I am at the beginning steps of using BTStack for Bluetooth connectivity based on RFCOMM protocol (between hardware approved by Apple MFi program & iPhone).
My question is that will Apple approve apps using BTStack? If not, what are the alternatives of BTStack. The main purpose to use BTStack is to implement RFCOMM.
Thanks in advanced.
BTstack-based apps require a JB device and Apple won’t approve such an app (as it won’t run on the 90+% of devices without a JB, motivates JB etc..)
BTstack cannot work inside a regular sandboxed app as it's not possible to access the Bluetooth module.
There is no way to use RFCOMM on an unmodified iOS device. The closest alternative to get RFCOMM like channel is to build your own MfI device (well, that will take time and money, and a new device) and then use the ExternalAccessory framework.
The other option could be to use Bluetooth Low Energy and either simulate serial connection over it (ugly) or use a protocol more suited for attribute/value store with your device.
Related
I have written a code that transfers the data from one i-Device to another i-Device, but since Apple is coming with official unlocked devices, I want to extend the solution to transfer data from an i-Device to another platform based device.
What changes it will require? How to write this code?
Is there any reference that I can use?
Obviously you can not use the Game kit to communicate with a non-iOS devices.
You would have 2 options:
1 - Enroll the "Made for iPhone" program which allows you to create your own communication protocol, but I think you can not use bt profile for data exchange(like png,mp3..), this program is related to the development of external accessories like bt headsets etc. In this case you have to use EA Framework.
2 - If you want to develop apps for jailbroken devices, you can look at BTStack.
I've been trying to find examples on communicating with bluetooth devices on iOS and have been coming up short. As I understand it SPP is not yet supported. At the simplest level, I'd like to send a simple 1 or 0 signal to the bluetooth device I'm creating. (It's a bluetooth switch that would turn something on and off). Is there a way to cleverly do this through the HID or HFP profiles?
The short answer to your question is that you can't connect to an arbitrary Bluetooth device you may happen to have, you can only connect to a Bluetooth device that has come through Apple's licensing program (i.e. the "Made for iPod/iPhone" label). From Apple's documentation:
Q: [The External Accessory framework allows] my application to communicate with Bluetooth devices. So why doesn't my application see the Bluetooth accessory sitting next to my iPhone?
A: The External Accessory framework is designed to allow iOS applications to communicate only with hardware accessories that are developed under Apple's MFi licensee program.
So there is no public API for accessing an arbitrary Bluetooth device from within iOS: you have to go through the External Accessory Framework to communicate via Bluetooth, and the EAF's mission is "communicate with MFi devices," not "communicate with arbitrary external devices." A sufficiently ingenious developer could probably hack something in there, but -
it's a non-trivial undertaking
you are spectacularly unlikely to get past the App Store approval process
So there's just not much percentage in it - the effort of doing so is unlikely to reward you.
If there already exists an MFi device that can be coerced into doing something that you want, that's probably your best chance - short of going through the MFi approval/licensing process yourself, of course. If you want to do so, have at it and good luck.
I'm answering this question late because Zeroxide's answer is incorrect (you can use a random Bluetooth keyboard with your iOS device because Apple implemented that connection, which is different from giving you a public API path to doing likewise) and I find Rokridi's answer to be incomplete-though-headed-in-the-right-direction.
Edit: A caveat has since been added to the linked Apple page about Bluetooth Low-Energy devices. So there's a loophole, but it's not a big one because very, very few Bluetooth LE devices have actually been produced as yet.
As far as i know, if your external device is non iOs device then you should use External Accessory Framework to communicate your application with it. Threfore, you external device should be certified by Apple through the Made for Ipod program (MFI). Hope this helps.
If you want to use classic Bluetooth (not BLE), then you have to first PAIR the iOS device to the Bluetooth device (in Settings). If you can't do that then you can't communicate with it with your app.
NO. whether device is MFi certified or not, you can connect device to iphone if bluetooth profile is HFP, or HID's (ordinary profiles. not iAP profile). Think about bluetooth headset or keyboard. does it need MFi mark on it to use? NO. Never.
Is it possible to identify devices around me that have their bluetouth enabled?
I don't need to communicate with them, just know they are there.
I am looking for something similar to android's BluetouthDevice.startDiscovery()
Is something like this possible?
Apple turns out to be very restrictive about Bluetooth communications for iOS platform.
Focusing about a native application with Xcode (but not PhoneGap based - PhoneGap is a Xcode plugin that allows web apps to be converted into native ones; btw it gives a quite nice but limited access to underlying hardware resources) for a iOS device to communicate with bluetooth devices (even with discovery actions) the following conditions have to be met:
-) The device you're trying to discover must be equipped with Apple Bluetooth authentication chip (you can ask to Apple directly for the MFi program);
-) Internally your app must declare a protocol name (e.g.: net.yourcompany.proto0) which the devices you connect with must conform to;
-) You must use Apple's External Accessory Framework to establish communication with such devices.
In short, by this procedure Apple guarantees that the only Bluetooth communications an iOS device can establish are just with authorized and certified Bluetooth devices.
I've gone 400 Mph about this thing but I hope it can give you some pointer to start your search.
The topic is too wide to be treated here in its full length.
One thing you might want to look into is Bonjour and NSNetServiceBrowser.
You can publish a service and also search for other services around you. There are ways to run Bonjour in the background (http://stackoverflow.com/questions/6345554/bonjour-in-the-background).
The only limitation with this approach is that everyone else would also need to be running the app as well. Also, by default Bonjour discovers over both WiFi and Bluetooth, something else you would probably need to look into.
I'm in the process of planning out a personal project that will be a media player and one of the things I would like to do is be able to dock my iPod touch (or any iPod or iPhone) and control it and play music off it like the speaker docs do that you can buy.
I found some information while searching around online for this but my question is can I make up a cable and use the serial protocol from any device or does Apple have this locked down so only certified/approved devices can communicate this way?
If you are looking to do this for yourself, I would recommend jailbreaking and the following resources on the web. These describe some methods of the Apple Accessory Protocol, and include some parts (at sparkfun) to execute. To get approved for the Apple method you need a corporation (or similar structure) and even legal counsel before you can get approved to even see the agreement you have to agree to in order to join.
http://nuxx.net/wiki/Apple_Accessory_Protocol
http://www.sparkfun.com/categories/101
There are even some great articles out there such as:
http://courses.cit.cornell.edu/ee476/FinalProjects/s2007/awr8_asl45/awr8_asl45/index.html
Good luck!
EDIT:
Since this is a relatively popular post, keep in mind that you can now use Bluetooth 4.0 LE for serial communication without approval from Apple (other than AppStore approval).
https://developer.apple.com/library/ios/documentation/NetworkingInternetWeb/Conceptual/CoreBluetooth_concepts/AboutCoreBluetooth/Introduction.html
Only devices in the Made for iPod program which use Apple's proprietary authentication chip can communicate with the External Accessory framework on the iPhone or iPod touch. Such devices must also expose a protocol that iPhone applications can use.
It is a reasonably involved process to be approved as a Made for iPod vendor of products (similar to the App Store approval process, but for hardware), but it has become a lot easier than it used to be. With iPhone OS 3.0, Apple has opened up the program to many more third parties than just the usual large accessory providers.
In your case, I'd actually wait and use another vendor's iPhone-controllable stereo. Manufacturers are just starting to come out with hardware controllable via iPhone applications, so it's only a matter of time before one of the larger accessory providers creates something like what you want. If they expose a protocol for controlling the device, all you'll have to do is write your application to control the device via that protocol.
I'm in the process of getting hardware for an iPhone prototype, and I'm wondering if it's possible to access bluetooth (ExternalAccessory, Bonjour or GameKit) exposed by development box (eg. a macbook) using the SDK's simulator as of the latest version (3.1.3 at the time of writing)
Before I get any answers on the subject, I accept that I will need an iPhone for the actual development - this is simply a prototype.
I'm not sure I understand your question entirely.
I can state that in iOS (as of May 2011) the only access you have to bonjour is through the Gamekit functionality. That functionality is fairly robust, but (for instance) you will not be able to create a BT based bonjour service that other non-iOS BT enabled devices can find.
On the simulator, even if the underlying device HAS bluetooth capabilities, you will NOT be able to perform "real" bluetooth operations. Instead the simulator will simulate some capabilities, and ignore others. You really do need multiple devices to load your code onto and run, in order to test out BT code.
Bluetooth connectivity is inaccessible using the Simulator. If WiFi is good enough for you, that works with Bonjour and GameKit on the Simulator as well. Otherwise, just like for the accelerometer and several other components of the device, you will need an actual device.