library/Caches/Homebrew/apple-gcc42-4.2.1-5666.3.pkg
==> Caveats
NOTE:
This formula provides components that were removed from XCode in the 4.2
release. There is no reason to install this formula if you are using a
version of XCode prior to 4.2.
This formula contains compilers built from Apple's GCC sources, build
5666.3, available from:
http://opensource.apple.com/tarballs/gcc
All compilers have a `-4.2` suffix. A GFortran compiler is also included.
==> Summary
/usr/local/Cellar/apple-gcc42/4.2.1-5666.3: 104 files, 75M, built in 5 seconds
Adam-Zerners-MacBook-Pro:~ adamzerner$ rvm pkg install openssl
Fetching openssl-1.0.1c.tar.gz to /Users/adamzerner/.rvm/archives
Extracting openssl to /Users/adamzerner/.rvm/src/openssl-1.0.1c
Configuring openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Compiling openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Error running 'make', please read /Users/adamzerner/.rvm/log/openssl/make.log
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Updating openssl certificates
Error running 'update_openssl_certs', please read /Users/adamzerner/.rvm/log/openssl.certs.log
Adam-Zerners-MacBook-Pro:~ adamzerner$ CC=/usr/local/bin/gcc-4.2 rvm reinstall 1.9.3 --patch falcon --force-autoconf -j 3
Removing /Users/adamzerner/.rvm/src/ruby-1.9.3-p327...
/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 has already been removed.
Fetching yaml-0.1.4.tar.gz to /Users/adamzerner/.rvm/archives
Extracting yaml to /Users/adamzerner/.rvm/src/yaml-0.1.4
Configuring yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running './configure --prefix=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/configure.log
Compiling yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running 'make -j3', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/make.log
Installing Ruby from source to: /Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327, this may take a while depending on your cpu(s)...
ruby-1.9.3-p327 - #downloading ruby-1.9.3-p327, this may take a while depending on your connection...
ruby-1.9.3-p327 - #extracting ruby-1.9.3-p327 to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327
ruby-1.9.3-p327 - #extracted to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327
Applying patch /Users/adamzerner/.rvm/patches/ruby/1.9.3/p327/falcon.diff
ruby-1.9.3-p327 - #autoreconf-f
ruby-1.9.3-p327 - #configuring
Error running './configure --enable-shared --disable-install-doc --prefix=/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 --with-opt-dir=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/configure.log
There has been an error while running configure. Halting the installation.
Adam-Zerners-MacBook-Pro:~ adamzerner$ ruby -v
ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin12.0]
Adam-Zerners-MacBook-Pro:~ adamzerner$
I've successfully downloaded Ruby 1.9.3 now!
I think the problem was that I hadn't downloaded Command Line Tools from XCode. See http://robots.thoughtbot.com/post/27985816073/the-hitchhikers-guide-to-riding-a-mountain-lion
note that for whoami, it's using the backtick key, which is right above the tab key. It is NOT using quotes.
After I downloaded Command Line Tools, I then typed in rvm install 1.9.3. I got the same "long thing" as before, but at that point I had everything I needed, so I just pressed q to continue, and ruby 1.9.3 was successfully installed!
note: although it was successfully installed, when I typed ruby -v, it still said it was 1.8.7 even though it wasn't. However, after closing and reopening the terminal, it then said that the version was indeed 1.9.3.
I am getting the following error when trying to run several executables:
/lib/libc.so.6: version `GLIBC_2.7' not found (required by .tools/bridge/bridge)
I have recently upgraded from CentOS 5.3 to 5.7 (I am required to run these tools on CentOS 5, so I can't upgrade to 6).
I recompiled the whole code but this error still appears.
Has anyone encountered this type of error?
Thanks,
Claudiu
The error means that you built .tools/bridge/bridge on a system with glibc-2.7 (or later), and are trying to run it on a system that has glibc-2.6 or earlier.
Linux (and most UNIXes) does not support "build on later, run on earlier"; only the reverse scenario is supported.
See also this answer.
The 'glibc' is not the latest version, and you can try to update glibc package.
yum install glibc
or
yum install glibc-2.7
I am following This Tutorial on installing MGTwitterEngine on my MAC osx 10.6.2.
I am stuck on this step:
sudo port install cmake
it gives me the following error:
dlopen(/opt/local/share/macports/Tcl/pextlib1.0/Pextlib.dylib, 10): no suitable image found. Did find:
/opt/local/share/macports/Tcl/pextlib1.0/Pextlib.dylib: no matching architecture in universal wrapper
while executing
"load /opt/local/share/macports/Tcl/pextlib1.0/Pextlib.dylib"
("package ifneeded Pextlib 1.0" script)
invoked from within
"package require Pextlib 1.0"
(file "/opt/local/bin/port" line 40)
Rex-MacBook-Pro:~ Rex$
Thus, I cannot use TERMINAL to install YAJL to get my app to build. Help needed.
P.S.
In terminal preferences, Shells Open With is either /usr/bin/login or /bin/bash
YAJL is supposedly installed at /Users/Rex
I am using OSX 10.6.2
Solution was that my OS is snow leopard and the version of Xcode i was using was not. Re-installing the proper xcode update solved it.